Objective To investigate the relationship between tooth loss and the occurrence of esophageal cancer in a natural village in Wenfeng District, Anyang City, Henan Province. Methods A prospective cohort study was conducted to observe the occurrence of tooth loss and esophageal cancer among the asymptomatic residents of the natural village for 16 years from January 2008 to July 2024. Data were analyzed by chi-square test, binary logistic regression, and restricted cubic spline. Results Among the total population of 711 cases, 136 cases were lost to follow-up and 575 cases were included in the final statistics, including 45 cases with esophageal cancer. Significant statistical difference was found between esophageal cancer patients with and without tooth loss (P<0.05). Logistic regression analysis showed that tooth loss was associated with the occurrence of esophageal cancer (OR=3.977, 95%CI: 1.543-10.255). After the adjustment for confounders, tooth loss remained significantly associated with the occurrence of esophageal cancer (OR=3.038, 95%CI: 1.035-8.914). A nonlinear dose-response relationship was observed between the number of teeth lost and the incidence of esophageal cancer. When the number of teeth lost was less than 12, the risk of esophageal cancer increased with the number of teeth lost. When more than 12 teeth were lost, the risk of esophageal cancer decreased as the number of teeth lost increased. Conclusion Tooth loss is a risk factor for the occurrence of esophageal cancer in this natural village. When the number of teeth lost is less than 12, the risk of esophageal cancer increases with the number of teeth lost.

Qualitative and quantitative analysis methods for chemical components of different processed products of Corni Fructus were established to systematically characterize and identify these components, and the content of the main differential components was determined. The chemical components of different processed products of Corni Fructus were collected using ultra-high performance liquid chromatography-quadrupole time-of-flight tandem mass spectrometry(UPLC-Q-TOF-MS). Through analysis of self-built databases, literature, and reference standards, a total of 93 components were obtained, including 19 iridoids, 15 flavonoids, 16 organic acids, eight triterpenoids, eight tannins, four amino acids, two polysaccharides, five olefins, and 16 other compounds. Additionally, by using multivariate statistical methods, the differential components between different processed products of Corni Fructus were screened under the conditions of VIP>1.0 and FC<0.5 or FC>2.0 and P<0.05. The PCA and OPLS-DA results showed differences in the chemical components between different processed products of Corni Fructus. A total of 21 differential components were screened, including tartaric acid, morroniside, and rutin. On this basis, ultra-high performance liquid chromatography-triple quadrupole tandem mass spectrometry(UPLC-QqQ-MS/MS) was used to determine the content of 10 main common differential components, including gallic acid, morroniside, ursolic acid, loganin, swertiamarin, rutin, 5-hydroxymethylfurfural, cornuside Ⅰ, quercetin, and oleanolic acid. The above 10 components showed a good linear relationship within the determined concentration range, with the precision, stability, repeatability, and sample recovery rate all meeting the requirements. Compared with that in Corni Fructus, the content of iridoid glycosides in wine-prepared Corni Fructus and wine-and honey-prepared Corni Fructus decreased, while the content of gallic acid, rutin, quercetin, 5-hydroxymethylfurfural, ursolic acid, and oleanolic acid increased. Compared with wine-prepared Corni Fructus, wine-and honey-prepared Corni Fructus showed varying degrees of increase in all other components, except for a slight decrease in gallic acid content. In summary, this study clarified the influence of different processing methods on the chemical components of Corni Fructus, providing a theoretical basis for the scientific connotation, overall quality evaluation, and clinically rational application of Corni Fructus processing in the future.
Tandem Mass Spectrometry/methods* ; Chromatography, High Pressure Liquid/methods* ; Cornus/chemistry* ; Drugs, Chinese Herbal/chemistry* ; Fruit/chemistry*

