Objective To carry out rigid-body inverse dynamics modelling and analysis of a self-designed 6RSS parallel bio-inspired masticatory robot.Methods Firstly,the functions of kinematic variables including translational/rotational velocities and accelerations were derived for rigid-body inverse dynamics modelling.Secondly,the rigid-body inverse dynamics model was established with the Newton-Euler's law.Finally,the chewing motion trajectories of the oral health volunteers were tracked and numerical calculations were carried out in the case where the robot was subjected to a chewing reaction force.Results Numerical calculations showed that the driving torque and the constraint force of the robot peaked when the chewing reaction force was at its maximum.Conclusion The external force has a large impact on the inverse dynamics of the robot,and theoretical references are provided for the motion control and optimal design of the robot.[Chinese Medical Equipment Journal,2024,45(3):16-22]

Objective To investigate the biomechanical properties of a novel sacroiliac lag screw with a spiral blade.Methods Percutaneous sacroiliac lag screws were used as the controls.Polyurethane material was used to simulate the trabecular bone,and the pullout resistance performance was tested on an Instron mechanical testing machine.Subsequently,pelvic specimens were utilized to analyze the static stiffness and dynamic stability of the novel sacroiliac lag screw in repairing sacroiliac joint injuries under normal standing conditions,with normal pelvis,single-sided sacroiliac joint injury pelvis,percutaneous sacroiliac lag screw-single screw repair,and percutaneous sacroiliac lag screw-double screw repair as controls.Results The damage to the polyurethane material after screw extraction was smaller in the novel sacroiliac lag screw group.The average effective holding displacement of the novel sacroiliac lag screw was significantly greater than that of the percutaneous sacroiliac lag screw(P＜0.05).However,the maximum resistance to the pullout force for the percutaneous sacroiliac lag screw was significantly higher than that for the novel sacroiliac lag screw(P＜0.05).The stiffness after repair of sacroiliac joint injuries was significantly higher when using a single sacroiliac lag screw than when using two percutaneous sacroiliac lag screws(P＜0.05).The displacement amplitude was the highest in the sacroiliac joint injury group,followed by that in the normal group.The displacement amplitudes in the other groups were similar;however,the differences were statistically significant(P＜0.05).The dynamic stability of the sacroiliac lag screw repair group was the best,slightly better than that of the percutaneous sacroiliac lag screw-double screw repair group,and the dynamic stability of the sacroiliac joint injury group was the worst.The novel sacroiliac lag screw effectively repaired the sacroiliac joint injuries.Conclusions The novel sacroiliac lag screw can effectively hold the trabecular bone and has practical clinical utility.

Objective To explore the postmortem diffusion rule of Aconitum alkaloids and their metabo-lites in poisoned rabbits,and to provide a reference for identifying the antemortem poisoning or post-mortem poisoning of Aconitum alkaloids.Methods Twenty-four rabbits were sacrificed by tracheal clamps.After 1 hour,the rabbits were administered with aconitine LD50 in decocting aconite root powder by intragastric administration.Then,they were placed supine and stored at 25℃.The biological samples from 3 randomly selected rabbits were collected including heart blood,peripheral blood,urine,heart,liver,spleen,lung and kidney tissues at 0 h,4 h,8 h,12 h,24 h,48 h,72 h and 96 h after intragastric administration,respectively.Aconitum alkaloids and their metabolites in the biological samples were ana-lyzed by high performance liquid chromatography-tandem mass spectrometry(HPLC-MS/MS).Results At 4 h after intragastric administration,Aconitum alkaloids and their metabolites could be detected in heart blood,peripheral blood and major organs,and the contents of them changed dynamically with the preservation time.The contents of Aconitum alkaloids and their metabolites were higher in the spleen,liver and lung,especially in the spleen which was closer to the stomach.The average mass fraction of benzoylmesaconine metabolized in rabbit spleen was the highest at 48 h after intragastric administration.In contrast,the contents of Aconitum alkaloids and their metabolites in kidney were all lower.Aconi-tum alkaloids and their metabolites were not detected in urine.Conclusion Aconitum alkaloids and their metabolites have postmortem diffusion in poisoned rabbits,diffusing from high-content organs(stomach)to other major organs and tissues as well as the heart blood.The main mechanism is the dispersion along the concentration gradient,while urine is not affected by postmortem diffusion,which can be used as the basis for the identification of antemortem and postmortem Aconitum alkaloids poisoning.

