Electroencephalogram (EEG) is a non-invasive, high temporal-resolution technique for monitoring brain activity. However, affected by the volume conduction effect, EEG has a low spatial resolution and is difficult to locate brain neuronal activity precisely. The surface Laplacian (SL) technique obtains the Laplacian EEG (LEEG) by estimating the second-order spatial derivative of the scalp potential. LEEG can reflect the radial current activity under the scalp, with positive values indicating current flow from the brain to the scalp (“source”) and negative values indicating current flow from the scalp to the brain (“sink”). It attenuates signals from volume conduction, effectively improving the spatial resolution of EEG, and is expected to contribute to breakthroughs in neural engineering. This paper provides a systematic overview of the principles and development of SL technology. Currently, there are two implementation paths for SL technology: current source density algorithms (CSD) and concentric ring electrodes (CRE). CSD performs the Laplace transform of the EEG signals acquired by conventional disc electrodes to indirectly estimate the LEEG. It can be mainly classified into local methods, global methods, and realistic Laplacian methods. The global method is the most commonly used approach in CSD, which can achieve more accurate estimation compared with the local method, and it does not require additional imaging equipment compared with the realistic Laplacian method. CRE employs new concentric ring electrodes instead of the traditional disc electrodes, and measures the LEEG directly by differential acquisition of the multi-ring signals. Depending on the structure, it can be divided into bipolar CRE, quasi-bipolar CRE, tripolar CRE, and multi-pole CRE. The tripolar CRE is widely used due to its optimal detection performance. While ensuring the quality of signal acquisition, the complexity of its preamplifier is relatively acceptable. Here, this paper introduces the study of the SL technique in resting rhythms, visual-related potentials, movement-related potentials, and sensorimotor rhythms. These studies demonstrate that SL technology can improve signal quality and enhance signal characteristics, confirming its potential applications in neuroscientific research, disease diagnosis, visual pathway detection, and brain-computer interfaces. CSD is frequently utilized in applications such as neuroscientific research and disease detection, where high-precision estimation of LEEG is required. And CRE tends to be used in brain-computer interfaces, that have stringent requirements for real-time data processing. Finally, this paper summarizes the strengths and weaknesses of SL technology and envisages its future development. SL technology boasts advantages such as reference independence, high spatial resolution, high temporal resolution, enhanced source connectivity analysis, and noise suppression. However, it also has shortcomings that can be further improved. Theoretically, simulation experiments should be conducted to investigate the theoretical characteristics of SL technology. For CSD methods, the algorithm needs to be optimized to improve the precision of LEEG estimation, reduce dependence on the number of channels, and decrease computational complexity and time consumption. For CRE methods, the electrodes need to be designed with appropriate structures and sizes, and the low-noise, high common-mode rejection ratio preamplifier should be developed. We hope that this paper can promote the in-depth research and wide application of SL technology.