As a new type of production factor that can empower the development of new quality productivity, the data element is an important engine to promote the high quality development of the industry. Traditional Chinese medicine(TCM) dispensing is the most basic work of TCM clinical pharmacy, and its quality directly affects the clinical efficacy of TCM. The integration of data elements and TCM dispensing can stimulate the innovation and vitality of the TCM dispensing industry and promote the high-quality and sustainable development of the industry. A large-scale, detailed, and systematic study on TCM dispensing was conducted. The innovative practice path of data fusion construction in the whole process of TCM dispensing was investigated by integrating the digital resources "nine full activities" of TCM dispensing, creating the digital dictionary of "TCM clinical information data elements", and exploring innovative applications of TCM dispensing driven by data and technology, so as to promote the standardized, digital, and intelligent development of TCM dispensing in medical health services. The research content of this project was successfully selected as the second batch of "Data element×" typical cases of National Data Administration in 2024, which is the only selected case in the field of TCM.
Medicine, Chinese Traditional/methods* ; Drugs, Chinese Herbal ; Humans

Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

The lacrimal gland organoids are innovative in vitro cultured tissue model that mimics the lacrimal gland, retaining its original histological and molecular biological properties. This model can more accurately reproduce the physiological environment of the lacrimal gland, including its ductal system and tear film protein secretion. It offers a new platform for studying the physiopathological basis of the lacrimal gland, establishing disease models, conducting regenerative medicine applications, and performing drug screening. Currently, organoids technology is continuously evolving, with ongoing updates to the methods for in vitro culturing of the lacrimal gland. These advancements gradually address challenges related to cultivation complexity, cost, and time, demonstrating a wide range of application potential. In this paper, we summarize the latest progress in lacrimal gland organoids research both domestically and internationally, exploring the development of lacrimal gland organoids, 3D construction technologies, and their potential for clinical applications, in order to provide new insights for clinical research on lacrimal gland-related diseases and to promote broader application of lacrimal gland organoids in drug development and personalized diagnosis and treatment.

The lacrimal gland organoids are innovative in vitro cultured tissue model that mimics the lacrimal gland, retaining its original histological and molecular biological properties. This model can more accurately reproduce the physiological environment of the lacrimal gland, including its ductal system and tear film protein secretion. It offers a new platform for studying the physiopathological basis of the lacrimal gland, establishing disease models, conducting regenerative medicine applications, and performing drug screening. Currently, organoids technology is continuously evolving, with ongoing updates to the methods for in vitro culturing of the lacrimal gland. These advancements gradually address challenges related to cultivation complexity, cost, and time, demonstrating a wide range of application potential. In this paper, we summarize the latest progress in lacrimal gland organoids research both domestically and internationally, exploring the development of lacrimal gland organoids, 3D construction technologies, and their potential for clinical applications, in order to provide new insights for clinical research on lacrimal gland-related diseases and to promote broader application of lacrimal gland organoids in drug development and personalized diagnosis and treatment.

