The auxin/indole-3-acetic acid (Aux/IAA) gene family is an important regulator for plant growth hormone signaling, involved in plant growth, development, as well as response to environmental stresses. In the present study, we identified SmIAA7 which is potentially associated with Salvia miltiorrhiza leaf development through comparatively analyzed the transcriptome data from different pinnate leaves. SmIAA7 was successfully isolated from S. miltiorrhiza using the specific primers. Then subsequent bioinformatic analysis, prokaryotic expression and purification, subcellular localization, and induction expression analysis under auxin and abiotic stress were performed. The full-length of SmIAA7 contained an ORF of 684 bp encoding a protein of 227 amino acid with a molecular weight of 25.3 kD. Conserved domain analysis showed that SmIAA7 contains the conserved Aux_IAA domain (pfam02309). Sequence analysis and phylogenetic tree analysis results indicated SmIAA7 was phylogenetically close to IAA7 and IAA14 from other plants, suggesting SmIAA7 involved in plant growth and development as well as response to environmental stresses. The prokaryotic expression vector pET28a-SmIAA7 was constructed and SmIAA7 recombinant protein was successfully expressed in E. coli Rosetta (DE3) strain. Subcellular localization experiment demonstrated that SmIAA7 localized in the nucleus of plant cells. Real-time fluorescence quantitative PCR results showed that the expression level of SmIAA7 was upregulated in response to auxin. Drought, low temperature, and salt stress significantly increased the transcript level of SmIAA7 gene. This study lays a foundation for further elucidating the role of SmIAA7 in leaf development, signal transduction, and stress defense in S. miltiorrhiza.

This study established the HPLC fingerprints and a multi-component content determination method for Bidens pilosa var. radiata and B. pilosa and conducted comprehensive evaluation by integrating fingerprint similarity comparison, cluster analysis(CA), and principal component analysis(PCA), aiming to provide a reference for the establishment of quality standards for Bidentis Herba. HPLC was launched on an Agilent Poroshell 120 EC-C_(18) chromatographic column(4.6 mm×250 mm, 4 μm) by gradient elution with a mobile phase of 0.1% aqueous phosphoric acid-acetonitrile at a flow rate of 0.7 mL·min~(-1), detection wavelength of 270 nm, column temperature of 25 ℃, and an injection volume of 5 μL. The fingerprint similarity of 20 batches of Bidentis Herba ranged from 0.775 to 0.979. A total of 20 common peaks were identified, and seven components were confirmed through comparison with reference substances: neochlorogenic acid, chlorogenic acid, isochlorogenic acid A, isochlorogenic acid B, isochlorogenic acid C, rutin, and hyperoside. These seven components exhibited good linearity within the ranges of 3.4-67.4, 33.0-660.3, 26.6-531.2, 3.5-70.5, 6.2-124.9, 2.4-48.3, and 4.6-91.5 μg·mL~(-1), respectively, with correlation coefficients(r) greater than 0.999. The average recovery rates ranged from 96.47% to 104.6%. CA and PCA classified the 20 batches of Bidentis Herba into two categories. PCA yielded two principal components, with a cumulative variance contribution rate of 80.557%. The established HPLC fingerprints and multi-component content determination method are simple and accurate, providing a scientific basis for the quality control and quality standard formulation of Bidentis Herba.
Chromatography, High Pressure Liquid/methods* ; Drugs, Chinese Herbal/chemistry* ; Quality Control ; Chemometrics/methods* ; Bidens/chemistry* ; Principal Component Analysis

