Objective To develop a novel protective ventilator circuit component and to verify its performance by water seal and anti-splash experiments.Methods A novel protective ventilator circuit component had a design scheme with the multifunctional joint,and consisted of a tee connection tube,an isolation sleeve and a stop sleeve,of which,the tee connection tube was made of polyethylene polymer material and the others were made of silicone material.The tee connection tube had a T-shaped structure with two standard connection ports,which was composed of an adapter,a sealing cap,a plug and a sealing ring;the isolation sleeve was in the shape of a cylinder with a raised bottom,which was inserted into the adapter;the stop sleeve was located in the isolation sleeve,with an inverted frustum of a cone at the bottom and a rounded hole in the middle of the inverted frustum.An open ventilator circuit tube was involved in the performance verification of the circuit component developed.In the water seal experiment,sputum aspiration was simulated and the heights of the liquid level drop in the L-shaped tubes were compared after sputum aspiration.In the anti-splash experiment,the infection rates on the surfaces of the sterile hole towels and gloves were calculated.Results Water seal experiment showed after sputum aspiration the open ventilator circuit tube had the liquid level at the L-shaped tube higher significantly than that of the circuit component;the anti-splash experiment indicated sputum aspiration resulted in the occurance of the splashing out of the secretion and 77.5%infection rate by the open ventilator circuit tube,while no splashing out and 0%infection rate by the circuit component developed.Conclusion The novel protective ventilator circuit component behaves well in sealing and anti-splashing,and thus is worthy of clinical application for sputum aspiration.[Chinese Medical Equipment Journal,2025,46(4):113-117]

The scaphoid bone is one of the important bone of hand,which is frequently injured and difficult to treat in clinical practice.Therefore,it is very important to deeply study the microstructure and biomechanical characteristics of the scaphoid bone for understanding its injury mechanism and optimizing treatment scheme.Microcomputed tomography(micro-CT)provides high-resolution imaging of bone tissue,while finite element analysis can help to simulate the stress distribution and behavioral patterns of the scaphoid bone under various physiological and pathological states.The high-resolution three-dimensional image of the scaphoid bone obtained by micro-CT technology can be used to construct finite element models of real anatomical structure of the scaphoid bone,thus achieving accurate simulation of the mechanical properties of the scaphoid bone.The fusion of these two advanced technologies provides a new perspective for revealing the structural and functional relationships and injury mechanism of the scaphoid bone.Therefore,this paper reviews the anatomical characteristics of the scaphoid bone and its biomechanical behavior in different states,emphasizing the specific applications and advantages of micro-CT and finite element analysis techniques in the study of the scaphoid bone.By summarizing the research findings in recent years,this paper provides novel scientific basis and methods for the diagnosis,treatment,and prevention of scaphoid bone-related disorders.

OBJECTIVE: To screen out the key metabolites related to diabetic foot (DF) by integrating genome-wide association studies (GWAS) and metabolome genome-wide association studies (mGWAS). METHODS: The literature databases such as PubMed and China national knowledge infrastructure(CNKI), as well as genomics databases such as PAN UKBB, FinnGen, and IEU Open GWAS were systematically retrieved from database estobilishment to November 2024 on DF-related single nucleotide polymorphisms and genome-wide association studies. DF-single nucleotide polymorphism-metabolite network was constructed by mGWAS package and mGWAS-Explorer platform. The causal relationship between key factors was evaluated by two-sample Mendelian randomization. The genetic correlation between DF and 575 metabolites (source:IEU Open GWAS) was evaluated by linkage disequilibrium score regression. In vitro experiments were conducted to induce injury of human umbilical vein endothelial cells with 30 mM glucose and intervene with 20 μM γ-tocopherol. Changes in cell migration, scratch healing and tube formation function were detected. RESULTS: Twenty-senen literatures on single nucleotide polymorphism literatures and 3 studies on GWAS were included. Genetic analysis results showed DF-related single nucleotide polymorphisms were enriched in vascular endothelial dysfunction-related pathways (such as fluid shear stress and atherosclerosis). The results of metabolic network analysis screened out 19 associated metabolites, among which 12 such as γ -tocopherol and pyruvate had significant genetic correlations with DF. Mendelian randomization suggested matrix metalloproteinase-9(MMP-9) might be a potential driver of DF (β=0.658, P=0.063 8), and the occurrence of DF could reduce the level of high-density lipoprotein (β=-0.002, P=0.015 2). The results of in vitro experiments confirmed that γ -tocopherol could improve endothelial dysfunction induced by high glucose, specifically manifested as an increase in the number of cell migrations, improvement in the scratch healing rate, and recovery of tubule formation ability (P<0.05). CONCLUSION DF has a genetic basis centered on vascular endothelial dysfunction, and its occurrence can lead to further metabolic disorders. The key single nucleotide polymorphism loci integrated provided molecular markers for the risk stratification of foot ulcers in diabetic patients. In addition, γ -tocopherol has demonstrated clinical application potential as a therapeutic drug for DF by significantly improving the function of vascular endothelial cells in a high-glucose environment.
Humans ; Diabetic Foot/drug therapy* ; Polymorphism, Single Nucleotide ; Genome-Wide Association Study ; Genomics ; Metabolomics ; Metabolome

