Objective: To explore the efficacy of focal radiofrequency ablation (RFA) in the treatment of low-to-intermediate risk localized prostate cancer and its impact on postoperative urinary control and sexual function recovery，in order to explore the feasibility of minimally invasive methods for the treatment of localized prostate cancer. Methods: Clinical data of 28 patients with low-to-intermediate risk localized prostate cancer who underwent RFA in Nanjing Drum Tower Hospital，Affiliated Hospital of Medical School during Jun.2017 and Feb.2021 were retrospectively analyzed.The 5-year failure-free survival (FFS) rate，surgery related complications，postoperative urinary control and sexual function were collected.The differences between the survival curves of patients in the low-risk and intermediate-risk subgroups were assessed with log-rank test and Breslow test. Results: All surgeries were successfully completed under local anesthesia.During the median follow-up of 43 (40-49) months，the 5-year FFS rate predicted by Kaplan-Meier method was 78.57%; 25 patients (89.29%) did not experience surgery-related complications; 27 patients (96.43%) were able to control urination; 1 patient developed new-onset sexual dysfunction.There was no significant difference in the survival curves between patients in the low-risk and intermediate-risk groups (P>0.05). Conclusion: RFA for patients with low-to-intermediate risk localized prostate cancer has good clinical efficacy，little impact on urinary control and sexual function recovery，and few postoperative complications，which can be used as one of the treatment options for these patients.

Objective To evaluate the efficacy and safety of brexpiprazole in treating acute schizophrenia.Methods Patients with schizophrenia were randomly divided into treatment group and control group.The treatment group was given brexpiprozole 2-4 mg·d-1 orally and the control group was given aripiprazole 10-20 mg·d-1orally,both were treated for 6 weeks.Clinical efficacy of the two groups,the response rate at endpoint,the changes from baseline to endpoint of Positive and Negative Syndrome Scale(PANSS),Clinical Global Impression-Improvement(CGI-S),Personal and Social Performance scale(PSP),PANSS Positive syndrome subscale,PANSS negative syndrome subscale were compared.The incidence of treatment-related adverse events in two groups were compared.Results There were 184 patients in treatment group and 186 patients in control group.After treatment,the response rates of treatment group and control group were 79.50％(140 cases/184 cases)and 82.40％(150 cases/186 cases),the scores of CGI-I of treatment group and control group were(2.00±1.20)and(1.90±1.01),with no significant difference(all P＞0.05).From baseline to Week 6,the mean change of PANSS total score wese(-30.70±16.96)points in treatment group and(-32.20±17.00)points in control group,with no significant difference(P＞0.05).The changes of CGI-S scores in treatment group and control group were(-2.00±1.27)and(-1.90±1.22)points,PSP scores were(18.80±14.77)and(19.20±14.55)points,PANSS positive syndrome scores were(-10.30±5.93)and(-10.80±5.81)points,PANSS negative syndrome scores were(-6.80±5.98)and(-7.30±5.15)points,with no significant difference(P＞0.05).There was no significant difference in the incidence of treatment-related adverse events between the two group(69.00％vs.64.50％,P＞0.05).Conclusion The non-inferiority of Brexpiprazole to aripiprazole was established,with comparable efficacy and acceptability.

Oral diseases concern almost every individual and are a serious health risk to the popula-tion.The restorative treatment of tooth and jaw defects is an important means to achieve oral function and support the appearance of the contour.Based on the principle of"learning from the nature",Deng Xu-liang's group of Peking University School and Hospital of Stomatology has proposed a new concept of"microstructural biomimetic design and tissue adaptation of tooth/jaw materials"to address the worldwide problems of difficulty in treating dentine hypersensitivity,poor prognosis of restoration of tooth defects,and vertical bone augmentation of alveolar bone after tooth loss.The group has broken through the bottle-neck of multi-stage biomimetic technology from the design of microscopic features to the enhancement of macroscopic effects,and invented key technologies such as crystalline/amorphous multi-level assembly,ion-transportation blocking,and multi-physical properties of the micro-environment reconstruction,etc.The group also pioneered the cationic-hydrogel desensitizer,digital stump and core integrated restora-tions,and developed new crown and bridge restorative materials,gradient functionalisation guided tissue regeneration membrane,and electrically responsive alveolar bone augmentation restorative membranes,etc.These products have established new clinical strategies for tooth/jaw defect repair and achieved inno-vative results.In conclusion,the research results of our group have strongly supported the theoretical im-provement of stomatology,developed the technical system of oral hard tissue restoration,innovated the clinical treatment strategy,and led the progress of the stomatology industry.

