Objective: Data on syncopal donation-related vasovagal reaction (DRVR) collected from 74 blood centers between 2020 and 2023 was statistically analyzed to provide a reference for developing preventive strategies against syncopal DRVR. Methods: Data on blood donation adverse reactions and basic information of donors from 2020 to 2023 were collected through the information management system at monitoring sentinel sites. Statistical analysis was performed on the following aspects of syncopal DRVR: characteristics of donors who experienced syncope, reported incidence, triggers, duration, presence and occurrence time of syncope-related trauma, clinical management including outpatient and inpatient treatment, and severity grading. Results: From 2020 to 2023, 45 966 donation-related adverse reactions were recorded. Of these, 1 665 (3.72%) cases were syncopal DRVR. The incidence of syncopal DRVR decreased with age, being the highest in the 18-22 age group. Incidence was significantly higher in female donors than male donors, in first-time donors than repeat donors, and in university and individual donors than group donors (all P<0.05). There was no statistically significant difference among different blood donation locations (P>0.05). The top three triggers were tension, fatigue, and needle phobia or fear of blood. Among syncopal DRVR cases, 60.36% occurred during blood collection, 87.63% lasted for less than 60 seconds, and 5.05% were accompanied by trauma. Notably, 57.14% of these traumas occurred after donor had left the blood collection site. Syncope severity was graded based on required treatment: grade 1 (fully recovered without treatment, 95.50%); grade 2 (recovered after outpatient treatment, 4.02%); and grade 3 (recovered after inpatient treatment, 0.48%). Conclusion: By analyzing the data of syncopal DRVR cases, it is possible to provide a reference for formulating blood donor safety policies.

Objective To predict and verify the mechanism of Naoan capsules(NAC)in treatment of ischemic stroke(IS)by network pharmacology,Gene Expression Omnibus(GEO)database,and molecular docking technology.Methods The active components in NAC were collected using the Traditional Chinese Medicine System Pharmacological Analysis Platform,and the disease-related differential genes were screened using GEO database.After screening and obtaining the common targets of the two,the compound disease network was constructed by Cytoscape 3.8.2 software.At the same time,protein-protein interaction networks were created to identify candidate targets for NAC treatment of IS,and gene ontology and Kyoto encyclopedia of genes and genomes enrichment analyses were performed.Finally,core targets were verified by molecular docking technology.Results A total of 56 candidate compounds and 18 544 disease-related differential genes were screened.Further,quercetin,kaempferol,luteolin and baicalein were found to be the key active compounds of NAC in the treatment of IS through the compound disease network.In the search of PPI network core,eight key targets for NAC treatment of IS were screened,including mitogen-activated protein kinase 1(MAPK1),B-cell lymphoma factor 2(Bcl-2),cysteinylaspartate specific protease 3(CASP3),etc.In addition,the key pathways of NAC treatment of IS are mainly concentrated in lipid and atherosclerosis,advanced glycation end products and receptor for advanced glycation end products(AGE-RAGE),tumor necrosis factor(TNF),interleukin17(IL-17),C-type lectin receptor,apoptosis,hypoxia-inducing factor-1(HIF-1),MAPK and other signaling pathways.Finally,the molecular docking results showed that the key active compounds(quercetin,kaempferol,luteolin and baicalein)had good binding force with the 8 key targets,which initially verified the results of network pharmacology.Conclusion NAC plays a role in the treatment of IS through multi-component,multi-target and multi-pathway.

