Objective:To investigate the impact of various conditions on the adsorption of quetiapine by activated carbon, establish a method for evaluating the adsorption efficacy of activated carbon on quetiapine, and assess the adsorption effects both in vitro and in vivo.Methods:In vitro experiments involved incubating activated carbon with quetiapine under different conditions, including varying organic solvent contents, types of organic solvents, adsorption temperatures, adsorption times, and pH. After reaching equilibrium, the mixtures were centrifuged, and the supernatants were collected. The concentration of quetiapine in the supernatants was measured using LC-MS/MS, and the adsorption rates were calculated. The log-transformed concentration of activated carbon was used as the independent variable and the adsorption rate as the dependent variable for function fitting using Origin 2021 software. In the in vivo experiments, rats were administered quetiapine orally, followed by 125 mg/mL of activated carbon in the experimental group. Blood samples were collected at multiple time points pre- and post-administration (0.17 h, 0.33 h, 0.50 h, 0.75 h, 1 h, 1.5 h, 2 h, 4 h, 6 h, 12 h, and 24 h). Plasma samples were pre-treated and the quetiapine concentrations were determined using LC-MS/MS. Pharmacokinetic parameters for both control and experimental groups were calculated using DAS 2.0 software.Results:The factors such as organic solvent content, type of organic solvent, adsorption temperature, adsorption time, and pH value significantly influenced the adsorption efficiency of quetiapine by activated carbon, leading to the optimization and standardization of the in vitro adsorption methodology. Among the 100 different adsorption function models tested, the Boltzmann function was identified as the most suitable models for describing the adsorption of quetiapine by activated carbon. Pharmacokinetic analysis showed that the experimental group treated with activated carbon exhibited significantly reduced C max and AUC for quetiapine compared to the control group. Conclusion:The results of both in vitro and in vivo experiments demonstrate that activated carbon effectively adsorbs quetiapine, providing a potential method for mitigating quetiapine absorption.

Three-dimensional(3D)printing technology,which is based on computer aided design,presents innovative solutions for clinical surgical treatments and is increasingly being utilized in clinical settings.By integrating medical-image processing software and a 3D printer with customized materials,physicians can efficiently fabricate a 3D model layer by layer,thus realizing the reconstruction of human-body models with specific objectives.These models vividly showcase the anatomical structures,fracture types,and rupture severity,thereby facilitating doctors in understanding the fracture being examined.Beyond serving as a mere demonstration tool,the physi-cal model assists doctors in designing personalized implants and selecting customized surgical guide plates and fixation screws.Surgeons can improve the surgical accuracy and efficacy by refining the surgical plan via preoperative simulation operations.This article presents a summary of the application of computer-simulation surgery in conjunction with 3D printing technology in various complex surgeries.Addi-tionally,the significant potential applications of 3D printing technology in the clinical orthopedics field are discussed.

Three-dimensional(3D)printing technology,which is based on computer aided design,presents innovative solutions for clinical surgical treatments and is increasingly being utilized in clinical settings.By integrating medical-image processing software and a 3D printer with customized materials,physicians can efficiently fabricate a 3D model layer by layer,thus realizing the reconstruction of human-body models with specific objectives.These models vividly showcase the anatomical structures,fracture types,and rupture severity,thereby facilitating doctors in understanding the fracture being examined.Beyond serving as a mere demonstration tool,the physi-cal model assists doctors in designing personalized implants and selecting customized surgical guide plates and fixation screws.Surgeons can improve the surgical accuracy and efficacy by refining the surgical plan via preoperative simulation operations.This article presents a summary of the application of computer-simulation surgery in conjunction with 3D printing technology in various complex surgeries.Addi-tionally,the significant potential applications of 3D printing technology in the clinical orthopedics field are discussed.

Objective:To investigate the clinical characteristics and interventions associated with drug-induced anaphylaxis in the emergency infusion room.Methods:Bases on the adverse drug reaction database from the emergency medicine center of the First Affiliated Hospital of Nanjing Medical University, clinical data of patients who experienced drug-induced anaphylaxis in the emergency infusion room between November 2019 and November 2023 were collected, including gender, age, history of previous adverse drug reactions, allergy history, Charlson comorbidity index, medication details, information related to drug-induced anaphylaxis (onset time, clinical manifestations), interventions, outcomes, and follow-up. The clinical characteristics and interventions in these patients were analyzed.Results:During the study period, a total of 398 772 patients in the emergency infusion room in our hospital received intravenous infusion of drugs. Of them, 625 cases developed adverse drug reactions (ADRs) and 75 cases developed drug-induced anaphylaxis, accounting for 0.02% (75/398 772) of the total infusion patients and 12.0% (75/625) of all ADR cases. Of the 75 patients with anaphylaxis, 30 cases (40%) were classified as grade Ⅱ, and 45 cases (60%) as grade Ⅲ, with no grade Ⅳ cases. The most common drugs involved in 75 cases of anaphylaxis were anti-infective drugs (41 cases, 54.7%). Drug-induced anaphylaxis exhibited diverse clinical manifestations, with cardiovascular symptoms being the most common, primarily varying degrees of transient hypotension (67 cases, 89.3%), followed by systemic and neurological symptoms, including profuse sweating (31 cases, 41.3%) and dizziness (28 cases, 37.3%). All 75 patients with anaphylaxis were treated with measures such as discontinuation of medication, replacement of infusion sets, rapid assessment of circulation and respiration, and monitoring of vital signs, of which 65 (86.7%) received rapid intravenous infusion for volume expansion, 6 (8.0%) received intravenous injection of glucocorticoids, 3 (4.0%) received intramuscular injection of 0.5 mg epinephrine, and 2 (2.7%) received antihistamines. All 75 patients showed improvement in symptoms, and no sequelae or deaths were found.Conclusions:In the emergency infusion room, the severity of anaphylaxis is mainly grade Ⅱ and Ⅲ with a good prognosis after timely intervention. The treatment measures mainly focus on rapid intravenous infusion for volume expansion, and the use of epinephrine is relatively low.