Objective To explore the eradication rate of human papillomavirus(HPV)and gestational outcome of patients with high-grade squamous intraepithelial disease of the cervix(HSIL)after loop electrosurgical excision procedure(LEEP)by transvaginal dissection of the vesicorectal form the cervix.Methods A total of 53 patients treated with LEEP by transvaginal dissection of the vesicorectal form the cervix in Obstetrics and Gynecology Hospital,Fudan University from Jan to Dec,2019 were investigated.Clinical information of cervical cytological examination,HPV test and cervical biopsy under colposcopy were followed up for 6,12 and 24 months post-LEEP were collected.HPV infection in these 53 patients were compared before and after LEEP surgery.The rate of successful fertility of the cohort,the HPV conversion rate of patients with hysterectomy and LEEP done were compared.The association between the pathological type and positive surgical margin and the association between HPV infection type and positive surgical margin were analyzed.Results HPV infection rate of was 94.3%(50/53)and the proportion of HPV16 and/or 18 infection was 75.5%(40/53).Mono-HPV infection rate(69.8%,37/53)was significantly higher than mixed HPV infection rate(22.7%,13/53).Thirty-eight patients(71.7%)were found with positive surgical margin in previous LEEP operation.Fifteen patients had recurrence(28.3%)and 40 patients(75.5%)successfully delivered baby after surgery.Postoperative pathology was mainly HSIL,accounting for 66%(30/53),and 28.3%patients(15/53)had no pathological change.Forty cases had satisfying fertility-conservative operation outcome with negative surgical margin,and 38 patients eradicated HPV infection after LEEP,which took up 95%of patients with satisfying fertility-conservative operation.There was no significant difference of positive resection margin rate in between groups of HPV16/18 infection and other types.Five cases had successful delivery(12.5%,5/40)with 1 case of vaginal delivery and 4 cases of cesarean section.Among these 5 cases,3 cases undertook preventive cervical cerclage,with 1 case of vaginal delivery and 2 cases of cesarean sections.Conclusion HPV eradication rate and surgical outcome could be significantly improved by LEEP with transvaginal dissection of the vesicorectal from the cervix,which satisfied the fertility preservation of females at reproductive age.

ObjectiveTo construct a quantitative prediction model of three indicators（moisture absorption rate， film thickness and coating weight gain） during the coating process of Vitamin C Yinqiao tablets（VCYT） by near-infrared spectroscopy（NIRS）， and to realize the endpoint judgment. MethodReal-time NIRS data of 4 batches of VCYT during the coating process were collected by diffuse reflection method. The coating method employed was the rolling coating method， and the samples were obtained at the spray stage from the coater's sampling port every 10 minutes， and 57 batches of samples（about 1 800 tablets） were collected at various coating times， the tablets were embedded in molten paraffin， cut longitudinally， and observed by stereomicroscope. The film thickness， with a target value of 38 μm， was then measured using Motic Images Advanced 3.2 software. Furthermore， the mositure absorption rate of samples， aiming for a target value of 3%， was determined in accordance with guiding principles for drug hygroscopicity testing in the 2020 edition of Chinese Pharmacopoeia， and 3 samples were randomly selected from each batch（10 tablets per batch）， and the coating weight gain was calculated（target value of 4%）. Partial least squares regression（PLSR） was used to construct a quantitative model of the 3 coating indicators， and the predicted values of the coating indicators were smoothed using the moving average method and used to determine the coating endpoints. ResultThe prediction determination coefficients（R_p²） for moisture absorption rate， film thickness and coating weight gain were 0.933 4， 0.932 6 and 0.965 9， the root mean square errors of prediction（RMSEP） were 0.163 5%， 1.870 9 μm and 0.240 3%， the relative percent deviations（RPD） were 3.711 0， 2.760 7 and 5.415 8， respectively. The results of the external validation set demonstrated that the real-time predicted values obtained by the models exhibited the same trend as the measured values， and the coating endpoint could be accurately predicted（with a prediction error of less than 7.32 min and a relative error of less than 5.63%）. ConclusionThe established NIRS model exhibits excellent predictive performance and can be used for quality control of VCYT during the coating process.

