Sacroiliac complex injuries are commonly seen in high-energy pelvic fractures. The injuries make a big difference in treatment patterns due to the diverse injury types, posing considerable challenges in formulating optimal treatment strategies, and hence are persistent clinical difficulties in orthopedic trauma. The clinical management of sacroiliac complex injuries presents several key challenges such as a non-negligible rate of missed diagnoses in associated vascular and visceral injuries, absence of standardized protocols for surgical approaches and reduction-fixation strategies across different injury patterns, and ongoing controversies regarding surgical indications and optimal timing for patients combined with concomitant lumbosacral plexus injuries. Currently, no systematic clinical guidelines are available for the diagnosis and treatment of sacroiliac complex injuries both domestically and internationally. To this end, the Pelvic and Acetabular Surgery Group, Orthopedic Branch, China International Exchange and Promotive Association for Medical and Health Care and Orthopedic Physician Branch, Chinese Medical Doctor Association organized a panel of domestic experts in the field to develop the Clinical guideline for the diagnosis and treatment of sacroiliac complex injuries ( version 2025), based on evidence-based medicine and adhering to the principles of scientific rigor, clinical applicability, and innovation. These guidelines provided 11 recommendations covering diagnosis, therapeutic principles and techniques, management protocols for lumbosacral plexus injuries, outcome evaluation, and postoperative rehabilitation pathways, etc., aiming to standardize the clinical management of sacroiliac complex injuries.

Objective:To analyze the efficacy of phantom-less quantitative computer tomography (PL-QCT) for the diagnosis of osteoporosis in patients with lumbar degenerative diseases.Methods:From October 2021 to October 2023, a total of 1 248 patients with lumbar degenerative disease who did not receive anti-osteoporosis treatment in the Department of Spine Surgery, Tianjin Hospital were retrospectively analyzed. There were 520 males and 728 females, aged 62.31±9.37 years (range, 40-87 years), height 1.66±0.08 m (range, 1.43-1.89 m), weight 69.04±8.27 kg (range, 49-93 kg). The mean body mass index was 26.11±3.67 kg/m 2 (range, 14.40-37.11 kg/m 2). Dual-energy X-ray absorptiometry (DXA) and PL-QCT were used to diagnose osteoporosis, and the detection rates of the two diagnostic methods were compared. The receiver operating characteristic (ROC) curve of PL-QCT for the diagnosis of osteoporosis was drawn, the area under the curve (AUC) and 95% confidence interval (CI), sensitivity and specificity were calculated. Results:Among 1 248 patients with lumbar degenerative diseases, 626 (50.2%) were diagnosed as osteoporosis by PL-QCT, 423(33.9%) were diagnosed by spine DXA, 488(39.1%) were diagnosed by hip DXA and 539 patients(43.2%) were diagnosed by dual-site DXA. The detection rate of osteoporosis of PL-QCT was higher than that of spine DXA (χ 2=193.557, P<0.001), hip DXA (χ 2=322.201, P<0.001) and dual-site DXA (χ 2=94.683, P<0.001), and the difference was statistically significant. Taking the diagnostic results of spinal DXA for osteoporosis as a reference, the ROC curve of PL-QCT for the diagnosis of osteoporosis showed a sensitivity of 79%, a specificity of 81%, and an AUC and 95% CI of 0.82(0.79, 0.85). Taking the diagnostic results of hip DXA for osteoporosis as a reference, the ROC curve of PL-QCT for the diagnosis of osteoporosis showed a sensitivity of 85%, a specificity of 55%, and an AUC and 95% CI of 0.75(0.71, 0.78). Taking the diagnostic results of two-site DXA for osteoporosis as a reference, the ROC curve of PL-QCT for the diagnosis of osteoporosis showed a sensitivity of 72%, a specificity of 75%, and an AUC and 95% CI of 0.81(0.78, 0.83). Conclusion:Compared with DXA, PL-QCT has a higher detection rate of osteoporosis in patients with degenerative lumbar spine disease and good diagnostic efficacy.