Objective To analyze the application value of cervical vascular color Doppler ultrasound com-bined with serum microRNA-222-3p(miR-222-3p)and microRNA-206(miR-206)in the diagnosis of carotid artery stenosis in patients with cerebral infarction.Methods A total of 90 patients with cerebral infarction ad-mitted to this hospital from July 2018 to July 2022 were selected as the study group,and were divided into mild stenosis group(29 cases),moderate stenosis group(35 cases),and severe stenosis group(26 cases)ac-cording to the degree of carotid artery stenosis.In addition,96 healthy people who underwent physical exami-nation in the hospital were selected as the control group.Real-time fluorescence quantitative PCR was used to detect the levels of serum miR-222-3p and miR-206 in each group.All patients with cerebral infarction under-went cervical vascular color Doppler ultrasound examination,and the clinical data of patients with different de-grees of stenosis were analyzed.Multivariate Logistic regression was used to analyze the factors affecting the degree of carotid artery stenosis in patients with cerebral infarction.The receiver operating characteristic(ROC)curve was used to evaluate the diagnostic value of carotid ultrasound indicators,serum miR-222-3p and miR-206 levels for the degree of carotid artery stenosis in patients with cerebral infarction.Results Compared with the control group,the study group had a significant increase in the serum level of miR-222-3p and a sig-nificant reduction in the serum level of miR-206(P＜0.05).Compared with the mild stenosis group,the peak systolic velocity(PSV),end diastolic volume(EDV)and serum miR-222-3p level were increased,and the ser-um miR-206 level was decreased in the moderate stenosis group and the severe stenosis group(P＜0.05).Compared with moderate stenosis group,EVD,PSV and serum miR-222-3p levels were significantly in-creased,and miR-206 level was decreased in severe stenosis group(P＜0.05).EVD,PSV,serum miR-222-3p level were risk factors for carotid artery stenosis in patients with cerebral infarction,and serum miR-206 level was a protective factor for carotid artery stenosis in patients with cerebral infarction(P＜0.05).The area un-der the curve of EVD,PSV combined with serum miR-222-3p and miR-206 in diagnosing the degree of carotid artery stenosis in patients with cerebral infarction was 0.991,and the sensitivity and specificity were 98.36％and 93.10％,respectively.It was better than that of EVD,PSV,serum miR-222-3p,and miR-206 alone(Zcombination-EVD=2.927,P=0.003,Z combination-PSV=2.834,P=0.005,Zcombination-miR-222-3p=3.300,P=0.001,Zcombination-miR-206=3.730,P＜0.001).Conclusion Cervical vascular color Doppler ultrasound combined with ser-um miR-222-3p and miR-206 has application value in the diagnosis of carotid artery stenosis in patients with cerebral infarction.

