[This corrects the article DOI: 10.1016/j.apsb.2022.05.019.].

Objective:To analyze the learning curve of TiRobot-assisted lumbar pedicle screw fixation (LPSF) by cumulative sum (CUSUM) test method.Methods:The clinical data of 50 patients who underwent TiRobot-assisted LPSF from January 2020 to December 2022 in Beijing Friendship Hospital, Capital Medical University were retrospectively analyzed. CUSUM analysis and learning curve fitting were performed with robot usage time as the main indicator with the time for each step refined (robot registration time, path planning time and guide wire placement time), to select the best learning curve fitting model with the R2 value closest to 1. Using the turning point of the learning curve as the boundary, the learning curve was divided into two stages as learning stage and maturity stage, and then the observation indexes were compared between the two stages. Results:All 50 patients successfully completed the surgery without perioperative complications, with a total of 244 pedicle screws implanted. The total robot usage time and robot registration time showed a gradually decreasing trend with the increase of case number, and the learning curves were successfully fitted and reached their peaks at the seventeenth and thirteenth cases respectively. The entire learning process was divided into learning stage (17 cases) and maturity stage (33 cases) based on the turning point of the learning curve of total robot usage time. The path planning time and guide wire placement time did not show significant changes with the increase in the case number. The total robot usage time, robot registration time and the intraoperative blood loss in the learning stage were significantly higher than those in the maturity stage: (35.35 ± 1.58) min vs. (30.61 ± 0.43) min, (20.83 ± 1.56) min vs. (14.94 ± 0.29) min and 400 (150, 500) ml vs. 200 (110, 300) ml, the guide wire placement time of per screw was significantly lower than that in the maturity stage: 2.00 (1.83, 2.34) min/screw vs. 2.33 (2.13, 2.69) min/screw, and there were statistical differences ( P<0.05 or <0.01). There were no statistical difference in the path planning time, path planning time of per screw, guide wire placement time and the accuracy of screw placement between two stages ( P>0.05). Conclusions:TiRobot-assisted LPSF is a new technology with safety and effectiveness, and it has a relatively short learning curve. To achieve technological maturity, at least 17 surgeries are required with accumulated experience, and the robot registration is the main step of the learning process. After reaching maturity stage, the robot usage time is significantly shortened and intraoperative trauma is significantly reduced while the relatively high screw placement accuracy is ensured.

The quality of drugs is a crucial premise for ensuring the safety and effectiveness of clinical medication, while quality control during the pharmaceutical process directly affects the quality and consistency of the final product formulation. However, there is a lack of a comprehensive and scientific system for assessing and optimizing the quality control level during the manufacturing process in the field of drug quality control. Therefore, this study proposed the concept of "pharmaceutical process omics", clarified its advantages in guiding drug production, and explored in depth the research approaches, diverse analytical techniques, and broad range of applications in drug quality control. In addition, this study anticipated the broad application prospects of pharmaceutical process omics in the field of drug quality control, aiming to provide a scientific basis for the development of pharmaceutical process quality control standards.
Quality Control ; Humans ; Drugs, Chinese Herbal/chemistry*