Objective To investigate the clinical effect of unilateral percutaneous vertebroplasty(PVP)combined with 3D printing technology for the treatment of thoracolumbar osteoporotic compression fracture.Methods A total of 77 patients with thoracolumbar osteoporotic compression fractures from October 2020 to April 2022 were included in the study,all of which were vertebral body compression fractures caused by trauma.According to different treatment methods,they were di-vided into experimental group and control group.Thirty-two patients used 3D printing technology to improve unilateral transpedicle puncture vertebroplasty in the experimental group,there were 5 males and 27 females,aged from 63 to 91 years old with an average of(77.59±8.75)years old.Forty-five patients were treated with traditional bilateral pedicle puncture vertebroplasty,including 7 males and 38 females,aged from 60 to 88 years old with an average of(74.89±7.37)years old.Operation time,intraoperative C-arm X-ray times,anesthetic dosage,bone cement injection amount,bone cement diffusion good and good rate,complications,vertebral height,kyphotic angle(Cobb angle),visual analogue scale(VAS),Oswestry disability index(ODI)and other indicators were recorded before and after surgery,and statistically analyzed.Results All patients were followed up for 6 to 23 months,with preoperative imaging studies,confirmed for thoracolumbar osteoporosis com-pression fractures,two groups of patients with postoperative complications,no special two groups of patients'age,gender,body mass index(BMI),time were injured,the injured vertebral distribution had no statistical difference(P＞0.05),comparable data.Two groups of patients with bone cement injection,bone cement dispersion rate,preoperative and postoperative vertebral body height,protruding after spine angle(Cobb angle),VAS,ODI had no statistical difference(P＞0.05).The operative time,intra-operative fluoroscopy times and anesthetic dosage were statistically different between the two groups(P＜0.05).Compared with the traditional bilateral puncture group,the modified unilateral puncture group combined with 3D printing technology had shorter operation time,fewer intraoperative fluoroscopy times and less anesthetic dosage.The height of anterior vertebral edge,kyphosis angle(Cobb angle),VAS score and ODI of the affected vertebrae were statistically different between two groups at each time point after surgery(P＜0.05).Conclusion In the treatment of thoracolumbar osteoporotic compression fractures,3D printing technology is used to improve unilateral puncture PVP,which is convenient and simple,less trauma,short operation time,fewer fluoroscopy times,satisfactory distribution of bone cement,vertebral height recovery and kyphotic Angle correction,and good functional improvement.

Temporomandibular joint (TMJ) diseases are common clinical conditions. The number of patients with TMJ diseases is large, and the etiology, epidemiology, disease spectrum, and treatment of the disease remain controversial and unknown. To understand and master the current situation of the occurrence, development and prevention of TMJ diseases, as well as to identify the patterns in etiology, incidence, drug sensitivity, and prognosis is crucial for alleviating patients′suffering.This will facilitate in-depth medical research, effective disease prevention measures, and the formulation of corresponding health policies. Cohort construction and research has an irreplaceable role in precise disease prevention and significant improvement in diagnosis and treatment levels. Large-scale cohort studies are needed to explore the relationship between potential risk factors and outcomes of TMJ diseases, and to observe disease prognoses through long-term follw-ups. The consensus aims to establish a standard conceptual frame work for a cohort study on patients with TMJ disease while providing ideas for cohort data standards to this condition. TMJ disease cohort data consists of both common data standards applicable to all specific disease cohorts as well as disease-specific data standards. Common data were available for each specific disease cohort. By integrating different cohort research resources, standard problems or study variables can be unified. Long-term follow-up can be performed using consistent definitions and criteria across different projects for better core data collection. It is hoped that this consensus will be facilitate the development cohort studies of TMJ diseases.

Cells are the fundamental structural and functional units of biological organisms,with inherent differences in composition and interactions with exogenous substances,known as cellular heterogeneity.Single cell inductively coupled plasma-mass spectrometry(SC-ICP-MS)allows for the high-throughput introduction of individual cells,enabling the highly sensitive detection and quantification of elements within a single cell,thus effectively providing information on cellular heterogeneity.This review outlined the SC-ICP-MS sample preparation process for different types of cells(single-cell systems,aggregation-prone and adherent cell systems,animal tissues,and plant tissues),including steps such as separation,washing,and fixation,as well as the advantages and existing issues of the current sample introduction systems and quantification methods.The recent applications of SC-ICP-MS in detecting endogenous substances(endogenous elements and proteins),exogenous substances(heavy metals,metal-based drugs and nanoparticles),and the simultaneous detection of both endogenous and exogenous substances were summarized.Finally,the perspectives on the future development of SC-ICP-MS in analytical methods and application fields were presented,including the optimization of single-cell sample preparation,transport efficiency,evaluation standards of ionization efficiency,and the establishment of multiparametric cell analysis platforms.

