The balance between growth and defense in response to nearby or canopy shading in heliotropic plants has been deeply understood. However, the adaptive traits developed by shade-tolerant plants through long-term evolution remain unclear. In this study, the typical shade-tolerant medicinal plant Anoectochilus roxburghii was used as the experimental material.(1) Different planting densities were set, including 8 cm(row spacing) × 8 cm(plant spacing), 6 cm × 6 cm, 4 cm × 4 cm, and 2 cm × 2 cm, to monitor the individual plant responses to nearby shading.(2) Different light environments, including blue light∶red light=3∶2(B3R2), blue light∶red light∶far-red light=3∶2∶1(B3R2FR1), blue light∶red light∶far-red light=3∶2∶2(B3R2FR2), and blue light∶red light∶far-red light=3∶2∶4(B3R2FR4), were set to monitor the morphological and physiological changes in plants in response to actual shading conditions. The results showed that:(1) Moderate increases in planting density helped optimize morphological traits such as stem diameter and leaf area. This not only slightly increased biomass but also significantly improved SOD activity in both leaves and stems, as well as lignin content in stems, thereby enhancing the plant's defense capabilities.(2) Increasing the far-red light in the light environment negatively regulated the plant height of A. roxburghii, which was contrary to the typical shade-avoidance response observed in heliotropic plants. However, it significantly enhanced SOD and POD activity in both stems and leaves, as well as lignin content in stems. Furthermore, it reduced the incidence and disease index of stalk rot, effectively defending against biotic stress. Therefore, the shade-tolerant plant A. roxburghii has specific adaptive strategies for shading conditions. Reasonable dense planting or light environment modulation can synergistically improve yield, medicinal quality, and resistance of A. roxburghii. This study provides a theoretical foundation and technical support for optimizing the regional deployment and cultivation strategies of ecological planting for Chinese medicinal materials.
Orchidaceae/genetics* ; Light ; Plant Leaves/physiology* ; Sunlight ; Adaptation, Physiological/radiation effects* ; Plant Proteins/genetics*

OBJECTIVE: To determine risk factors for cutout failure in geriatric intertrochanteric fracture patients after cephalomedullary nail fixation. METHODS: A retrospective review of 518 elderly patients who underwent cephalomedullary nail fixation for intertrochanteric fractures between January 2008 and August 2018 was conducted, including 167 males and 351 females, age from 65 to 97 years old. All patients were followed up for at least one year after surgery and divided into a healed group and a cutout group based on whether the hip screw cutout occurred. Among all patients, 10 cases experienced hip screw cutout. The general information, surgical data, and radiological data of the two groups were compared, and risk factors influencing hip screw cutout were analyzed. Propensity score matching was then performed on the cutout group based on gender, age, body mass index(BMI), and American Society of Anesthesiologists(ASA), and 40 patients from the healed group were matched at a ratio of 1∶4. Key risk factors affecting hip screw cutout were further analyzed. Multivariable logistic regression analysis was conducted to evaluate associations between variables and cutout failure. RESULTS: There were no statistically significant differences between the healed group and the cutout group in terms of age, gender, BMI, ASA, and AO classification. However, statistically significant differences were observed between the two groups in terms of reduction quality(P=0.003) and tip-apex distance(TAD), P<0.001. Multivariate analysis identified poor reduction quality OR=23.138, 95%CI(2.163, 247.551), P=0.009 and TAD≥25 mm OR=30.538, 95%CI(2.935, 317.770), P=0.004 as independent risk factors for cutout failure. CONCLUSION The present study identified poor reduction quality and TAD≥25 mm as factors for cutout failure in geriatric intertrochanteric fractures treated with cephalomedullary nails. Further studies are needed to calculate the optimal TAD for cephalomedullary nails.
Humans ; Male ; Female ; Hip Fractures/surgery* ; Aged, 80 and over ; Aged ; Risk Factors ; Retrospective Studies ; Fracture Fixation, Intramedullary/adverse effects* ; Bone Nails ; Bone Screws

