This article provides a systematic interpretation and review of the Society of Critical Care Medicine 2024 Guidelines on Adult ICU Design. Developed based on the Grading of Recommendations Assessment, Development and Evaluation methodology, the guideline address five core themes: ICU layout, room design, infection control, infrastructure, and staff spaces, and put forward 17 evidence-based recommendations, including 5 good practice statements. This article briefly introduces the guideline development methods and evidence characteristics, and focuses on summarizing key recommendations, including high-visibility layouts, single-bed ward settings, natural lighting and noise reduction strategies, integrated infection prevention and control design, remote monitoring, and flexible capacity expansion capabilities. Furthermore, it delves into the applicability and localized implementation pathways within China's healthcare environment, analyzing limitations in terms of evidence quality, specialty applicability, and cost-effectiveness. Furthermore, by integrating the Chinese Guidelines for the Construction and Development of Critical Care Medicine (2025 Edition) and current domestic practices, the article proposes tiered and phased implementation recommendations. This article aims to provide domestic healthcare institutions with a scientific reference that balances international cutting-edge concepts with China's real-world conditions for the construction and renovation of ICUs, thereby promoting the development of intensive care environments centered on patient safety, healthcare worker well-being, and infection control.

OBJECTIVE To establish a method for simultaneous determination of venetoclax， busulfan and voriconazole in plasma of patients with acute myeloid leukemia （AML）， and apply it clinically. METHODS Plasma samples were subjected to protein precipitation using acetonitrile and subsequently analyzed by liquid chromatography-tandem mass spectrometry （LC-MS/MS） using venetoclax-D 8 ， busulfan-D 8 and posaconazole as internal standards. The separation was performed on a Phenomenex Kinetex ® C 18 column with a mobile phase composed of 0.1% formic acid solution （2 mmol/L ammonium acetate）-0.1% formic acid in acetonitrile （gradient elution） at a flow rate of 0.8 mL/min. The column temperature was set at 40 ℃， the sample size was 5 μL， and the total run time was 3.10 min. An electrospray ionization source was employed， and positive ion scanning was conducted using multiple reaction monitoring mode. The ion pairs used for quantitative analysis included m/z 868.4→636.3 （venetoclax）， m/z 264.1→151.1 （busulfan）， and m/z 350.1→224.0 （voriconazole）. The above LC-MS/MS method was adopted to determine plasma concentrations of venetoclax and voriconazole in 10 AML patients， as well as plasma concentration of busulfan in 5 patients undergoing conditioning treatment for allogeneic hematopoietic stem cell transplantation. RESULTS The linear ranges of venetoclax， busulfan and voriconazole were 50-10 000， 15-3 000 and 50-10 000 ng/mL， respectively （ R 2 ≥0.999 0）， with lower limits of quantification of 50， 15 and 50 ng/mL， respectively. The RSDs of intra-day and inter-day precision tests for all three analytes were all less than 10%， with accuracy （relative errors） ranging from －10.00% to 12.96%. The average extraction recovery ranged from 92.54% to 100.95%， and the average matrix effect was 89.98%-101.49%. Dilution reliability covered all dilution factors used in the test samples， and the absolute values of relative errors in stability tests were all≤16.25%. The plasma concentrations of venetoclax， busulfan and voriconazole in enrolled patients were 496.20-4 250.45， 233.48-2 002.28 and 475.51-5 710.18 ng/mL， respectively. CONCLUSIONS The LC-MS/MS method established in this study is rapid， sensitive and easy to operate， and can be used for the therapeutic drug monitoring of venetoclax， busulfan and voriconazole.

The endochondral ossification of the growth plate is crucial for the longitudinal growth of long bones. Mechanical loading plays an important regulatory role in endochondral ossification. Absence or improper mechanical loading can inhibit growth plate development, while moderate mechanical stimuli promote chondrocyte proliferation and differentiation, thereby facilitating long bone growth. Mechanosensitive structures, such as primary cilia, mechanosensitive ion channels, integrins, and the cytoskeleton, play key roles in the regulation of mechanical loading. This review summarizes how mechanical loading influences growth plate endochondral ossification and discusses potential underlying mechanisms, offering theoretical insights for the management and research of bone development disorders in children and adolescents.

