OBJECTIVE To focus on the classic NOD-like receptor protein 3 （NLRP3）/Caspase-1/gasdermin D （GSDMD） pyroptosis pathway and explore the mechanism by which Huatan qushi huoxue formula （HQHF） inhibits macrophage pyroptosis to ameliorate metabolic dysfunction-associated steatohepatitis （MASH）. METHODS RAW264.7 cells were divided into 5 groups： Control group （10% blank serum）， Model group [10% blank serum+5 μg/mL lipopolysaccharide （LPS）]， HQHF-L group （2.5% drug-containing serum+7.5% blank serum+5 μg/mL LPS）， HQHF-M group （5% drug-containing serum+5% blank serum+5 μg/mL LPS）， and HQHF-H group （10% drug-containing serum+5 μg/mL LPS）. After 24 h of routine culture post-administration， cells and supernatants were collected for assays. Cell morphology was observed via scanning electron microscopy and phase-contrast microscopy； localization and expression of gasdermin D-N （GSDMD-N） were observed by immunofluorescence. Interleukin-1β （IL-1β） and IL-18 contents in supernatants were detected by ELISA； mRNA and protein expressions of NLRP3， Caspase-1， and GSDMD were measured using real-time PCR and Western blot. RESULTS Compared with the Control group， the Model group showed typical pyroptotic morphology （cell membrane bulging and pore formation）， increased aggregation and fluorescence intensity of GSDMD-N on the cell membrane （ P ＜0.05）， significantly increased the contents of IL-1β and IL-18 in cell supernatants （ P ＜0.05）， and significantly up-regulated mRNA and protein expressions of NLRP3， Caspase-1， and GSDMD in cells （ P ＜0.05）. Compared with the Model group， the HQHF-L， HQHF-M and HQHF-H groups showed improved pyroptotic morphology， reduced membrane localization and significantly weakened fluorescence intensity of GSDMD-N （ P ＜0.05）， significantly decreased the contents of IL-1β and IL-18 in cell supernatants （ P ＜0.05）， and significantly down-regulated mRNA and protein expressions of NLRP3， Caspase-1， and GSDMD in cells （ P ＜0.05）. CONCLUSIONS HQHF inhibits LPS-induced macrophage pyroptosis， and its mechanism of improving MASH may be associated with the suppression of the activation of the classical NLRP3/Caspase-1/GSDMD pyroptosis pathway.

BACKGROUND:Maxillofacial bone three-dimensional(3D)printing technology has been widely used in clinical diagnosis and treatment,but the data source before performing maxillofacial bone 3D printing mainly comes from the CT scanning data.The lens,thyroid and other parts of the human body are extremely sensitive to X-rays;therefore,it is particularly important to effectively reduce the dose of CT radiation when acquiring the data source.OBJECTIVE:To explore the feasibility of low-dose CT technology in optimizing radiation dose for maxillofacial bone 3D printing.METHODS:The medical records of 65 patients who underwent maxillofacial bone 3D printing in the Department of Stomatology at the General Hospital of Northern Theater Command from March 2021 to December 2023 were retrospectively collected and categorized into a conventional CT-dose 3D printing group(conventional CT-dose,120 kVp,automated tube current modulation,n=32)and a low-CT-dose 3D printing group(low-CT-dose group,80 kVp,automated tube current modulation,n=33).The effective dose of radiation was calculated and compared between the two groups.A Likert scale was used to evaluate the quality of 3D printing in the two groups,and the measurement bias and consistency between evaluators were measured using the Bland-Altman method.RESULTS AND CONCLUSION:(1)There was no significant difference in the general demographic characteristics(age,height,weight,body mass,sex,and body mass index)between the two groups(all P＞0.05).(2)The effective dose value of the low CT-dose 3D printing group was(0.3±0.1)mSv,which was about 62.5％lower than that in the conventional CT-dose 3D printing group[(0.8±0.1)mSv].(3)There was no significant difference in the subjective scoring of 3D printing quality between the two groups(all P＞0.05).The subjective consistency among evaluators was good,with Kappa values of 0.85,0.80,and 0.76.The scatter points in the Bland-Altman for both protocols were uniformly distributed within the standard deviation line,indicating good consistency between the two groups.To conclude,low-dose CT technology can be effectively applied in maxillofacial bone 3D printing,reducing radiation dose without affecting the quality of 3D printing.