BACKGROUND:Spinal canal decompression using uniportal endoscopic surgery is a new minimally invasive surgery in the treatment of lumbar spinal stenosis.However,this technique needs a steep learning curve and high requirements for surgical equipment and instruments,which limits its clinical application.We previously use the spinal endoscopy as a monitoring endoscopy and combined with unilateral biportal endoscopy to propose a hybrid technique of spinal endoscopy to achieve coaxial endoscopic operation and hands-separate operation. OBJECTIVE:To compare the clinical outcome of hybrid technique and uniportal endoscopic surgery in treatment of lumbar spinal stenosis with bilateral lower limb pain symptoms. METHODS:Ninety patients diagnosed of lumbar spinal stenosis with bilateral symptoms were included and retrospectively analyzed at First People's Hospital,Shanghai Jiao Tong University from August 2020 to August 2022.44 cases were included in group A(hybrid technique group),while 46 cases were included in group B(uniportal endoscopic surgery).The nerve decompression was observed during the surgery.Operation time,hospital stay time,and expenses were recorded in both groups.The visual analog scale scores of lower back pain and both lower extremities pain,Oswestry disability index scores of quality of life and excellent and good rate of modified Macnab criteria were recorded and compared at preoperative,postoperative 3 days,and postoperative 3 and 6 months. RESULTS AND CONCLUSION:(1)The operation time of group A was significantly shorter than that of group B(P<0.05).(2)The lower back pain and lower extremity pain of the severe side at postoperative 3 days,and 3 and 6 months were significantly relieved in both groups(P<0.05).The visual analog scale score of lower extremity pain on the mild side was significantly decreased at postoperative 3 days,3 and 6 months than preoperative score in the group A(P<0.05).The visual analog scale score of lower extremity pain on the mild side was significantly decreased at postoperative 3 days than preoperative score in the group B(P<0.05).The visual analog scale scores of lower extremity pain on the mild side at postoperative 3 and 6 months did not show significant difference than preoperative score in the group B.The comparison between the two groups showed that there was no significant difference in the visual analog scale scores of postoperative lower back pain and lower extremity pain of the severe side(P>0.05).The visual analog scale scores of lower extremity pain on the mild side in the group A were significantly lower than those of group B at postoperative 3 and 6 months(P<0.05).(3)The Oswestry disability index scores of both groups at postoperative 3 day were significantly lower than preoperative score(P<0.05),and there was no significant difference between the two groups 3 days after operation.Oswestry disability index scores of group A at postoperative 3 and 6 months were significantly decreased than preoperative score(P<0.05).The Oswestry disability index scores of group B at postoperative 3 and 6 months did not show significant differences than preoperative score(P>0.05).The comparison between the two groups showed the Oswestry disability index scores of group A were significantly lower than group B at postoperative 3 and 6 months(P<0.05).(4)The results of modified Macnab showed that the excellent and good rate of group A was significantly higher than that of group B(95%,78%,P<0.05).(5)It is indicated that the hybrid technique is a new spinal endoscopy technique,which has the advantages of less trauma and faster recovery as a minimally invasive surgery.The clinical outcome of hybrid technique is superior to that of uniportal endoscopic surgery in the treatment of lumbar spinal stenosis with bilateral symptoms.Additionally,it also has the advantages of good operational flexibility and high decompression efficiency as an open surgery.

BACKGROUND:Degenerative scoliosis is defined as a condition that occurs in adulthood with a coronal cobb angle of the spine>10° accompanied by sagittal deformity and rotational subluxation,which often produces symptoms of spinal cord and nerve compression,such as lumbar pain,lower limb pain,numbness,weakness,and neurogenic claudication.The finite element method is a mechanical analysis technique for computer modelling,which can be used for spinal mechanics research by building digital models that can realistically restore the human spine model and design modifications. OBJECTIVE:To review the application of finite element method in the etiology and treatment of degenerative scoliosis. METHODS:The literature databases CNKI,PubMed,and Web of Science were searched for articles on the application of finite element method in degenerative scoliosis published before October 2023.Search terms were"finite element analysis,biomechanics,stress analysis,degenerative scoliosis,adult spinal deformity"in Chinese and English.Fifty-four papers were finally included. RESULTS AND CONCLUSION:(1)The biomechanical findings from the degenerative scoliosis model constructed using the finite element method were identical to those from the in vivo experimental studies,which proves that the finite element method has a high practical value in degenerative scoliosis.(2)The study of the etiology and treatment of degenerative scoliosis by the finite element method is conducive to the prevention of the occurrence of the scoliosis,slowing down the progress of the scoliosis,the development of a more appropriate treatment plan,the reduction of complications,and the promotion of the patients'surgical operation.(3)The finite element method has gradually evolved from a single bony structure to the inclusion of soft tissues such as muscle ligaments,and the small sample content is increasingly unable to meet the research needs.(4)The finite element method has much room for exploration in degenerative scoliosis.