BACKGROUND:For dislocation of acromioclavicular joint induced by coracoclavicular ligament fracture,single EndoButton Plate reconstruction and double EndoButton Plates reconstruction are common repair methods.Further study on the stress distribution and fracture risk of the two repair methods is of great significance. OBJECTIVE:To study the biomechanical properties of the coracoclavicular ligament,and compare the fixation effect,stress distribution and failure mode of single and double EndoButton Plates reconstruction. METHODS:(1)Finite element simulation analysis:Mimics,Wrap and SolidWorks were used to establish normal coracoclavicular ligament,single EndoButton Plate reconstruction and double EndoButton Plates reconstruction.Ansys software was used to analyze the stress and deformation of the scapula and clavicle of each model under vertical load.(2)Sample experiment:Fifteen intact scapular-clavicle specimens were randomly grouped into five groups,with three specimens in each group.In group A,the acromioclavicular ligament was severed and the coracoclavicular ligament remained intact.In group B,acromioclavicular ligaments and trapeoid ligaments were severed,leaving intact conical ligaments.In group C,acromioclavicular ligaments and conical ligaments were cut off,and the intact traprex ligaments were retained.In group D,acromioclavicular and coracoclavicular ligaments were severed,and coracoclavicular ligaments were repaired by single EndoButton Plate reconstruction.In group E,acromioclavicular and coracoclavicular ligaments were severed,and the coracoclavicular ligaments were repaired by double EndoButton Plates reconstruction.The mechanical experiment was carried out by a mechanical testing machine to analyze the biomechanical status,stress distribution and failure patterns of the scapular-clavicle and clavicle. RESULTS AND CONCLUSION:(1)Finite element simulation analysis:The average stress of coracoclavicular ligament attached specimens was the lowest,and the risk of coracoclavicular fracture was less than that of single and double EndoButton Plates reconstruction.The mean stress of the coracoid process was similar in single and double EndoButton Plates reconstruction,and the fracture risk was similar.(2)Sample experiment:In groups A,B,C,D and E,the stiffness of specimens was(26.4±3.5),(19.8±2.8),(21.3±3.2),(57.7±4.1),and(46.2±2.8)N/mm,respectively;the ultimate loads were(545.5±53.7),(360.1±42.1),(250.9±44.4),(643.5±39.1),and(511.9±31.7)N,respectively;global stiffness in groups D and E was higher than that in group A(P=0.000 06,0.000 3);ultimate load in group D was higher than that in group A(P<0.05);the ultimate load was not significantly different between the group E and group A(P>0.05).Ligament fracture was observed in groups A,B and C and coracoid process fracture was found in groups D and E.(3)These results suggest that from the biomechanical analysis,Single EndoButton Plate reconstruction and double EndoButton Plates reconstruction are effective treatment techniques for coracoclavicular ligament fracture in acromioclavicular joint dislocation,but increase the risk of fracture.The double EndoButton Plates reconstruction dispersed the stress of the steel plate and reduced the contact force between the steel plate and bone,but slightly reduced the ultimate bearing capacity.Single and double EndoButton Plates reconstruction should be selected according to the actual clinical situation.

BACKGROUND:The stability of the pelvis is mainly determined by the posterior pelvic ring and the sacroiliac joint.The posterior pelvic ring injury and the dislocation of the sacroiliac joint caused by high energy impacts such as car accidents increase year by year.Surgical treatment is the best method,and there are many kinds of endophytorepair methods in clinical practice,but which treatment method has the best biomechanical properties is still controversial. OBJECTIVE:To compare the biomechanical properties of three kinds of internal implants:anterior double plates,posterior bridging plate and tension nail in the repair of unilateral unstable pelvic posterior ring injury,to provide a reference for the clinical treatment and development of a new pelvic tension screw. METHODS:(1)Finite element simulation:Mimics,Wrap and SolidWorks were used to establish normal pelvic model,unilateral injured pelvis model,and three kinds of internal implant repaired models(anterior double plates,posterior bridging plate and tension nail).Ansys was used to analyze the stress and deformation of the models.(2)Biomechanical test:A total of 15 intact pelvic specimens were randomly grouped into five groups,normal pelvic model,unilateral injured pelvis model,anterior double plates,posterior bridging plate and tension nail groups.The mechanical test was performed using an Instron E10000 testing machine. RESULTS AND CONCLUSION:(1)Simulation:In the normal pelvic model,the average displacement of the sacrum was 0.174 mm,and the maximum stress of the sacral iliac bone was 10.51 MPa,and the stress distribution was uniform.The mean sacral displacement of the unilateral injured pelvis model was 0.267 mm,and the stress concentration of the model was obvious.The mean displacement of the sacrum in the three repaired models was close to that in the normal pelvic model,and the stress distribution of the sacral iliac bone in the tension nail repaired model was uniform.(2)Mechanical test:The stiffness of the normal pelvic model was(226.38±4.18)N/mm,and that of the unilateral unstable pelvic model was the smallest(130.02±2.19)N/mm.The deviation of the normal pelvic model stiffness and the three repaired models'stiffness were all within(±10%),and the repair effect was obvious.(3)The simulation results were in agreement with the experimental results.(4)The biomechanics of the tension nail repaired model was the most similar to that of the normal pelvis,and this method was the best.The repairing stiffness of the anterior double plate was too large,and the stress shielding effect was more significant.The posterior bridging plate repair could not solve the compensatory effect of the normal side soft tissue and had defects.This study provides an optimal basis for clinical surgery.(5)The new type of pelvic tension nail should be improved from the point of view of the tension nail to retain the good biomechanical properties of the tension nail,while adding other advantages,such as being used for the osteoporotic pelvis.

