Objective To calculate the absorbed doses and conversion coefficients of various organs in humans after oral administration of urea-¹⁴C, and to provide a convenient method for evaluating the internal radiation dose caused by ingestion of urea-¹⁴C in Chinese population. Methods The Chinese reference human voxel model was imported into the FLUKA software to simulate the absorbed doses to organs under internal exposure to ¹⁴C, and to obtain the dose conversion coefficients for oral administration of urea-¹⁴C. Results The absorbed dose conversion coefficients for the stomach, colon, bladder, heart, and muscles were 0.029, 0.029, 0.32 (0.24), 0.028, and 0.029 mGy/MBq in negative cases, and 0.079, 0.078, 0.18 (0.15), 0.076, and 0.080 mGy/MBq in positive cases. The committed effective dose coefficients were 0.041 (0.037) mSv/MBq in negative cases and 0.082 (0.081) mSv/MBq in positive cases. Conclusion The dose conversion coefficients obtained in this study can provide important parameters for evaluating the absorbed dose to Chinese population after oral administration of urea-¹⁴C.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective:To explore the clinical efficacy of free superficial circumflex iliac artery perforator flap (SCIAPF) in reconstruction of soft tissue defects of hand and foot in children.Methods:From August 2021 to August 2023, free SCIAPFs were used to reconstruct soft tissue defects of hands and feet in 8 children at the Department of Hand and Foot Surgery, Zhoukou Huaihai Hospital. There were 6 boys and 2 girls aged between 2 and 7 years old. The sites of soft tissue defect were: 1 of metacarpophalangeal joint in the functional area of left thumb, 2 of dorsal right hand, 1 of dorsal left foot, 2 of medial malleolus of right foot, and 2 of right forefoot, and all were accompanied with tendon and bone exposure. The size of soft tissue defects ranged from 2.5 cm×3.0 cm to 6.0 cm×3.5 cm. After emergency debridement, the children received flap transfers, the flaps sized from 3.0 cm×3.5 cm to 7.0 cm×4.0 cm. Donor sites were closed by running intradermal suture. All children were included in the scheduled postoperative follow-up by visit of outpatient clinic, WeChat interviews and home visits to observe the appearance, colour, texture and sensation of the flaps, the functional recovery of the affected hands and feet, as well as the healing of donor sites.Results:After surgery, all 8 flaps survived beside 1 had a partial necrosis at the edge and healed with a scab after dressing change. Flap donor sites healed in one stage. Scheduled postoperative follow-up lasted from 7 to 22 months, with an average of 10 months. The flaps presented a slightly bloated appearance, soft texture with a restored protective sensation and satisfactory functional recovery of hands and feet. Linear scars were left at the donor sites. According to the Evaluation Trial Standards of Upper Limb Partial Functional of Hand Surgery of Chinese Medical Association, 1 child was of excellent and 2 children of good in hand function of the 3 children with hand injury. The Maryland Foot Score revealed 3 children were of excellent and 2 of good in foot function of the 5 children with foot injury.Conclusion:Free SCIAPF is an ideal option for reconstruction of soft tissue defects of hand and foot in children, with concealed donor site, convenient flap harvesting, fewer complications and satisfactory reconstructive effect.

Objective:To investigate the effects of birth intervals on maternal and infant outcomes in pregnant women with gestational diabetes mellitus (GDM).Methods:This retrospective study recruited 445 pregnant women with GDM who received prenatal examinations and delivered in Peking University First Hospital-Ningxia Women Children's Hospital from January 2020 to December 2021. Based on the birth interval classification standard recommended by WHO and the American College of Obstetricians and Gynecologists, these subjects were divided into three groups: shorter group (<18 months, n=69), normal group (18-59 months, n=213) and longer group (≥60 months, n=163). Analysis of variance, Chi-square test, and multivariate logistic regression model were used for statistical analysis. Results:There were statistically significant differences in the maternal age at this and previous pregnancy [(30.6±4.1), (30.8±3.8) vs (32.7±3.7) years; (22.7±2.4), (26.3±2.9) vs (29.9±4.1) years] and the incidence of oligohydramnios [10.1% (7/69), 1.9% (4/213) vs 3.1% (5/163)] and preterm birth [14.5% (10/69), 5.2% (11/213) vs 1.8% (3/163)] between the shorter, normal, and longer groups (all P<0.05). After adjusting for confounding factors in the present pregnancy, the risks of oligohydramnios, preterm birth, and low birth weight increased in the shorter group [ OR (95% CI): 4.73 (1.75-12.85), 5.54 (1.37-22.42) and 9.54 (3.05-29.82), all P<0.05] and so did the risk of postpartum hemorrhage in the longer group [ OR (95% CI): 4.45 (1.72-11.49), P<0.05]. Conclusions:Both longer and shorter birth intervals can affect maternal and infant outcomes of GDM patients. Postpartum healthcare should be strengthened for GDM patients who desire more children to help them maintain an appropriate birth interval, thus promoting maternal and infant health.

