Cytomegalovirus (CMV) is a significant concern for patients with allogeneic hematopoietic cell transplantation (alloHCT). CMV management differs between institutions due to the lack of local guidelines. Here, we describe a case of refractory/resistant CMV infection treated using our institution's CMV management protocol. A 59-year-old woman who underwent allo-HCT was treated for CMV reactivation. Despite 3 months of valganciclovir administration, serum CMV level surged. CMV gene mutation test revealed a ganciclovir-resistant A594V mutation in the UL97 gene.Treatment was switched to foscarnet until the drug became unavailable nationwide. During the foscarnet shortage, cidofovir was used, leading to a decline in CMV levels when foscarnet was reintroduced and used for 2 months.Following allo-HCT, CMV prophylaxis with letermovir is crucial to prevent reactivation in seropositive recipients.CMV titers should be monitored frequently after allo-HCT. The cutoff value for preemptive therapy varies across institutions, with ganciclovir/valganciclovir usually administered as first-line therapy. Maribavir is an option in cases of ganciclovir/valganciclovir resistance or intolerance. CMV gene mutations should be examined in patients with suspected resistance after 2 weeks of appropriate treatment. This case was discussed at the Clinical Grand Round of the Annual Conference of the Korean Society of Infectious Diseases on November 2, 2023.

Vertical positioning of dental implants relative to the cementoenamel junction (CEJ) of the adjacent teeth is essential for maintaining peri-implant bone stability and long-term success. This retrospective study evaluated how the vertical distance from the CEJ affects peri-implant bone loss in patients who had implants positioned at various distances from the CEJ. Bone loss was evaluated using panoramic radiographs over a 2-year follow-up period, with additional consideration of factors such as smoking and diabetes. Implants positioned >4 mm away from the CEJ exhibited a higher mean bone loss; however, this difference was not significant. Smoking significantly influenced bone loss, whereas diabetes and jaw location had no significant effect. These results highlight the potential influence of vertical implant positioning on peri-implant bone health and highlight the importance of appropriate maintenance care to reduce bone loss and ensure long-term implant survival.

Cytomegalovirus (CMV) is a significant concern for patients with allogeneic hematopoietic cell transplantation (alloHCT). CMV management differs between institutions due to the lack of local guidelines. Here, we describe a case of refractory/resistant CMV infection treated using our institution's CMV management protocol. A 59-year-old woman who underwent allo-HCT was treated for CMV reactivation. Despite 3 months of valganciclovir administration, serum CMV level surged. CMV gene mutation test revealed a ganciclovir-resistant A594V mutation in the UL97 gene.Treatment was switched to foscarnet until the drug became unavailable nationwide. During the foscarnet shortage, cidofovir was used, leading to a decline in CMV levels when foscarnet was reintroduced and used for 2 months.Following allo-HCT, CMV prophylaxis with letermovir is crucial to prevent reactivation in seropositive recipients.CMV titers should be monitored frequently after allo-HCT. The cutoff value for preemptive therapy varies across institutions, with ganciclovir/valganciclovir usually administered as first-line therapy. Maribavir is an option in cases of ganciclovir/valganciclovir resistance or intolerance. CMV gene mutations should be examined in patients with suspected resistance after 2 weeks of appropriate treatment. This case was discussed at the Clinical Grand Round of the Annual Conference of the Korean Society of Infectious Diseases on November 2, 2023.

Cytomegalovirus (CMV) is a significant concern for patients with allogeneic hematopoietic cell transplantation (alloHCT). CMV management differs between institutions due to the lack of local guidelines. Here, we describe a case of refractory/resistant CMV infection treated using our institution's CMV management protocol. A 59-year-old woman who underwent allo-HCT was treated for CMV reactivation. Despite 3 months of valganciclovir administration, serum CMV level surged. CMV gene mutation test revealed a ganciclovir-resistant A594V mutation in the UL97 gene.Treatment was switched to foscarnet until the drug became unavailable nationwide. During the foscarnet shortage, cidofovir was used, leading to a decline in CMV levels when foscarnet was reintroduced and used for 2 months.Following allo-HCT, CMV prophylaxis with letermovir is crucial to prevent reactivation in seropositive recipients.CMV titers should be monitored frequently after allo-HCT. The cutoff value for preemptive therapy varies across institutions, with ganciclovir/valganciclovir usually administered as first-line therapy. Maribavir is an option in cases of ganciclovir/valganciclovir resistance or intolerance. CMV gene mutations should be examined in patients with suspected resistance after 2 weeks of appropriate treatment. This case was discussed at the Clinical Grand Round of the Annual Conference of the Korean Society of Infectious Diseases on November 2, 2023.