OBJECTIVE To establish the project approval evaluation system for traditional Chinese medicine （TCM） preparations in medical institutions guided by new drug conversion， to improve the success rate of approval for TCM preparations in medical institutions and lay the foundation for the later drug conversion. METHODS Research and development team used the literature research method and brainstorming method to list and organize relevant elements of project evaluation and determine the initial indicator system. Experts were consulted using the Delphi method to confirm the evaluation index. The weights were calculated based on the proportion of importance scores for each indicator and assigned specific scores to each item. The indicator system was used to evaluate 31 TCM preparations applied for filing by various departments of our hospital from April to July 2023. RESULTS After two rounds of 17 experts’ consultation， the final TCM preparation system included five primary indicators， i.e. theoretical basis， clinical research foundation， pharmaceutical foundation， prescription， and clinical value， as well as 17 secondary indicators including prescription source， traditional Chinese medicine theory， clinical positioning and so on. Human experience was considered as the item which would be rejected as one vote. Based on the above indicator system， our hospital further improved the filing and project approval process for TCM preparations in medical institutions. Among the 31 TCM preparations applied for filing by various departments from April to July 2023， 8 TCM preparations with a score ≥65 were selected for development. CONCLUSIONS The evaluation system is objective， comprehensive， and highly operable. It is suitable for the selection of TCM preparations in medical institutions before research and development.

Objective To explore the effect of microRNA-22-3p (miR-22-3p) regulating the expression of Kruppel-like factor 6 (KLF6) on the cardiomyocyte-like differentiation of bone marrow mesenchymal stem cell (BMSC). Methods Rat BMSC was isolated and cultured,and the third-generation BMSC was divided into a control group,a 5-azacytidine(5-AZA)group,a mimics-NC group,a miR-22-3p mimics group,a miR-22-3p mimics+pcDNA group,and a miR-22-3p mimics+pcDNA-KLF6 group.Real-time fluorescent quantitative PCR (qRT-PCR) was carried out to determine the expression of miR-22-3p and KLF6 in cells.Immunofluorescence staining was employed to detect the expression of Desmin,cardiac troponin T (cTnT),and connexin 43 (Cx43).Western blotting was employed to determine the protein levels of cTnT,Cx43,Desmin,and KLF6,and flow cytometry to detect the apoptosis of BMSC.The targeting relationship between miR-22-3p and KLF6 was analyzed by dual luciferase reporter gene assay. Results Compared with the control group,5-AZA up-regulated the expression of miR-22-3p (q=7.971,P<0.001),Desmin (q=7.876,P<0.001),cTnT (q=10.272,P<0.001),and Cx43 (q=6.256,P<0.001),increased the apoptosis rate of BMSC (q=12.708,P<0.001),and down-regulated the mRNA (q=20.850,P<0.001) and protein (q=11.080,P<0.001) levels of KLF6.Compared with the 5-AZA group and the mimics-NC group,miR-22-3p mimics up-regulated the expression of miR-22-3p (q=3.591,P<0.001;q=11.650,P<0.001),Desmin (q=5.975,P<0.001;q=13.579,P<0.001),cTnT (q=7.133,P<0.001;q=17.548,P<0.001),and Cx43 (q=4.571,P=0.037;q=11.068,P<0.001),and down-regulated the mRNA (q=7.384,P<0.001;q=28.234,P<0.001) and protein (q=4.594,P=0.036;q=15.945,P<0.001) levels of KLF6.The apoptosis rate of miR-22-3p mimics group was lower than that of 5-AZA group (q=8.216,P<0.001).Compared with the miR-22-3p mimics+pcDNA group,miR-22-3p mimics+pcDNA-KLF6 up-regulated the mRNA(q=23.891,P<0.001) and protein(q=13.378,P<0.001)levels of KLF6,down-regulated the expression of Desmin (q=9.505,P<0.001),cTnT (q=10.985,P<0.001),and Cx43 (q=8.301,P<0.001),and increased the apoptosis rate (q=4.713,P=0.029).The dual luciferase reporter gene experiment demonstrated that KLF6 was a potential target gene of miR-22-3p. Conclusion MiR-22-3p promotes cardiomyocyte-like differentiation of BMSC by inhibiting the expression of KLF6.
Animals ; Rats ; Myocytes, Cardiac ; Kruppel-Like Factor 6 ; Connexin 43 ; Desmin ; Cell Differentiation ; Azacitidine/pharmacology* ; Mesenchymal Stem Cells ; RNA, Messenger ; MicroRNAs