Objective:To investigate the clinical characteristics and interventions associated with drug-induced anaphylaxis in the emergency infusion room.Methods:Bases on the adverse drug reaction database from the emergency medicine center of the First Affiliated Hospital of Nanjing Medical University, clinical data of patients who experienced drug-induced anaphylaxis in the emergency infusion room between November 2019 and November 2023 were collected, including gender, age, history of previous adverse drug reactions, allergy history, Charlson comorbidity index, medication details, information related to drug-induced anaphylaxis (onset time, clinical manifestations), interventions, outcomes, and follow-up. The clinical characteristics and interventions in these patients were analyzed.Results:During the study period, a total of 398 772 patients in the emergency infusion room in our hospital received intravenous infusion of drugs. Of them, 625 cases developed adverse drug reactions (ADRs) and 75 cases developed drug-induced anaphylaxis, accounting for 0.02% (75/398 772) of the total infusion patients and 12.0% (75/625) of all ADR cases. Of the 75 patients with anaphylaxis, 30 cases (40%) were classified as grade Ⅱ, and 45 cases (60%) as grade Ⅲ, with no grade Ⅳ cases. The most common drugs involved in 75 cases of anaphylaxis were anti-infective drugs (41 cases, 54.7%). Drug-induced anaphylaxis exhibited diverse clinical manifestations, with cardiovascular symptoms being the most common, primarily varying degrees of transient hypotension (67 cases, 89.3%), followed by systemic and neurological symptoms, including profuse sweating (31 cases, 41.3%) and dizziness (28 cases, 37.3%). All 75 patients with anaphylaxis were treated with measures such as discontinuation of medication, replacement of infusion sets, rapid assessment of circulation and respiration, and monitoring of vital signs, of which 65 (86.7%) received rapid intravenous infusion for volume expansion, 6 (8.0%) received intravenous injection of glucocorticoids, 3 (4.0%) received intramuscular injection of 0.5 mg epinephrine, and 2 (2.7%) received antihistamines. All 75 patients showed improvement in symptoms, and no sequelae or deaths were found.Conclusions:In the emergency infusion room, the severity of anaphylaxis is mainly grade Ⅱ and Ⅲ with a good prognosis after timely intervention. The treatment measures mainly focus on rapid intravenous infusion for volume expansion, and the use of epinephrine is relatively low.

OBJECTIVES: To investigate the clinical effect of Er:YAG laser combined with ethylenediamine tetra acetic acid (EDTA) on three-walled periodontal intrabony defects adjacent to implant sites. METHODS: A total of 30 patients with three-walled periodontal intrabony defects adjacent to implant sites were treated with the combination therapy. Patients with three-walled intrabony defects were divided into two groups according to the depth of the intrabony pocket between the implant and natural teeth. Evaluation of wound healing was performed 10 days after the operation, and bone augmentation was evaluated 6 months after the operation. RESULTS: Primary healing in group 1 was 92.31%, primary healing in group 2 was 82.35%. No significant difference was observed between the two groups ( CONCLUSIONS The effect of bone augmentation with combination therapy was more ideal in group 2 than in group 1. Implant placement with combination therapy may be a viable technique to reconstruct three-walled intrabony defects due to the space maintenance provided by implants and bone grafts and the good root surface biocompatibility provided by the Er:YAG laser and EDTA.
Acetic Acid ; Alveolar Bone Loss ; Dental Implants ; Ethylenediamines ; Follow-Up Studies ; Guided Tissue Regeneration, Periodontal ; Humans ; Lasers, Solid-State ; Periodontal Attachment Loss ; Treatment Outcome