OBJECTIVE: To explore the effectiveness and feasibility of two osteotomy guides in medial open wedge high tibial osteotomy (MOWHTO). METHODS: Clinical data of 103 patients who underwent routine MOWHTO surgery between January 2020 and December 2022 were collected for retrospective analysis. The patients were divided into two groups based on the method of osteotomy guide plate. The control group of 51 patients received traditional osteotomy guide plate technique, including 17 males and 34 females, aged from 48 to 68 years old with an average of(57.93±4.82) years old, with a disease duration ranged from 1 to 8 years with an average of (4.89±1.49) years. The observation group of 52 patients received personalized osteotomy guide plate technique, including 23 males and 29 females, aged from 48 to 69 with an average of (58.22±5.10) years, with a disease duration ranged from 1 to 9 years with an average of(5.10±1.55) years. The perioperative indicators, complications, and knee joint recovery rate were statistically analyzed for both groups, as well as the preoperative and postoperative coagulation function, fibrinogen (FIB), D-dimer (D-D), gait parameters (step frequency, step length, step speed), biomechanical indicators, weight bearing line (WBL), medial proximal tibial angle (MPTA), joint line conergence angle (JLCA), and anterior cruciate ligament (ACL) function (body width, tibial anterior displacement). RESULTS: All patients were followed up for 6 months. The intraoperative blood loss, operation time, and number of fluoroscopic views in the observation group were (358.58±93.76) ml, (84.42±8.17) min, and (2.00±0.44) times, respectively, which were all less than those in the control group (465.55±105.38) ml, (96.53±10.51) min, and (6.31±0.58) times (P<0.05). Three days after surgery, the FIB and D-D levels in the observation group were (4.21±0.48) g·L^-1 and (204.47±35.59) μg·L^-1, respectively, which were both lower than those in the control group (5.56±0.57) g·L^-1 and (311.12±42.23) μg·L^-1 (P<0.05). Three months after surgery, the step frequency, step length, and step speed in the observation group were (1.89±0.23) steps·s^-1, (0.57±0.15) m, and (0.99±0.11) m·s^-1, respectively, which were all higher than those in the control group (1.80±0.18) steps·s^-1, (0.50±0.14) m, and (0.95±0.09) m·s^-1 (P<0.05). Three months after surgery, the WBL and MPTA in the observation group were (45.53±4.41)% and (87.03±8.15)°, respectively, which were both higher than those in the control group (38.38±4.36)% and (83.68±8.50)°, and the JLCA was (2.36±0.24)°, which was lower than that in the control group (2.61±0.33)° (P<0.05). The ACL body width during internal fixation removal was (5.60±0.51) mm, which was greater than that in the control group (5.08±0.56) mm, and the tibial migration was (5.70±0.42) mm, which was less than that in the control group (6.33±0.48) mm (P<0.05). There was no significant difference in the incidence of complications between the two groups (P>0.05). Six months after surgery, there was no significant difference in the recovery rate of knee joint between the two groups (P>0.05). CONCLUSION The application of personalized osteotomy guide technique in MOWHTO can help improve knee biomechanics and ACL function, and has less effect on coagulation function and no increase in complications.
Humans ; Male ; Female ; Osteotomy/methods* ; Middle Aged ; Tibia/physiopathology* ; Aged ; Biomechanical Phenomena ; Retrospective Studies ; Osteoarthritis, Knee/physiopathology*

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

Cervical spine health issues not only seriously affect patients' quality of life but also impose a heavy burden on the social healthcare system. Existing guidelines lack sufficient clinical guidance on lifestyle and work habits, such as exercise, posture, daily routine, and diet, making it difficult to meet practical needs. To address this, relying on the China Association of Chinese Medicine, Wangjing Hospital of China Academy of Chinese Medical Sciences took the lead and joined hands with more than ten institutions to form a multidisciplinary guideline development group. For the first time, the group developed the Guidelines for Cervical Spine Health Intervention based on evidence-based medicine methods, strictly following the standardized procedures outlined in the World Health Organization Handbook for Guideline Development and the Guiding Principles for the Formulation/Revision of Clinical Practice Guidelines in China (2022 Edition). This proposal systematically explains the methods and steps for developing the guideline, aiming to make the guideline development process scientific, standardized, and transparent.
Humans ; Practice Guidelines as Topic/standards* ; Cervical Vertebrae ; China

BACKGROUND: Lung cancer is the leading malignancy in China in terms of both incidence and mortality. With increased health awareness and the widespread use of low-dose computed tomography (CT), early diagnosis rates have been steadily improving. Surgical intervention remains the primary treatment option for early-stage lung cancer, and video-assisted thoracoscopic surgery (VATS) has become a common approach due to its minimal invasiveness and rapid recovery. However, post-discharge recovery remains incomplete, underscoring the importance of postoperative care. Traditional follow-up methods, lack standardization, consume significant medical resources, and increase the burden of the patients. Artificial intelligence (AI)-driven disease management platforms offer a novel solution to optimize postoperative follow-up. This study followed 463 lung cancer surgery patients using an AI-based platform, aiming to identify common postoperative issues, propose solutions, improve quality of life, reduce recurrence-related costs, and promote AI integration in healthcare. METHODS: Using the AI disease management platform, this study integrated educational videos, collaboration between healthcare teams and AI assistants, daily health logs, health assessment forms, and personalized interventions to monitor postoperative recovery. The postoperative rehabilitation status of the patients was assessed by the Leicester Cough Questionnaire (LCQ-MC). Two independent t-test and one-way ANOVA were used to analyze the causes of postoperative cough in lung cancer. RESULTS: Most issues occurred within 7 d post-discharge, significantly declined on 14 d post-discharge. Factors such as gender, smoking history, and surgical approaches were found to influence cough recovery. The incidence of cough on 7 d post-discharge in females was higher than that in males (P<0.01), while the incidence of cough on 14 d post-discharge in elderly patients was lower than that in young patients (P=0.03). The AI-based platform effectively addressed cough, pain, and sleep disturbances through phased interventions. CONCLUSIONS The AI-based platform significantly enhanced postoperative management efficiency and the self-care capabilities of the patients, particularly in phased cough management. Future integration with wearable devices could enable more precise and personalized postoperative care, further advancing the application of AI technology across multidisciplinary healthcare domains.
Humans ; Lung Neoplasms/rehabilitation* ; Male ; Female ; Middle Aged ; Aged ; Patient Discharge ; Artificial Intelligence ; Adult ; Postoperative Care ; Postoperative Period ; Disease Management ; Quality of Life

