Objective: To explore the relationship between life skills, psychological resilience and subjective well-being among primary and secondary school students, so as to provide evidence for targeted adolescent mental health education. Methods: From September to November, 2025, a total of 5 831 primary and secondary school students from five cities (Beijing, Guangzhou, Shenzhen, Chongqing, Urumqi) were selected by convenience sampling. The Adolescent Subjective Well being Scale, School based Adolescents Life Skills Scale, and Adolescent Psychological Resilience Scale were used for investigation. Data were analyzed using t-tests, one way ANOVA, and linear regression. Results: The total mean score of students subjective well being was (5.46± 0.91) ; the total mean score of life skills was (3.69±0.64); the total mean score of psychological resilience was (3.66±0.69). Statistically significant differences in subjective well being scores were found among students grouped by gender, grade, school stage, residential city, living with parents or living with siblings ( t/F =4.14, 53.92, 14.53, 49.99, 13.49, 2.18, all P <0.01). Stratified regression analyses were performed by gender (adjusting for school stage, residential city and living arrangement) and by school stage (adjusting for gender, residential city and living arrangement), the regression results indicated that life skills of boys, girls, primary school students and junior high school students( β =0.54, 0.53, 0.50, 0.57) and their psychological resilience ( β = 0.56 , 0.60, 0.56, 0.60) were positively associated with subjective well being (all P <0.01). Conclusions Life skills and psychological resilience may be important protective factors for subjective well being among primary and secondary school students. School based mental health education should emphasize life skills training and resilience building to promote students subjective well being.

Objective: To explore the association between parental subjective well-being and subjective well-being among primary and secondary school students, so as to provide evidence for promoting adolescent mental health from a family perspective. Methods: From September to November 2025, a convenience sampling method was used to recruit 4 612 students in grades 4-8 from 12 primary and secondary schools in five cities—Beijing, Guangzhou, Shenzhen, Chongqing, and Urumqi—along with their parents. Students completed the Adolescent Well being Survey Questionnaire, while parents completed the Parental Well being Survey Questionnaire. Data were analyzed using t-test, one way analysis of variance, multiple linear regression, Logistic regression, and stratified subgroup analyses. Results: The maximum score of the subjective well-being scale for primary and secondary school students was 301, with a total score of (224.07±46.63), representing 74.4% of the full score; the maximum score of the parental subjective well-being scale was 120, with a total score of (92.35±15.10), representing 77.0%. Multiple linear regression analysis showed that parental subjective well-being was positively associated with students overall subjective well-being, positive affect, and satisfaction in each domain (friendship, family, school, environment, freedom, and academics), and negatively associated with negative affect ( β =0.45, 0.08, 0.06, 0.07, 0.05, 0.04, 0.05, 0.04, -0.05, all P <0.01). Logistic regression and stratified analysis showed that parental subjective well-being was positively associated with students high subjective well-being ( OR =1.03), and the association existed in subgroups of different gender, grade and family structure ( OR =1.02-1.04) (all P <0.05). Conclusions Parental subjective well-being is positively associated with students subjective well-being. Future interventions should incorporate an integrated strategy featuring family-school collaboration to promote adolescent well-being.

The precision diagnosis and treatment of chest wall tumors heavily rely on imaging assessment, which is limited by the subjectivity of conventional methods and their insensitivity to microscopic features. Artificial intelligence (AI) technologies, particularly radiomics and deep learning, offer new opportunities to overcome these bottlenecks. It is important to note, however, that direct AI research focused specifically on chest wall tumors remains scarce. Most current insights are derived from methodological borrowing and conceptual extrapolation of studies on other solid tumors, such as lung, breast, and esophageal cancers. This review systematically outlines the potential application framework of AI in the management of chest wall tumors, encompassing benign-malignant differentiation, non-invasive pathological subtyping, early treatment response prediction, and prognosis stratification based on multi-modal imaging. It discusses the core model-building strategies and validation processes centered on data fusion, and critically analyzes the unique challenges in this field, including data scarcity, model interpretability, and clinical translation. Moving forward, key directions for translating the potential of AI into clinical reality include fostering the development of dedicated chest wall tumor datasets, conducting prospective validation studies, and exploring "imaging-genomics" integration as well as dynamic decision-support systems.