BACKGROUND: Based on the China-VHD database, this study sought to develop and validate a Valvular Heart Disease- specific Age-adjusted Comorbidity Index (VHD-ACI) for predicting mortality risk in patients with VHD. METHODS & RESULTS: The China-VHD study was a nationwide, multi-centre multi-centre cohort study enrolling 13,917 patients with moderate or severe VHD across 46 medical centres in China between April-June 2018. After excluding cases with missing key variables, 11,459 patients were retained for final analysis. The primary endpoint was 2-year all-cause mortality, with 941 deaths (10.0%) observed during follow-up. The VHD-ACI was derived after identifying 13 independent mortality predictors: cardiomyopathy, myocardial infarction, chronic obstructive pulmonary disease, pulmonary artery hypertension, low body weight, anaemia, hypoalbuminaemia, renal insufficiency, moderate/severe hepatic dysfunction, heart failure, cancer, NYHA functional class and age. The index exhibited good discrimination (AUC, 0.79) and calibration (Brier score, 0.062) in the total cohort, outperforming both EuroSCORE II and ACCI (P < 0.001 for comparison). Internal validation through 100 bootstrap iterations yielded a C statistic of 0.694 (95% CI: 0.665-0.723) for 2-year mortality prediction. VHD-ACI scores, as a continuous variable (VHD-ACI score: adjusted HR (95% CI): 1.263 (1.245-1.282), P < 0.001) or categorized using thresholds determined by the Yoden index (VHD-ACI ≥ 9 vs. < 9, adjusted HR (95% CI): 6.216 (5.378-7.184), P < 0.001), were independently associated with mortality. The prognostic performance remained consistent across all VHD subtypes (aortic stenosis, aortic regurgitation, mitral stenosis, mitral regurgitation, tricuspid valve disease, mixed aortic/mitral valve disease and multiple VHD), and clinical subgroups stratified by therapeutic strategy, LVEF status (preserved vs. reduced), disease severity and etiology. CONCLUSION The VHD-ACI is a simple 13-comorbidity algorithm for the prediction of mortality in VHD patients and providing a simple and rapid tool for risk stratification.

Functional dyspepsia (FD), characterized by persistent or recurrent dyspeptic symptoms without identifiable organic, systemic or metabolic causes, is an increasingly recognized global health issue. The objective of this guideline is to equip clinicians and nursing professionals with evidence-based strategies for the management and treatment of adult patients with FD using traditional Chinese medicine (TCM). The Guideline Development Group consulted existing TCM consensus documents on FD and convened a panel of 35 clinicians to generate initial clinical queries. To address these queries, a systematic literature search was conducted across PubMed, EMBASE, the Cochrane Library, China National Knowledge Infrastructure (CNKI), VIP Database, China Biology Medicine (SinoMed) Database, Wanfang Database, Traditional Medicine Research Data Expanded (TMRDE), and the Traditional Chinese Medical Literature Analysis and Retrieval System (TCMLARS). The evidence from the literature was critically appraised using the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) approach. The strength of the recommendations was ascertained through a consensus-building process involving TCM and allopathic medicine experts, methodologists, pharmacologists, nursing specialists, and health economists, leveraging their collective expertise and empirical knowledge. The guideline comprises a total of 43 evidence-informed recommendations that span a range of clinical aspects, including the pathogenesis according to TCM, diagnostic approaches, therapeutic interventions, efficacy assessments, and prognostic considerations. Please cite this article as: Zhang SS, Zhao LQ, Hou XH, Bian ZX, Zheng JH, Tian HH, Yang GH, Hong WS, He YY, Liu L, Shen H, Li YP, Xie S, Shu J, Zeng BF, Li JX, Liu Z, Xiao ZH, Xiao JD, Zheng PY, Huang SG, Chen SL, Fei GJ. International clinical practice guideline on the use of traditional Chinese medicine for functional dyspepsia (2025). J Integr Med. 2025; 23(5):502-518.
Dyspepsia/drug therapy* ; Humans ; Medicine, Chinese Traditional/methods* ; Practice Guidelines as Topic ; Drugs, Chinese Herbal/therapeutic use*

