Objective: To analyze the school tuberculosis (TB) outbreaks and preventive treatment in Hefei from 2022 to 2024, so as to provide reference for TB prevention and control in schools. Methods: Data were collected on all school based TB outbreaks occurring during 2022-2024 in Hefei, defined as ≥2 epidemiologically linked TB cases within the same school during a single semester. Statistical analyses were performed using the Chi square test. Results: Close contacts exhibited significantly higher TB incidence (2.88%) and latent mycobacterium tuberculosis infection (LTBI) rates (13.80%) in the school TB outbreaks, compared to non close contacts (0.12% and 2.63%, respectively). Among close contacts, secondary school students showed lower TB incidence (0.48%) and LTBI prevalence (3.42%) than both primary school or younger children (0.68%, 6.95%) and college students ( 0.78% , 6.50%), with statistically significant differences ( χ 2=360.91, 6.37; 791.71, 102.03, all P <0.05). The proportion of LTBI individuals recommended for preventive therapy was higher in primary school or younger groups (98.59%) than in secondary (95.25%) or college students (86.34%) ( χ 2=25.86, P <0.01). However, among those recommended, close contacts had higher uptake (85.82%) and completion rates (87.25%) of preventive therapy than non close contacts (69.63% and 70.57%); similarly, secondary school students demonstrated higher uptake (91.21%) and completion rates (86.45%) compared to primary school or younger (88.57%, 83.87%) and college students (57.28%, 64.08%) ( χ 2=30.52, 26.72; 125.17, 38.84, all P <0.01). Subsequent TB incidence among LTBI close contacts (13.30%) and among those who did not complete preventive therapy (22.73%) were significantly higher than among non close contacts (2.80%, 2.41%), respectively ( χ 2=32.19, 13.87, both P <0.05). Conclusions In school TB outbreaks, close contacts face higher LTBI prevalence and subsequent TB risk than non close contacts. College students show notably low adherence to preventive therapy. It is necessary to take targeted measures to improve the compliance of preventive measures among students.

Five compounds were isolated and purified from the water extract of Elaeagnus oxycarpa Schlechtend leaf by multi-dimensional reversed-phase preparative liquid chromatographic system based on the separation and enrichment model. Their structures were identified by spectral analysis such as NMR, MS, UV, IR and by comparison with literature information as 2,4(1H,3H)-pyrimidinedione (1), elaeagnussugarester B (2), elaeagnussugarester A (3), elaeagnussugarester C (4), gallic acid (5). Compounds 2-4 are new compounds, compound 1 was isolated from Elaeagnus oxycarpa Schlechtend for the first time. The antioxidant and anti-tyrosinase activities of these compounds were evaluated by using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical method, the 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) free radical method, the potassium ferricyanide reduction method and the colorimetric method with L-tyrosine as substrate. The results showed that compounds 2-5 have good antioxidant activities and inhibitory effect on tyrosinase. Compound 4 exhibited the most strong antioxidant activities, with IC₅₀ = 3.59 ± 0.06 μmol·L^-1 for DPPH free radical scavenging ability, IC₅₀ = 10.04 ± 0.20 μmol·L^-1 for ABTS free radical scavenging ability, and total reduction capacity of compound 4 was better than vitamin C respectively. Compound 3 possessed better inhibitory effect on tyrosinase with IC₅₀ = 0.25 ± 0.06 mmol·L^-1.