BACKGROUND: The association of systemic inflammatory response index (SIRI) with prognosis of coronary artery disease (CAD) patients has never been investigated in a large sample with long-term follow-up. This study aimed to explore the association of SIRI with all-cause and cause-specific mortality in a nationally representative sample of CAD patients from United States. METHODS: A total of 3386 participants with CAD from the National Health and Nutrition Examination Survey (NHANES) 1999-2018 were included in this study. Cox proportional hazards model, restricted cubic spline (RCS), and receiver operating characteristic curve (ROC) were performed to investigate the association of SIRI with all-cause and cause-specific mortality. Piece-wise linear regression and sensitivity analyses were also performed. RESULTS: During a median follow-up of 7.7 years, 1454 all-cause mortality occurred. After adjusting for confounding factors, higher lnSIRI was significantly associated with higher risk of all-cause (HR = 1.16, 95% CI: 1.09-1.23) and CVD mortality (HR = 1.17, 95% CI: 1.05-1.30) but not cancer mortality (HR = 1.17, 95% CI: 0.99-1.38). The associations of SIRI with all-cause and CVD mortality were detected as J-shaped with threshold values of 1.05935 and 1.122946 for SIRI, respectively. ROC curves showed that lnSIRI had robust predictive effect both in short and long terms. CONCLUSIONS SIRI was independently associated with all-cause and CVD mortality, and the dose-response relationship was J-shaped. SIRI might serve as a valid predictor for all-cause and CVD mortality both in the short and long terms.

Objective To develop a novel protective ventilator circuit component and to verify its performance by water seal and anti-splash experiments.Methods A novel protective ventilator circuit component had a design scheme with the multifunctional joint,and consisted of a tee connection tube,an isolation sleeve and a stop sleeve,of which,the tee connection tube was made of polyethylene polymer material and the others were made of silicone material.The tee connection tube had a T-shaped structure with two standard connection ports,which was composed of an adapter,a sealing cap,a plug and a sealing ring;the isolation sleeve was in the shape of a cylinder with a raised bottom,which was inserted into the adapter;the stop sleeve was located in the isolation sleeve,with an inverted frustum of a cone at the bottom and a rounded hole in the middle of the inverted frustum.An open ventilator circuit tube was involved in the performance verification of the circuit component developed.In the water seal experiment,sputum aspiration was simulated and the heights of the liquid level drop in the L-shaped tubes were compared after sputum aspiration.In the anti-splash experiment,the infection rates on the surfaces of the sterile hole towels and gloves were calculated.Results Water seal experiment showed after sputum aspiration the open ventilator circuit tube had the liquid level at the L-shaped tube higher significantly than that of the circuit component;the anti-splash experiment indicated sputum aspiration resulted in the occurance of the splashing out of the secretion and 77.5%infection rate by the open ventilator circuit tube,while no splashing out and 0%infection rate by the circuit component developed.Conclusion The novel protective ventilator circuit component behaves well in sealing and anti-splashing,and thus is worthy of clinical application for sputum aspiration.[Chinese Medical Equipment Journal,2025,46(4):113-117]

The scaphoid bone is one of the important bone of hand,which is frequently injured and difficult to treat in clinical practice.Therefore,it is very important to deeply study the microstructure and biomechanical characteristics of the scaphoid bone for understanding its injury mechanism and optimizing treatment scheme.Microcomputed tomography(micro-CT)provides high-resolution imaging of bone tissue,while finite element analysis can help to simulate the stress distribution and behavioral patterns of the scaphoid bone under various physiological and pathological states.The high-resolution three-dimensional image of the scaphoid bone obtained by micro-CT technology can be used to construct finite element models of real anatomical structure of the scaphoid bone,thus achieving accurate simulation of the mechanical properties of the scaphoid bone.The fusion of these two advanced technologies provides a new perspective for revealing the structural and functional relationships and injury mechanism of the scaphoid bone.Therefore,this paper reviews the anatomical characteristics of the scaphoid bone and its biomechanical behavior in different states,emphasizing the specific applications and advantages of micro-CT and finite element analysis techniques in the study of the scaphoid bone.By summarizing the research findings in recent years,this paper provides novel scientific basis and methods for the diagnosis,treatment,and prevention of scaphoid bone-related disorders.

Patent foramen ovale(PFO)is an important risk factor for cardiogenic stroke.With the rapid development of cardiac interventional techniques,PFO occluder has become the first choice for the treatment of PFO.The biocompatibility,mechanical stability of the occluder material and its adaptability to the patient's anatomical structure are key factors in determining the therapeutic effect.Remarkable progress has been made in its research.In the early stage,the occluder was mainly made of metal material.Although it has high sealing effect and operation convenience,there is potential risk of long-term retention in the body.In recent years,biodegradable materials have been widely used in the field of sealers,such sealers are made of biomedical polymer materials,implanted into the human body to play a temporary bridge role,guide self-tissue bioremediation,and gradually degrade into harmless substances discharged from the body,avoiding the long-term retention of metal sealers.This paper reviews the research progress of PFO occluder materials,including the application of non-degradable materials and biodegradable materials,and discusses the limitations of the current research and the possible development trend in the future,so as to provide reference for clinical application.