Facing the requirements of promoting the healthy China initiative and improving people's health, the "bone health program" was proposed in 2024. In-depth development of a traditional Chinese medicine(TCM) prevention and control system is of strategic significance to the implementation of the "bone health program". Focusing on osteoporosis(OP), a representative disease affecting people's bone health, this paper concludes that accelerating the research on the prevention and control of OP by TCM is conducive to enhancing the knowledge and awareness of OP among the public, and it is beneficial to revealing the evolutionary pattern of OP and improving the understanding and management of this disease. Additionally, it can provide an overall framework for and strengthen the systematicity and completeness of the research on the prevention and treatment of OP by TCM. Meanwhile, it can help to explore new research paradigms and optimize the existing research model, so as to promote innovative breakthroughs in the prevention and treatment of bone health-related diseases by TCM. Under the overall layout of the "bone health program", importance should be attached to the early prevention and the innovation of very early diagnosis and intervention of OP. Emphasis should be put on the discovery of the target network of disease and treatment mechanism for revealing the core pathogenesis of OP and the therapeutic mechanism of TCM. In addition to local lesions of the bone and its clinical outcomes, attention should be paid to the development of multiple metabolic complications. The fusion of advanced interdisciplinary technologies should be promoted for OP and its complications, and thus a research and development system based on clinical application scenarios and driven by big data can be built. The measures above will facilitate the progress in the prevention and treatment of OP and other bone diseases by TCM and provide new momentum for enriching and deepening the research connotation of the "bone health program".
Osteoporosis/therapy* ; Humans ; Medicine, Chinese Traditional/methods* ; Drugs, Chinese Herbal/therapeutic use* ; China ; Bone and Bones/drug effects*

Forsythia suspensa is a traditional Chinese medicine and a commonly used landscaping plant. Its dried fruit is used in medicine for its functions of clearing heat, removing toxins, reducing swelling, dissipating masses, and dispersing wind and heat. It possesses extremely high medicinal and economic value. However, the genetic differentiation and diversity of its wild populations remain unclear. In this study, chloroplast genome sequences were obtained from 15 wild individuals of F. suspensa using high-throughput sequencing technology. The sequence characteristics and intraspecific variations were analyzed. The results were as follows:(1) The full length of the F. suspensa chloroplast genome ranged from 156 184 to 156 479 bp, comprising a large single-copy region, a small single-copy region, and two inverted repeat regions. The chloroplast genome encoded a total of 132 genes, including 87 protein-coding genes, 37 tRNA genes, and 8 rRNA genes.(2) A total of 166-174 SSR loci, 792 SNV loci, and 63 InDel loci were identified in the F. suspensa chloroplast genome, indicating considerable genetic variation among individuals.(3) Population structure analysis revealed that F. suspensa could be divided into five or six groups. Both the population structure analysis and phylogenetic reconstruction results indicated significant genetic variation within the wild populations of F. suspensa, with no obvious correlation between intraspecific genetic differentiation and geographical distribution. This study provides new insights into the genetic diversity and differentiation within F. suspensa species and offers additional references for the conservation of species diversity and the utilization of germplasm resources in wild F. suspensa.
Genome, Chloroplast ; Forsythia/classification* ; Phylogeny ; Genetic Variation ; Chloroplasts/genetics* ; Microsatellite Repeats

