Objective To investigate the species of sandflies and the prevalence of Leishmania infections in sandflies from selected areas of northern and northwestern China, so as to provide insights into identification of leishmaniasis vectors and assessment of epidemiological trends of leishmaniasis in China. Methods Sandfly samples were collected from Mentougou District of Beijing Municipality, Xiangning County in Linfen City of Shanxi Province, Ejin Banner in Alxa League of Inner Mongolia Autonomous Region, and Payzawat County of Karamay District of Karamay City, Gaochang District of Turpan City in Xinjiang Uygur Autonomous Region from July 2023 to July 2024. Approximately 100 intact female sandfly samples were randomly selected from each site and the species of sandflies was identified according to morphological characteristics and molecular assays. Female sandflies originating from the same habitat were grouped into pools of 10 individuals. Leishmania infection was detected using polymerase chain reaction (PCR) assay targeting the internal transcribed spacer 1 (ITS-1) gene, and the prevalence of Leishmania infection was calculated in sandflies from different sampling sites using the minimum infection rate (MIR) method. In addition, positive amplicons were sequenced and subjected to phylogenetic analysis. Results A total of 6 155 sandflies were collected from different environments at sampling sites across the six aforementioned regions from July 2023 to July 2024. Phlebotomus chinensis (96.00%) was the dominant sandfly species in Mentougou District, Beijing Municipality, with a small proportion of Ph. sergenti (4.00%), and only Ph. chinensis was found in Xiangning County, Linfen City, Shanxi Province. Ph. wui was the only sandfly species detected in Ejin Banner, Alxa League, Inner Mongolia Autonomous Region, and Payzawat County, Kashgar City, Xinjiang Uygur Autonomous Region, and Ph. caucasicus (97.70%) was the dominant sandfly species in Karamay District, Karamay City, Xinjiang Uygur Autonomous Region, with a small proportion of Ph. wui (2.30%), while Ph. alexandri was the only species in Gaochang District, Turpan City, Xinjiang Uygur Autonomous Region. A total of 40, 60, 34, 18, 18, and 22 pools of sandfly samples were tested from Mentougou District in Beijing Municipality, Xiangning County in Linfen City of Shanxi Province, Ejin Banner in Alxa League of Inner Mongolia Autonomous Region, Payzawat County in Kashgar City, Karamay District in Karamay City, and Gaochang District in Turpan City of Xinjiang Uygur Autonomous Region, respectively. L. infantum was detected in Ph. chinensis samples from Mentougou District in Beijing Municipality, and Xiangning County of Linfen City in Shanxi Province, with MIR of 0.25% to 1.00%, and L. donovani was detected in Ph. wui from Ejin Banner in Alxa League of Inner Mongolia Autonomous Region, and Payzawat County in Kashgar City of Xinjiang Uygur Autonomous Region, with MIR of 0.56% to 0.88%; however, no Leishmania infection was detected in Ph. caucasicus from Karamay District in Karamay City or Ph. alexandri from Gaochang District in Turpan City of Xinjiang Uygur Autonomous Region. Phylogenetic analysis showed that the Leishmania ITS-1 gene sequences obtained from Mentougou District in Beijing Municipality and Xiangning County in Linfen City of Shanxi Province were clustered into the same clade with the reference sequences of L. infantum ITS-1 gene, while the Leishmania ITS-1 gene sequences obtained from Ejin Banner in Alxa League of Inner Mongolia Autonomous Region and Payzawat County in Kashgar City of Xinjiang Uygur Autonomous Region were clustered into the same clade with the reference sequences of L. donovani ITS-1 gene. Conclusions There are variations in sandfly species in selected areas of northern and northwestern China, and variations in the species of Leishmania infecting sandflies. Improved surveillance of sandfly vectors and targeted control strategies with adaptations to geographical features and leishmaniasis vectors are recommended.

Objective To explore the effectiveness of drawing-based method in medical courses and their impact on students' learning habits,academic performance,and comprehensive competencies,in order to meet the demand for high-quality,interdisciplinary,and innovative talent,and provide theoretical support for integrating aesthetic education into medical training.Methods A questionnaire survey was conducted among medical students(n=310)at Dalian Medical University,covering the frequency of using drawing method and their effects on learning outcomes,innovation ability,and humanistic qualities.Data were analyzed using the Chi-square test and Fisher's exact test(P＜0.05).Results Totally 93.6％of students approved of using drawing method for learning medical courses,with 70.8％having developed a habit of drawing-based learning.Students with stronger drawing skills were more inclined to use drawing method and supported their application in teaching.The frequency of drawing-based learning was positively correlated with anatomy scores(P＜0.05).Students generally agreed that drawing method enhanced knowledge comprehension,learning interest,long-term memory,innovation ability,critical thinking,and humanistic qualities.However,students with weaker drawing skills perceived drawing method as potentially increasing learning burdens and being less efficient,but this perception significantly decreased with increased drawing frequency(P＜0.05).Conclusion Drawing methods are widely used in medical courses and effectively improve learning outcomes and comprehensive competencies.Drawing proficiency and frequency are key factors influencing students' acceptance and learning effectiveness.Future efforts should focus on promoting drawing method,strengthening students' drawing skills,and optimizing learning processes to deepen the integration of aesthetic education in medical training.