Objective:To analyze the prevalence trends and epidemiological characteristics of cardiometabolic multimorbidity(CMM) in Beijing from 2005 to 2022.Methods:A series of representative cross-sectional surveys were conducted in Beijing between 2005 and 2022 using a stratified multistage cluster random sampling method. A total of 110 496 permanent residents aged 18-79 years participated in face-to-face interviews, physical examinations, and laboratory testing. Complex sampling logistic regression models were employed to identify factors associated with CMM, and Joinpoint regression was used to assess temporal trends in prevalence. Results:The prevalence of CMM was 22.3% in 2005 and 24.3% in 2022, with an average annual percent change of 0.1%(95% CI -1.3%-1.3%, P>0.05). In rural areas, the prevalence increased by 1.3% per year(95% CI 0.2%-2.6%, P<0.05), while among obese individuals, it decreased by 1.0% annually( P<0.05). The most common CMM patterns were hypertension combined with dyslipidemia(13.2%), hypertension combined with diabetes(7.0%), and diabetes combined with dyslipidemia(5.8%). The prevalence of hypertension and dyslipidemia comorbidity showed a long-term decline among females, those aged 60-79 and obese individuals( P<0.05). In contrast, the prevalence of hypertension and diabetes comorbidity increased over time in rural residents and individuals with normal body weight( P<0.05). Furthermore, diabetes and dyslipidemia comorbidity rates increased significantly among males, adults aged 18-59 years, those with a college education or above, rural residents and individuals with normal body weight( P<0.05). Multivariable logistic regression indicated that male, older age, overweight, obese, and lower education level were independently associated with a higher risk of CMM( P<0.05). Conclusion:From 2005 to 2022, the prevalence of CMM remained high among adults in Beijing. While prevalence decreased among obese individuals, it increased significantly in rural areas. Hypertension combined with dyslipidemia was the most common multimorbidity pattern throughout the study period.

Turning to critical illness is a common stage of various diseases and injuries before death. Patients usually have complex health conditions, while the treatment process involves a wide range of content, along with high requirements for doctor′s professionalism and multi-specialty teamwork, as well as a great demand for time-sensitive treatments. However, this is not matched with critical care professionals and the current state of medical care in China. Telemedicine, which shortens the distance of medical professionals and the gap of disease diagnosis and treatments in various regions through electronic information, can effectively solve the current problem. Therefore, there is an urgent need to develop a standardized, high-quality visualization telemedicine round system .Therefore, experts have been organized to search domestic and foreign literature on telemedicine round for critically ill patients and to form this consensus based on clinical experiences so as to further improve the level of critical care treatments in regions.

Objective:To construct a thyroid nodule segmentation model using ultrasound dynamic images and explore its potential for assisting in the screening of thyroid nodules.Methods:A total of 126 patients with thyroid nodules（comprising 150 nodules）who were diagnosed and treated at Xuzhou Cancer Hospital from April 2024 to December 2024 were prospectively enrolled. Two-dimensional ultrasound was performed to capture short-axis and long-axis video images of thyroid nodules，forming a dynamic ultrasound image dataset. The dataset was divided into training，validation，and test sets in a ratio of 6∶1∶3. After the training loss curve converged，the model that performed well on the validation set was selected for testing. Three-fold cross-validation was employed for training and testing. All 300 ultrasound videos were divided into three subsets. In each experiment，two subsets were used as the training set，and one subset was used as the test set to evaluate the model's generalization ability. A collaborative spatiotemporal diffusion model was established based on the dynamic trends and tissue texture details of thyroid nodules. Six widely used segmentation metrics were employed to evaluate the model's application capabilities.Results:The study included 126 patients with 150 thyroid nodules，300 dynamic ultrasound images，and video lengths of 3-4 seconds per nodule，resulting in 12 312 segmented images. The size of the thyroid nodules was（10.7 ± 10.6）mm（transverse diameter）×（8.4 ± 6.3）mm（anteroposterior diameter）. Among the nodules，62（41.3%）had clear boundaries，while 88（58.7%）had indistinct boundaries；61（40.7%）exhibited regular shapes，while 89（59.3%）were irregular；66（44.0%）had a taller-than-wide aspect ratio；and 70（46.7%）showed microcalcifications. The collaborative diffusion model based on dynamic ultrasound image segmentation achieved the following scores：a Jaccard score of（69.22 ± 0.03）%，a Dice score of（79.16 ± 0.18）%，a Precision score of（86.70 ± 0.17）%，a Recall score of（77.82 ± 0.04）%，an Sα score of（85.26 ± 0.01）%，and an Eθmn score of（90.58 ± 0.17）%. Compared to other models，this model demonstrated significant improvements across all evaluation metrics，achieving the highest values in each metric with increments of over 8% and 1%，respectively. Conclusions:The collaborative diffusion model with a dynamic controller，constructed based on dynamic ultrasound images of thyroid nodules，demonstrates excellent performance in ultrasound image segmentation. It improves the accuracy of thyroid nodule screening，thereby providing a valuable auxiliary diagnostic tool for clinical practice.

