OBJECTIVE: To explore the displacement and pressure distribution of American Chiropractic in a model of third lumbar syndrome based on finite element analysis. METHODS: On March 2021, CT and MRI images of a 23-year-old male patient with right third lumbar syndrome were selected. A 3D stl model was established using Mimics and CATIA, and the data was imported into Hypermesh, Abaqus & ANSYS. The elastic modulus and Poisson's ratio of the affected side material were adjusted to establish its finite element model. Based on the comparison of the operating positions and routines of the American Chiropractic and the lumbar spine oblique pull method, but with differences in the focus and direction of force, the experimental group simulated the American Chiropractic with the healthy side (left side) lying position of the model. The upper endplate of L₃ and the lower part below L₃ twisted accordingly with the body position, we applied a vertical forward thrust of 246 N to the plane formed by the L₄, L₅ spinous processes and L₄ upper articular processes;The control group simulates the oblique pull method of the lumbar spine, requiring the model to lie on the healthy side (left side), fix the upper endplate of L₄, and perform a horizontal rotation along the longitudinal axis of L₃ vertebral body. At this time, the contact force in the upward direction is also set to 246 N. Compare the displacement and stress differences between the L₁-L₅ intervertebral bodies, intervertebral discs, articular processes, and transverse process muscles in two intervention models. RESULTS: ① Under safe load conditions, a test force of 246 N was applied to the model, and the maximum vertebral displacement occurred on the right side of the L₃ vertebral body (1.197 mm) after manual intervention in the control group. The vertebral displacement between L₁-L₅ induced by manual intervention in the experimental group was smaller than that of the control group's manual intervention (P<0.05). ② The maximum vertebral body stress occurred on the right side of the L₃ vertebral body after manual intervention in the control group (98.425 MPa). The stress on each vertebral body formed by the experimental group's manual intervention was lower than that of the control group's manual intervention (P<0.05). ③The maximum intervertebral disc stress occurred on the right side of the L_2,3 intervertebral disc (6.282 MPa) after manual intervention in the control group. ④ The maximum joint process stress occurred on the right side of the L₄ upper joint process after manual intervention in the experimental group (1.587 MPa). The joint process stress on the left side below L₁ and the left side above and below L₂ induced by manual intervention in the experimental group was lower than that of the control group (P<0.05). ⑤The maximum stress on the intertransverse process muscle was observed at the right lateral L₃ process end (31.960 MPa) of L_3,4 in the control group after manual intervention. The stress on the L_2,3 and L_4,5 segments of the intertransverse process muscle induced by manual intervention in the experimental group was lower than that of the control group's manual intervention (P<0.05). CONCLUSION The mechanical feedback of the L₁-L₅ vertebral body, the lower left side of the articular process L₁, the upper and lower left side of the articular process L₂, and the L_2,3 and L_4,5 segments of the transverse process muscle in the model indicates that performing American Chiropractic for the treatment of third lumbar transverse process syndrome can accurately hit the target pain point and allow the patient's tissue to form a low stress and low tension state after manual operation, thereby reducing the possibility of tissue damage caused by hypertonia after intervertebral joint movement, making it relatively safe. The application of American Chiropractic will be a new supplement to the traditional treatment plan for third lumbar transverse process syndrome.
Humans ; Finite Element Analysis ; Male ; Lumbar Vertebrae/physiopathology* ; Biomechanical Phenomena ; Young Adult ; Manipulation, Chiropractic ; Adult ; Tomography, X-Ray Computed ; Magnetic Resonance Imaging