Objective To improve and refine the relevant regulations and guiding principles of warnings on drug instructions and labels in China.Methods This paper sorted out the drug instructions of small molecule anti-tumor drugs listed by the U.S.Food and Drug Administration(FDA)from 2005 to 2022,included the drugs mentioned in the QT interval prolongation risk,analyzed the clinical research and QT research results,and sorted out the identification and warning rules of the instructions.Results A total of 35 drugs were included,4 drugs wrote the risk of QT interval prolongation in the black box warning,21 drugs were wrote in the warning and precautions position,6 drugs were wrote in the adverse reaction section,and 2 drugs were only described under clinical pharmacology section.According to the severity of the QT interval prolongation caused by the drug and whether there were serious clinical consequences,they were displayed in the warnings(black box warnings),precautions(warnings and precautions)and adverse reactions in the instructions.Conclusion The aim of this article is to provide a reference for the writing of QT risk warning information of the instructions of domestic drug production enterprises and regulatory departments.It is recommended to clarify the severity of drug safety and the location of the instructions in clinical research,and continue to carry out safety monitoring and update the instructions in time after listing.

Objective To investigate the dosimetric differences in preoperative short-course volumetric modulated arc therapy(VMAT)for rectal cancer using different fluence smoothing(FS)levels in the Monaco Treatment Planning System(Monaco TPS).Methods Twenty rectal cancer patients who received preoperative neoadjuvant short-course VMAT at some hospital from September 2021 to December 2022 were retrospectively selected.Four groups of radiotherapy plans were formulated using the Monaco TPS for each case,which were classified into an off group,a low group,a medium group and a high group based on the FS levels.Then the four groups were compared in terms of the dosimetric parameters,monitor unit and number of the segments in the planning target volume(PTV)and organ at risk(OAR).Statistical analysis was performed using SPSS 27.0 software.Results All the four groups had the doses to the target volume meeting clinical requirements,which had no significant differences in the doses to 5％(D5％)and 95％(D95％)to the target volume and the maximum dose(Dmax),minimum dose(Dmin),mean dose(Dmean)and conformity index(all P＞0.05).Statistical differences were found between the homogeneity indexes of the four groups(P＜0.05),with the medium group behaving the best.The number of the segments rose while the mornitor units decreased siginificantly with the increase of FS levels,with the differences being statistically significant(P＜0.05).There were no significant differences between the V25,V20,V15 and V10 of the small intestine,the V25 and V20 of the bladder and the V15 and V10 of the left and right femur(all P＞0.05).Conclusion In preoperative short-course VMAT for rectal cancer,clinical requirements can be met with different FS levels in the Monaco TPS,and medium-level FS results in optimal overall dose distribution in terms of treatment planning.[Chinese Medical Equipment Journal,2025,46(5):48-53]

Biochemistry,as a fundamental course for science and engineering majors related to biology and chemistry,holds a significant position in the curriculum.The course team at Dalian Minzu University is committed to teaching innovation,adopting the outcome-based education(OBE)concept for teaching de-sign and incorporating ideological and political elements,in order to achieve the dual goals of knowledge transmission and value guidance.The team has established a three-dimensional teaching goal of"knowl-edge,morality,and ability",covering"consolidating core knowledge,cultivating moral sentiment,and enhancing innovation ability".Through a multi-dimensional integrated teaching method of"three integra-tions and five combinations",multiple rounds of teaching practice have been carried out in the applied chemistry major using"classification and specificity of enzyme"as an example.The output of teaching re-sults and survey questionnaires show that students highly recognize the teaching design and its"process-based learning"evaluation method,fully reflecting the student-centered teaching idea.Research has shown that OBE design combined with ideological and political elements can effectively promote students' knowl-edge acquisition,moral growth,and innovation ability improvement in the course of Biochemistry.This teaching design not only helps students construct correct worldviews,outlooks on life,and values,but also significantly enhances their innovative thinking and practical abilities.This teaching design can not only ef-fectively improve the teaching quality of the course,but also provide new perspectives and ideas for the teaching design of Biochemistry,realizing the organic integration of professional knowledge imparting and i-deological and political education,and has certain innovation and practical significance.