The fall armyworm (FAW), Spodoptera frugiperda, is a destructive pest native to America and has recently become an invasive insect pest in China. Because of its rapid spread and great risks in China, understanding of FAW genetic background and pesticide resistance is urgent and essential to develop effective management strategies. Here, we assembled a chromosome-level genome of a male FAW (SFynMstLFR) and compared re-sequencing results of the populations from America, Africa, and China. Strain identification of 163 individuals collected from America, Africa and China showed that both C and R strains were found in the American populations, while only C strain was found in the Chinese and African populations. Moreover, population genomics analysis showed that populations from Africa and China have close relationship with significantly genetic differentiation from American populations. Taken together, FAWs invaded into China were most likely originated from Africa. Comparative genomics analysis displayed that the cytochrome p450 gene family is extremely expanded to 425 members in FAW, of which 283 genes are specific to FAW. Treatments of Chinese populations with twenty-three pesticides showed the variant patterns of transcriptome profiles, and several detoxification genes such as AOX, UGT and GST specially responded to the pesticides. These findings will be useful in developing effective strategies for management of FAW in China and other invaded areas.
Animals ; China ; Genomics ; Humans ; Male ; Pesticides ; Spodoptera/genetics* ; Transcriptome

In recent years, immune checkpoint inhibitors are a milestone in the treatment of lung cancer. There are many kinds of immune checkpoints, which are closely related to the efficacy and drug resis-tance of immunotherapy, including programmed death-1 (PD-1), programmed death ligand-1 (PD-L1), cytotoxic T-lymphocyte antigen 4 (CTLA-4), killer cell immunoglobulin-like receptor (KIR), T cell immunoglobulin and ITIM domain (TIGIT), T-cell immunoglobulin and mucin domain-containing protein 3 (TIM-3), etc. PD-1/PD-L1 inhibitors have been approved by China National Medical Products Administration and U. S. Food and Drug Administration for the first-line treatment of lung cancer, which can improve overall survival and progression-free survival of patients. The double immunotherapies of CTLA-4 inhibitors or TIGIT inhibitors combined with PD-1/PD-L1 inhibitors also achieve good results, however, more serious adverse events may occur.The KIR and TIM-3 targets are closely related to the drug resistance of immunotherapy.

Ambystoma mexicanum/immunology* ; Amputation ; Animals ; Biomarkers/metabolism* ; Blastomeres/immunology* ; Cell Lineage/immunology* ; Connective Tissue Cells/immunology* ; Epithelial Cells/immunology* ; Forelimb ; Gene Expression ; High-Throughput Nucleotide Sequencing ; Humans ; Immunity ; Peroxiredoxins/immunology* ; Regeneration/immunology* ; Regenerative Medicine/methods* ; Single-Cell Analysis/methods*

Genome reannotation aims for complete and accurate characterization of gene models and thus is of critical significance for in-depth exploration of gene function. Although the availability of massive RNA-seq data provides great opportunities for gene model refinement, few efforts have been made to adopt these precious data in rice genome reannotation. Here we reannotate the rice (Oryza sativa L. ssp. japonica) genome based on integration of large-scale RNA-seq data and release a new annotation system IC4R-2.0. In general, IC4R-2.0 significantly improves the completeness of gene structure, identifies a number of novel genes, and integrates a variety of functional annota-tions. Furthermore, long non-coding RNAs (lncRNAs) and circular RNAs (circRNAs) are system-atically characterized in the rice genome. Performance evaluation shows that compared to previous annotation systems, IC4R-2.0 achieves higher integrity and quality, primarily attributable to mas-sive RNA-seq data applied in genome annotation. Consequently, we incorporate the improvedannotations into the Information Commons for Rice (IC4R), a database integrating multiple omics data of rice, and accordingly update IC4R by providing more user-friendly web interfaces and implementing a series of practical online tools. Together, the updated IC4R, which is equipped with the improved annotations, bears great promise for comparative and functional genomic studies in rice and other monocotyledonous species. The IC4R-2.0 annotation system and related resources are freely accessible at http://ic4r.org/.