Objective To investigate the factors affecting the distribution of Pomacea and project the trends in the spread of suitable distribution areas of Pomacea in 2050 and 2070 in Dali Bai Autonomous Prefecture, so as to provide insights into Pomacea control in the prefecture. Methods The longitudes and latitudes of Pomacea sampling sites were captured based on Pomacea field survey data in 12 cities (counties) of Dali Bai Autonomous Prefecture from 2023 to 2024. A total of 19 climatic factors (annual mean temperature, mean diurnal range, isothermality, temperature seasonality, maximum temperature of the warmest month, minimum temperature of the coldest month, temperature annual range, mean temperature of the wettest quarter, mean temperature of the driest quarter, mean temperature of the warmest month, mean temperature of the coldest month, annual precipitation, precipitation of the wettest month, precipitation of the driest month, precipitation seasonality, precipitation of the wettest quarter, precipitation of the driest quarter, mean temperature of the warmest quarter, and mean temperature of the coldest quarter) and representative concentration pathways (RCPs) were retrieved from the world climate database (www.worldclim.org). All climatic variables were employed to create a maximum entropy (MaxEnt) model. The predictive accuracy of the model was assessed with the area under the receiver operating characteristic (ROC) curve (AUC), and the contributions of these 19 climatic factors to the distribution of Pomacea were analyzed in Dali Bai Autonomous Prefecture using Jackknife test. In addition, the suitable distribution areas of Pomacea were predicted with the MaxEnt model in Dali Bai Autonomous Prefecture in 2024 and in 2050 and 2070 under RCP4.5. Results Data pertaining to 91 Pomacea sampling sites were captured. ROC analysis revealed the MaxEnt model had an AUC value of 0.885 ± 0.088 for predicting the suitable distribution areas of Pomacea in Dali Bai Autonomous Prefecture. Of the 19 climatic factors, the maximum temperature of the warmest month had the highest contribution to the distribution of Pomacea in Dali Bai Autonomous Prefecture, followed by mean temperature of the driest quarter, mean temperature of the wettest quarter and minimum temperature of the coldest month. The suitable distribution area of Pomacea was predicted to be 14 555.69 km² in Dali Bai Autonomous Prefecture in 2024, and would expand gradually to the southeastern part of the prefecture in the future due to climatic factors. The suitable distribution areas of Pomacea were projected to expand to 21 475.61 km² in 2050 and 25 782.52 km² in 2070 in Dali Bai Autonomous Prefecture, respectively. Conclusions Temperature is an important contributor to the distribution of Pomacea in Dali Bai Autonomous Prefecture, and the suitable distribution area of Pomacea will gradually expand to the southeastern part of the prefecture in 2050 and 2070.

Objective To assess the risk of hearing loss caused by occupational noise exposure in workers in an automobile manufacturing plant in Tianjin, China, and to perform risk management. Methods Occupational health field investigation and noise exposure measurements were conducted from July to December 2023, and physical examination data were collected. ISO 1999:2013(E) Acoustics-Estimation of Noise-Induced Hearing Loss and WS/T 754-2016 ^“Guidelines for Risk Management of Occupational Disease Hazards Caused by Noise^” were used to predict the risk of high-frequency hearing loss and occupational noise induced deafness for operational workers and make a risk classification. Results The noise intensity of each workshop was 79.4 to 95.5 dB(A), and the maximum noise intensity of welding and stamping exceeded the standard. The results of the assessment showed that the noise level remained unchanged, and the risk of HFHL and ONID in workers increased as the predicted age and length of service increased. It was predicted that after the age of 40, the maximum risk of hearing loss in welding workers would be high risk, and the risk of stamping workers would be at higher risk, suggesting that welding and stamping were the key control posts of noise hazards in the enterprise. The N50 prediction values of permanent hearing threshold displacement caused by potential noise at all frequencies for final assembly and painting workers were lower than the measured values. Conclusion The consequences of hearing loss for workers in the welding and stamping shop noise operations at this automobile manufacturing plant are relatively serious and require risk management.