By employing the analytic hierarchy process(AHP), the CRITIC method(a weight determination method based on indicator correlations), and the AHP-CRITIC hybrid weighting method, the weight coefficients of evaluation indicators were determined, followed by a comprehensive score comparison. The grey correlation analysis was then performed to analyze the results calculated using the hybrid weighting method. Subsequently, a backpropagation-artificial neural network(BP-ANN) model was constructed to predict the extraction process parameters and optimize the extraction process for Shenxiong Huanglian Jiedu Granules(SHJG). In the extraction process, an L_9(3~4) orthogonal experiment was designed to optimize three factors at three levels, including extraction frequency, water addition amount, and extraction time. The evaluation indicators included geniposide, berberine, ginsenoside Rg_1 + Re, ginsenoside Rb_1, ferulic acid, and extract yield. Finally, the optimal extraction results obtained by the orthogonal experiment, grey correlation analysis, and BP-ANN method were compared, and validation experiments were conducted. The results showed that the optimal extraction process involved two rounds of aqueous extraction, each lasting one hour; the first extraction used ten times the amount of added water, while the second extraction used eight times the amount. In the validation experiments, the average content of each indicator component was higher than the average content obtained in the orthogonal experiment, with a higher comprehensive score. The optimized extraction process parameters were reliable and stable, making them suitable for subsequent preparation process research.
Drugs, Chinese Herbal/analysis* ; Neural Networks, Computer

Eight amide alkaloids(1-8) were isolated from the 70% ethanol extract of Cannabis Fructus using silica gel column chromatography, MCI column chromatography, and semi-preparative high-performance liquid chromatography(HPLC). Their structures were identified as hempspiramide A(1), N-[(4-hydroxyphenyl)ethyl]formamide(2), N-acetyltyramide(3), N-trans-p-coumaroyltyramine(4), N-trans-caffeoyltyramine(5), N-trans-feruloyltyramine(6), N-cis-p-coumaroyltyramine(7), N-cis-feruloyltyramine(8) by using spectroscopic methods such as NMR and MS. Among these compounds, compound 1 was a new amide alkaloid, while compounds 2 and 3 were isolated from Cannabis Fructus for the first time. Some of the isolates were assayed for their α-glucosidase inhibitory activity. Compounds 5-7 displayed significant inhibitory activity against α-glucosidase with IC_(50) values ranging from 1.07 to 4.63 μmol·L~(-1).
Cannabis/chemistry* ; Alkaloids/pharmacology* ; Amides/isolation & purification* ; Drugs, Chinese Herbal/isolation & purification* ; Fruit/chemistry* ; Molecular Structure ; alpha-Glucosidases/chemistry* ; Chromatography, High Pressure Liquid

Traditional Chinese medicine(TCM) is the pillar for the development of motherland medicine, and animal medicine has a long history of application in China, characterized by wide resources, strong activity, definite efficacy, and great benefits. It has significant potential and important status in the consumption market of raw materials of TCM. In the context of global climate change, farming system alterations, and low renewability, the depletion of wild medicinal animal resources has accelerated. Accordingly, the conservation and sustainable utilization of wild resources of animal medicinal materials has become a problem that garners increasing attention and urgently needs to be solved. This paper summarizes the current situation of domestic and foreign medicinal animal breeding and research progress in industrial application in recent years and points out the issues related to standardized breeding, germplasm selection and breeding, and quality evaluation standards for medicinal animals. Furthermore, this paper discusses standardized breeding, quality standards, resource protection and utilization, and the search for alternative resources for rare and endangered medicinal animals. It proposes that researchers should systematically carry out in-depth basic research on animal medicine, improve the breeding scale and level of medicinal animals, employ modern technology to enhance the quality standards of medicinal materials, and strengthen the research and development of alternative resources. This approach aims to effectively address the relationship between protection and utilization and make a significant contribution to the sustainable development of medicinal animal resources and the animal-based Chinese medicinal material industry.
Animals ; Breeding ; China ; Medicine, Chinese Traditional ; Conservation of Natural Resources

