Objective:To analyze the learning curve of TiRobot-assisted lumbar pedicle screw fixation (LPSF) by cumulative sum (CUSUM) test method.Methods:The clinical data of 50 patients who underwent TiRobot-assisted LPSF from January 2020 to December 2022 in Beijing Friendship Hospital, Capital Medical University were retrospectively analyzed. CUSUM analysis and learning curve fitting were performed with robot usage time as the main indicator with the time for each step refined (robot registration time, path planning time and guide wire placement time), to select the best learning curve fitting model with the R2 value closest to 1. Using the turning point of the learning curve as the boundary, the learning curve was divided into two stages as learning stage and maturity stage, and then the observation indexes were compared between the two stages. Results:All 50 patients successfully completed the surgery without perioperative complications, with a total of 244 pedicle screws implanted. The total robot usage time and robot registration time showed a gradually decreasing trend with the increase of case number, and the learning curves were successfully fitted and reached their peaks at the seventeenth and thirteenth cases respectively. The entire learning process was divided into learning stage (17 cases) and maturity stage (33 cases) based on the turning point of the learning curve of total robot usage time. The path planning time and guide wire placement time did not show significant changes with the increase in the case number. The total robot usage time, robot registration time and the intraoperative blood loss in the learning stage were significantly higher than those in the maturity stage: (35.35 ± 1.58) min vs. (30.61 ± 0.43) min, (20.83 ± 1.56) min vs. (14.94 ± 0.29) min and 400 (150, 500) ml vs. 200 (110, 300) ml, the guide wire placement time of per screw was significantly lower than that in the maturity stage: 2.00 (1.83, 2.34) min/screw vs. 2.33 (2.13, 2.69) min/screw, and there were statistical differences ( P<0.05 or <0.01). There were no statistical difference in the path planning time, path planning time of per screw, guide wire placement time and the accuracy of screw placement between two stages ( P>0.05). Conclusions:TiRobot-assisted LPSF is a new technology with safety and effectiveness, and it has a relatively short learning curve. To achieve technological maturity, at least 17 surgeries are required with accumulated experience, and the robot registration is the main step of the learning process. After reaching maturity stage, the robot usage time is significantly shortened and intraoperative trauma is significantly reduced while the relatively high screw placement accuracy is ensured.

Objective:To evaluate the effect of acupuncture on postoperative delirium (POD) in diabetic patients undergoing surgery under general anesthesia.Methods:In this randomized controlled trial, 92 diabetic patients of either sex, aged 30-80 yr, with a body mass index of 18-28 kg/m 2, of American Society of Anesthesiologists Physical Status classification Ⅱ or Ⅲ, scheduled for elective surgery under general anesthesia, were divided into 2 groups ( n=46 each) using a table of random numbers: control group (group C) and acupuncture group (group A). Group A received acupuncture at the Baihui (GV20), Shenting (GV24) and Sishencong (EX-HN1) acupoints before anesthesia. The needles were retained for 30 min, with manual stimulation applied every 10 min for 10 s each time. After 4 stimulations, routine anesthesia was carried out. Group C received routine anesthesia only. Regional cerebral oxygen saturation was recorded on admission to the operating room (T 0), after anesthesia induction (T 1), at the start of surgery (T 2), at the end of surgery (T 3), and immediately after tracheal extubation (T 4). The POD developed within 3 days after surgery was assessed. The occurrence of needle-related adverse effects such as fainting, subcutaneous bleeding, and local paresthesia was recorded. Results:Compared with group C, the incidence of POD was significantly reduced, and the regional cerebral oxygen saturation was increased at T 1, 4 in group A ( P<0.05). Conclusions:Acupuncture can decrease the development of POD in diabetic patients undergoing surgery under general anesthesia, which is related to an increase in regional cerebral oxygen saturation.