This study established the HPLC fingerprints, characteristic chromatograms, and a multi-component content determination method for Bidens bipinnata and B. biternata. The chemical pattern recognition analysis was then employed to clarify the characteristic indexes of quality differences between the two original plants of Bidentis Herba, providing a reference for establishing the quality standards of Bidentis Herba. HPLC was launched on an Agilent Poroshell 120 EC-C_(18) chromatographic column(4.6 mm×250 mm, 4 μm) by gradient elution with a mobile phase of 0.1% aqueous phosphoric acid-acetonitrile at a flow rate of 0.7 mL·min~(-1), detection wavelength of 270 nm, column temperature of 25 ℃, and an injection volume of 5 μL. The similarity between the fingerprints of 18 batches of Bidentis Herba samples and the common pattern(R) ranged from 0.572 to 0.933. A total of 23 chromatographic peaks were calibrated. Through comparison with the reference substances, six components(neochlorogenic acid, chlorogenic acid, isochlorogenic acid A, isochlorogenic acid B, rutin, and hyperoside) were identified and subjected to quantitative analysis. The characteristic fingerprints of B. bipinnata and B. biternata were calibrated with 20 and 17 characteristic peaks, respectively. Among them, peaks 8, 9, 22, and 23 were the characteristic peaks of B. bipinnata, and peak 7 was the characteristic peak of B. biternata, which can be used to distinguish the two original plants of Bidentis Herba. The relative standard deviation of the content of the above-mentioned six components ranged from 36% to 123%. The cluster analysis, principal component analysis, and orthogonal partial least squares-discriminant analysis(OPLS-DA) classified the 18 batches of Bidentis Herba samples into two categories. Additionally, through the analysis of variable importance in projection(VIP) under OPLS-DA, three characteristic indexes, rutin, isochlorogenic acid A, and isochlorogenic acid B, were identified. The analytical method established in this study can comprehensively evaluate the consistency of Bidentis Herba samples derived from different original plants, specifically identify the differential components between them, and effectively distinguish the two original plants of Bidentis Herba, providing a basis for the differentiation between different original plants and the quality control of Bidentis Herba.
Chromatography, High Pressure Liquid/methods* ; Drugs, Chinese Herbal/chemistry* ; Quality Control ; Bidens/chemistry*

Radiochemotherapy-induced oral mucositis (OM) is a common oral complication in patients with tumors following head and neck radiotherapy or chemotherapy. Erosion and ulcers are the main features of OM that seriously affect the quality of life of patients and even the progress of tumor treatment. To date, differences in clinical prevention and treatment plans for OM have been noted among doctors of various specialties, which has increased the uncertainty of treatment effects. On the basis of current research evidence, this expert consensus outlines risk factors, clinical manifestations, clinical grading, ancillary examinations, diagnostic basis, prevention and treatment strategies and efficacy indicators for OM. In addition to strategies such as basic oral care, anti-inflammatory and analgesic agents, anti-infective agents, pro-healing agents, and photobiotherapy recommended in previous guidelines, we also emphasize the role of traditional Chinese medicine in OM prevention and treatment. This expert consensus aims to provide references and guidance for dental physicians and oncologists in formulating strategies for OM prevention, diagnosis, and treatment, standardizing clinical practice, reducing OM occurrence, promoting healing, and improving the quality of life of patients.
Humans ; Chemoradiotherapy/adverse effects* ; Consensus ; Risk Factors ; Stomatitis/etiology*

Platycodonis Radix is the dry root of Platycodon grandiflorum of Campanulaceae, which has a variety of pharmacological effects and is a commonly used bulk Chinese medicine. In this study, the chloroplast genome sequences of six P. grandiflorum from different producing areas has been sequenced with Illumina HiSeq X Ten platform. The specific DNA barcodes were screened, and the germplasm resources and genetic diversity were analyzed according to the specific barcodes. The total length of the chloroplast genome of 6 P. grandiflorum samples was 172 260-172 275 bp, and all chloroplast genomes showed a typical circular tetrad structure and encoded 141 genes. The comparative genomics analysis and results of amplification efficiency demonstrated that trnG-UCC and ndhG_ndhF were the potential specific DNA barcodes for identification the germplasm resources of P. grandiflorum. A total of 305 P. grandiflorum samples were collected from 15 production areas in 9 provinces, for which the fragments of trnG-UCC and ndhG_ndhF were amplificated and the sequences were analyzed. The results showed that trnG-UCC and ndhG_ndhF have 5 and 11 mutation sites, respectively, and 5 and 7 haplotypes were identified, respectively. The combined analysis of the two sequences formed 13 haplotypes (named Hap1-Hap13), and Hap4 is the main genotype, followed by Hap1. The unique haplotypes possessed by the three producing areas can be used as DNA molecular tags in this area to distinguish from the germplasm resources of P. grandiflorum from other areas. The haplotype diversity, nucleotide diversity and genetic distance were 0.94, 4.79×10^-3 and 0.000 0-0.020 3, respectively, suggesting that the genetic diversity was abundant and intraspecific kinship was relatively close. This study laid a foundation for the identification of P. grandiflorum, the protection and utilization of germplasm resources, and molecular breeding.