A method for determination and targeted screening of diflorasone components in health products using ultra performance liquid chromatography-quadrupole time of flight mass spectrometry(UPLC-Q-TOF/MS)was established.Four representative diflorasone and esters(diflorasone,diflorasone diacetate,diflorasone-17-propionate,and diflorasone-21-propionate)were selected to optimize the pretreatment conditions,and 10 mL of extraction solvent dosage,15 min of extraction time and 5 g of salting-out agent as the optimal conditions were selected by response surface methodology.The results showed that the four analytes exhibited good linearity within the concentration range of 2.0?100 μg/L with the chromatographic peak area,and the correlation coefficients(R2)were all greater than 0.9990,while the results of recovery and relative standard deviation could satisfy the requirements of determination.The common characteristic ions of diflorasone and esters werem/z121 andm/z335,and their specific structures were obtained by analyzing the cleavage pathway based on the optimized determination conditions.A targeted screening method for other esters of diflorasone based on characteristic ions guidance strategy was established.This method had many advantages such as high efficiency,high sensitivity and good reproducibility,and could be used for targeted screening of diflorasone and esters in health products.The developed characteristic ion guided strategy could be employed to construct mass spectral databases for various glucocorticoids,enabling comprehensive targeted screening across a broad range of compounds.

The efficient,precise,and rapid detection of trace copper ions(Cu2+)is of paramount importance in the realms of food safety,environmental monitoring,and medical health.By ingeniously utilizing the chemical properties of benzotriazole compounds in copper protection,and introducing an electrochemical reduction strategy,a silver nanoparticle composite structure supported by a nickel foam substrate was developed as an active platform for surface-enhanced Raman scattering(SERS)detection.This platform employed benzotriazole-5-carboxylic acid(BTAC)as a specific SERS probe molecule to achieve sensitive analysis of metal ion concentrations.The detection mechanism revealed a highly selective coordination between the Cu2+and the nitrogen atom in the triazole ring of BTAC,triggering subtle structural changes in the triazole ring.This was manifested by a significant and quantifiable shift in the characteristic peak of the SERS spectrum(particularly at 1001 cm-1),with a maximum shift of up to 30 cm-1.This phenomenon not only addressed the issue of reproducibility in quantitative analysis caused by the non-uniformity of SERS substrate materials but also significantly broadened the application boundaries of SERS technology for trace metal ion detection.It enabled ultra-sensitive detection of Cu2+concentrations ranging from 1×10-6 to 1×10-11 mol/L,with a detection limit as low as 1×10-11 mol/L,significantly enhancing detection sensitivity and accuracy.This work provided a novel and efficient strategy for rapid detection of trace Cu2+and enriched the application potential of SERS technology in food safety,environmental monitoring and biomedical analysis.

Nitrofurazone(NFZ)is an antibiotic that is used as a veterinary drug in aquaculture.NFZ abuse can lead to a series of environmental and health issues,making it crucial to establish a rapid and highly sensitive method for NFZ detection.In this study,platinum nanoparticle(PtNPs)-loaded zeolitic imidazolate framework(ZIF-8)was used as a precursor,and PtNPs functionalized nitrogen doped porous carbon(NC)was obtained through pyrolysis.Pt@NC was combined with multi-walled carbon nanotubes(MWCNTs)and cast onto a glassy carbon electrode(GCE)surface to construct an electroch-emical sensor.Electrochemical tests revealed that Pt@NC/WCNT/GCE exhibited an electrochemical active area of 0.066 cm2 and a heterogeneous electron transfer rate constant(k0)of 2.03×10-3 cm/s,which were higher than other materials.Compared with the electrodes modified by other materials,the NFZ generated the highest peak current of irreversible reduction peak on the Pt@NC/WCNT/GCE electrode.In comparison with Pt@ZIF-8/WCNT/GCE,after pyrolysis and carbonization treatment,the reduction current of NFZ increased by 2.19 times,and the reduction peak potential shifted positively by 19 mV simultaneously.When compared with NC/WCNT/GCE,the PtNPs in the composite material enhanced the NFZ current by 4.25 times.Additionally,the experimental conditions for detecting NFZ using the sensor were optimized,including the carbonization temperature of Pt@ZIF-8,ratio of Pt@NC to CNT,loading amount of the modified material,and electrolyte pH.Under the optimized conditions,the sensor demonstrated a linear detection range for NFZ of 0.20-240 μmol/L,a sensitivity of 9.995 μA/((μmol/L)?cm2)and a limit of detection(LOD)of 0.06 μmol/L.The sensor exhibited excellent anti-interference capability,good reproducibility,and stability,with spiked recoveries for NFZ in water samples ranging from 94.6%to 105.6%.This study provided a novel electrochemical sensing approach for NFZ detection.

