ObjectiveTo study the changing law of appearance color and physicochemical properties of Angelicae Sinensis Radix Carbonisata（ASRC） during the processing by color space method combined with statistical analysis， so as to provide reference for determining the processing endpoint and evaluating the quality of the decoction pieces. MethodsTaking processing time（4， 8， 12， 16 min） and temperature（180， 200， 220， 240 ℃） as factors， ASRC decoction pieces with different processing degrees were prepared in a completely randomized design. Then， the brightness value（L^*）， red-green value（a^*）， yellow-blue value（b^*）， and total chromaticity value （E^*ab） of the decoction pieces were determined by spectrophotometer， the color difference value（ΔE） was calculated， and the data of colorimetric values were analyzed by discriminant analysis. At the same time， the pH， charcoal adsorption， and contents of tannins， 5-hydroxymethylfurfural（5-HMF）， tryptophan， chlorogenic acid， ferulic acid， senkyunolide I， senkyunolide H and ligustilide of ASRC with different processing degrees were determined by pH meter， ultraviolet and visible spectrophotometry and ultra-high performance liquid chromatography（UPLC）. Principal component analysis（PCA） was used to analyze the data of physicochemical indexes， after determining the processing technology of ASRC， the canonical discriminant function was established to distinguish the decoction pieces with different processing degrees， and leave-one-out cross validation was conducted. Finally， Pearson correlation analysis was used to explore the correlation between various physicochemical indexes and chromaticity values. ResultsWith the prolongation of the processing time， L^*， a^*， b^* and E^*ab all showed a decreasing trend， and the established discriminant model based on color parameters was able to distinguish ASRC with different processing degrees. The pH showed an increasing trend with the prolongation of processing time， and the charcoal adsorption， and the contents of tannins， 5-HMF， and tryptophan all showed an increasing and then decreasing trend. Among them， the charcoal adsorption， contents of tannin and 5-HMF reached their maximum values successively after processing for 8-12 min. While the contents of chlorogenic acid， ferulic acid， senkyunolide I， senkyunolide H and ligustilide decreased with the increase of processing time， with a decrease of 60%-80% at 8 min of processing. Therefore， the optimal processing time should be determined to be 8-12 min. PCA could clearly distinguish ASRC with different processing degrees， while temperature had no significant effect on the processing degree. The 12 batches of process validation results（10 min， 180-240 ℃） showed that except for 3 batches identified as class Ⅱ light charcoal， all other batches were identified as class Ⅲ standard charcoal， and the chromaticity values of each batch of ASRC were within the reference range of class Ⅱ-Ⅲ sample chromaticity values. The correlation analysis showed that the chromaticity values were negatively correlated with pH and charcoal adsorption， and positively correlated with contents of tryptophan， chlorogenic acid， ferulic acid， senkyunolide I， senkyunolide H， and ligustilide. And both pH and charcoal adsorption were negatively correlated with the contents of the above components， but the charcoal adsorption was positively correlated with the content of 5-HMF. ConclusionThe chromaticity values and the contents of various physicochemical indicators of ASRC undergo significant changes with the prolongation of processing time， and there is a general correlation between chromaticity values and various physicochemical indicators. Based on the changes in color and physicochemical indicators， the optimal processing time for ASRC is determined to be 8-12 min. This study reveals the dynamic changes of the relevant indexes in the processing of ASRC， which can provide a reference for the discrimination of the processing degree and the quantitative study of the processing endpoint.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