Objective:To study the in vitro construction of functional and self-renewing cartilage organoids based on cartilage acellular extracellular matrix (ECM) microcarriers.Methods:Fresh porcine articular cartilage was taken. The merely crushed cartilage particles were set as natural cartilage group and ECM microcarriers of appropriate particle size, which were prepared by the acellular method of combining physical centrifugation and chemical extraction, were set as microcarrier group. Cartilage organoids were constructed by loading human umbilical cord mesenchymal stem cells (hUCMSCs) and human chondrocytes (hCho) with a ratio of 3∶1 with microcarriers through a rotating bioreactor. The organoids with different induction times were divided into 0-, 7-, 14-, and 21-day induction groups. The cell residues of the microcarrier group and natural cartilage group were evaluated by 4′, 6-diaminidine 2-phenylindole (DAPI) fluorescence staining and DNA quantitative analysis. The retention of microcarrier components was observed by Safranin O and toluidine blue stainnings, and the collagen and glycosaminoglycan (GAGs) levels in the microcarrier group and the natural cartilage group were determined by colorimetric method and dimethyl-methylene blue (DMMB) method. The microcarriers were further characterized by scanning electron microscopy and energy dispersive spectroscopy. The hUCMSCs cultured with Dulbecco′s Modified Eagle′s Medium (DMEM) supplemented with fetal bovine serum (FBS) in a volume fraction of 10% was used as the control group and the hUCMSCs cultured with the microcarrier extract was used as the experimental group. Subgroups of hUCMSCs cultured at 3 time points: 1, 3 and 5 days were set up in the two groups separately. Cell Counting Kit 8 (CCK-8) was used to detect the biocompatibility of the two groups. The cellular activity of the organoids of the 0-, 7-, 14-, and 21-day induction groups was detected by live/dead staining and the self-renewal ability of the cartilage organoids of the 14-day induced group was identified by Ki67 fluorescence staining. The organoids of the 7-, 14-, and 21-day induction groups were detected by RT-PCR in terms of the expression levels of chondrogenesis-related marker aggrecan (ACAN), type II collagen (COL2A1), SRY-related high mobility group-box gene-9 (SOX9), cartilage hypertrophy-and mineralization-related marker type I collagen (COL1A1), Runt-related transcription factor-2 (RUNX2), and osteocalcin (OCN). Colorimetric and DMMB assays were performed to determine the ability of organoids in the 0-, 7-, 14-, and 21-day induction groups to secrete collagen and GAGs.Results:The results of DAPI fluorescent staining showed that the natural cartilage group had a large number of nuclei while the microcarrier group hardly had any nuclei. The DNA content of the microcarrier group was (7.8±1.8)ng/mg, which was significantly lower than that of the natural cartilage group [(526.7±14.7)ng/mg] ( P<0.01). Saffranin O and toluidine blue staining showed that the microcarrier was dark- and uniform-colored and it kept a lot of cartilage ECM components. The collagen and GAGs contents of the microcarrier group were (252.9±1.4)μg/mg and (173.4±0.8)μg/mg, which were significantly lower than those of the natural cartilage group [(311.9±2.2)μg/mg and (241.3±0.7)μg/mg] ( P<0.01). Scanning electron microscopy showed that the surface of the