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

BACKGROUND: Based on the China-VHD database, this study sought to develop and validate a Valvular Heart Disease- specific Age-adjusted Comorbidity Index (VHD-ACI) for predicting mortality risk in patients with VHD. METHODS & RESULTS: The China-VHD study was a nationwide, multi-centre multi-centre cohort study enrolling 13,917 patients with moderate or severe VHD across 46 medical centres in China between April-June 2018. After excluding cases with missing key variables, 11,459 patients were retained for final analysis. The primary endpoint was 2-year all-cause mortality, with 941 deaths (10.0%) observed during follow-up. The VHD-ACI was derived after identifying 13 independent mortality predictors: cardiomyopathy, myocardial infarction, chronic obstructive pulmonary disease, pulmonary artery hypertension, low body weight, anaemia, hypoalbuminaemia, renal insufficiency, moderate/severe hepatic dysfunction, heart failure, cancer, NYHA functional class and age. The index exhibited good discrimination (AUC, 0.79) and calibration (Brier score, 0.062) in the total cohort, outperforming both EuroSCORE II and ACCI (P < 0.001 for comparison). Internal validation through 100 bootstrap iterations yielded a C statistic of 0.694 (95% CI: 0.665-0.723) for 2-year mortality prediction. VHD-ACI scores, as a continuous variable (VHD-ACI score: adjusted HR (95% CI): 1.263 (1.245-1.282), P < 0.001) or categorized using thresholds determined by the Yoden index (VHD-ACI ≥ 9 vs. < 9, adjusted HR (95% CI): 6.216 (5.378-7.184), P < 0.001), were independently associated with mortality. The prognostic performance remained consistent across all VHD subtypes (aortic stenosis, aortic regurgitation, mitral stenosis, mitral regurgitation, tricuspid valve disease, mixed aortic/mitral valve disease and multiple VHD), and clinical subgroups stratified by therapeutic strategy, LVEF status (preserved vs. reduced), disease severity and etiology. CONCLUSION The VHD-ACI is a simple 13-comorbidity algorithm for the prediction of mortality in VHD patients and providing a simple and rapid tool for risk stratification.

A 71-year-old male presented with esophageal cancer and severe aortic valve regurgitation. Treatment strategies for such patients are controversial. Considering the risks of cardiopulmonary bypass and potential esophageal cancer metastasis, we successfully performed transcatheter aortic valve implantation and minimally invasive three-incision thoracolaparoscopy combined with radical resection of esophageal cancer (McKeown) simultaneously in the elderly patient who did not require neoadjuvant treatment. This dual minimally invasive procedure took 6 hours and the patient recovered smoothly without any surgical complications.

The Expert Consensus on Clinical Application of Qinbaohong Zhike Oral Liquid in Treatment of Acute Bronchitis and Acute Attack of Chronic Bronchitis （GS/CACM 337-2023） was released by the China Association of Chinese Medicine on December 13^th， 2023. This expert consensus was developed by experts in methodology， pharmacy， and Chinese medicine in strict accordance with the development requirements of the China Association of Chinese Medicine （CACM） and based on the latest medical evidence and the clinical medication experience of well-known experts in the fields of respiratory medicine （pulmonary diseases） and pediatrics. This expert consensus defines the application of Qinbaohong Zhike oral liquid in the treatment of cough and excessive sputum caused by phlegm-heat obstructing lung， acute bronchitis， and acute attack of chronic bronchitis from the aspects of applicable populations， efficacy evaluation， usage， dosage， drug combination， and safety. It is expected to guide the rational drug use in medical and health institutions， give full play to the unique value of Qinbaohong Zhike oral liquid， and vigorously promote the inheritance and innovation of Chinese patent medicines.