Objective:To investigate the expression of LINC01088 in breast cancer and its effects on cell prolifera-tion,migration,and invasion.Methods:GEPIA and bc-GenExMiner were used to analyze the correlation between LINC01088 expression levels and clinical characteristics as well as prognosis.The expression of LINC01088 in MCF10A and MDA-MB-231,BT-549,MCF7 were detected by Real-time PCR.The effect of LINC01088 on the biological func-tion of breast cancer cells was examined by overexpressing LINC01088 in breast cancer cells.Cell proliferation was as-sessed using the Incucyte assay,while cell migration and invasion were evaluated using Transwell assays.Western blot-ting was employed to detect the expression of proteins associated with cell proliferation and metastasis.Results:LINC01088 expression was significantly lower in breast cancer tissues compared to normal breast tissues(P<0.05).Data from the bc-GenExMiner database revealed higher LINC01088 expression in HER2 positive patients(P<0.0001),corre-lating with longer overall survival(P=0.0006)and disease-free survival(P=0.0002).The mRNA expression level of LINC01088 in normal breast epithelial cell line was higher than that in breast cancer cell lines(P<0.05).Overexpression of LINC01088 significantly reduced proliferation,migration,and invasion in three breast cancer cell lines(P<0.01).Addi-tionally,LINC01088 upregulated p21 and p27(P<0.01),while downregulating Snail,Slug,PI3K,and phosphorylated Akt(P<0.05).Conclusion:LINC01088 expression was significantly reduced in human breast cancer.In vitro,LINC01088 in-hibited the proliferation,migration,and invasion of breast cancer cells.This effect may be attributed to its role in sup-pressing the PI3K-AKT pathway and epithelial-mesenchymal transition.

Objective:To investigate the expression of LINC01088 in breast cancer and its effects on cell prolifera-tion,migration,and invasion.Methods:GEPIA and bc-GenExMiner were used to analyze the correlation between LINC01088 expression levels and clinical characteristics as well as prognosis.The expression of LINC01088 in MCF10A and MDA-MB-231,BT-549,MCF7 were detected by Real-time PCR.The effect of LINC01088 on the biological func-tion of breast cancer cells was examined by overexpressing LINC01088 in breast cancer cells.Cell proliferation was as-sessed using the Incucyte assay,while cell migration and invasion were evaluated using Transwell assays.Western blot-ting was employed to detect the expression of proteins associated with cell proliferation and metastasis.Results:LINC01088 expression was significantly lower in breast cancer tissues compared to normal breast tissues(P<0.05).Data from the bc-GenExMiner database revealed higher LINC01088 expression in HER2 positive patients(P<0.0001),corre-lating with longer overall survival(P=0.0006)and disease-free survival(P=0.0002).The mRNA expression level of LINC01088 in normal breast epithelial cell line was higher than that in breast cancer cell lines(P<0.05).Overexpression of LINC01088 significantly reduced proliferation,migration,and invasion in three breast cancer cell lines(P<0.01).Addi-tionally,LINC01088 upregulated p21 and p27(P<0.01),while downregulating Snail,Slug,PI3K,and phosphorylated Akt(P<0.05).Conclusion:LINC01088 expression was significantly reduced in human breast cancer.In vitro,LINC01088 in-hibited the proliferation,migration,and invasion of breast cancer cells.This effect may be attributed to its role in sup-pressing the PI3K-AKT pathway and epithelial-mesenchymal transition.

Metabolic-associated fatty liver disease (MAFLD) and osteoporosis (OP) are two very common metabolic diseases. A growing body of experimental evidence supports a pathophysiological link between MAFLD and OP. MAFLD is often associated with the development of OP. Rutaecarpine (RUT) is one of the main active components of Chinese medicine Euodiae Fructus. Our previous studies have demonstrated that RUT has lipid-lowering, anti-inflammatory and anti-atherosclerotic effects, and can improve the OP of rats. However, whether RUT can improve both fatty liver and OP symptoms of MAFLD mice at the same time remains to be investigated. In this study, we used C57BL/6 mice fed a high-fat diet (HFD) for 4 months to construct a MAFLD model, and gave the mice a low dose (5 mg·kg^-1) and a high dose (15 mg·kg^-1) of RUT by gavage for 4 weeks. The effects of RUT on liver steatosis and bone metabolism were then evaluated at the end of the experiment [this experiment was approved by the Experimental Animal Ethics Committee of Institute of Medicinal Biotechnology, Chinese Academy of Medical Sciences (approval number: IMB-20190124D₃03)]. The results showed that RUT treatment significantly reduced hepatic steatosis and lipid accumulation, and significantly reduced bone loss and promoted bone formation. In summary, this study shows that RUT has an effect of improving fatty liver and OP in MAFLD mice.