BACKGROUND:The types of acetabular double-column fractures are complex and common.At present,the traditional reconstructed bone plates are used to treat the double-column fractures,and the mismatch between them and the bone surface will increase the difficulty of surgery.Personalized bone plate can realize the adhesion of bone plate and bone surface,but the biomechanical comparison between personalized bone plate and traditional reconstructed bone plate in fixation of acetabular double column fracture is few,and the simulated posture is relatively simple.OBJECTIVE:Three-dimensional finite element method was used to analyze the biomechanical characteristics of different internal fixation methods of complex acetabular double-column fractures in various positions,providing the necessary biomechanical basis for clinical application.METHODS:The most representative two-column fracture model of complex acetabular fractures involving square area was established.A three-dimensional finite element model was established for the fixation of complex acetabular double-column fractures by four different internal fixation methods:special-shaped titanium plate fixation(group A),anterior and posterior column double titanium plate fixation(group B),anterior column reconstruction titanium plate+posterior column lag screw fixation(group C),and anterior column reconstruction titanium plate+subacetabular screw fixation(group D).Four kinds of complicated acetabular double-column fracture models with different internal fixation were simulated in the position of sitting,standing,affected side extension,affected side abduction,and affected side standing on one leg.The biomechanical properties of the four internal fixation methods were compared.RESULTS AND CONCLUSION:(1)The node displacement and mean displacement on fracture line were presented as group A＜group B＜group C＜group D in all postures.The displacement value in the one-leg standing position on the affected side was the largest compared with other postures,and the maximum displacement of the internal fixation system in group A was the smallest among the four models.There was no significant difference between the four groups in the standing position and the one-legged standing position(P＞0.05).In the position of sitting,affected side extension,and affected side abduction,there was no significant difference between group A and group B,group B and group C,and group C and group D(P＞0.05),but there was significant difference between group A and group C,group A and group D,and group B and group D(P＜0.05).(2)The maximum stress of each fracture block in group A was smaller than that in other groups,and the stress distribution of fracture block was more uniform.The stress of the internal fixator was mainly concentrated in the area near the fracture end of the bone plate.The stress distribution of the internal fixator was more uniform in groups A and B,while the stress concentration of the internal fixator in groups C and D was more obvious,and the maximum stress value of the internal fixator in group A decreased by 4.86％-54.61％compared with the other three groups.(3)In the affected side extension and abduction position,both groups A and B had a large stress shielding rate,and the maximum difference between the two groups was 5.67％.In the one-legged standing position on the affected side,the internal fixed stress shielding rate of group A was the highest,while that of group D was the lowest.(4)It is indicated that shaped personalized titanium plate fixation(group A)has better biomechanical stability than the other three groups of traditional reconstructed bone plate fixation.

Lianggesan was first recorded in Taiping Huimin Heji Jufang， which was composed of Rhei Radix et Rhizoma， Natrii Sulfas， Gardeniae Fructus， Forsythiae Fructus， Scutellariae Radix， Glycyrrhizae Radix et Rhizoma（GRR）， Menthae Haplocalycis Herba， Lophatheri Herba and Mel. It was clinically applied to treat fire-heat syndrome in the upper and middle Jiao， and the curative effect was positive. In this study， the bibliometric method was used to conduct a detailed textual research on the formula name， medicinal composition， dosage evolution， origin and processing， functional indications and other aspects of Lianggesan. Research revealed that Lianggesan has six other names， such as Lianqiao Yinzi， Lianqiao Jiedusan， Jufang Lianggesan， Jiegu Lianggesan， Hejian Lianggesan and Qingji Lianggesan. Based on the edition of Taiping Huimin Heji Jufang， an analysis of the evolution of its formula composition revealed that the missing Chinese medicines were predominantly bamboo leaves and honey， while the added Chinese medicines were primarily supplements introduced to address changes in disease manifestations. After textual research， the dosage for one dose of Lianggesan from Taiping Huimin Heji Jufang was as follows：826 g of Rhei Radix et Rhizoma， 826 g of Natrii Sulfas， 826 g of GRR， 413 g of Gardeniae Fructus， 413 g of Menthae Haplocalycis Herba， 413 g of Scutellariae Radix， and 1652 g of Forsythiae Fructus. Decocting method was as following：Grinding the Chinese medicines into coarse powder（2-4 mm）， taking 8.16 g per dose， adding 300 mL of water， along with 2 g of Lophatheri Herba and 5 g of Mel， and decocting to 140 mL. The residue was removed and taken warmly 30 min after meals. It was recommended to take it three times daily until improvement was achieved. The origins of the 9 Chinese medicines were consistent with the 2020 edition of Pharmacopoeia of the People's Republic of China. Except for GRR， which required single frying（stir-frying）， the remaining medicines were all raw products. The description of the function of this formula in ancient books was summarized as purging fire and promoting bowel movements， clearing heat from the upper body and purging the lower body， and the main syndromes included facial redness， tongue swelling， red eyes， etc. In modern applications， the formula is primarily used for respiratory and digestive system diseases， including acute lung injury， chronic obstructive pulmonary disease， herpetic angina and aphthous stomatitis， covering 142 types of diseases. In summary， this paper can provide a basis for further research and development of Lianggesan through the literature review and key information combing.