COMPERA 2.0 risk stratification has been demonstrated to be useful in patients with precapillary pulmonary hypertension (PH). However, its suitability for patients at risk for post-capillary PH or PH associated with left heart disease (PH-LHD) is unclear. To investigate the use of COMPERA 2.0 in patients with severe aortic stenosis (SAS) undergoing transcatheter aortic valve replacement (TAVR), who are at risk for post-capillary PH, a total of 327 eligible SAS patients undergoing TAVR at our institution between September 2015 and November 2020 were included in the study. Patients were classified into four strata before and after TAVR using the COMPERA 2.0 risk score. The primary endpoint was all-cause mortality. Survival analysis was performed using Kaplan-Meier curves, log-rank test, and Cox proportional hazards regression model. The study cohort had a median (interquartile range) age of 76 (70‒80) years and a pulmonary arterial systolic pressure of 33 (27‒43) mmHg (1 mmHg=0.133 kPa) before TAVR. The overall mortality was 11.9% during 26 (15‒47) months of follow-up. Before TAVR, cumulative mortality was higher with an increase in the risk stratum level (log-rank, both P<0.001); each increase in the risk stratum level resulted in an increased risk of death (hazard ratio (HR) 2.53, 95% confidential interval (CI) 1.54‒4.18, P<0.001), which was independent of age, sex, estimated glomerular filtration rate (eGFR), hemoglobin, albumin, and valve type (HR 1.76, 95% CI 1.01‒3.07, P=0.047). Similar results were observed at 30 d after TAVR. COMPERA 2.0 can serve as a useful tool for risk stratification in patients with SAS undergoing TAVR, indicating its potential application in the management of PH-LHD. Further validation is needed in patients with confirmed post-capillary PH by right heart catheterization.
Humans ; Aortic Valve Stenosis/complications* ; Aged ; Hypertension, Pulmonary/mortality* ; Male ; Female ; Transcatheter Aortic Valve Replacement ; Aged, 80 and over ; Risk Assessment/methods* ; Proportional Hazards Models ; Kaplan-Meier Estimate ; Retrospective Studies

Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

OBJECTIVE: This study reports the first imported case of Lassa fever (LF) in China. Laboratory detection and molecular epidemiological analysis of the Lassa virus (LASV) from this case offer valuable insights for the prevention and control of LF. METHODS: Samples of cerebrospinal fluid (CSF), blood, urine, saliva, and environmental materials were collected from the patient and their close contacts for LASV nucleotide detection. Whole-genome sequencing was performed on positive samples to analyze the genetic characteristics of the virus. RESULTS: LASV was detected in the patient's CSF, blood, and urine, while all samples from close contacts and the environment tested negative. The virus belongs to the lineage IV strain and shares the highest homology with strains from Sierra Leone. The variability in the glycoprotein complex (GPC) among different strains ranged from 3.9% to 15.1%, higher than previously reported for the seven known lineages. Amino acid mutation analysis revealed multiple mutations within the GPC immunogenic epitopes, increasing strain diversity and potentially impacting immune response. CONCLUSION The case was confirmed through nucleotide detection, with no evidence of secondary transmission or viral spread. The LASV strain identified belongs to lineage IV, with broader GPC variability than previously reported. Mutations in the immune-related sites of GPC may affect immune responses, necessitating heightened vigilance regarding the virus.
Humans ; China/epidemiology* ; Genome, Viral ; Lassa Fever/virology* ; Lassa virus/classification* ; Molecular Epidemiology ; Phylogeny

Professor ZHOU Peng has deeply discussed the pathological characteristics of psoriasis vulgaris,emphasizing that the disease is usually manifested deficiency interweaved with excess,leading to frequent recurrence and persistent refractory,which may lead to psychological and emotional problems of patients.This paper further expounds the effect of blood stasis on the pathogenesis,progression and prognosis of psoriasis,and puts forward a new method of combining Lingnan fire needling and filiform needling acupuncture technique to treat psoriasis vulgaris with blood stasis syndrome.Professor ZHOU Peng believes that the treatment principle of this disease is"regulating the mind first,rectifying blood as a base,syndrome differentiating and eliminating pathogenic factors",aiming at comprehensively considering the etiology and symptoms,in order to achieve more effective treatment results.Combined with the analysis of dermoscopic signs,it provides a possible improvement direction for the treatment of psoriasis vulgaris from a new perspective.