Background: This study investigates the relationship between changes in physical activity levels and risk of metabolic syndrome. Methods: This study examined 1,686 adults aged 40 to 69 years from a community-based cohort study with complete 1st to 4th follow-up data between 2011 and 2020. Changes in physical activity were evaluated through baseline and follow-up surveys using physical activity questionnaires. Metabolic syndrome was diagnosed according to the International Diabetes Federation criteria. A survival analysis was conducted using a multivariate extended Cox regression model with a significance level set at P<0.05. Results: Participants were divided into groups according to physical activity levels. The newly inactive group (vigorous physical activity ≤150 minutes at first follow-up) had a 36% increase in the hazard ratio (HR) for metabolic syndrome compared with the consistently inactive group (≤150 minutes at both baseline and first followup) (HR, 1.36; 95% confidence interval [CI], 1.04 to 1.79). The newly active group (walking ≤420 minutes per week at baseline and >420 minutes per week at first follow-up) had a 25% decrease in the HR for metabolic syndrome compared with the consistently inactive group (walking ≤420 minutes per week at both baseline and first follow-up) (HR, 0.75; 95% CI, 0.57 to 0.98). Conclusion Changes in physical activity levels are associated with risk of metabolic syndrome. These results provide important insights for future investigations into the link between physical activity changes and disease occurrence.

Background: Healthcare-associated infections (HAI) caused by multidrug-resistant organisms have emerged as a significant global issue, posing substantial challenges to healthcare systems. Low- and intermediate-level disinfectants are extensively utilized for cleaning and disinfecting surfaces in hospitals to mitigate environmental transmission of HAI. Therefore, the need for more effective and environmentally safe disinfectants is increasing.This study aimed to assess the effect of antimicrobial wipes used for surface cleaning and disinfection in healthcare environments. Materials and Methods: A microbe library comprising 188 bacterial and fungal isolates, including multidrug-resistant strains, was established and used to evaluate the antimicrobial effect of three types of antimicrobial wipes:A (didecyldimethylammonium chloride [DDAC] 0.31% and 3-(trimethoxysilyl)-propyldimethyloctadecyl ammonium chloride [Si-QAC] 0.45%); B (benzalkonium chloride [BAK] 0.63%); and C (DDAC 0.5% and BAK 0.9%). The antimicrobial effect of the wipes was assessed and compared in three assays: rapid bactericidal effect assay of the three wipes, minimum inhibitory concentration (MIC) assay of DDAC and BAK, and a time-kill assay of the DDAC and Si-QAC combination. Results: The rapid antimicrobial effect evaluation showed that both wipes A and C, which contain a combination of two quaternary ammonium compounds (QACs), exhibited similar antimicrobial effect (P=0.8234). Antimicrobial wipe A demonstrated better effect against Gram-positive bacteria and fungi than wipe C (P <0.05). The antimicrobial efficacy of the A wipe against Mycobacterium strains was superior to that of both the B and C wipes. Moreover, DDAC exhibited MIC50 values that were 2 to 3-fold lower than those of BAK for Gram-negative bacteria and fungi.The time-kill assay results for the DDAC and Si-QAC combination exhibited a growth reduction of >3 logs for Staphylococcus aureus and Enterococcus faecium, whereas approximately 2 logs of reduction was observed for Escherichia coli and Pseudomonas aeruginosa at 3 hour. Conclusion The results suggest that antimicrobial wipes containing relatively lower concentrations of QAC (wipe A) achieve similar rapid bactericidal effect as that of those with higher concentrations (wipe C). For Gram-negative bacteria, including multidrug-resistant strains and fungal isolates, DDAC presented lower MICs compared with BAK. Furthermore, the combination therapy with DDAC and Si-QAC demonstrated enhanced efficacy compared to treatment with either agent alone, except in the case of Klebsiella strains. Further research is needed to develop antimicrobial wipes that minimize the environmental impact while ensuring effective disinfection.

Background: Healthcare-associated infections (HAI) caused by multidrug-resistant organisms have emerged as a significant global issue, posing substantial challenges to healthcare systems. Low- and intermediate-level disinfectants are extensively utilized for cleaning and disinfecting surfaces in hospitals to mitigate environmental transmission of HAI. Therefore, the need for more effective and environmentally safe disinfectants is increasing.This study aimed to assess the effect of antimicrobial wipes used for surface cleaning and disinfection in healthcare environments. Materials and Methods: A microbe library comprising 188 bacterial and fungal isolates, including multidrug-resistant strains, was established and used to evaluate the antimicrobial effect of three types of antimicrobial wipes:A (didecyldimethylammonium chloride [DDAC] 0.31% and 3-(trimethoxysilyl)-propyldimethyloctadecyl ammonium chloride [Si-QAC] 0.45%); B (benzalkonium chloride [BAK] 0.63%); and C (DDAC 0.5% and BAK 0.9%). The antimicrobial effect of the wipes was assessed and compared in three assays: rapid bactericidal effect assay of the three wipes, minimum inhibitory concentration (MIC) assay of DDAC and BAK, and a time-kill assay of the DDAC and Si-QAC combination. Results: The rapid antimicrobial effect evaluation showed that both wipes A and C, which contain a combination of two quaternary ammonium compounds (QACs), exhibited similar antimicrobial effect (P=0.8234). Antimicrobial wipe A demonstrated better effect against Gram-positive bacteria and fungi than wipe C (P <0.05). The antimicrobial efficacy of the A wipe against Mycobacterium strains was superior to that of both the B and C wipes. Moreover, DDAC exhibited MIC50 values that were 2 to 3-fold lower than those of BAK for Gram-negative bacteria and fungi.The time-kill assay results for the DDAC and Si-QAC combination exhibited a growth reduction of >3 logs for Staphylococcus aureus and Enterococcus faecium, whereas approximately 2 logs of reduction was observed for Escherichia coli and Pseudomonas aeruginosa at 3 hour. Conclusion The results suggest that antimicrobial wipes containing relatively lower concentrations of QAC (wipe A) achieve similar rapid bactericidal effect as that of those with higher concentrations (wipe C). For Gram-negative bacteria, including multidrug-resistant strains and fungal isolates, DDAC presented lower MICs compared with BAK. Furthermore, the combination therapy with DDAC and Si-QAC demonstrated enhanced efficacy compared to treatment with either agent alone, except in the case of Klebsiella strains. Further research is needed to develop antimicrobial wipes that minimize the environmental impact while ensuring effective disinfection.