BACKGROUND:Maxillofacial bone three-dimensional(3D)printing technology has been widely used in clinical diagnosis and treatment,but the data source before performing maxillofacial bone 3D printing mainly comes from the CT scanning data.The lens,thyroid and other parts of the human body are extremely sensitive to X-rays;therefore,it is particularly important to effectively reduce the dose of CT radiation when acquiring the data source.OBJECTIVE:To explore the feasibility of low-dose CT technology in optimizing radiation dose for maxillofacial bone 3D printing.METHODS:The medical records of 65 patients who underwent maxillofacial bone 3D printing in the Department of Stomatology at the General Hospital of Northern Theater Command from March 2021 to December 2023 were retrospectively collected and categorized into a conventional CT-dose 3D printing group(conventional CT-dose,120 kVp,automated tube current modulation,n=32)and a low-CT-dose 3D printing group(low-CT-dose group,80 kVp,automated tube current modulation,n=33).The effective dose of radiation was calculated and compared between the two groups.A Likert scale was used to evaluate the quality of 3D printing in the two groups,and the measurement bias and consistency between evaluators were measured using the Bland-Altman method.RESULTS AND CONCLUSION:(1)There was no significant difference in the general demographic characteristics(age,height,weight,body mass,sex,and body mass index)between the two groups(all P＞0.05).(2)The effective dose value of the low CT-dose 3D printing group was(0.3±0.1)mSv,which was about 62.5％lower than that in the conventional CT-dose 3D printing group[(0.8±0.1)mSv].(3)There was no significant difference in the subjective scoring of 3D printing quality between the two groups(all P＞0.05).The subjective consistency among evaluators was good,with Kappa values of 0.85,0.80,and 0.76.The scatter points in the Bland-Altman for both protocols were uniformly distributed within the standard deviation line,indicating good consistency between the two groups.To conclude,low-dose CT technology can be effectively applied in maxillofacial bone 3D printing,reducing radiation dose without affecting the quality of 3D printing.

The surgical treatment of thoraco-abdominal aortic aneurysm (TAAA) requires a unique multidisciplinary approach. A thorough preoperative examination and evaluation are essential to determine the optimal timing for surgery and to optimize organ function as needed. During the perioperative period, excellent surgical skills and an appropriate strategy for extracorporeal circulation will be employed based on the extent of the aneurysm. Additionally, necessary measures will be taken to monitor and protect the functions of vital organs. Close monitoring and management in the postoperative stage, along with early detection of complications and effective treatment, are crucial for improving the prognosis of TAAA surgery. This article reviews the current research progress in the perioperative management of TAAA surgery.

The innate immune sensor NLRP3 inflammasome overactivation is involved in the pathogenesis of ulcerative colitis. PGAM5 is a mitochondrial phosphatase involved in NLRP3 inflammasome activation in macrophages. However, the role of PGAM5 in ulcerative colitis and the mechanisms underlying PGAM5 regulating NLRP3 activity remain unknown. Here, we show that PGAM5 deficiency ameliorates dextran sodium sulfate (DSS)-induced colitis in mice via suppressing NLRP3 inflammasome activation. By combining APEX2-based proximity labeling focused on PGAM5 with quantitative proteomics, we identify NEK7 as the new binding partner of PGAM5 to promote NLRP3 inflammasome assembly and activation in a PGAM5 phosphatase activity-independent manner upon inflammasome induction. Interfering with PGAM5-NEK7 interaction by punicalagin inhibits the activation of the NLRP3 inflammasome in macrophages and ameliorates DSS-induced colitis in mice. Altogether, our data demonstrate the PGAM5-NEK7 interaction in macrophages for NLRP3 inflammasome activation and further provide a promising therapeutic strategy for ulcerative colitis by blocking the PGAM5-NEK7 interaction.