Objective: To investigate the nutritional status and influencing factors among Tibetan and Mongolian children and adolescents aged 7-18 years in high-altitude regions, so as to provide evidence for early prevention and control of malnutrition in this population. Methods: From May to June 2022, a cluster sampling method was employed to recruit 1 019 Tibetan and Mongolian children and adolescents aged 7-18 years from two primary and secondary schools in Golmud City. Physical examinations, dietary frequency questionnaires, and physical activity assessments were conducted. Nutritional status was classified as obesity, combined overweight/obesity, underweight, or central obesity according to national standards including Screening for Overweight and Obesity among School-age Children and Adolescents, Screening Standard for Malnutrition of School-age Children and Adolescents, Blue Book on Obesity Prevention and Control in China. Chi-square tests, t-test and Logistic regression analyses were performed to identify factors associated with different nutritional statuses. Results: The detection rates of obesity, combined overweight/obesity, underweight, and central obesity were 8.0%, 18.1%, 5.2%, and 19.7%, respectively. The height of children and adolescents across all age groups was generally lower than the national standard values. Tibetan participants exhibited significantly lower height-for-age Z-scores (HAZ)(9-10, 13-17 years, Z =2.01, 2.78, 4.16, 3.38, 4.12, 3.63, 3.00) and BMI-for-age Z-scores (BAZ) compared to Mongolian participants ( Z =-2.95, -2.47, -2.31, -2.89, -2.14, -2.17)( P < 0.05 ). Multivariate Logistic regression revealed that Mongolian children and adolescents had higher risks of obesity ( OR =2.20) and combined overweight/obesity ( OR = 2.18 ) ( P <0.05). Additionally, insufficient moderate-to-vigorous physical activity (MVPA) was associated with an increased risk of central obesity ( OR =1.48, P <0.05), compared with children and adolescents who meet the standard of MVPA. Conclusions The rates of overweight and obesity among Tibetan and Mongolian children and adolescents in Golmud City are higher, influenced by multiple factors. Nutrition interventions and physical activity strategies tailored to ethnic characteristics should be implemented, with emphasis on promoting MVPA to improve nutritional outcomes in this population.

BACKGROUND: P16 inactivation is frequently accompanied by telomerase reverse transcriptase ( TERT ) amplification in human cancer genomes. P16 inactivation by DNA methylation often occurs automatically during immortalization of normal cells by TERT . However, direct evidence remains to be obtained to support the causal effect of epigenetic changes, such as P16 methylation, on cancer development. This study aimed to provide experimental evidence that P16 methylation directly drives cancer development. METHODS: A zinc finger protein-based P16 -specific DNA methyltransferase (P16-Dnmt) vector containing a "Tet-On" switch was used to induce extensive methylation of P16 CpG islands in normal human fibroblast CCD-18Co cells. Battery assays were used to evaluate cell immortalization and transformation throughout their lifespan. Cell subcloning and DNA barcoding were used to track the diversity of cell evolution. RESULTS: Leaking P16-Dnmt expression (without doxycycline-induction) could specifically inactivate P16 expression by DNA methylation. P16 methylation only promoted proliferation and prolonged lifespan but did not induce immortalization of CCD-18Co cells. Notably, cell immortalization, loss of contact inhibition, and anchorage-independent growth were always prevalent in P16-Dnmt&TERT cells, indicating cell transformation. In contrast, almost all TERT cells died in the replicative crisis. Only a few TERT cells recovered from the crisis, in which spontaneous P16 inactivation by DNA methylation occurred. Furthermore, the subclone formation capacity of P16-Dnmt&TERT cells was two-fold that of TERT cells. DNA barcoding analysis showed that the diversity of the P16-Dnmt&TERT cell population was much greater than that of the TERT cell population. CONCLUSION P16 methylation drives TERT -mediated immortalization and transformation of normal human cells that may contribute to cancer development.