Objective: To study the antiseptic effect of compound lysostaphin disinfectant and its preventive effect on infection of artificial dermis after graft on full-thickness skin defect wound in rats. Methods: (1) Each one standard strain of Klebsiella pneumoniae, Acinetobacter baumannii, and Staphylococcus aureus were selected. Each 20 clinical strains of Klebsiella pneumoniae, Acinetobacter baumannii, and Staphylococcus aureus were collected from those isolated from wound exudates of burn patients hospitalized in our wards from January 2014 to December 2016 according to the random number table. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of compound lysostaphin disinfectant to above-mentioned strains were detected. The experiment was repeated 3 times. Compared with the corresponding standard strain, the clinical strain with higher MIC and/or MBC was considered as having decreased sensitivity to the disinfectant. The percentage of strains of each of the three kinds of bacteria with decreased sensitivity was calculated. (2) Artificial dermis pieces were soaked in compound lysostaphin disinfectant for 5 min, 1 h, 2 h, and 4 h, respectively, with 21 pieces at each time point. After standing for 0 (immediately), 12, 24, 36, 48, 60, 72 h (with 3 pieces at each time point), respectively, the diameters of their inhibition zones to standard strains of Klebsiella pneumoniae, Acinetobacter baumannii, and Staphylococcus aureus were measured. The experiment was repeated 3 times. The shortest soaking time corresponding to the longest standing time, after which the disinfectant-soaked artificial dermis could form an effective inhibition zone (with diameter more than 7 mm), was the sufficient soaking time of the disinfectant to the artificial dermis. (3) Forty Sprague-Dawley rats were divided into post injury day (PID) 3, 7, 14, and 21 sampling groups according to the random number table, with 10 rats in each group. A full-thickness skin defect wound with a diameter of 20 mm was made on both sides of the spine on the back of each rat. Immediately after injury, the artificial dermis without any treatment was grafted on the wound on left side of the spine (hereinafter referred to as control wound), while the sufficiently soaked artificial dermis with compound lysostaphin disinfectant was grafted on the wound on right side of the spine (hereinafter referred to as disinfectant wound). On PID 3, 7, 14, and 21, the gross condition of wounds of all the surviving rats was observed, and the new infection rates of control wounds and disinfectant wounds were calculated. Then, the rats in the sampling group with corresponding time were killed, and the full-thickness wound tissue containing artificial dermis was collected for quantitative analysis of bacteria. Bacteria content of the uninfected control wounds and that of the uninfected disinfectant wounds were compared. Data were processed with chi-square test and Wilcoxon rank sum test. Results: (1) The MIC of compound lysostaphin disinfectant to standard strains of Staphylococcus aureus, Klebsiella pneumoniae, and Acinetobacter baumannii were 1/32, 1/32, and 1/512 of the original concentration of the disinfectant, respectively, and the MBC were 1/32, 1/16, and 1/512 of the original concentration of the disinfectant, respectively. The percentages of clinical strains of Klebsiella pneumoniae, Acinetobacter baumannii and Staphylococcus aureus with decreased sensitivity to compound lysostaphin disinfectant were 15% (3/20), 20% (4/20), and 10% (2/20), respectively. (2) After being soaked in compound lysostaphin disinfectant for 2 and 4 h, the longest standing time, after which the artificial dermis could form an effective inhibition zone against Klebsiella pneumoniae, Acinetobacter baumannii, and Staphylococcus aureus, were 24, 36, and 48 h respectively, longer than 12, 24, and 24 h of soaking for 5 min and 24, 24, and 36 h of soaking for 1 h. The sufficient soaking time of compound lysostaphin disinfectant to artificial dermis was 2 h. (3) On PID 3, no infection symptom was observed in all the wounds, and so both the new infection rate of control wounds and that of disinfectant wounds were 0. The artificial dermis was transparent but not well connected with the wound. On PID 7, the new infection rate of control wounds was 20.00% (6/30), which was obviously higher than 3.33% (1/30) of disinfectant wounds, χ²=4.043, P<0.05. On the infected wound, a large amount of purulent exudates were observed, and the artificial dermis was not connected with the wound and degraded partially. On the uninfected wound, artificial dermis was transparent and had a partial connection with the wound. On PID 14 and 21, no new infected wound was observed, and so both the new infection rate of control wounds and that of disinfectant wounds were 0. There was no obvious improvement on the infected wounds. The collagen layers of artificial dermis in the uninfected wound established a good connection with the wound and were separating from the silica gel layer gradually. Infection occurred in 2, 3, 1 control wound (s) in PID 7, 14, and 21 sampling groups, respectively, and in 1 disinfectant wound in PID 14 sampling group. The bacteria content of the infected wounds tissue was 0.79×10⁶ to 7.22×10⁹ colony-forming unit (CFU)/g. The bacteria content of uninfected control wounds tissue in PID 3, 7, and 14 sampling groups were (3.43±1.88)×10^2, (2.37±0.43)×10^3, and (8.40±1.03)×10³ CFU/g, respectively, which were significantly higher than (0.33±0.12)×10^2, (0.43±0.17)×10^3, (2.16±0.52)×10³ CFU/g of uninfected disinfectant wounds tissue (Z=-3.780, -3.554, -3.334, P<0.05). The bacteria content of uninfected control wounds tissue and that of uninfected disinfectant wounds tissue in PID 21 sampling group were similar (Z=-0.490, P>0.05). Conclusions Compound lysostaphin disinfectant has quite strong antibacterial ability against Klebsiella pneumoniae, Acinetobacter baumannii, and Staphylococcus aureus. Clinical strains of the three kinds of bacteria were highly sensitive to compound lysostaphin disinfectant. Saturation of absorption of compound lysostaphin disinfectant achieves in artificial dermis after 2 hours′ soaking. After 24, 36, and 48 hours′ standing, the soaked artificial dermis still has the antibacterial effect on Klebsiella pneumoniae, Acinetobacter baumannii, and Staphylococcus aureus, respectively. The infection rate and the bacteria content of full-thickness skin defect wound in rats are all decreased when grafted with soaked artificial dermis.