BACKGROUND: Non-invasive computed tomography angiography (CTA)-based fractional flow reserve (CT-FFR) could become a gatekeeper to invasive coronary angiography. Deep learning (DL)-based CT-FFR has shown promise when compared to invasive FFR. To evaluate the performance of a DL-based CT-FFR technique, DeepVessel FFR (DVFFR). METHODS: This retrospective study was designed for iScheMia Assessment based on a Retrospective, single-center Trial of CT-FFR (SMART). Patients suspected of stable coronary artery disease (CAD) and undergoing both CTA and invasive FFR examinations were consecutively selected from the Beijing Anzhen Hospital between January 1, 2016 to December 30, 2018. FFR obtained during invasive coronary angiography was used as the reference standard. DVFFR was calculated blindly using a DL-based CT-FFR approach that utilized the complete tree structure of the coronary arteries. RESULTS: Three hundred and thirty nine patients (60.5 ±10.0 years and 209 men) and 414 vessels with direct invasive FFR were included in the analysis. At per-vessel level, sensitivity, specificity, accuracy, positive predictive value (PPV) and negative predictive value (NPV) of DVFFR were 94.7%, 88.6%, 90.8%, 82.7%, and 96.7%, respectively. The area under the receiver operating characteristics curve (AUC) was 0.95 for DVFFR and 0.56 for CTA-based assessment with a significant difference (P < 0.0001). At patient level, sensitivity, specificity, accuracy, PPV and NPV of DVFFR were 93.8%, 88.0%, 90.3%, 83.0%, and 95.8%, respectively. The computation for DVFFR was fast with the average time of 22.5 ± 1.9 s. CONCLUSIONS The results demonstrate that DVFFR was able to evaluate lesion hemodynamic significance accurately and effectively with improved diagnostic performance over CTA alone. Coronary artery disease (CAD) is a critical disease in which coronary artery luminal narrowing may result in myocardial ischemia. Early and effective assessment of myocardial ischemia is essential for optimal treatment planning so as to improve the quality of life and reduce medical costs.

Eightly-four novel thioheterocyclic nucleoside derivatives were designed, synthesized, and evaluated for antitumor activity in vitro and in vivo. Most of the compounds inhibited the growth of HCT116 and HeLa cancer cells in vitro, among them 33a and 36b exhibited potent activity against HCT116 cells (IC₅₀ = 0.27 and 0.49 μmol/L, respectively). Both compounds 33a and 36b inhibited cell metastasis, arrested the cell cycle in the G₂/M phase, and induced apoptosis in vitro. Mechanistic studies revealed that 33a and 36b increased ROS levels, led to DNA damage, ER stress, and mitochondrial dysfunction, and inhibited autophagy in HCT116 cells. Biological information analysis, RNA-sequencing, Gene Set Enrichment Analysis (GSEA), drug affinity responsive target stability (DARTS) assay, cellular thermal shift assay (CETSA), and SPR experiments identified that compounds 33a and 36b showed antitumor activity by suppressing the c-MYC pathway. c-MYC silencing assays indicated that c-MYC proteins participated in 33a-mediated anticancer activities in HCT116 cells. More importantly, compound 33a presented favorable pharmacokinetic properties in mice (T _1/2 = 6.8 h) and showed significant antitumor efficacy in vivo without obvious toxicity, showing promising potential for further clinical development.