BACKGROUND:The treatment of distal tibial fractures with soft tissue injury has always been challenging,and the new retrograde tibial nailing is a new choice.Up to now,there were few reports on the biomechanical properties between the new retrograde tibial nailing,anterograde intramedullary nailing and supercutaneous locking plate. OBJECTIVE:To explore the biomechanical stability of new retrograde tibial nailing,antegrade intramedullary nailing and supercutaneous locking plate in the treatment of distal tibial fractures with soft tissue injury using finite element analysis so as to offer a scientific foundation for clinical application. METHODS:The finite element model of transverse distal tibia fracture was established by relevant software utilizing the CT data of the tibia from a 42-year-old healthy male.Retrograde tibial nailing,antegrade intramedullary nailing and supercutaneous locking plate finite element models were assembled under the principle of fracture fixation.Finally,meshing,applying loads,and data processing were accomplished with the ANSYS 2019 software.Moreover,the stress distribution and displacement of the tibia and internal fixation of each model were compared. RESULTS AND CONCLUSION:(1)The displacement of fracture end in the three groups increased with the increase of load.In all mode loads,the average displacement of the fracture end was the least in the retrograde tibial nailing group,followed by the supercutaneous locking plate group,and the highest in the antegrade intramedullary nailing group.At 800 N vertical load,the displacement difference of the fracture end was statistically significant(P<0.05).There was no statistical significance in other load modes.(2)Under different loads,the tibial stress in the three groups was the highest in the middle of the tibia,and gradually decreased to the proximal and distal ends.The stress distribution of the tibial shaft was the highest in the retrograde tibial nailing group,followed by the supercutaneous locking plate group,and the least in the antegrade intramedullary nailing group.(3)Under different loads,the stress of the tibial stress raiser in the three groups was significantly higher in the supercutaneous locking plate group than in the other two groups,with statistical significance(P<0.05).(4)Under different loads,the stress of the fixators in the three groups was the largest in the supercutaneous locking plate group,followed by the retrograde tibial nailing group,and the minimum in the antegrade intramedullary nailing group.There were significant differences in the stress of fixator stress raiser among the three groups under different loading modes(P<0.05).(5)It is indicated that all three fixation methods have the good anti-rotation ability and axial stability.Retrograde tibial nail shows better biomechanical stability.

To establish a method for determining 26 inorganic elements in earthworm polypeptide and determine the elemental content in different batches of earthworm polypeptide, microwave digestion method was used to pre-treat the samples, and ICP-MS method was used to determine the content of 26 elements in different batches of earthworm polypeptide. The linear relationships of 26 elements were good in the range of 0-1 000 μg·L^-1, with R² greater than 0.999, precision RSD 0.21%-2.71%, repeatability RSD 0.19%-4.69%, stability RSD 0.11%-4.24%, and recovery rates of 82.41%-116.16%. The data was plotted using Origin 2022 software to characterize the distribution of elements content. SPSS 27.0 was used for principal component analysis, and SIMCA 14.1 software was used for OPLS-DA analysis. The results showed that among the 26 elements, the higher content of earthworm polypeptide was K, Na, and Ca, followed by Zn, Fe, Al, B and other trace elements, In, Sc, Co, Pb, Bi and other elements had little or no detectable content, and there were differences in the content of polypeptide in different batches. This study provides a theoretical basis for the production quality control, quality evaluation and drug efficacy application of earthworm polypeptide through the determination and analysis of the elements and content of earthworm polypeptide.

Ten compounds were isolated and purified from the dichloromethane extract of stems of Ephedra intermedia by various chromatographic methods. Based on the analysis of physicochemical properties and spectral data, the structures of the ten compounds were identified as 1-allyl-3,4-dimethoxy-benzene-5-O-β-D-glucopyranoside (1), lyoniresinol (2), secoisolariciresinol (3), 4,3′,4′-trihydroxy-3-methoxylignan-9,9′-diyldiacetate (4), dehydroconiferyl alcohol (5), isocubebin (6), balanophonin B (7), sesquipinsapol B (8), crataegifin A (9), 1-(2-(4-hydroxy-3-methoxyphenyl)-3-(hydroxymethyl)-7-methoxy-2,3-dihydrobenzofuran-5-yl)ethan-1-one (10). Compound 1 is a new compound, named as 1-allyl-3,4-dimethhoxy-benzene-5-O-β-D-glucopyranosyl, compounds 2-10 are lignans and isolated from this plant for the first time. Compound 3, 4, 8 possess potentially anti-asthmatic activities.