OBJECTIVE: To establishment the Sense of Security Scale for Medical Staff and test its reliability and validity. METHODS: The pre-test version scale was formulated through methods of literature review, semi-structured interviews with clinical medical staff, discussion with members of research groups, and consultation with medical experts. A total of 350 and 403 medical staff who worked in a tertiary A hospital in Guangdong Province were selected as the prediction and the verification samples, respectively, by convenience sampling method. The reliability and validity of the final version scale were tested by item analysis, exploratory factor analysis and confirmatory factory analysis. RESULTS: Through item analysis, it was determined that the scale was mainly composed of 24 items. Exploratory factory analysis extracted five characteristics: environmental factors, patient factors, self factors, organizational management, and social support, that explained 72.8% of the total variation. The results of confirmatory factory analysis showed that the ratio of chi-square to degree of freedom was 2.851, the mean square error of approximation was 0.068, the standardized mean square residual was 0.078, the goodness of fit index was 0.883, the normative fit index was 0.904, the comparative fit index was 0.935, the non-standard fitting index was 0.924, and the incremental fitting index was 0.936. The results of reliability and validity test showed that the total Cronbach alpha coefficient, Spearman-Brown coefficient and retest reliability were 0.939, 0.967 and 0.808, respectively. The item reliability of each item was 0.420-0.814, the composite reliability was 0.775-0.920, the content validity ratio was 0.904, the convergent validity was 0.514-0.741, and the discriminative validity was 0.717-0.861. CONCLUSION: The reliability and validity of each dimension of the Sense of Security Scale for Medical Staff is good, and it can be used as an evaluation tool to measure the sense of security in medical staff.

Objective:To optimize the decoction process of Digda-4 decoction(DGD-4D), and provide reference for the standardization study of decoction of Mongolian medicine decoction. Method:Taking DGD-4D as model drug, different decoction methods of Mongolian medicine were compared, HPLC was used to determine contents of aesculetin, geniposide, picroside Ⅰ and picroside Ⅱ.On the basis of single factor tests, central composite design-response surface methodology was adopted to optimize the decoction process of DGD-4D with transfer rates of 4 components and dry extract rate as indexes, regression model fitting was carried out by Design-Expert 8.0.6 software, prediction model of process parameters was established, and the optimal process was verified. Result:The optimal decoction condition of DGD-4D was determined to be adding 40 times the amount of water and decocting for 17 min, decocting once.Transfer rates of aesculetin, geniposide, picroside Ⅰ, picroside Ⅱ and dry extract rate were 70.01%, 94.11%, 61.23%, 92.32%, 32.89%, respectively. Conclusion:The optimum decoction process of DGD-4D is established, it has important reference significance for excavating, sorting, improving the level of Mongolian medicine preparations and ensuring the consistency of their clinical efficacy.

To establish the high performance liquid chromatography (HPLC) fingerprint for Digeda-4 decoction (DGD-4D), determine the contents of aesculetin, geniposide, picroside Ⅰ, picroside Ⅱ and ellagicacid in DGD-4D, and provide the scientific foundation for quality control of DGD-4D. The analysis was performed on Diamonsil(2) C₁₈ (4.6 mm×250 mm,5 μm) column, with methanol-0.1% phosphoric acid aqueous solution as mobile phase for gradient elution. The flow rate was 1.0 mL·min⁻¹; injection size was 10 μL; temperature was maintained at 30 °C, and the detection wavelength was set at 254 nm. The common mode of DGD-4D HPLC fingerprint was established, and the hidden information was analyzed by Chemometrics. Chromatographic peaks for DGD-4D were identified by HPLC and quantitative analysis was conducted for characteristic peaks. There were 17 common peaks in the fingerprints and the similarity of the fingerprints was over 0.9 in all 15 batches. The samples were broadly divided into four kinds by principal component analysis and clustering analysis. Four marker compounds were verified by partial least squares discriminant analysis, and No. 9, 12 and 14 peaks were identified as geniposide, picroside Ⅱ, and picroside Ⅰ respectively. The average recoveries were in the range of 95.91%-97.31%. The HPLC fingerprint method for content determination is reliable, accurate, rapid, simple, and reproducible, and can be used as one of the effective methods to control the quality of DGD-4D.
Chromatography, High Pressure Liquid ; Cinnamates ; Drugs, Chinese Herbal ; analysis ; standards ; Iridoid Glucosides ; Iridoids ; Methanol ; Principal Component Analysis ; Quality Control

Objective To investigate differences in the expression of Ras 1,Rac1 and Rho1 genes between yeast and hyphal phases of Trichosporon asahii (T.asahii),and to explore their roles in the formation of hyphae.Methods The yeast phase and hyphal phase of T.asahii were cultured and served as yeast phase group and hyphal phase group respectively.Total RNA was extracted from the 2 groups,and real -time fluorescence-based quantitative PCR (RT-PCR) was performed to measure the mRNA expression of Ras1,Rac1 and Rho1.Results The hyphal formation rate was significantly lower in the yeast phase group than in the hyphal phase group (0.40％ ± 0.53％ vs.99.33％ ± 0.57％,t =13.93,P ＜ 0.05).When the mRNA expression of Ras1,Rac1 and Rho1 in the yeast phase group was all set as 1,that in the hyphal phase group was 25.17 ± 10.99,16.81 ± 7.80,42.61 ± 18.50,respectively,with significant differences between the two groups in the three parameters (t =3.81,3.51,3.90,respectively,all P ＜ 0.05).Conclusion Ras1,Rac1 and Rho1 genes may participate in the regulation of hyphal formation in T.asahii.