BACKGROUND: The FAVOR (Comparison of Quantitative Flow Ratio Guided and Angiography Guided Percutaneous Intervention in Patients with Coronary Artery Disease) III China trial demonstrated that percutaneous coronary intervention (PCI) lesion selection using quantitative flow ratio (QFR) measurement, a novel angiography-based approach for estimating fractional flow reserve, improved two-year clinical outcomes compared with standard angiography guidance. This study aimed to assess the cost-effectiveness of QFR-guided PCI from the perspective of the current Chinese healthcare system. METHODS: This study is a pre-specified analysis of the FAVOR III China trial, which included 3825 patients randomized between December 25, 2018, and January 19, 2020, from 26 centers in China. Patients with stable or unstable angina pectoris or those ≥72 hours post-myocardial infarction who had at least one lesion with a diameter stenosis between 50% and 90% in a coronary artery with a ≥2.5 mm reference vessel diameter by visual assessment were randomized to a QFR-guided strategy or an angiography-guided strategy with 1:1 ratio. During the two-year follow-up, data were collected on clinical outcomes, quality-adjusted life-years (QALYs), estimated costs of index procedure hospitalization, outpatient cardiovascular medication use, and rehospitalization due to major adverse cardiac and cerebrovascular events (MACCE). The primary analysis calculated the incremental cost-effectiveness ratio (ICER) as the cost per MACCE avoided. An ICER of ¥10,000/MACCE event avoided was considered economically attractive in China. RESULTS: At two years, the QFR-guided group demonstrated a reduced rate of MACCE compared to the angiography-guided group (10.8% vs . 14.7%, P <0.01). Total two-year costs were similar between the groups (¥50,803 ± 21,121 vs . ¥50,685 ± 23,495, P = 0.87). The ICER for the QFR-guided strategy was ¥3055 per MACCE avoided, and the probability of QFR being economically attractive was 64% at a willingness-to-pay threshold of ¥10,000/MACCE avoided. Sensitivity analysis showed that QFR-guided PCI would become cost-saving if the cost of QFR were below ¥3682 (current cost: ¥3800). Cost-utility analysis yielded an ICER of ¥56,163 per QALY gained, with a 53% probability of being cost-effective at a willingness-to-pay threshold of ¥85,000 per QALY gained. CONCLUSION: In patients undergoing PCI, a QFR-guided strategy appears economically attractive compared to angiographic guidance from the perspective of the Chinese healthcare system. TRIAL REGISTRATION ClinicalTrials.gov , NCT03656848.
Humans ; Cost-Benefit Analysis ; Percutaneous Coronary Intervention/methods* ; Male ; Female ; Coronary Angiography/methods* ; Middle Aged ; Aged ; Coronary Artery Disease/surgery* ; Quality-Adjusted Life Years ; Fractional Flow Reserve, Myocardial/physiology*

ObjectiveTo investigate the effects of different fermentation methods and times on the fungal flora and chemical composition of Aurantii Fructus， in order to obtain the optimal fermentation conditions and flora structure， and to ensure the stability and controllability of the fermented varieties. MethodsScanning electron microscopy was used to observe and analyze the colony characteristics on the surface of Aurantii Fructus under different fermentation conditions. Internal transcribed spacer 2（ITS2） high-throughput sequencing， combined with fungal community diversity analysis and fungal community structure analysis， were used to obtain the fungal flora microbial categories of Aurantii Fructus under the conditions of traditional pressure-shelf fermentation and non-pressure-shelf natural fermentation for 7， 14， 21 d（numbered Y1-Y3 for the former， and numbered F1-F3 for the latter）， respectively. At the same time， the chemical components in the fermentation process were detected by ultra-high performance liquid chromatography-quadrupole-time-of-flight mass spectrometry（UPLC-Q-TOF-MS/MS）， combined with principal component analysis（PCA）， partial least squares-discriminant analysis（PLS-DA） and compound retention time， parent ions， characteristic fragment ions and other information， the differential compounds between the different fermentation samples were screened and identified. ResultsThe analysis of fungal community diversity showed that the dominant flora did not change at different fermentation time points in the traditional pressure-shelf fermentation method， while in the non-pressure-shelf natural fermentation method， there was a significant difference with the fermentation process， and at the genus level， the dominant genus of samples Y1， Y2， Y3 and F2 was Aspergillus， while the dominant genera of samples F1 and F3 were both Rhizopus. This indicated that the microbial growth environment provided by the traditional fermentation method was more stable， and the microbial community structure was more stable， which was more conducive to the stable and controllable fermentation process and fermented products. A total of 155 compounds were identified by compositional analysis， including 70 flavonoids， 38 coumarins， 10 alkaloids， 34 organic acids and 3 other compounds. After fermentation， two new components of ribalinine and pranferin were produced. Different fermentation conditions also brought about differences in chemical composition， multivariate statistical analysis obtained 26 differential compounds under two different fermentation methods， mainly including flavonoids， organic acids and coumarins. Comprehensively， the microbial community structure of samples fermented by the traditional pressure-shelf method of Aurantii Fructus for 14 d was stable， the species richness was high and the overall content of differential compounds was high， which was the optimal processing condition. ConclusionCompared with non-pressure-shelf natural fermentation， the traditional method has obvious advantages in terms of the stability of the microbial community structure and the content of chemical compounds， and the optimal condition is 14 days of fermentation. This study is helpful to promote the quality stability and fermentation bioavailability of fermented products of Aurantii Fructus， as well as to provide an experimental basis for the further improvement of the quality control methods of this variety.