This article aims to compare and analyze the biomechanical differences between wing-shaped titanium plates and traditional titanium plates in fixing acetabular anterior column and posterior hemi-transverse (ACPHT) fracture under multiple working conditions using the finite element method. Firstly, four sets of internal fixation models for acetabular ACPHT fractures were established, and the hip joint stress under standing, sitting, forward extension, and abduction conditions was calculated through analysis software. Then, the stress of screws and titanium plates, as well as the stress and displacement of the fracture end face, were analyzed. Research has found that when using wing-shaped titanium plates to fix acetabular ACPHT fractures, the peak stress of screws decreases under all working conditions, while the peak stress of wing-shaped titanium plates decreases under standing and sitting conditions and increases under forward and outward extension conditions. The relative displacement and mean stress of the fracture end face decrease under all working conditions, but the values are higher under forward and outward extension conditions. Wing-shaped titanium plates can reduce the probability of screw fatigue failure when fixing acetabular ACPHT fractures and can bear greater loads under forward and outward extension conditions, improving the mechanical stability of the pelvis. Moreover, the stress on the fracture end surface is more conducive to stimulating fracture healing and promoting bone tissue growth. However, premature forward and outward extension rehabilitation exercises should not be performed.
Titanium ; Bone Plates ; Humans ; Acetabulum/surgery* ; Fracture Fixation, Internal/methods* ; Biomechanical Phenomena ; Finite Element Analysis ; Bone Screws ; Fractures, Bone/surgery* ; Stress, Mechanical ; Working Conditions

A middle-aged patient presented with persistent purulent discharge from a scalp incision five years after undergoing craniotomy with artificial dura mater implantation. The wound showed no significant improvement despite a month of systemic antibiotic therapy and local debridement. Subsequent superficial ultrasonography revealed complete separation of the artificial dura mater implant area from the surrounding flap tissue, with a loss of local blood supply. Based on these findings, the artificial dura mater was surgically removed, and a free skin flap transplantation was performed to successfully cover the wound. The wound was well-healed at the 10-month postoperative follow-up.
Humans ; Scalp/diagnostic imaging* ; Middle Aged ; Male ; Epidural Abscess/etiology* ; Ultrasonography ; Surgical Flaps ; Surgical Wound Infection/surgery* ; Dura Mater/surgery*

Liver ischemia-reperfusion injury (LIRI) is a pathological process involving multiple injury factors and cell types, with different stages. Currently, protective drugs targeting a single condition are limited in efficacy, and interventions on immune cells will also be accompanied by a series of side effects. In the current bottleneck research stage, the multi-target and obvious clinical efficacy of Chinese medicine (CM) is expected to become a breakthrough point in the research and development of new drugs. In this review, we summarize the roles of reactive oxygen species (ROS) and reactive nitrogen species (RNS) in various stages of hepatic ischemia-reperfusion and on various types of cells. Combined with the current research progress in reducing ROS/RNS with CM, new therapies and mechanisms for the treatment of hepatic ischemia-reperfusion are discussed.
Reperfusion Injury/drug therapy* ; Reactive Oxygen Species/metabolism* ; Reactive Nitrogen Species/metabolism* ; Humans ; Liver/drug effects* ; Animals ; Medicine, Chinese Traditional ; Drugs, Chinese Herbal/pharmacology*