Ecological cultivation is an important way for the sustainable production of traditional Chinese medicine in the context of the carbon peaking and carbon neutrality goals. Facility cultivation and simulative habitat cultivation modes have been developed and applied to develop the endangered Dendrobium huoshanense on the basis of protection. However, the differences in the greenhouse gas emissions and global warming potential of these cultivation modes remain unexplored, which limits the accurate assessment of carbon-friendly ecological cultivation modes of D. huoshanense. Greenhouse gas emission flux monitoring based on the static chamber method provides an effective way to solve this problem. Therefore, this study conducted a field experiment in the facility cultivation and simulative habitat cultivation modes at a D. huoshanense cultivation base in Dabie Mountains, Anhui Province. From April 2023 to March 2024, samples of greenhouse gases were collected every month, and the concentrations of CO_2, CH_4, and N_2O of the samples were then detected by gas chromatography. The greenhouse gas emission fluxes, cumulative emissions, and global warming potential were further calculated, and the following results were obtained.(1)The two cultivation modes of D. huoshanense showed significant differences in greenhouse gas emission fluxes, especially the CO_2 emission flux, with a pattern of facility cultivation>simulative habitat cultivation [(35.60±11.70)mg·m~(-2)·h~(-1) vs(2.10±4.59)mg·m~(-2)·h~(-1)].(2) The annual cumulative CO_2 emission flux in the case of facility cultivation was significantly higher than that of simulative habitat cultivation[(3 077.00±842.00)kg·hm~(-2) vs(221.00±332.00)kg·hm~(-2)], while no significant difference was found in annual cumulative CH_4 and N_2O emission fluxes.(3) The facility cultivation mode had a significantly higher global warming potential than the simulative habitat cultivation mode [(3 053.00±847.00)kg·hm~(-2) vs(196.00±362.00)kg·hm~(-2)]. Overall, the simulative habitat cultivation of D. huoshanense has obvious carbon-friendly characteristics compared with facility cultivation, which is in line with the concept of ecological cultivation of medicinal plants. This study is of great reference significance for the implementation and promotion of the ecological cultivation mode of D. huoshanense under carbon peaking and carbon neutrality goals.
Dendrobium/chemistry* ; Greenhouse Gases/metabolism* ; Carbon/analysis* ; Ecosystem ; Carbon Dioxide/metabolism* ; China ; Global Warming

Traditional Chinese medicine(TCM) solid waste is characterized by widespread availability, renewability, and substantial production volume. In the context of the "dual carbon" goals, the pyrolysis of TCM solid waste for producing fuel gas for recycling in pharmaceutical production has emerged as a crucial strategy for optimizing the energy structure in the TCM industry and developing renewable energy. This paper comprehensively reviews both internal and external factors that influence the pyrolysis of TCM solid waste. Internal factors encompass moisture content, particle size, ash content, and the morphology of the raw materials, while external factors include pyrolysis conditions, equivalence ratios, types of gasifiers, and gasifying agents. Furthermore, this paper details the challenges associated with the pyrolysis of TCM solid waste, such as the dispersion of feedstocks, the diversity of resources, the complexity of the pyrolysis process, and the variations in gasifier performance. Finally, this paper proposes measures to address these challenges. This paper aims to provide insights into the development of a circular economy for TCM resources and the advancement of low-carbon energy utilization in the TCM industry.
Pyrolysis ; Carbon/chemistry* ; Medicine, Chinese Traditional ; Solid Waste/analysis* ; Drugs, Chinese Herbal/chemistry* ; Gases/chemistry*