This study was aimed at establishing a method of ultra-fast quantitative PCR for Brucella detection.We used an exogenous recombinant plasmid as the internal reference and targeted the T4SS secretion system,an important Brucella viru-lence factor,to design specific primers and probes.The sensitivity,specificity,and repeatability of this method were evaluated,and a standard curve was constructed.The coincidence rate of detection findings with this method versus quantitative PCR was determined.This method markedly decreased the detection time to only 10 minutes.The standard curve demonstrated a good linear relationship(Y=-3.410 7x+38.357,R2=0.998 5)with a low minimum detection limit of 10 copies/μL.The method exhibited good specificity and did not specifically amplify several common clinical bacteria other than Brucella.The de-tection of three concentrations of positive plasmids yielded coefficients of variation(CVs)of 0.20％to 0.91％,thus demonstra-ting the method's excellent repeatability.Furthermore,140 clinical samples were analyzed concurrently with the fluorescence PCR method,which yielded a 100％compliance rate and consistent results.Our findings indicated that the Brucella ultra-fast quantitative PCR was ultrafast;had high sensitivity,high specificity,and good specificity;and can be used for the clinical de-tection of Brucella and emergency investigation of epidemics.Therefore,this method is valuable for the early diagnosis of Bru-cella.

Objective:To analyze the learning curve of TiRobot-assisted lumbar pedicle screw fixation (LPSF) by cumulative sum (CUSUM) test method.Methods:The clinical data of 50 patients who underwent TiRobot-assisted LPSF from January 2020 to December 2022 in Beijing Friendship Hospital, Capital Medical University were retrospectively analyzed. CUSUM analysis and learning curve fitting were performed with robot usage time as the main indicator with the time for each step refined (robot registration time, path planning time and guide wire placement time), to select the best learning curve fitting model with the R2 value closest to 1. Using the turning point of the learning curve as the boundary, the learning curve was divided into two stages as learning stage and maturity stage, and then the observation indexes were compared between the two stages. Results:All 50 patients successfully completed the surgery without perioperative complications, with a total of 244 pedicle screws implanted. The total robot usage time and robot registration time showed a gradually decreasing trend with the increase of case number, and the learning curves were successfully fitted and reached their peaks at the seventeenth and thirteenth cases respectively. The entire learning process was divided into learning stage (17 cases) and maturity stage (33 cases) based on the turning point of the learning curve of total robot usage time. The path planning time and guide wire placement time did not show significant changes with the increase in the case number. The total robot usage time, robot registration time and the intraoperative blood loss in the learning stage were significantly higher than those in the maturity stage: (35.35 ± 1.58) min vs. (30.61 ± 0.43) min, (20.83 ± 1.56) min vs. (14.94 ± 0.29) min and 400 (150, 500) ml vs. 200 (110, 300) ml, the guide wire placement time of per screw was significantly lower than that in the maturity stage: 2.00 (1.83, 2.34) min/screw vs. 2.33 (2.13, 2.69) min/screw, and there were statistical differences ( P<0.05 or <0.01). There were no statistical difference in the path planning time, path planning time of per screw, guide wire placement time and the accuracy of screw placement between two stages ( P>0.05). Conclusions:TiRobot-assisted LPSF is a new technology with safety and effectiveness, and it has a relatively short learning curve. To achieve technological maturity, at least 17 surgeries are required with accumulated experience, and the robot registration is the main step of the learning process. After reaching maturity stage, the robot usage time is significantly shortened and intraoperative trauma is significantly reduced while the relatively high screw placement accuracy is ensured.

This study was aimed at establishing a method of ultra-fast quantitative PCR for Brucella detection.We used an exogenous recombinant plasmid as the internal reference and targeted the T4SS secretion system,an important Brucella viru-lence factor,to design specific primers and probes.The sensitivity,specificity,and repeatability of this method were evaluated,and a standard curve was constructed.The coincidence rate of detection findings with this method versus quantitative PCR was determined.This method markedly decreased the detection time to only 10 minutes.The standard curve demonstrated a good linear relationship(Y=-3.410 7x+38.357,R2=0.998 5)with a low minimum detection limit of 10 copies/μL.The method exhibited good specificity and did not specifically amplify several common clinical bacteria other than Brucella.The de-tection of three concentrations of positive plasmids yielded coefficients of variation(CVs)of 0.20％to 0.91％,thus demonstra-ting the method's excellent repeatability.Furthermore,140 clinical samples were analyzed concurrently with the fluorescence PCR method,which yielded a 100％compliance rate and consistent results.Our findings indicated that the Brucella ultra-fast quantitative PCR was ultrafast;had high sensitivity,high specificity,and good specificity;and can be used for the clinical de-tection of Brucella and emergency investigation of epidemics.Therefore,this method is valuable for the early diagnosis of Bru-cella.