Microbial detection and control of traditional Chinese medicine(TCM) decoction pieces are crucial for the quality control of TCM preparations. It is also a key area of research in the measurement technology and equipment development for TCM manufacturing. Guided by TCM manufacturing measurement methodologies, this study presented a design of a novel portable microbial detection device, using Atractylodis Macrocephalae Rhizoma decoction pieces as a demonstration. Immunomagnetic separation technology was employed for specific isolation and labeling of target microorganisms. Enzymatic signal amplification was utilized to convert weak biological signals into colorimetric signals, constructing an optical biosensor. A self-developed smartphone APP was further applied to analyze the colorimetric signals and quantify target concentrations. A portable and automated detection system based on Arduino microcontroller was developed to automatically perform target microbial separation/extraction, as well as mimetic enzyme labeling and catalytic reactions. The developed equipment specifically focuses on the rapid and quantitative microbial analysis of TCM active pharmaceutical ingredients, intermediates in TCM manufacturing, and final TCM products. Experimental results demonstrate that the equipment could detect Salmonella in samples within 2 h, with a detection limit as low as 5.1 × 10~3 CFU·mL~(-1). The equipment enables the rapid detection of microorganisms in TCM decoction pieces, providing a potential technical solution for on-site rapid screening of microbial contamination indicators in TCM. It has broad application prospects in measurement technology for TCM manufacturing and offers strong technical support for the modernization, industrialization, and intelligent development of TCM.
Drugs, Chinese Herbal/analysis* ; Atractylodes/microbiology* ; Rhizome/microbiology* ; Biosensing Techniques/methods* ; Medicine, Chinese Traditional ; Colorimetry/instrumentation* ; Quality Control

OBJECTIVE: To compare the efficacy of percutaneous pedicle screw combined with unilateral nail placement combined with bone cement strengthening and bilateral nail placement in the treatment of osteoporotic thoracic and lumbar fractures. METHODS: A retrospective case-control study was used to analyze the clinical data of 78 patients with osteoporotic thoracic and lumbar fractures admitted from October 2017 to May 2019. According to the surgical method, it was divided into percutaneous pedicle screw combined with unilateral nail placement combined with unilateral bone cement strengthening group(bone cement group) and percutaneous pedicle screw combined with bilateral nail placement(screw group). In the bone cement group, 40 patients included 16 males and 24 females, with a mean age of (62.1±8.1) years old. In the screw group, 38 patients included 18 males and 20 females with a mean age of (65.1±9.3) years old. The operation time, intraoperative blood loss, length of hospital stay and postoperative complications were compared between two groups. The kyphosis Cobb angle, anterior edge height ratio, central height ratio and pain visual analogue score(VAS) were compared. RESULTS: All patients were followed up for 25 to 36 months. The operation time (70.1±17.3) min of the cement group was shorter than that of the screw group (78.6±18.2) min(P<0.05). There were no significant differences in intraoperative blood loss and length of hospital stay(P>0.05). The VAS in the cement group 1 year 1.5±0.5 and the latest follow-up 0.5±0.3 after operation were lower than 1 year 1.8±0.3 and the latest follow-up 0.8±0.4 in the screw group(P<0.05). The kyphosis Cobb angle, anterior edge height ratio, central height ratio in bone cement group, 1 year (6.2±1.2)°, (86.6±3.5)%, (91.1±2.5)%, the last follow-up (6.4±0.7)°, (85.5±3.3)%, (90.5±6.3)% were better than that of the screw group 1 year (6.8±1.4)°, (83.1±2.4)%, (89.9±3.4)% and the latest follow-up (7.1±1.1)°, (82.6±4.1)%, (87.6±5.9)%(P<0.05). There were 3 cases of bone cement leakage in the cement group, all of which had no clinical symptoms;and 2 cases of pedicle screws were extracted in the screw group, and the screws were removed at the last follow-up. CONCLUSION Percutaneous pedicle screw combined with unilateral nail placement combined with bone cement strengthening and bilateral nail placement in the treatment of osteoporotic thoracic and lumbar compression fractures in the elderly can achieve satisfactory efficacy and effectively relieve the pain of patients, but the former internal fixation system is more stable, and the long-term follow-up can effectively maintain the height of the anterior middle column and the correction of kyphosis deformity, and the incidence of chronic low back pain is lower.
Humans ; Male ; Female ; Aged ; Bone Cements ; Middle Aged ; Thoracic Vertebrae/surgery* ; Lumbar Vertebrae/surgery* ; Retrospective Studies ; Spinal Fractures/surgery* ; Osteoporotic Fractures/surgery* ; Case-Control Studies ; Bone Nails ; Pedicle Screws