Objective:To analyze the efficacy, influencing factors, and risk warning of multi-plane low-temperature plasma radiofrequency ablation（MLT-RFA） in the treatment of obstructive sleep apnea hypopnea syndrome（OSAHS）. Methods:A total of 118 OSAHS patients admitted from October 2022 to June 2024 were selected as the research subjects. They were divided into mild group（n=46）, moderate group（n=52）, and severe group（n=20） according to the severity of their condition. MLT-RFA treatment was used for all patients. After surgery, the results of polysomnography（PSG） and the changes in the Calier Sleep Apnea Quality of Life Index（SAQLI） were observed before and after treatment. The incidence of complications after treatment was recorded, and the clinical efficacy of the patients was evaluated. At the same time, they were divided into a treatment effective group（n=106） and an ineffective group（n=12） according to their effects. The general clinical data of the two groups were compared, and binary logistics regression analysis was conducted to identify independent factors that affect treatment efficacy and construct a model. ROC curve analysis was used to evaluate the diagnostic efficacy of the model. Results:The treatment effectiveness rate of the mild group was 93.48%, the moderate group was 90.38%, and the severe group was 80.00%. There was no statistically significant difference in the treatment effectiveness rate among the three groups（P>0.05）. The AHI of the mild group, moderate group, and severe group increased sequentially, while the LSaO2and SAQLI scores decreased sequentially. After treatment, the AHI of all three groups decreased compared to before treatment, while the LSaO2and SAQLI scores increased compared to before treatment, and the differences were statistically significant（P<0.05）. The pre-treatment AHI of the effective group was lower than that of the ineffective group, and the pre-treatment LSaO2and SAQLI were higher than those of the ineffective group, with statistically significant differences（P<0.05）. Pre-treatment LSaO2and pre-treatment SAQLI are independent factors affecting the efficacy of MLT-RFA（P<0.05）. The AUC of pre-treatment LSaO2, pre-treatment SAQLI, and combined prediction were 0.907, 0.763, and 0.947, respectively, with sensitivities of 0.896, 0.840, and 0.917, and specificities of 0.833, 0.667, and 0.887, respectively. Conclusion:MLT-RFA has a significant effect on the treatment of OSAHS, and the AHI, LSaO2, and SAQLI of patients before treatment can predict the treatment effect, with LSaO2 and SAQLI being independent influencing factors. The combinerd prediction model exhibits high diagnostic efficiency, sensitivity, and specificity.
Radiofrequency Ablation/methods* ; Plasma Gases ; Sleep Apnea, Obstructive/surgery* ; Polysomnography ; Postoperative Complications/epidemiology* ; Quality of Life ; Severity of Illness Index ; Treatment Outcome ; Humans

As global greenhouse gases continue rising, the urgency of more ambitious action is clearer than ever before. China is the world's biggest emitter of greenhouse gases and one of the countries affected most by climate change. The evidence about the impacts of climate change on the environment and human health may encourage China to take more decisive action to mitigate greenhouse gas emissions and adapt to climate impacts. This article aimed to review the evidence of environmental damages and health risks posed by climate change and to provide a new science-based perspective for the delivery of sustainable development goals. Over recent decades, China has experienced a strong warming pattern with a growing frequency of extreme weather events, and the impacts of climate change on China's environment and human health have been consistently observed, with increasing O ₃ air pollution, decreases in water resources and availability, land degradation, and increased risks for both communicable and non-communicable diseases. Therefore, China's climate policy should target the key factors driving climate change and scale up strategic measures to curb carbon emissions and adapt to inevitable increasing climate impacts. It provides new insights for not only China but also other countries, particularly developing and emerging economies, to ensure climate and environmental sustainability whilst pursuing economic growth.
Climate Change ; China ; Humans ; Greenhouse Gases ; Air Pollution ; Sustainable Development ; Environment

The current linear economy model relies on fossil energy and increases CO₂ emissions, which contributes to global warming and environmental pollution. Therefore, there is an urgent need to develop and deploy technologies for carbon capture and utilization to establish a circular economy. The use of acetogens for C1-gas (CO and CO₂) conversion is a promising technology due to high metabolic flexibility, product selectivity, and diversity of the products including chemicals and fuels. This review focuses on the physiological and metabolic mechanisms, genetic and metabolic engineering modifications, fermentation process optimization, and carbon atom economy in the process of C1-gas conversion by acetogens, with the aim to facilitate the industrial scale-up and carbon negative production through acetogen gas fermentation.
Fermentation ; Gases/metabolism* ; Carbon Dioxide/metabolism* ; Metabolic Engineering ; Carbon/metabolism*

C1 gases including CO, CO₂ and CH₄, are mainly derived from terrestrial biological activities, industrial waste gas and gasification syngas. Particularly, CO₂ and CH₄ are two of the most important greenhouse gases contributing to climate change. Bioconversion of C1 gases is not only a promising solution to addressing the problem of waste gases emission, but also a novel route to produce fuels or chemicals. In the past few years, C1-gas-utilizing microorganisms have drawn much attention and a variety of gene-editing technologies have been applied to improve their product yields or to expand product portfolios. This article reviewed the biological characteristics, aerobic or anaerobic metabolic pathways as well as the metabolic products of methanotrophs, autotrophic acetogens, and carboxydotrophic bacteria. In addition, gene-editing technologies (e.g. gene interruption technology using homologous recombination, group Ⅱ intron ClosTron technology, CRISPR/Cas gene editing and phage recombinase-mediated efficient integration of large DNA fragments) and their application in these C1-gas-utilizing microorganisms were also summarized.
Gene Editing ; Gases ; Carbon Dioxide ; Genetic Engineering ; Cloning, Molecular