OBJECTIVE: To evaluate the clinical efficacy and safety of Yangxue Qingnao Pills (YXQNP) combined with amlodipine in treating patients with grade 1 hypertension. METHODS: This is a multicenter, randomized, double-blind, and placebo-controlled study. Adult patients with grade 1 hypertension of blood deficiency and Gan (Liver)-yang hyperactivity syndrome were randomly divided into the treatment or the control groups at a 1:1 ratio. The treatment group received YXQNP and amlodipine besylate, while the control group received YXQNP's placebo and amlodipine besylate. The treatment duration lasted for 180 days. Outcomes assessed included changes in blood pressure, Chinese medicine (CM) syndrome scores, symptoms and target organ functions before and after treatment in both groups. Additionally, adverse events, such as nausea, vomiting, rash, itching, and diarrhea, were recorded in both groups. RESULTS: A total of 662 subjects were enrolled, of whom 608 (91.8%) completed the trial (306 in the treatment and 302 in the control groups). After 180 days of treatment, the standard deviations and coefficients of variation of systolic and diastolic blood pressure levels were lower in the treatment group compared with the control group. The improvement rates of dizziness, headache, insomnia, and waist soreness were significantly higher in the treatment group compared with the control group (P<0.05). After 30 days of treatment, the overall therapeutic effects on CM clinical syndromes were significantly increased in the treatment group as compared with the control group (P<0.05). After 180 days of treatment, brachial-ankle pulse wave velocity, ankle brachial index and albumin-to-creatinine ratio were improved in both groups, with no statistically significant differences (P>0.05). No serious treatment-related adverse events occurred during the study period. CONCLUSIONS Combination therapy of YXQNP with amlodipine significantly improved symptoms such as dizziness and headache, reduced blood pressure variability, and showed a trend toward lowering urinary microalbumin in hypertensive patients. These findings suggest that this regimen has good clinical efficacy and safety. (Registration No. ChiCTR1900022470).
Humans ; Amlodipine/adverse effects* ; Drugs, Chinese Herbal/adverse effects* ; Male ; Female ; Hypertension/complications* ; Middle Aged ; Treatment Outcome ; Drug Therapy, Combination ; Adult ; Blood Pressure/drug effects* ; Double-Blind Method ; Aged ; Antihypertensive Agents/adverse effects*

The scaphoid bone is one of the important bone of hand,which is frequently injured and difficult to treat in clinical practice.Therefore,it is very important to deeply study the microstructure and biomechanical characteristics of the scaphoid bone for understanding its injury mechanism and optimizing treatment scheme.Microcomputed tomography(micro-CT)provides high-resolution imaging of bone tissue,while finite element analysis can help to simulate the stress distribution and behavioral patterns of the scaphoid bone under various physiological and pathological states.The high-resolution three-dimensional image of the scaphoid bone obtained by micro-CT technology can be used to construct finite element models of real anatomical structure of the scaphoid bone,thus achieving accurate simulation of the mechanical properties of the scaphoid bone.The fusion of these two advanced technologies provides a new perspective for revealing the structural and functional relationships and injury mechanism of the scaphoid bone.Therefore,this paper reviews the anatomical characteristics of the scaphoid bone and its biomechanical behavior in different states,emphasizing the specific applications and advantages of micro-CT and finite element analysis techniques in the study of the scaphoid bone.By summarizing the research findings in recent years,this paper provides novel scientific basis and methods for the diagnosis,treatment,and prevention of scaphoid bone-related disorders.

The scaphoid bone is one of the important bone of hand,which is frequently injured and difficult to treat in clinical practice.Therefore,it is very important to deeply study the microstructure and biomechanical characteristics of the scaphoid bone for understanding its injury mechanism and optimizing treatment scheme.Microcomputed tomography(micro-CT)provides high-resolution imaging of bone tissue,while finite element analysis can help to simulate the stress distribution and behavioral patterns of the scaphoid bone under various physiological and pathological states.The high-resolution three-dimensional image of the scaphoid bone obtained by micro-CT technology can be used to construct finite element models of real anatomical structure of the scaphoid bone,thus achieving accurate simulation of the mechanical properties of the scaphoid bone.The fusion of these two advanced technologies provides a new perspective for revealing the structural and functional relationships and injury mechanism of the scaphoid bone.Therefore,this paper reviews the anatomical characteristics of the scaphoid bone and its biomechanical behavior in different states,emphasizing the specific applications and advantages of micro-CT and finite element analysis techniques in the study of the scaphoid bone.By summarizing the research findings in recent years,this paper provides novel scientific basis and methods for the diagnosis,treatment,and prevention of scaphoid bone-related disorders.