Objective:To explore the risk factors of pneumoconiosis complicated with pulmonary tuberculosis, to construct a clinical prediction model for patients with pneumoconiosis complicated with pulmonary tuberculosis, and to provide a scientific basis for the prevention of pneumoconiosis complicated with pulmonary tuberculosis.Methods:In January 2024, a total of 232 patients with pneumoconiosis (including coal workers' pneumoconiosis and silicosis) who were treated in the Department of Respiratory and Critical Care Medicine of the Third People's Hospital of Xinjiang Uygur Autonomous Region (Xinjiang Uygur Autonomous Region Occupational Disease Hospital) from January 2022 to January 2023 were randomly selected as the study subjects. Collectted basic patient information and diagnostic data. Multivariate logistic regression analysis was used to screen the risk factors related to pneumoconiosis complicated with pulmonary tuberculosis. According to the results of multivariate logistic regression analysis, a nomogram was established, and the area under the receiver operating characteristic (ROC) curve (AUC), calibration curve and decision curve analysis (DCA) were used to evaluate the predictive ability.Results:Among the 232 patients with pneumoconiosis, 73 were complicated with pulmonary tuberculosis, accounting for 31.47% (73/232). Multivariate logistic regression analysis determined that dust exposure time, type of work, smoking history, and lung function level were all risk factors for pneumoconiosis complicated with tuberculosis ( OR=10.33, 95% CI=1.92~55.66, OR=5.43, 95% CI=1.91~15.44, OR=3.10, 95% CI=1.15~8.37, OR=4.00, 95% CI=1.62~9.87; P<0.05). The constructed nomogram model has good clinical applicability when the area under the receiver operating characteristic (ROC) curve is 0.77 [95% CI (0.69, 0.73) ], the calibration curve is close to the ideal diagonal, the absolute error between the simulation curve and the actual curve is 0.03, and the DCA decision curve shows that the probability threshold of the nomogram model is 1%-90%. Conclusion:The risk of pneumoconiosis complicated with tuberculosis is high, and the risk factors of dust exposure time, smoking history, type of work and lung function level are high. This nomogram model can be used to predict the risk of pulmonary tuberculosis in patients with pneumoconiosis, which is helpful for early intervention.

Objective:To analyze the learning curve of TiRobot-assisted lumbar pedicle screw fixation (LPSF) by cumulative sum (CUSUM) test method.Methods:The clinical data of 50 patients who underwent TiRobot-assisted LPSF from January 2020 to December 2022 in Beijing Friendship Hospital, Capital Medical University were retrospectively analyzed. CUSUM analysis and learning curve fitting were performed with robot usage time as the main indicator with the time for each step refined (robot registration time, path planning time and guide wire placement time), to select the best learning curve fitting model with the R2 value closest to 1. Using the turning point of the learning curve as the boundary, the learning curve was divided into two stages as learning stage and maturity stage, and then the observation indexes were compared between the two stages. Results:All 50 patients successfully completed the surgery without perioperative complications, with a total of 244 pedicle screws implanted. The total robot usage time and robot registration time showed a gradually decreasing trend with the increase of case number, and the learning curves were successfully fitted and reached their peaks at the seventeenth and thirteenth cases respectively. The entire learning process was divided into learning stage (17 cases) and maturity stage (33 cases) based on the turning point of the learning curve of total robot usage time. The path planning time and guide wire placement time did not show significant changes with the increase in the case number. The total robot usage time, robot registration time and the intraoperative blood loss in the learning stage were significantly higher than those in the maturity stage: (35.35 ± 1.58) min vs. (30.61 ± 0.43) min, (20.83 ± 1.56) min vs. (14.94 ± 0.29) min and 400 (150, 500) ml vs. 200 (110, 300) ml, the guide wire placement time of per screw was significantly lower than that in the maturity stage: 2.00 (1.83, 2.34) min/screw vs. 2.33 (2.13, 2.69) min/screw, and there were statistical differences ( P<0.05 or <0.01). There were no statistical difference in the path planning time, path planning time of per screw, guide wire placement time and the accuracy of screw placement between two stages ( P>0.05). Conclusions:TiRobot-assisted LPSF is a new technology with safety and effectiveness, and it has a relatively short learning curve. To achieve technological maturity, at least 17 surgeries are required with accumulated experience, and the robot registration is the main step of the learning process. After reaching maturity stage, the robot usage time is significantly shortened and intraoperative trauma is significantly reduced while the relatively high screw placement accuracy is ensured.