Background: This study investigates the relationship between changes in physical activity levels and risk of metabolic syndrome. Methods: This study examined 1,686 adults aged 40 to 69 years from a community-based cohort study with complete 1st to 4th follow-up data between 2011 and 2020. Changes in physical activity were evaluated through baseline and follow-up surveys using physical activity questionnaires. Metabolic syndrome was diagnosed according to the International Diabetes Federation criteria. A survival analysis was conducted using a multivariate extended Cox regression model with a significance level set at P<0.05. Results: Participants were divided into groups according to physical activity levels. The newly inactive group (vigorous physical activity ≤150 minutes at first follow-up) had a 36% increase in the hazard ratio (HR) for metabolic syndrome compared with the consistently inactive group (≤150 minutes at both baseline and first followup) (HR, 1.36; 95% confidence interval [CI], 1.04 to 1.79). The newly active group (walking ≤420 minutes per week at baseline and >420 minutes per week at first follow-up) had a 25% decrease in the HR for metabolic syndrome compared with the consistently inactive group (walking ≤420 minutes per week at both baseline and first follow-up) (HR, 0.75; 95% CI, 0.57 to 0.98). Conclusion Changes in physical activity levels are associated with risk of metabolic syndrome. These results provide important insights for future investigations into the link between physical activity changes and disease occurrence.

Background: Healthcare-associated infections (HAI) caused by multidrug-resistant organisms have emerged as a significant global issue, posing substantial challenges to healthcare systems. Low- and intermediate-level disinfectants are extensively utilized for cleaning and disinfecting surfaces in hospitals to mitigate environmental transmission of HAI. Therefore, the need for more effective and environmentally safe disinfectants is increasing.This study aimed to assess the effect of antimicrobial wipes used for surface cleaning and disinfection in healthcare environments. Materials and Methods: A microbe library comprising 188 bacterial and fungal isolates, including multidrug-resistant strains, was established and used to evaluate the antimicrobial effect of three types of antimicrobial wipes:A (didecyldimethylammonium chloride [DDAC] 0.31% and 3-(trimethoxysilyl)-propyldimethyloctadecyl ammonium chloride [Si-QAC] 0.45%); B (benzalkonium chloride [BAK] 0.63%); and C (DDAC 0.5% and BAK 0.9%). The antimicrobial effect of the wipes was assessed and compared in three assays: rapid bactericidal effect assay of the three wipes, minimum inhibitory concentration (MIC) assay of DDAC and BAK, and a time-kill assay of the DDAC and Si-QAC combination. Results: The rapid antimicrobial effect evaluation showed that both wipes A and C, which contain a combination of two quaternary ammonium compounds (QACs), exhibited similar antimicrobial effect (P=0.8234). Antimicrobial wipe A demonstrated better effect against Gram-positive bacteria and fungi than wipe C (P <0.05). The antimicrobial efficacy of the A wipe against Mycobacterium strains was superior to that of both the B and C wipes. Moreover, DDAC exhibited MIC50 values that were 2 to 3-fold lower than those of BAK for Gram-negative bacteria and fungi.The time-kill assay results for the DDAC and Si-QAC combination exhibited a growth reduction of >3 logs for Staphylococcus aureus and Enterococcus faecium, whereas approximately 2 logs of reduction was observed for Escherichia coli and Pseudomonas aeruginosa at 3 hour. Conclusion The results suggest that antimicrobial wipes containing relatively lower concentrations of QAC (wipe A) achieve similar rapid bactericidal effect as that of those with higher concentrations (wipe C). For Gram-negative bacteria, including multidrug-resistant strains and fungal isolates, DDAC presented lower MICs compared with BAK. Furthermore, the combination therapy with DDAC and Si-QAC demonstrated enhanced efficacy compared to treatment with either agent alone, except in the case of Klebsiella strains. Further research is needed to develop antimicrobial wipes that minimize the environmental impact while ensuring effective disinfection.