BACKGROUND:Degenerative scoliosis is defined as a condition that occurs in adulthood with a coronal cobb angle of the spine>10° accompanied by sagittal deformity and rotational subluxation,which often produces symptoms of spinal cord and nerve compression,such as lumbar pain,lower limb pain,numbness,weakness,and neurogenic claudication.The finite element method is a mechanical analysis technique for computer modelling,which can be used for spinal mechanics research by building digital models that can realistically restore the human spine model and design modifications. OBJECTIVE:To review the application of finite element method in the etiology and treatment of degenerative scoliosis. METHODS:The literature databases CNKI,PubMed,and Web of Science were searched for articles on the application of finite element method in degenerative scoliosis published before October 2023.Search terms were"finite element analysis,biomechanics,stress analysis,degenerative scoliosis,adult spinal deformity"in Chinese and English.Fifty-four papers were finally included. RESULTS AND CONCLUSION:(1)The biomechanical findings from the degenerative scoliosis model constructed using the finite element method were identical to those from the in vivo experimental studies,which proves that the finite element method has a high practical value in degenerative scoliosis.(2)The study of the etiology and treatment of degenerative scoliosis by the finite element method is conducive to the prevention of the occurrence of the scoliosis,slowing down the progress of the scoliosis,the development of a more appropriate treatment plan,the reduction of complications,and the promotion of the patients'surgical operation.(3)The finite element method has gradually evolved from a single bony structure to the inclusion of soft tissues such as muscle ligaments,and the small sample content is increasingly unable to meet the research needs.(4)The finite element method has much room for exploration in degenerative scoliosis.

Body weight abnormalities, including overweight, obesity, and underweight, have become a dual public health challenge in Chinese adults: overweight and obesity lead to a variety of chronic complications, while underweight increases the risks of malnutrition, sarcopenia, and organ dysfunction. To systematically address these issues, multidisciplinary experts in endocrinology, sports science, nutrition, and psychiatry from various regions have held multiple weight management seminars. Based on the latest epidemiological data and clinical evidence, they expanded the guideline to include assessment and intervention strategies for underweight, in addition to the core content of obesity management. This guideline outlines the etiological mechanisms, evaluation methods, and multidimensional management strategies for overweight and obesity, covering key areas such as diagnosis and assessment, medical nutrition therapy, exercise prescription, pharmacological intervention, and psychological support. It is intended to provide a scientific and standardized approach to weight management across the adult population, aiming to curb the rising prevalence of obesity, mitigate complications associated with abnormal body weight, and improve nutritional status and overall quality of life.

Epilepsy,as the second most common neurological disease,has diverse causes,complex,difficult to treat,and disabling characteristics,which impose a heavy burden on patients' families and social life.Long term recurrent epileptic seizures and poor control lead to neuronal inactivation and cognitive impairment in patients.Therefore,it is becoming increasingly important to find new targeted treatment methods and explore the molecular regulatory mechanisms of epilepsy on neuronal damage.Iron induced cell death is a novel programmed cell death mediated by ferrous ions,characterized by the accumulation of ferrous ions,harmful lipid peroxides,and lethal reactive oxygen species,leading to damage to mitochondrial function and structure.With recent in-depth research on ferroptosis,it has been found that inhibiting ferroptosis related targets and pathways can alleviate seizures and progression of epilepsy and protect neurons.This article provides a brief overview of the molecular mechanisms and related regulation of ferroptosis,its role in epilepsy,and recent advances in related treatments.