ObjectiveTo investigate the effects of different fermentation methods and times on the fungal flora and chemical composition of Aurantii Fructus， in order to obtain the optimal fermentation conditions and flora structure， and to ensure the stability and controllability of the fermented varieties. MethodsScanning electron microscopy was used to observe and analyze the colony characteristics on the surface of Aurantii Fructus under different fermentation conditions. Internal transcribed spacer 2（ITS2） high-throughput sequencing， combined with fungal community diversity analysis and fungal community structure analysis， were used to obtain the fungal flora microbial categories of Aurantii Fructus under the conditions of traditional pressure-shelf fermentation and non-pressure-shelf natural fermentation for 7， 14， 21 d（numbered Y1-Y3 for the former， and numbered F1-F3 for the latter）， respectively. At the same time， the chemical components in the fermentation process were detected by ultra-high performance liquid chromatography-quadrupole-time-of-flight mass spectrometry（UPLC-Q-TOF-MS/MS）， combined with principal component analysis（PCA）， partial least squares-discriminant analysis（PLS-DA） and compound retention time， parent ions， characteristic fragment ions and other information， the differential compounds between the different fermentation samples were screened and identified. ResultsThe analysis of fungal community diversity showed that the dominant flora did not change at different fermentation time points in the traditional pressure-shelf fermentation method， while in the non-pressure-shelf natural fermentation method， there was a significant difference with the fermentation process， and at the genus level， the dominant genus of samples Y1， Y2， Y3 and F2 was Aspergillus， while the dominant genera of samples F1 and F3 were both Rhizopus. This indicated that the microbial growth environment provided by the traditional fermentation method was more stable， and the microbial community structure was more stable， which was more conducive to the stable and controllable fermentation process and fermented products. A total of 155 compounds were identified by compositional analysis， including 70 flavonoids， 38 coumarins， 10 alkaloids， 34 organic acids and 3 other compounds. After fermentation， two new components of ribalinine and pranferin were produced. Different fermentation conditions also brought about differences in chemical composition， multivariate statistical analysis obtained 26 differential compounds under two different fermentation methods， mainly including flavonoids， organic acids and coumarins. Comprehensively， the microbial community structure of samples fermented by the traditional pressure-shelf method of Aurantii Fructus for 14 d was stable， the species richness was high and the overall content of differential compounds was high， which was the optimal processing condition. ConclusionCompared with non-pressure-shelf natural fermentation， the traditional method has obvious advantages in terms of the stability of the microbial community structure and the content of chemical compounds， and the optimal condition is 14 days of fermentation. This study is helpful to promote the quality stability and fermentation bioavailability of fermented products of Aurantii Fructus， as well as to provide an experimental basis for the further improvement of the quality control methods of this variety.

Objective:To explore a new surgical approach [anteromedial approach of the hip (AMA)] for Pipkin Ⅰ and Ⅱ femoral head fractures through an imaging and anatomical study.Methods:The hip imaging data were collected of the 38 patients who had undergone lower limb CT angiography for open tibiofibular fractures at Department of Orthopaedics, The Sixth People’s Hospital, School of Medicine, Shanghai Jiao Tong University from June 2023 to January 2024. There were 20 males aged (40.9±3.5) years and 18 females aged (41.5±3.3) years. The origins and shapes of the femoral artery and its main branches were observed. The distances between the femoral head and the femoral artery, the medial femoral circumflex artery, and the lateral femoral circumflex artery were measured. Four fresh adult cadavers were collected, including 2 males and 2 females. Their ages of death were 56, 65, 72 and 78 years old, respectively. An incision was made along the axis of the limb at the midpoint of the inguinal ligament at the 4 fresh cadavers. After the femoral head was exposed through the gap between the femoral artery and the femoral nerve, the range of the femoral head exposed was marked.Results:The femoral artery ran along the anteromedial side of the femoral head. The shortest distance between the medial femoral circumflex artery and the femoral head was (13.1±5.7) mm, and the shortest distance between the origin of the lateral femoral circumflex artery and the femoral head (21.6±8.6) mm. On the lateral view of CT angiography, the distance between the femoral artery and the femoral head was (20.6±4.9) mm at the level of the apex of greater trochanter. Gross observation on the cadavers found only small branches of vessels between the femoral artery and the femoral nerve. After the femoral artery and femoral nerve were respectively pulled medially and laterally, the anterior-inferior part of the femoral head was exposed directly by pulling the muscles to open the joint capsule. The exposure range of the femoral head was further expanded through internal and external rotation of the hip joint under traction. The anatomical gap between the femoral artery and the femoral nerve was named the AMA.Conclusion:AMA utilizes the potential gap between the femoral artery and the femoral nerve, providing a new surgical approach for exposure and fixation of Pipkin type Ⅰ and Ⅱ femoral head fractures.