Traumatic supraorbital fissure syndrome (TSOFS) is a symptom complex caused by nerve entrapment in the supraorbital fissure after skull base trauma. If the compressed cranial nerve in the supraorbital fissure is not decompressed surgically, ptosis, diplopia and eye movement disorder may exist for a long time and seriously affect the patients′ quality of life. Since its overall incidence is not high, it is not familiarized with the majority of neurosurgeons and some TSOFS may be complicated with skull base vascular injury. If the supraorbital fissure surgery is performed without treatment of vascular injury, it may cause massive hemorrhage, and disability and even life-threatening in severe cases. At present, there is no consensus or guideline on the diagnosis and treatment of TSOFS that can be referred to both domestically and internationally. To improve the understanding of TSOFS among clinical physicians and establish standardized diagnosis and treatment plans, the Skull Base Trauma Group of the Neurorepair Professional Committee of the Chinese Medical Doctor Association, Neurotrauma Group of the Neurosurgery Branch of the Chinese Medical Association, Neurotrauma Group of the Traumatology Branch of the Chinese Medical Association, and Editorial Committee of Chinese Journal of Trauma organized relevant experts to formulate Chinese expert consensus on the diagnosis and treatment of traumatic supraorbital fissure syndrome ( version 2024) based on evidence of evidence-based medicine and clinical experience of diagnosis and treatment. This consensus puts forward 12 recommendations on the diagnosis, classification, treatment, efficacy evaluation and follow-up of TSOFS, aiming to provide references for neurosurgeons from hospitals of all levels to standardize the diagnosis and treatment of TSOFS.

Ankylosing spondylitis (AS) combined with lower cervical fracture is often categorized into unstable fracture, with a high incidence of neurological injury and a high rate of disability and morbidity. As factors such as shoulder occlusion may affect the accuracy of X-ray imaging diagnosis, it is often easily misdiagnosed at the primary diagnosis. Non-operative treatment has complications such as bone nonunion and the possibility of secondary neurological damage, while the timing, access and choice of surgical treatment are still controversial. Currently, there are no clinical practice guidelines for the treatment of AS combined with lower cervical fracture with or without dislocation. To this end, the Spinal Trauma Group of Orthopedics Branch of Chinese Medical Doctor Association organized experts to formulate Clinical guidelines for the treatment of ankylosing spondylitis combined with lower cervical fracture in adults ( version 2024) in accordance with the principles of evidence-based medicine, scientificity and practicality, in which 11 recommendations were put forward in terms of the diagnosis, imaging evaluation, typing and treatment, etc, to provide guidance for the diagnosis and treatment of AS combined with lower cervical fracture.

To construct a high-quality Panax ginseng cDNA library, transcription factors binding to the P. ginseng PgD14 gene promoter were screened by yeast one-hybrid, and proteins interacting with the P. ginseng Pgpht2-1 gene-encoded protein were screened by yeast two-hybrid. In this study, root tissues of P. ginseng were used as materials. Gateway technology was used to construct the P. ginseng yeast one-hybrid library, and duplex-specific nuclease(DSN) homogenization technology was used to construct the P. ginseng yeast two-hybrid library. The pAbAi-PgD14-Pro961 vector was used as bait to screen candidate transcription factors that might bind to the PgD14 gene promoter from the yeast one-hybrid library, and the pGBKT7-Pgpht2-1 vector was used as bait to screen candidate proteins that might interact with the Pgpht2-1 gene-encoded protein from the yeast two-hybrid library. The yeast one-hybrid library had a size of 1.20×10~7 CFU, a recombination rate of 100%, and an average inserted fragment length of more than 1 000 bp. The yeast two-hybrid library had a size of 1.832×10~5 CFU, a recombination rate of 100%, and an average inserted fragment length of about 1 000 bp. The recombinant vectors pAbAi-PgD14-Pro961 and pGBKT7-Pgpht2-1 were transformed into Y1HGold and AH109 strains, respectively, and interacting proteins were screened by yeast one-hybrid and yeast two-hybrid. As a result, 54 transcription factors that could bind to the PgD14 gene promoter of P. ginseng and 42 proteins that may interact with the protein encoded by the Pgpht2-1 gene were identified. This study successfully constructed the P. ginseng yeast one-hybrid and yeast two-hybrid cDNA libraries, laying a foundation for subsequent studies on the functions of the P. ginseng PgD14, Pgpht2-1, and other genes.
Panax/metabolism* ; Two-Hybrid System Techniques ; Plant Proteins/metabolism* ; Gene Library ; Plant Roots/chemistry* ; Protein Binding ; Transcription Factors/metabolism* ; Promoter Regions, Genetic