Objective: To explore the occupational hazards caused by three kinds of welding operations, and to provide data support for individual protection. Methods: In October 2020, the welding fumes, metal elements and welding arc generated by three welding operations of argon gas shielded welding (JS80 welding wire) , manual welding (ZS60A welding rod) and carbon dioxide shielded welding (907A flux cored wire) were collected and measured in the welding laboratory. The samples were analyze and compare in the laboratory, and the differences of the occupational hazard factors of the three welding operations were judged. Results: The concentration of welding fume produced by carbon dioxide shielded welding, manual welding (ZS60A electrode) , and argon gas shielded welding (JS80 welding wires) were 6.80 mg/m(3), 6.17 mg/m(3), and 3.13 mg/m(3), respectively. The effective irradiance of the welding arc outside the welding mask from high to low is manual welding (ZS60A electrode) , carbon dioxide shielded welding (907A flux-cored welding wire) , and argon shielded welding (JS80 welding wire) , respectively 1 010.7, 740.9, 589.5 μW/cm(2). The long-wave ultraviolet UVA intensity generated by argon shielded welding (JS80 welding wire) is the largest, which is 1 500 μW/cm(2). The content of Mn in the three welding operations is the highest, and JS80 welding wire has the highest Mn content of 128493.2 mg/kg. 907A flux cored wire has the highest Ti content, which is 24355.5mg/kg. The electrode ZS60A has the highest Cu content, which is 24422.12 mg/kg. Conclusion: The intensity of occupational hazards is different in the three kinds of welding operations, so the methods of personal protective equipment, field exposure assessment and health monitoring should be more targeted.
Air Pollutants, Occupational/analysis* ; Argon/analysis* ; Carbon Dioxide/analysis* ; Gases/analysis* ; Occupational Exposure/analysis* ; Welding/methods*

Objective: To examine the trend of the burden on chronic obstructive pulmonary diseases (COPD) and epidemiologic transition on related risk factors among the Chinese population from 1990 to 2019. Methods: Based on the data from the Global Burden of Disease 2019 Study, we used the indicator numbers such as disability-adjusted life year (DALY), years of life lost (YLD), years lived with disability (YLL), and prevalence rate to describe the changes of COPD burden stratified by different sex and age groups from 1990 to 2019. We applied population attribution faction (PAF) to analyze the burden attributed to risk factors and epidemiological transition. Results: In 2019, the age-standard rate for DALY, YLD, and YLL and prevalence rate for COPD were 1 102.77/100 000 population,862.37/100 000 population, 240.40/100 000 population, and 2 404.41/100 000. Both age-standardized DALY and YLL rates for COPD in males were higher than in females, except for the YLD rate in females. COPD's top five risk factors were particulate matter pollution, smoking, occupational particulate matter, gases, and fumes, low temperature, and secondhand smoke. Smoking surpassed environmental particulate pollution in 1994 and became the first factor causing the disease burden of COPD. Since then, the order of risk factors has not changed. The PAF of environmental particulate pollutants increased by 1.78% annually, from 15.22% in 1990 to 25.37%, and the PAF of household air pollution from solid fuels decreased by 5.59% annually, from 40.30% in 1990 to 7.59%. Conclusions: From 1990 to 2019, the per person health loss caused by COPD in China showed an overall downward trend. The PAF of relevant risk factors has also changed, the importance of environmental factors is relatively declined, and the status of smoking and other related risk behaviors has become increasingly prominent. The prevention and control of COPD can focus on screening high-risk groups (≥40 years old, smoking, heavy air pollution, having occupational exposure), smoking cessation, and environmental treatment.
Female ; Male ; Humans ; Adult ; Cost of Illness ; Pulmonary Disease, Chronic Obstructive/epidemiology* ; Air Pollution/adverse effects* ; Particulate Matter ; China/epidemiology* ; Dust ; Gases

As a convenient and effective surface modification approach, non-thermal atmospheric pressure plasma (NTAPP)can be used to improve dentin bonding, and has recently become a research focus. Studies have shown that NTAPP can alter dentin surface properties, improve the penetration and polymerization of adhesives, stimulate the cross-linking of collagen, and change the micro-morphology and element content of dentin surface, thus improve the dentin bonding quality. This article introduces the current research progress in the application of NTAPP in the field of dentin bonding, in order to provide innovative information for future research in optimization of the quality of dentin bonding.
Dental Bonding ; Dental Cements ; Dentin ; Dentin-Bonding Agents ; Materials Testing ; Plasma Gases ; Resin Cements ; Surface Properties

Objective To determine the relationship between air pollutants [SO
Acne Vulgaris ; Air Pollution/adverse effects* ; China/epidemiology* ; Environmental Pollutants ; Female ; Gases ; Humans ; Male ; Outpatients