Objective To design a new type of elastic gloves for burn scar rehabilitation to solve the problems of conventional elastic gloves in pressure distribution,elasticity maintenance and absorption of sweat stains.Methods The new elastic gloves was made of non-woven fabric by spandex material,which was composed of external and internal parts.The main body of the external part was used as the primary structure of the gloves,which was provided with a sealing strip,a storage bag,a drawstring,etc.The internal part consisted of a bonding sheet,an elastic band,a fiber sheet,an absorbent sponge,some breathable holes,etc.Results The new elastic gloves designed could be used for the pressure therapy for the scars on the opisthenar,palm side,finger web and purlicue with scar proliferation inhibitted effectively,and the breathable hole and absorbent sponge contributed to the absorption of the sweat of the patient.Conclusion The new type of elastic gloves gains advantages in elasticity,wearing comfort and effectiveness of the pressure therapy for purlicue and finger web,and can be used for the pressure therapy to inhibit proliferative scarring after burns.[Chinese Medical Equipment Journal,2025,46(8):118-120]

In-depth study of the components of polymyxins is the key to controlling the quality of this class of antibiotics. Similarities and variations of components present significant analytical challenges. A two-dimensional (2D) liquid chromatography-mass spectrometr (LC-MS) method was established for screening and comprehensive profiling of compositions of the antibiotic colistimethate sodium (CMS). A high concentration of phosphate buffer mobile phase was used in the first-dimensional LC system to get the components well separated. For efficient and high-accuracy screening of CMS, a targeted method based on a self-constructed high resolution (HR) mass spectrum database of CMS components was established. The database was built based on the commercial MassHunter Personal Compound Database and Library (PCDL) software and its accuracy of the compound matching result was verified with six known components before being applied to genuine sample screening. On this basis, the unknown peaks in the CMS chromatograms were deduced and assigned. The molecular formula, group composition, and origins of a total of 99 compounds, of which the combined area percentage accounted for more than 95% of CMS components, were deduced by this 2D-LC-MS method combined with the MassHunter PCDL. This profiling method was highly efficient and could distinguish hundreds of components within 3 h, providing reliable results for quality control of this kind of complex drugs.

OBJECTIVE: Humans are exposed to complex mixtures of environmental chemicals and other factors that can affect their health. Analysis of these mixture exposures presents several key challenges for environmental epidemiology and risk assessment, including high dimensionality, correlated exposure, and subtle individual effects. METHODS: We proposed a novel statistical approach, the generalized functional linear model (GFLM), to analyze the health effects of exposure mixtures. GFLM treats the effect of mixture exposures as a smooth function by reordering exposures based on specific mechanisms and capturing internal correlations to provide a meaningful estimation and interpretation. The robustness and efficiency was evaluated under various scenarios through extensive simulation studies. RESULTS: We applied the GFLM to two datasets from the National Health and Nutrition Examination Survey (NHANES). In the first application, we examined the effects of 37 nutrients on BMI (2011-2016 cycles). The GFLM identified a significant mixture effect, with fiber and fat emerging as the nutrients with the greatest negative and positive effects on BMI, respectively. For the second application, we investigated the association between four pre- and perfluoroalkyl substances (PFAS) and gout risk (2007-2018 cycles). Unlike traditional methods, the GFLM indicated no significant association, demonstrating its robustness to multicollinearity. CONCLUSION GFLM framework is a powerful tool for mixture exposure analysis, offering improved handling of correlated exposures and interpretable results. It demonstrates robust performance across various scenarios and real-world applications, advancing our understanding of complex environmental exposures and their health impacts on environmental epidemiology and toxicology.
Humans ; Environmental Exposure/analysis* ; Linear Models ; Nutrition Surveys ; Environmental Pollutants ; Body Mass Index

Objective To analyze the influencing factors of death in the elderly with coronavirus disease 2019(COVID-19).Methods The case data of death caused by COVID-19 in West China Fourth Hospital from January 1 to July 8,2023 were collected,and surviving cases from the West China Elderly Health Cohort infected with COVID-19 during the same period were selected as the control.LASSO-Logistic regression was adopted to analyze the data after propensity score matching and the validity of the model was verified by drawing the receiver operating characteristic curve.Results A total of 3 239 COVID-19 survivors and 142 deaths with COVID-19 were included.The results of LASSO-Logistic regression showed that smoking(OR=3.33,95%CI=1.46-7.59,P=0.004),stroke(OR=3.55,95%CI=1.15-10.30,P=0.022),malignant tumors(OR=19.93, 95%CI=8.52-49.23, P<0.001),coronary heart disease(OR=7.68, 95%CI=3.52-17.07, P<0.001),fever(OR=0.51, 95%CI=0.26-0.96, P=0.042),difficulty breathing or asthma symptoms(OR=21.48, 95%CI=9.44-51.95, P<0.001),and vomiting(OR=8.19,95%CI=2.87-23.58, P<0.001)increased the risk of death with COVID-19.The prediction model constructed based on the influencing factors achieved an area under the curve of 0.889 in the test set.Conclusions Smoking,stroke,malignant tumors,coronary heart disease,fever,breathing difficulty or asthma symptoms,and vomiting were identified as key factors influencing the death risk in COVID-19.
Humans ; COVID-19/mortality* ; Aged ; Propensity Score ; China/epidemiology* ; Risk Factors ; Logistic Models ; Smoking ; SARS-CoV-2 ; Male ; Female ; Stroke ; Neoplasms