Objective:To investigate clinical and laboratory characteristics of secondary hemophagocytic lymphohistiocytosis (sHLH) associated with secondary cutaneous T-cell lymphoma (CTCL) .Methods:CTCL patients with clinically suspected sHLH were collected from Department of Hematology, Wuhan No.1 Hospital from January 2016 to October 2021, and were evaluated according to the HLH-2004 diagnostic criteria and HScore.Results:Seven CTCL patients were confirmedly diagnosed with sHLH, including 2 with primary cutaneous γδT-cell lymphoma (PC-GDTCL) , 3 with cutaneous extranodal natural killer/T-cell lymphoma (C-ENKTCL) , and 2 with primary cutaneous anaplastic large cell lymphoma (PC-ALCL) . All the 7 patients received chemotherapy, but 6 died finally, and the median overall survival duration was 26.5 days (range: 14 - 60 days) after the confirmed diagnosis of CTCL complicated by sHLH. HLH-related gene mutations, which were located in the PRF1 and LYST genes, were identified in 2 patients; lymphoma-related gene mutations were identified in the KRAS and KMT2D genes in 1 PC-GDTCL patient,and in the JAK3 and SAMHD1 genes in another PC-GDTCL patient.Conclusions:CTCL complicated by sHLH usually progresses rapidly, so early diagnosis and treatment are needed. Bone marrow biopsy and mutation screening of lymphoma- and HLH-related genes at initial diagnosis and during disease progression may facilitate early diagnosis.

OBJECTIVE: To investigate the efficacy and safety of chemotherapy combined with venetoclax followed by allogeneic hematopoietic stem cell transplantation (allo-HSCT) for the treatment of blastic plasmacytoid dendritic cell neoplasm (BPDCN). METHODS: The clinical data of 3 patients with BPDCN undergoing allo-HSCT in Department of Hematology, Wuhan First Hospital from July 2017 to November 2021 were collected and retrospectively analyzed. RESULTS: Among the 3 patients, there were 1 male and 2 females, aged 27-52 years old. Skin lesions were observed during initial diagnosis, and it could also be characterized by acute leukemia. Characteristic molecular markers of tumor cells, such as CD4, CD56, CD123, and CD303 were positive. In addition, the expression detection of Bcl-2 in 3 patients were positive. Chemotherapy combined with venetoclax in the initial induction of chemotherapy (1 case) or disease recurrence and progress (2 cases) was performed. There were 2 cases evaluated as complete remission (CR) and 1 case as partial remission (PR) before allo-HSCT. The patients all received a nonmyeloablative conditioning without total body irradiation (TBI). The prevention programme of graft-versus-host disease (GVHD) was antithymocyte globulin + mycophenolate mofetil + cyclosporin A/FK506 ± methotrexate. The number of mononuclear cell (MNC) count was (16.73-18.35)×10⁸/kg, and CD34⁺ cell count was (3.57-4.65)×10⁶/kg. The 3 patients were evaluated as CR after allo-HSCT (+21 to +28 d), the donor-recipient chimerism rate was 100%, and Ⅲ-Ⅳ GVHD was not observed. One patient died at +50 d after transplantation, two patients were followed up for 28 months and 15 months, respectively, and achieved disease-free survival (DFS). CONCLUSIONS BPDCN is a highly aggressive malignant tumor with poor prognosis. Chemotherapy combined with venetoclax followed by allo-HSCT may lead to long-term DFS or even cure. Post-transplant maintenance is still unclear.
Female ; Humans ; Male ; Adult ; Middle Aged ; Retrospective Studies ; Hematopoietic Stem Cell Transplantation/adverse effects* ; Acute Disease ; Graft vs Host Disease/prevention & control* ; Myeloproliferative Disorders ; Leukemia, Myeloid, Acute/pathology* ; Dendritic Cells