Objective To monitor the susceptibility of clinical isolates to antimicrobial agents in tertiary hospitals in major regions of China in 2022.Methods Clinical isolates from 58 hospitals in China were tested for antimicrobial susceptibility using a unified protocol based on disc diffusion method or automated testing systems.Results were interpreted using the 2022 Clinical &Laboratory Standards Institute(CLSI)breakpoints.Results A total of 318 013 clinical isolates were collected from January 1,2022 to December 31,2022,of which 29.5％were gram-positive and 70.5％were gram-negative.The prevalence of methicillin-resistant strains in Staphylococcus aureus,Staphylococcus epidermidis and other coagulase-negative Staphylococcus species(excluding Staphylococcus pseudintermedius and Staphylococcus schleiferi)was 28.3％,76.7％and 77.9％,respectively.Overall,94.0％of MRSA strains were susceptible to trimethoprim-sulfamethoxazole and 90.8％of MRSE strains were susceptible to rifampicin.No vancomycin-resistant strains were found.Enterococcus faecalis showed significantly lower resistance rates to most antimicrobial agents tested than Enterococcus faecium.A few vancomycin-resistant strains were identified in both E.faecalis and E.faecium.The prevalence of penicillin-susceptible Streptococcus pneumoniae was 94.2％in the isolates from children and 95.7％in the isolates from adults.The resistance rate to carbapenems was lower than 13.1％in most Enterobacterales species except for Klebsiella,21.7％-23.1％of which were resistant to carbapenems.Most Enterobacterales isolates were highly susceptible to tigecycline,colistin and polymyxin B,with resistance rates ranging from 0.1％to 13.3％.The prevalence of meropenem-resistant strains decreased from 23.5％in 2019 to 18.0％in 2022 in Pseudomonas aeruginosa,and decreased from 79.0％in 2019 to 72.5％in 2022 in Acinetobacter baumannii.Conclusions The resistance of clinical isolates to the commonly used antimicrobial agents is still increasing in tertiary hospitals.However,the prevalence of important carbapenem-resistant organisms such as carbapenem-resistant K.pneumoniae,P.aeruginosa,and A.baumannii showed a downward trend in recent years.This finding suggests that the strategy of combining antimicrobial resistance surveillance with multidisciplinary concerted action works well in curbing the spread of resistant bacteria.

Objective To investigate the distribution and antimicrobial resistance profiles of the common pathogens isolated from urine from 2015 to 2021 in the CHINET Antimicrobial Resistance Surveillance Program.Methods The bacterial strains were isolated from urine and identified routinely in 51 hospitals across China in the CHINET Antimicrobial Resistance Surveillance Program from 2015 to 2021.Antimicrobial susceptibility was determined by Kirby-Bauer method,automatic microbiological analysis system and E-test according to the unified protocol.Results A total of 261 893 nonduplicate strains were isolated from urine specimen from 2015 to 2021,of which gram-positive bacteria accounted for 23.8％(62 219/261 893),and gram-negative bacteria 76.2％(199 674/261 893).The most common species were E.coli(46.7％),E.faecium(10.4％),K.pneumoniae(9.8％),E.faecalis(8.7％),P.mirabilis(3.5％),P.aeruginosa(3.4％),SS.agalactiae(2.6％),and E.cloacae(2.1％).The strains were more frequently isolated from inpatients versus outpatients and emergency patients,from females versus males,and from adults versus children.The prevalence of ESBLs-producing strains in E.coli,K.pneumoniae and P.mirabilis was 53.2％,52.8％and 37.0％,respectively.The prevalence of carbapenem-resistant strains in E.coli,K.pneumoniae,P.aeruginosa and A.baumannii was 1.7％,18.5％,16.4％,and 40.3％,respectively.Lower than 10％of the E.faecalis isolates were resistant to ampicillin,nitrofurantoin,linezolid,vancomycin,teicoplanin and fosfomycin.More than 90％of the E.faecium isolates were ressitant to ampicillin,levofloxacin and erythromycin.The percentage of strains resistant to vancomycin,linezolid or teicoplanin was＜2％.The E.coli,K.pneumoniae,P.aeruginosa and A.baumannii strains isolated from ICU inpatients showed significantly higher resistance rates than the corresponding strains isolated from outpatients and non-ICU inpatients.Conclusions E.coli,Enterococcus and K.pneumoniae are the most common pathogens in urinary tract infection.The bacterial species and antimicrobial resistance of urinary isolates vary with different populations.More attention should be paid to antimicrobial resistance surveillance and reduce the irrational use of antimicrobial agents.