Osteoporosis is a prevalent skeletal condition characterized by reduced bone mass and strength, leading to increased fragility. Buqi-Tongluo (BQTL) decoction, a traditional Chinese medicine (TCM) prescription, has yet to be fully evaluated for its potential in treating bone diseases such as osteoporosis. To investigate the mechanism by which BQTL decoction inhibits osteoclast differentiation in vitro and validate these findings through in vivo experiments. We employed MTS assays to assess the potential proliferative or toxic effects of BQTL on bone marrow macrophages (BMMs) at various concentrations. TRAcP experiments were conducted to examine BQTL's impact on osteoclast differentiation. RT-PCR and Western blot analyses were utilized to evaluate the relative expression levels of osteoclast-specific genes and proteins under BQTL stimulation. Finally, in vivo experiments were performed using an osteoporosis model to further validate the in vitro findings. This study revealed that BQTL suppressed receptor activator of NF-κB ligand (RANKL)-induced osteoclastogenesis and osteoclast resorption activity in vitro in a dose-dependent manner without observable cytotoxicity. The inhibitory effects of BQTL on osteoclast formation and function were attributed to the downregulation of NFATc1 and c-fos activity, primarily through attenuation of the MAPK, NF-κB, and Calcineurin signaling pathways. BQTL's inhibitory capacity was further examined in vivo using an ovariectomized (OVX) rat model, demonstrating a strong protective effect against bone loss. BQTL may serve as an effective therapeutic TCM for the treatment of postmenopausal osteoporosis and the alleviation of bone loss induced by estrogen deficiency and related conditions.
Animals ; NFATC Transcription Factors/genetics* ; Drugs, Chinese Herbal/pharmacology* ; Ovariectomy ; Osteoclasts/metabolism* ; Female ; Osteogenesis/drug effects* ; Rats, Sprague-Dawley ; Rats ; NF-kappa B/genetics* ; Osteoporosis/genetics* ; Signal Transduction/drug effects* ; Bone Resorption/genetics* ; Cell Differentiation/drug effects* ; Humans ; RANK Ligand/metabolism* ; Mitogen-Activated Protein Kinases/genetics* ; Transcription Factors

Objective:To investigate the significance of serum β2-microglobulin(β2-MG)for survival and relapse of patients with diffuse large B-cell lymphoma(DLBCL)in the rituximab era.Methods:Clinical data of 92 patients with DLBCL admitted from December 2003 to July 2015 were retrospectively analyzed.The optimal cutoff value of β2-MG levels for predicting prognosis of the DLBCL patients was determined using receiver operating characteristic(ROC)curve.Kaplan-Meier analysis was used to estimate progression-free survival(PFS)and overall survival(OS).Cox logistic regression analysis was used to explore potential prognostic factors associated with survival.Binary logistic regression analysis was used to analyze the relationship between various factors and relapse.Results:The most discriminative cutoff value for β2-MG level was determined to be 2.25 mg/L by the ROC curve.Subgroup analysis showed that patients in the elevated β2-MG(＞2.25 mg/L)group had significantly worse PFS(P=0.006)and a trend toward worse OS compared with those in the low β2-MG(≤2.25 mg/L)group(P=0.053).Univariate analysis showed that elevated β2-MG,age＞60 years,Ann Arbor stage Ⅲ-Ⅳ,as well as IPI score ≥ 3 were associated with worse PFS.Binary logistic regression analysis showed that age＞60 years and β2-M G＞2.25 mg/L were potential influencing factors for relapse of DLBCL patients.Conclusion:Serum β2-MG might be an important predictor for the survival and relapse of DLBCL patients in the rituximab era.

BACKGROUND:The highest incidence of spinal fracture is in the thoracolumbar segment,and its symptoms are back pain,posterior convexity deformity,activity limitation,or with spinal cord nerve injury causing lower limb pain,numbness,and even paraplegia and other complications.The finite element method is a digital computer modeling technique,which can simulate the physical model and carry out force analysis realistically.OBJECTIVE:To review the application of finite element method in thoracolumbar spine fractures.METHODS:We searched the Chinese and English literature databases PubMed,Web of Science,and CNKI for relevant literature on the application of the finite element analysis method in spinal thoracolumbar fracture published before March 2024.The search terms in Chinese and English were:finite element analysis methods,biomechanical phenomena,stress analysis,thoracolumbar fractures,spinal fractures.Finally,55 papers were included.RESULTS AND CONCLUSION:(1)The exploration of thoracolumbar fractures caused by different etiologies(osteoporotic,traumatic,and pathological)through the finite element method is conducive to a deeper understanding of the biomechanics of various types of thoracolumbar fractures,and to improve the individualized and fine-tuned treatment of thoracolumbar fractures.(2)The finite element analysis of a single sample or a small number of samples has the chance,and a larger number of samples are required for the future finite element analysis to reduce the chance caused by the sample.(3)The rigid structure of bones alone cannot meet the biomechanical working conditions of the integrity of the physical object,and future finite element models need to incorporate all the structures of the physical object(e.g.,soft tissues,such as muscles and ligaments)as far as possible.(4)The finite element method has been used in more studies on osteoporotic and traumatic thoracolumbar spine fractures,which will need to be more in-depth in the future,and less in the field of pathologic thoracolumbar fractures,which has a wider scope for future research.