In recent years, nucleic acid therapy, as a revolutionary therapeutic tool, has shown great potential in the treatment of genetic diseases, infectious diseases and cancer. Lipid nanoparticles (LNPs) are currently the most advanced mRNA delivery carriers, and their emergence is an important reason for the rapid approval and use of COVID-19 mRNA vaccines and the development of mRNA therapy. Currently, mRNA therapeutics using LNP as a carrier have been widely used in protein replacement therapy, vaccines and gene editing. Conventional LNP is composed of four components: ionizable lipids, phospholipids, cholesterol, and polyethylene glycol (PEG) lipids, which can effectively load mRNA to improve the stability of mRNA and promote the delivery of mRNA to the cytoplasm. However, in the face of the complexity and diversity of clinical diseases, the structure, properties and functions of existing LNPs are too homogeneous, and the lack of targeted delivery capability may result in the risk of off-targeting. LNPs are flexibly designed and structurally stable vectors, and the adjustment of the types or proportions of their components can give them additional functions without affecting the ability of LNPs to deliver mRNAs. For example, by replacing and optimizing the basic components of LNP, introducing a fifth component, and modifying its surface, LNP can be made to have more precise targeting ability to reduce the side effects caused by treatment, or be given additional functions to synergistically enhance the efficacy of mRNA therapy to respond to the clinical demand for nucleic acid therapy. It is also possible to further improve the efficiency of LNP delivery of mRNA through machine learning-assisted LNP iteration. This review can provide a reference method for the rational design of engineered lipid nanoparticles delivering mRNA to treat diseases.

The compound (E)-1-(4-(3-(5-chloro-6-oxo-3,6-dihydropyridin-1(2H)-yl)-3-oxo-propyl-1-ene-1-yl) phenyl)-3-(4-fluorophenyl) urea (C12), a novel derivative of piperlongumine previously synthesized by our research group, was investigated in this study to examine its effects on human non-small cell lung cancer cell line H1299 in vitro and elucidate its potential mechanism of action. The impact of C12 on the proliferation, migration, and invasion abilities of H1299 cells were assessed using methyl thiazolyl tetrazolium (MTT) assay, wound healing assay, cloning formation assay, and Transwell assay. Flow cytometry was employed to evaluate the influence of C12 on cell cycle progression, reactive oxygen species (ROS) production, mitochondrial membrane potential (MMP), and apoptosis induction in H1299 cells. Western blot analysis was conducted to investigate the expression levels of p21, Cyclin B1, CDK1, Bax, Bcl-2, JNK, p-JNK, Erk1/2, p-Erk1/2, p38 and p-p38 proteins for exploring the anti-tumor mechanism underlying C12's actions. The results demonstrated that C12 exerted inhibitory effects on the proliferation, migration, and invasion capacities of H1299 cells in a time-dependent and concentration-dependent manner. Moreover, C12 induced G2/M phase arrest in the cell cycle, reduced MMP levels, elevated ROS production, and triggered apoptotic processes. Flow cytometry analysis revealed that C12 downregulated Cyclin B1 and CDK1 protein expressions, resulting in G2/M phase arrest. C12 also upregulated Bax/Bcl-2 ratio, promoting apoptosis. Furthermore, C12 activated MAPK signaling pathway by enhancing phosphorylation levels of JNK, Erk1/2, and p38 proteins. In conclusion, C12 significantly suppressed proliferation, migration, and invasion capabilities while inducing cell cycle arrest and apoptosis in H1299 cells. These effects may be attributed to activation of the MAPK signaling pathway.

Objective To observe the effect of multi-modal hand hygiene(HH)intervention on HH compliance,as well as the relationship between HH compliance and the healthcare-associated(HA)case infection incidence.Methods From 2014 to 2022,the infection control team in a tertiary first-class hospital implemented multi-modal HH intervention for health care workers(HCWs).The changing trend of HH monitoring data,the correlation be-tween HH compliance rate and HA case infection incidence were analyzed retrospectively.Results The consump-tion of HH products in the wards showed a stable upward trend;HH compliance rate increased from 64.98％in 2014 to 85.01％in 2022(P＜0.001),and HA case infection incidence decreased from 1.21％to 0.83％(P＜0.05).HH compliance rate was negatively correlated with HA case infection incidence(r=-0.369,P=0.027).HH compliance rates in different regions and job posts in each quarter were increased(P＜0.001).For 5 different HH moments in each quarter,HH compliance rate fluctuated slightly before sterile manipulation and after touching patient;presented rising trend after touching surroundings around patient,and decreased before touching patient and after touching patient's body fluid since 2020(P＜0.001).Conclusion Multi-modal HH intervention can im-prove the HH compliance of HCWs,improving their HH awareness is conducive to reducing HA case infection incidence.