OBJECTIVE To establish the quality standards of medicinal materials in light of related methods in the general principles of part four of Chinese Pharmacopoeia(2020 Edition), and to conduct systematic research on the Tibetan medicine "Yajima"(Chrysosplenium axillare). METHODS The powder characteristics of medicinal materials were described by microscopic identification method. Silica gel GF254 thin-layer plate was employed to establish a TLC identification method with 5-O-demethylapulein and oxyayanin A as reference substances. Loss on drying, total ash, acid-insoluble ash and ethanol-soluble extractives of 10 batches of Chrysosplenium axillare were determined according to the general principles of part four of Chinese Pharmacopoeia(2020 Edition). HPLC was used to establish the characteristic chromatogram of Chrysosplenium axillare, and the content determination method was established with chrysosplenoside I(CI) and chrysosplenoside A(CA) as the quality control index components of Chrysosplenium axillare. RESULTS The water content, total ash, acid-insoluble ash, ethanol-soluble extractive and the content of CI and CA of all samples varied in the ranges of 9.17%−12.52%, 14.11%−16.74%, 1.50%−4.72%, 32.77%−40.30%, 0.30%−0.99% and 0.28%−0.88%, respectively. CONCLUSION The identification and content determination methods of Yajima(Chrysosplenium axillare) are established for the first time. The methods are easy to operate and exclusive, which is of great significance to accurately evaluate the internal quality of medicinal materials and ensure the quality of drug used.

BACKGROUND:The treatment of distal tibial comminuted fractures with soft tissue injury has always been challenging.The new retrograde tibial nailing and supercutaneous locking plate are important treatment methods,but their strain and stress shielding at the fracture end during different periods of fracture healing and different load conditions have not been reported. OBJECTIVE:To explore the biomechanical stability of retrograde tibial nailing and supercutaneous locking plate in different periods of fracture healing by finite element analysis to offer a scientific foundation for clinical application and rehabilitation exercise. METHODS:The finite element model of distal tibial comminuted fracture was established by utilizing the CT data of the tibia from a 40-year-old healthy male.Retrograde tibial nailing,supercutaneous locking plate,and callus models were assembled in accordance with the principle of fracture fixation.The finite element analysis was performed using ANSYS software to compare the displacement of the fracture end,the stress shielding of the tibia,the stress of the callus,and the stress distribution of the tibia and the fixation device during different periods of fracture healing. RESULTS AND CONCLUSION:(1)The relative displacement of the tibial fracture decreased gradually with the healing of the fracture,and the displacement decreased significantly after 3 months.At 0 and 1 months after operation,the vertical displacement and total displacement of the supercutaneous locking plate group were higher than those in the retrograde intramedullary nail group.The Z-axis displacement(horizontal medial and lateral displacement)of the two fixation methods was more obvious than the X-axis and Y-axis,and the Z-axis displacement of supercutaneous locking plate group was the most obvious.The maximum Z-axis displacement of the two fixation methods was located on the outside of the tibia,and the minimum displacement was located on the inside of the tibia.(2)The stress shielding rate at different periods of fracture healing gradually decreased with time.The stress shielding rate of the retrograde intramedullary nail was higher than that of the supercutaneous locking plate at different stages of fracture healing.After 3 months,the stress shielding rate of the supercutaneous locking plate was reduced to about 4%,and the stress shielding rate of the retrograde intramedullary nail was reduced to about 40%.(3)The stress of the stress concentration site of the callus in the two fixation methods increased with the increase of the load,and the stress of the callus in the supercutaneous locking plate group was always greater than that in the retrograde intramedullary nail group.The maximum stress distribution of the callus was approximately equally distributed among the two modes of fixation,both in the lateral portion of the tibia.(4)As the fracture healed,the maximum stress of the tibia in the two groups decreased gradually,and the stress in the supercutaneous locking plate group was always greater than that in the retrograde intramedullary nail group.The average stress of the maximum stress area of the tibia in the supercutaneous locking plate group under 1 500 N load was 285 MPa,while that in the retrograde intramedullary nail group was 26 MPa.(5)As the fracture healed,the stress of the fixation device in the two groups decreased gradually,and the stress in the supercutaneous locking plate group was significantly higher than that in the retrograde intramedullary nail group.After 3 months,the stress of the two fixation devices decreased significantly.(6)It is indicated that in the early stage of fracture healing,the strain on the fracture end in the retrograde intramedullary nail group is small,and the maximum stress of the tibia is moderate,allowing early loaded.The fractured ends in the supercutaneous locking plate group had too large strain and too large maximum stress of the tibia,which needed to be partially loaded under protection and could not be fully loaded.In the middle and late stages of fracture healing,the tibial retrograde intramedullary nail and the supercutaneous locking plate could be completely loaded,and the stress shielding rate of the supercutaneous locking plate was significantly lower than the tibial retrograde intramedullary nail.