Objective The aim of this study was to assess the impact of bisphenol A (BPA) and its substitute, bisphenol F (BPF), on the colonic fecal community structure and function of mice.Methods We exposed 6-8-week-old male C57BL/6 mice to 5 mg/(kg·day) and 50 μg/(kg·day) of BPA or BPF for 14 days. Fecal samples from the colon were analyzed using 16S rRNA sequencing. Results Gut microbiome community richness and diversity, species composition, and function were significantly altered in mice exposed to BPA or BPF. This change was characterized by elevated levels of Ruminococcaceae UCG-010 and Oscillibacter and decreased levels of Prevotella 9 and Streptococcus. Additionally, pathways related to carbohydrate and amino acid metabolism showed substantial enrichment. Conclusion Mice exposed to different BP analogs exhibited distinct gut bacterial community richness, composition, and related metabolic pathways. Considering the essential role of gut bacteria in maintaining intestinal homeostasis, our study highlights the intestinal toxicity of BPs in vertebrates.

Objective To investigate the clinical effect of unilateral percutaneous vertebroplasty(PVP)combined with 3D printing technology for the treatment of thoracolumbar osteoporotic compression fracture.Methods A total of 77 patients with thoracolumbar osteoporotic compression fractures from October 2020 to April 2022 were included in the study,all of which were vertebral body compression fractures caused by trauma.According to different treatment methods,they were di-vided into experimental group and control group.Thirty-two patients used 3D printing technology to improve unilateral transpedicle puncture vertebroplasty in the experimental group,there were 5 males and 27 females,aged from 63 to 91 years old with an average of(77.59±8.75)years old.Forty-five patients were treated with traditional bilateral pedicle puncture vertebroplasty,including 7 males and 38 females,aged from 60 to 88 years old with an average of(74.89±7.37)years old.Operation time,intraoperative C-arm X-ray times,anesthetic dosage,bone cement injection amount,bone cement diffusion good and good rate,complications,vertebral height,kyphotic angle(Cobb angle),visual analogue scale(VAS),Oswestry disability index(ODI)and other indicators were recorded before and after surgery,and statistically analyzed.Results All patients were followed up for 6 to 23 months,with preoperative imaging studies,confirmed for thoracolumbar osteoporosis com-pression fractures,two groups of patients with postoperative complications,no special two groups of patients'age,gender,body mass index(BMI),time were injured,the injured vertebral distribution had no statistical difference(P＞0.05),comparable data.Two groups of patients with bone cement injection,bone cement dispersion rate,preoperative and postoperative vertebral body height,protruding after spine angle(Cobb angle),VAS,ODI had no statistical difference(P＞0.05).The operative time,intra-operative fluoroscopy times and anesthetic dosage were statistically different between the two groups(P＜0.05).Compared with the traditional bilateral puncture group,the modified unilateral puncture group combined with 3D printing technology had shorter operation time,fewer intraoperative fluoroscopy times and less anesthetic dosage.The height of anterior vertebral edge,kyphosis angle(Cobb angle),VAS score and ODI of the affected vertebrae were statistically different between two groups at each time point after surgery(P＜0.05).Conclusion In the treatment of thoracolumbar osteoporotic compression fractures,3D printing technology is used to improve unilateral puncture PVP,which is convenient and simple,less trauma,short operation time,fewer fluoroscopy times,satisfactory distribution of bone cement,vertebral height recovery and kyphotic Angle correction,and good functional improvement.