Objective:To construct a Boston matrix-based management model for operational quality of hospital's equipment for diagnosis and treatment,so as to achieve management with comprehensive process for operational quality of them.Methods:Combining evaluation indicators of operational quality of equipment for diagnosis and treatment,the stability and safety were quantified to construct the management model for operational quality of the safety of hospital's equipment for diagnosis and treatment by using the Boston matrix.From January 2023 to January 2024,a total of 300 equipment for diagnosis and treatment in clinical use of JuYe County People's Hospital were enrolled.Using a random number table method,150 equipment adopted conventional management mode,while the other 150 equipment adopted the Boston matrix-based management model for operational quality of hospital's equipment for diagnosis and treatment(Boston matrix management mode)to conduct management.The standardization of test for equipment performance,management quality of operation,and multi-dimensional efficacy scores were compared between the two management modes.A self-designed questionnaire was adopted to investigate satisfactions of engineers,doctors,nurses,and patients for two kinds of management modes,who involved in using equipment.Results:In 150 tests for performance,which adopted Boston matrix-based management mode,the standardization degrees of environmental management,parameter settings,equipment operation and record feedback were respectively 94%,93.33%,92.67%and 92.67%,all of them were significantly higher than those of conventional management mode(x2=12.997,14.361,13.830,12.891,P<0.05).The scores of resource allocation,technical support,information infrastructure,and management performance for equipment were(92.36±3.57),(91.69±4.36),(92.54±3.69)and(93.54±4.36)points in Boston matrix management mode,respectively,and all of them were significantly higher than those in conventional management mode,and the differences were significant(t=18.673,12.439,12.377,12.509,P<0.05).The scores of utilization efficacy,maintenance efficacy,and repair efficacy in using equipment under Boston matrix management mode were all significantly higher than those in conventional management mode,and the differences were significant(t=13.149,12.344,12.864,P<0.05).Satisfaction scores from engineers for equipment,doctors,nurses,and patients for operation of equipment for diagnosis and treatment,which adopted Boston matrix management mode,were all higher than those of adopting conventional management mode,and the differences were significant(t=13.1504,16.064,11.139,13.605,P<0.05).Conclusion:The Boston matrix-based management model for operational quality of hospital's equipment for diagnosis and treatment can be used in the quantitative analysis of safety and stability of equipment,and realize safe management with comprehensive process for equipment,and enhance medical service quality,and improve utilization efficacy of equipment.

Surgical intervention for malignant bone tumors frequently results in bone defects located at the metaphysis of the long bones in the lower extremities.The morphological heterogeneity of the metaphysis poses significant challenges for conventional treatment methods to adequately conform to the defect area.The utilization of three-dimensional(3D)-printed titanium bone repair scaffolds has emerged as an effective reconstructive approach for metaphyseal bone defects,as these scaffolds offer precise shape conformity and provide adequate mechanical support.However,the current commonly used scaffolds do not adequately replicate the biomechanical environment of bone defects,resulting in suboptimal bone ingrowth within the scaffolds and subsequent prosthesis loosening and failure post-operation.Bone is a highly force-responsive organ,and its fate is regulated by biomechanical signals.Consequently,designing scaffolds with consideration of biomechanical principles to ensure mechanical compatibility between the scaffolds and the bone defect sites is a critical factor influencing the success of bone defects reconstruction.This review primarily introduces the biomechanical factors influencing bone defect repair and the advancements in designing 3D-printed titanium bone repair scaffolds biomechanically matched with bones,offering theoretical guidance for scaffold design and preparation.