The structure and working principle of the multi-leaf collimator(MLC)optical system of Elekta linear accelerator were introduced.The causes for the faults of the MLC optical system were analyzed,and the fault repair and maintenance of the MLC optical system were summarized.References were provided for medical engineers to repair and maintain the MLC optical system.[Chinese Medical Equipment Journal,2024,45(1):76-83]

Objective To investigate the effect of early postoperative abnormal blood glucose on the short-term prognosis of non-small cell lung cancer(NSCLC),and to analyze the clinical characteristics and risk factors related to poor early prognosis.Methods A total of 897 patients with NSCLC who underwent thoracoscopic surgery in Huadong Hospital,Fudan University from Jan 2020 to Aug 2021 were divided into hyperglycemia(HG)group(>7.8 mmol/L)and normal blood glucose(NG)group(≤7.8 mmol/L and≥3.9 mmol/L)according to the early postoperative blood glucose values.Additionally,the patients were divided into higher blood glucose fluctuation group(≥4 mmol/L)and the group with lower blood glucose fluctuation(<4 mmol/L)basing on the fasting blood glucose.Using Logistic regression models,column line charts,ROC curves and other methods,we aimed to clarify the impact of early postoperative blood glucose abnormalities on short-term prognosis,explore clinical characteristics associated with poor short-term outcomes,identify other high-risk factors,and establish relevant risk prediction models.Results Compared with the NG group,the incidence of postoperative pneumonia,thromboembolism,ICU admission rate,total length of hospital stay and hospital cost were significantly higher in the HG group(P<0.05).Higher blood glucose fluctuation group had a greater risk of ICU admission(P=0.003).Logistic regression analysis showed that age,preoperative fasting glucose,white blood cell count and cytokeratin 19 fragment antigen 21-1(CYFRA21-1)were risk factors for postoperative hyperglycemia(P<0.05).Contrary to the effect of BMI,diabetes,male patients,higher blood glucose fluctuation,white blood cell count and age were the risk factors for postoperative adverse events(P<0.05).The AUC of the column line chart model was 0.661(95%CI:0.624-0.698),indicating good discriminative ability for predicting poor short-term prognosis postoperatively.Calibration curves also demonstrated good consistency between predicted and actual probabilities.Conclusion Early postoperative blood glucose fluctuations independently impact the short-term prognosis of thoracoscopic NSCLC patients.Blood glucose combined with gender,BMI,white blood cell count,age and diabetes history can serve as predictive factors for poor short-term prognosis postoperatively.Additionally,a column line chart constructed based on these factors may aid clinicians in early intervention for NSCLC patients with indications.

As interstitial collagen,type Ⅲ collagen(Col Ⅲ)does not express in normal glomeruli.However,in Col Ⅲ nephropathy,a large amount of Col Ⅲ deposit in the mesangial and subendothelial area of the glomeruli.IgA nephropathy with Col Ⅲ deposition was extremely rare.In this article,we reported two cases of such disease.After treating with immunosuppressive agents or traditional Chinese medicine decoction,the renal function of the two patients remained stable and the urinary protein levels reduced significantly.