The long-acting cabotegravir and rilpivirine injection regimen（CAB+RPV regimen）is the first approved long-acting antiretroviral therapy（ART）for HIV in China，administered once every two months. This regimen provides an innovative alternative to daily oral ART，benefiting virologically suppressed patients. Several large clinical-studies have shown that the CAB+RPV regimen achieves comparable virologic suppression and safety to daily oral regimens，while significantly enhancing patient satisfaction. Based on international and domestic HIV/AIDs guidelines and clinical evidence，this consensus offers expert recommendations on patient selection，clinical management，and key communication strategies for healthcare providers to support the effective use of this regimen，aiming to improve quality of life for people living with HIV and accumulate domestic clinical experience with this advanced treatment approach.

The long-acting cabotegravir and rilpivirine injection regimen（CAB+RPV regimen）is the first approved long-acting antiretroviral therapy（ART）for HIV in China，administered once every two months. This regimen provides an innovative alternative to daily oral ART，benefiting virologically suppressed patients. Several large clinical-studies have shown that the CAB+RPV regimen achieves comparable virologic suppression and safety to daily oral regimens，while significantly enhancing patient satisfaction. Based on international and domestic HIV/AIDs guidelines and clinical evidence，this consensus offers expert recommendations on patient selection，clinical management，and key communication strategies for healthcare providers to support the effective use of this regimen，aiming to improve quality of life for people living with HIV and accumulate domestic clinical experience with this advanced treatment approach.

OBJECTIVE: To systematically review the clinical efficacy of total ankle arthroplasty (TAA) and ankle arthrodesis (AA) in the treatment of end-stage ankle arthritis. METHODS: The PubMed, EMBASE and Cochrane Library databases were searched for articles published in the treatment of end-stage ankle arthritis with AA or TAA from the establishment of the database to June 2021. Bias risk tool was used to evaluate the quality of the literature. The American Orthopaedic Foot and Ankle Society Ankle-Hindfoot Scale(AOFAS), visual analog scale (VAS), ankle osteoarthritis scale(AOS), gait analysis (pace, frequency, stride), range of motion (ROM), satisfaction, complications and reoperation rate were analyzed by meta-analysis between AA and TAA groups by RevMan 5.3 software. RESULTS: A total of 12 articles were included, including 1 050 patients in the AA group and 3 760 patients in the TAA group, totaling 4 810 patients. Meta-analysis showed that the total score of AOFAS[MD=-3.12, 95%CI(-9.02, 2.96), P=0.31], pain score [MD=1.60, 95%CI(-1.35, 4.54), P=0.29], alignmentl score[MD=-0.04, 95%CI(-0.52, 0.44), P=0.88], VAS[MD=0.10, 95%CI(-0.49, 0.68), P=0.74], and AOS total score [MD=-4.01, 95%CI(-8.28, 0.25), P=0.06], the difference was not statistically significant (P>0.05). The score of AOFAS functional in TAA group was significantly higher than that in TAA group[MD=44.22, 95%CI(-8.01, -0.43), P=0.03]. There was no significant difference in gait analysis between the two groups (P>0.05). Postoperative ROM [MD=-4.93, 95%CI(-6.35, -3.52), P<0.000 01] and change in ROM from preoperative to follow-up[MD=-5.74, 95%CI(-8.88, -2.61), P=0.0003] between two groups, the difference was statistically significant. There was no significant difference in satisfaction between the two groups [OR=1.011, 95%CI(0.46, 2.23), P=0.98]. Complications [OR=1.61, 95%CI(1.26, 2.06), P=0.0002] and non-revision reoperation [OR=1.61, 95%CI(1.17, 2.21), P=0.003] were significantly lower in the TAA group than in the AA group. There was no significant difference in the rate of revision and reoperation(P>0.05) between the two groups [OR=1.02, 95%CI(0.37, 2.78), P=0.97]. CONCLUSION The clinical efficacy of AA is similar to that of TAA, but the non revision reoperation rate and main surgical complications of TAA are significantly reduced. Therefore, further high-quality methodological research and long-term follow-up are needed to confirm this conclusion.
Humans ; Ankle/surgery* ; Ankle Joint/surgery* ; Arthroplasty, Replacement, Ankle ; Treatment Outcome ; Osteoarthritis/surgery* ; Arthrodesis ; Retrospective Studies