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

OBJECTIVES: To evaluate preterm white matter injury (PWMI) in neonatal rats using multimodal magnetic resonance imaging (MRI) combined with histological assessments and to explore its underlying mechanisms. METHODS: Healthy 3-day-old Sprague-Dawley neonatal rats were randomly divided into a sham operation group and a PWMI group (n=12 in each group). A PWMI model was established in neonatal rats through hypoxia-ischemia. Laser speckle imaging was used to observe changes in cerebral oxygen saturation and blood flow at different time points post-modeling. Multimodal MRI was employed to assess the condition of white matter injury, while hematoxylin-eosin staining was utilized to observe morphological changes in the striatal area on the injured side. Immunofluorescence staining was performed to detect the proliferation and differentiation of oligodendrocyte precursor cells. RESULTS: At 0, 6, 12, 24, and 72 hours post-modeling, the relative blood flow and relative oxygen saturation on the injured side in the PWMI group were significantly lower than those in the sham operation group (P<0.05). At 24 hours post-modeling, T2-weighted imaging showed high signals in the white matter of the injured side in the PWMI group, with relative apparent diffusion coefficient values and Lorenz differential values being lower than those in the sham operation group (P<0.001); additionally, the arrangement of nerve cells in the PWMI group was disordered, and the number of EdU⁺PDGFR-α⁺ cells was higher than that in the sham operation group (P<0.001). At 28 days post-modeling, the relative fractional anisotropy values, the number of EdU⁺Olig2⁺ cells, and the fluorescence intensity of myelin basic protein and neurofilament protein 200 in the white matter region of the PWMI group were all lower than those in the sham operation group (P<0.001). CONCLUSIONS Multimodal MRI can evaluate early and long-term changes in PWMI in neonatal rat models in vivo, providing both imaging and pathological evidence for the diagnosis and treatment of PWMI in neonates. Hypoxia-ischemia inhibits the proliferation and differentiation of oligodendrocyte precursor cells in neonatal rats, leading to PWMI.
Animals ; Rats, Sprague-Dawley ; Magnetic Resonance Imaging/methods* ; Rats ; White Matter/injuries* ; Animals, Newborn ; Female ; Multimodal Imaging ; Male ; Hypoxia-Ischemia, Brain/pathology*

Objective:To evaluate the effect of acupuncture on postoperative delirium (POD) in diabetic patients undergoing surgery under general anesthesia.Methods:In this randomized controlled trial, 92 diabetic patients of either sex, aged 30-80 yr, with a body mass index of 18-28 kg/m 2, of American Society of Anesthesiologists Physical Status classification Ⅱ or Ⅲ, scheduled for elective surgery under general anesthesia, were divided into 2 groups ( n=46 each) using a table of random numbers: control group (group C) and acupuncture group (group A). Group A received acupuncture at the Baihui (GV20), Shenting (GV24) and Sishencong (EX-HN1) acupoints before anesthesia. The needles were retained for 30 min, with manual stimulation applied every 10 min for 10 s each time. After 4 stimulations, routine anesthesia was carried out. Group C received routine anesthesia only. Regional cerebral oxygen saturation was recorded on admission to the operating room (T 0), after anesthesia induction (T 1), at the start of surgery (T 2), at the end of surgery (T 3), and immediately after tracheal extubation (T 4). The POD developed within 3 days after surgery was assessed. The occurrence of needle-related adverse effects such as fainting, subcutaneous bleeding, and local paresthesia was recorded. Results:Compared with group C, the incidence of POD was significantly reduced, and the regional cerebral oxygen saturation was increased at T 1, 4 in group A ( P<0.05). Conclusions:Acupuncture can decrease the development of POD in diabetic patients undergoing surgery under general anesthesia, which is related to an increase in regional cerebral oxygen saturation.