microcarriers had uneven and interleaved collagen fiber network. The results of energy spectrum analysis showed that elements C, O and N were evenly distributed in the microcarriers, indicating that the composition of the microcarrier was uniform. The microcarrier had good biocompatibility and there was no statistical significance in the results of CCK-8 test between the control group and the experimental group after 1 and 3 days of culture ( P>0.05). After 5 days of culture, the A value of the experimental group was 0.53±0.02, which was better than that of the control group (0.44±0.03) ( P<0.05). In the 0-, 7-, 14-, and 21-day induction groups, hUCMSCs and hCho were attached to the surface of the microcarriers, with good cellular activity, and the live/death rates were (70.6±1.1)%, (80.5±0.6)%, (94.5±0.9)%, and (90.8±0.5)% respectively ( P<0.01). There were a large number of Ki67 positive cells in cartilage organoids. RT-PCR showed that the expression levels of ACAN, COL2A1, SOX9, COL1A1, RUNX2 and OCN were 1.00±0.09, 1.00±0.24, 1.00±0.18, 1.00±0.03, 1.00±0.06 and 1.00±0.13 respectively in the 7-day induction group; 4.16±0.28, 5.09±1.25, 5.65±1.05, 0.47±0.01, 1.68±0.02 and 0.21±0.06 respectively in the 14-day induction group; 13.42±0.92, 3.07±0.21, 1.84±1.08, 2.72±0.17, 2.91±0.18 and 3.32±1.20 respectively in the 21-day induction group. Compared with the 7-day induction group, the expression levels of ACAN, COL2A1, SOX9 and RUNX2 in the 14-day group were increased ( P<0.05), but COL1A1 expression level was decreased ( P<0.05), with no significant difference in OCN expression level ( P>0.05). Compared with the 7-day induction group, the expression levels of ACAN, COL1A1 and RUNX2 in the 21-day induction group were significantly increased ( P<0.01), with no significant differences in the expression levels of COL2A1, SOX9 and OCN ( P>0.05). Compared with the 14-day induction group, the expression levels of ACAN, COL1A1, RUNX2 and OCN in the 21-day group were increased ( P<0.05 or 0.01), with no significant difference in the expression level of COL2A1 ( P>0.05), but the expression level of SOX9 was decreased ( P<0.05). The contents of collagen in 0-, 7-, 14-and 21-day induction groups were (219.15±0.48)μg/mg, (264.07±1.58)μg/mg, (270.83±0.84)μg/mg and (280.01±0.48)μg/mg respectively. The GAGs contents were (171.18±1.09)μg/mg, (184.06±1.37)μg/mg, (241.08±0.84)μg/mg and (201.14±0.17)μg/mg respectively. Compared with the 0-day induction group, the contents of collagen and GAGs in 7-, 14-, and 21-day induction groups were significantly increased ( P<0.01), among which the content of collagen was the lowest in 7-day induction group ( P<0.01) but the highest in the 21-day induced group ( P<0.01); the content of GAGs was the lowest in the 7-day induced group ( P<0.01) but the highest in the 14-day induction group ( P<0.01). Conclusions:The microcarriers prepared by combining physical and chemical methods are decellularized successfully, with more matrix retention, uniform composition and on cytotoxicity. By loading microcarriers with hUCMSCs and hCho, cartilage organoids are successfully constructed in vitro, which are characterized by good cell activity, self-renewal ability, strong expression of genes related to chondrogenesis and secretion of collagen and GAGs. The cartilage organoids constructed at 14 days of induction have the best chondrogenic activity.