OBJECTIVE: This study reports the first imported case of Lassa fever (LF) in China. Laboratory detection and molecular epidemiological analysis of the Lassa virus (LASV) from this case offer valuable insights for the prevention and control of LF. METHODS: Samples of cerebrospinal fluid (CSF), blood, urine, saliva, and environmental materials were collected from the patient and their close contacts for LASV nucleotide detection. Whole-genome sequencing was performed on positive samples to analyze the genetic characteristics of the virus. RESULTS: LASV was detected in the patient's CSF, blood, and urine, while all samples from close contacts and the environment tested negative. The virus belongs to the lineage IV strain and shares the highest homology with strains from Sierra Leone. The variability in the glycoprotein complex (GPC) among different strains ranged from 3.9% to 15.1%, higher than previously reported for the seven known lineages. Amino acid mutation analysis revealed multiple mutations within the GPC immunogenic epitopes, increasing strain diversity and potentially impacting immune response. CONCLUSION The case was confirmed through nucleotide detection, with no evidence of secondary transmission or viral spread. The LASV strain identified belongs to lineage IV, with broader GPC variability than previously reported. Mutations in the immune-related sites of GPC may affect immune responses, necessitating heightened vigilance regarding the virus.
Humans ; China/epidemiology* ; Genome, Viral ; Lassa Fever/virology* ; Lassa virus/classification* ; Molecular Epidemiology ; Phylogeny

OBJECTIVE: Recombination events are common and serve as the primary driving force of diverse human adenovirus (HAdV), particularly in children with acute respiratory tract infections (ARIs). Therefore, continual monitoring of these events is essential for effective viral surveillance and control. METHODS: Respiratory specimens were collected from children with ARIs between January 2022 and December 2023. The penton base, hexon, and fiber genes were amplified from HAdV-positive specimens and sequenced to determine the virus type. In cases with inconsistent typing results, genes were cloned into the pGEM-T vector to detect recombination events. Metagenomic next-generation sequencing (mNGS) was performed to characterize the recombinant HAdV genomes. RESULTS: Among 6,771 specimens, 277 (4.09%, 277/6,771) were positvie for HAdV, of which 157 (56.68%, 157/277) were successfully typed, with HAdV-B3 being the dominant type (91.08%, 143/157), and 14 (5.05%, 14/277) exhibited inconsistent typing results, six of which belonged to species B. The penton base genes of these six specimens were classified as HAdV-B7, whereas their hexon and fiber genes were classified as HAdV-B3, resulting in a recombinant genotype designated P7H3F3, which closely resembled HAdV-B114. Additionally, a partial gene encoding L1 52/55 kD was identified, which originated from HAdV-B16. CONCLUSION A novel recombinant, P7H3F3, was identified, containing sequences derived from HAdV-B3 and HAdV-B7, which is similar to HAdV-B114, along with additional sequences from HAdV-B16.
Humans ; Adenoviruses, Human/isolation & purification* ; Respiratory Tract Infections/epidemiology* ; Child, Preschool ; Child ; Recombination, Genetic ; Male ; Beijing/epidemiology* ; Infant ; Female ; Phylogeny ; Adenovirus Infections, Human/epidemiology* ; Acute Disease ; Genome, Viral

OBJECTIVE: To assess the risk of aristolochic acid (AA)-associated cancer in patients with AA nephropathy (AAN). METHODS: A retrospective study was conducted on patients diagnosed with AAN at Peking University First Hospital from January 1997 to December 2014. Long-term surveillance and follow-up data were analyzed to investigate the influence of different factors on the prevalence of cancer. The primary endpoint was the incidence of liver cancer, and the secondary endpoint was the incidence of urinary cancer during 1 year after taking AA-containing medication to 2014. RESULTS: A total of 337 patients diagnosed with AAN were included in this study. From the initiation of taking AA to the termination of follow-up, 39 patients were diagnosed with cancer. No cases of liver cancer were observed throughout the entire follow-up period, with urinary cancer being the predominant type (34/39, 87.17%). Logistic regression analysis showed that age, follow-up period, and diabetes were potential risk factors, however, the dosage of the drug was not significantly associated with urinary cancer. CONCLUSIONS No cases of liver cancer were observed at the end of follow-up. However, a high prevalence of urinary cancer was observed in AAN patients. Establishing a direct causality between AA and HCC is challenging.
Humans ; Retrospective Studies ; Incidence ; Carcinoma, Hepatocellular ; Liver Neoplasms/epidemiology* ; Kidney Diseases/chemically induced* ; Aristolochic Acids/adverse effects*