Lipopolysaccharides (LPS) are major outer membrane components of Gram-negative bacteria. Unlike most Gram-negative bacteria, Acinetobacter baumannii can still survive and acquire polymyxin resistance after complete loss of LPS. Previous studies of LPS-deficient Acinetobacter baumannii mostly focused on LPS-deficient strains induced by polymyxin, whose background was complex and unstable. To investigate LPS loss-mediated polymyxin resistant-Acinetobacter baumannii, this study constructed a stable and clear background LPS-deficient strain by knocking out lpxC gene in Acinetobacter baumannii ATCC 19606 with CIRSPR/Cas9, and then studied the phenotypic changes of the lpxC-deficient strain including morphology, growth rate, antibiotic susceptibility, virulence, membrane permeability, and membrane potential. Animal experiments were approved by the Animal Care and Welfare Committee Institute of Medicinal Biotechnology, CAMS and PUMC (approval number: IMB-20240119D₉). The results indicated that the lpxC gene of Acinetobacter baumannii ATCC 19606 was successfully knocked out. After losing the lpxC, the strain underwent the morphological change from rod-shaped to spherical. Furthermore, it leads to reduced growth rate, enhanced membrane permeability, decreased membrane potential, lower virulence, and increased antibiotic susceptibility to β-lactams, quinolones, aminoglycosides, macrolides, glycopeptides. The lpxC deletion results in significant changes in membrane homeostasis and adaptability of Acinetobacter baumannii. Understanding the phenotypic changes of colistin-resistant Acinetobacter baumannii mediated by LPS loss is useful for exploring the resistance mechanism of Acinetobacter baumannii and developing new therapeutic strategies.

Outer membrane vesicles (OMVs) are nanoscale vesicles secreted by Gram-negative bacteria. As a unique bacterial secretion, OMV secretion can help bacteria maintain the outer membrane stability or remove harmful substances. Studies have shown that local separation of outer membrane and peptidoglycan layers led by abnormalities in outer membrane protein function, abnormal structure or excessive accumulation of LPS, and erroneous accumulation of phospholipids in the outer leaflet, which can all lead to bacterial outer membrane protrusion and eventually bud formation of OMVs. Since OMVs are mainly composed of bacterial outer membrane and periplasmic components, the pathogen associated molecular patterns (PAMPs) on their surface can trigger strong immune responses. For example, OMVs can recruit and activate neutrophils, polarize macrophages to secrete large amounts of inflammatory factors. More importantly, OMVs can act as adjuvants to induce dendritic cell (DC) maturation to enhance adaptive immune response in the body. At the same time, OMVs are derived from bacteria, which make it easy to modify. The methods by genetic engineering and others can improve their tumor targeting, give them new functions, or reduce their immunotoxicity, which is conducive to their application in tumor therapy. OMVs not only induce apoptosis or pyroptosis of tumor cells, but also regulate the host immune system, which makes OMVs themselves have a certain killing effect on tumors. In addition, the tendency of neutrophils to inflammatory tumor sites and the formation of neutrophil extracellular traps enable OMVs to target tumor sites, and the suitable size and the characteristic that they are easily taken up by DCs give OMVs a certain lymphatic targeting ability. Therefore, OMVs are often employed as excellent drug or vaccine carriers in tumor therapy. This review mainly discusses the biological mechanism of OMVs, the regulatory effects of OMVs on immune cells, the functional modification strategies of OMVs, and their research progress in tumor therapy.