Ankylosing spondylitis (AS) combined with lower cervical fracture is often categorized into unstable fracture, with a high incidence of neurological injury and a high rate of disability and morbidity. As factors such as shoulder occlusion may affect the accuracy of X-ray imaging diagnosis, it is often easily misdiagnosed at the primary diagnosis. Non-operative treatment has complications such as bone nonunion and the possibility of secondary neurological damage, while the timing, access and choice of surgical treatment are still controversial. Currently, there are no clinical practice guidelines for the treatment of AS combined with lower cervical fracture with or without dislocation. To this end, the Spinal Trauma Group of Orthopedics Branch of Chinese Medical Doctor Association organized experts to formulate Clinical guidelines for the treatment of ankylosing spondylitis combined with lower cervical fracture in adults ( version 2024) in accordance with the principles of evidence-based medicine, scientificity and practicality, in which 11 recommendations were put forward in terms of the diagnosis, imaging evaluation, typing and treatment, etc, to provide guidance for the diagnosis and treatment of AS combined with lower cervical fracture.

Thrombosis is a key factor that increases the mortality rate of COVID-19 patients and causes long COVID sequelae. Guanxinning Tablet (GXNT), which is composed of Salvia miltiorrhiza and Ligusticum Chuanxiong, has significant antithrombotic activity, but the similarities and differences between its anti-conventional thrombus and microthrombus induced by COVID-19 remain unclear. In this paper, the main active components, potential targets and mechanisms of GXNT in the treatment of thrombus and microthrombus caused by COVID-19 were preliminarily revealed by using anti-platelet experiments in vitro, network pharmacology analysis, molecular docking technology and molecular biology experiments. The results of platelet aggregation and adhesion experiments in vitro showed that GXNT had significant anti-platelet aggregation and adhesion activities in a dose-dependent manner. Using network pharmacology analysis, it was revealed that salvianolic acid B, tanshinone IIA, caffeic acid and ligustrazine in GXNT could resist thrombus and microthrombus caused by COVID-19 through key targets as the high mobility group box 1 protein (HMGB1), tumor necrosis factor (TNF), interleukin 6 (IL6) and AKT serine/threonine kinase 1 (AKT1). HMGB1 signaling pathway is one of its key common mechanisms. Western blot also indicated that GXNT significantly inhibited the expression of HMGB1 protein in platelets. In summary, this paper explores the similarities and differences between the mechanism of GXNT against conventional thrombus and microthrombus caused by COVID-19 and provides drug reference and theoretical basis for clinical prevention and treatment of long COVID sequelae. The animal experiment has been approved by the Experimental Animal Ethics Committee of Tianjin University of Traditional Chinese Medicine (No. TCM-LAEC2023187g1549).

Mindfulness training has shown beneficial effects on cognitive functions in older adults.Howev-er,the studies on this topic have used different methods and populations,and their results were inconsistent.No sys-tematic review has synthesized and evaluated these findings.This review aims to address this gap by categorizing the studies based on the training methods and cohorts of older adults,and summarizing the effects of mindfulness training on cognitive function.The review finds that mindfulness training had different effects depending on the lev-el of cognitive decline and the training method.Both standardized and unstandardized training methods improved cognitive performance in older adults with normal or subjective cognitive decline.However,the effect of mindful-ness training diminished as cognitive decline worsened,being inconsistent in mild cognitive impairment and non-sig-nificant in dementia.The review also discusses the possible mechanisms and suggested directions for future re-search.

Objective To carry out rigid-body inverse dynamics modelling and analysis of a self-designed 6RSS parallel bio-inspired masticatory robot.Methods Firstly,the functions of kinematic variables including translational/rotational velocities and accelerations were derived for rigid-body inverse dynamics modelling.Secondly,the rigid-body inverse dynamics model was established with the Newton-Euler's law.Finally,the chewing motion trajectories of the oral health volunteers were tracked and numerical calculations were carried out in the case where the robot was subjected to a chewing reaction force.Results Numerical calculations showed that the driving torque and the constraint force of the robot peaked when the chewing reaction force was at its maximum.Conclusion The external force has a large impact on the inverse dynamics of the robot,and theoretical references are provided for the motion control and optimal design of the robot.[Chinese Medical Equipment Journal,2024,45(3):16-22]