Humans ; Telomerase/genetics* ; DNA Methylation/physiology* ; Fibroblasts/cytology* ; Cyclin-Dependent Kinase Inhibitor p16/metabolism* ; Cell Line ; Cell Transformation, Neoplastic/genetics*

BACKGROUND: Chronic kidney disease (CKD) is associated with common pathophysiological processes, such as inflammation and fibrosis, in both the heart and the kidney. However, the underlying molecular mechanisms that drive these processes are not yet fully understood. Therefore, this study focused on the molecular mechanism of heart and kidney injury in CKD. METHODS: We generated an microRNA (miR)-26a knockout (KO) mouse model to investigate the role of miR-26a in angiotensin (Ang)-II-induced cardiac and renal injury. We performed Ang-II modeling in wild type (WT) mice and miR-26a KO mice, with six mice in each group. In addition, Ang-II-treated AC16 cells and HK2 cells were used as in vitro models of cardiac and renal injury in the context of CKD. Histological staining, immunohistochemistry, quantitative real-time polymerase chain reaction (PCR), and Western blotting were applied to study the regulation of miR-26a on Ang-II-induced cardiac and renal injury. Immunofluorescence reporter assays were used to detect downstream genes of miR-26a, and immunoprecipitation was employed to identify the interacting protein of LIM and senescent cell antigen-like domain 1 (LIMS1). We also used an adeno-associated virus (AAV) to supplement LIMS1 and explored the specific regulatory mechanism of miR-26a on Ang-II-induced cardiac and renal injury. Dunnett's multiple comparison and t -test were used to analyze the data. RESULTS: Compared with the control mice, miR-26a expression was significantly downregulated in both the kidney and the heart after Ang-II infusion. Our study identified LIMS1 as a novel target gene of miR-26a in both heart and kidney tissues. Downregulation of miR-26a activated the LIMS1/integrin-linked kinase (ILK) signaling pathway in the heart and kidney, which represents a common molecular mechanism underlying inflammation and fibrosis in heart and kidney tissues during CKD. Furthermore, knockout of miR-26a worsened inflammation and fibrosis in the heart and kidney by inhibiting the LIMS1/ILK signaling pathway; on the contrary, supplementation with exogenous miR-26a reversed all these changes. CONCLUSIONS Our findings suggest that miR-26a could be a promising therapeutic target for the treatment of cardiorenal injury in CKD. This is attributed to its ability to regulate the LIMS1/ILK signaling pathway, which represents a common molecular mechanism in both heart and kidney tissues.
Animals ; MicroRNAs/metabolism* ; Angiotensin II/toxicity* ; Mice ; Renal Insufficiency, Chronic/chemically induced* ; Mice, Knockout ; Disease Models, Animal ; Male ; Signal Transduction/genetics* ; LIM Domain Proteins/genetics* ; Mice, Inbred C57BL ; Cell Line ; Humans

BACKGROUND: Approximately 40% of individuals with diabetes worldwide are at risk of developing diabetic kidney disease (DKD), which is not only the leading cause of kidney failure, but also significantly increases the risk of cardiovascular disease, causing significant societal health and financial burdens. This study aimed to describe the burden of DKD and explore its cross-country epidemiological status, predict development trends, and assess its risk factors and sociodemographic transitions. METHODS: Based on the Global Burden of Diseases (GBD) Study 2021, data on DKD due to type 1 diabetes (DKD-T1DM) and type 2 diabetes (DKD-T2DM) were analyzed by sex, age, year, and location. Numbers and age-standardized rates were used to compare the disease burden between DKD-T1DM and DKD-T2DM among locations. Decomposition analysis was used to assess the potential drivers. Locally weighted scatter plot smoothing and Frontier analysis were used to estimate sociodemographic transitions of DKD disability-adjusted life years (DALYs). RESULTS: The DALYs due to DKD increased markedly from 1990 to 2021, with a 74.0% (from 2,227,518 to 3,875,628) and 173.6% (from 4,122,919 to 11,278,935) increase for DKD-T1DM and DKD-T2DM, respectively. In 2030, the estimated DALYs for DKD-T1DM surpassed 4.4 million, with that of DKD-T2DM exceeding 14.6 million. Notably, middle-sociodemographic index (SDI) quintile was responsible for the most significant DALYs. Decomposition analysis revealed that population growth and aging were major drivers for the increased DKD DALYs in most regions. Interestingly, the most pronounced effect of positive DALYs change from 1990 to 2021 was presented in high-SDI quintile, while in low-SDI quintile, DALYs for DKD-T1DM and DKD-T2DM presented a decreasing trend over the past years. Frontiers analysis revealed that there was a negative association between SDI quintiles and age-standardized DALY rates (ASDRs) in DKD-T1DM and DKD-T2DM. Countries with middle-SDI shouldered disproportionately high DKD burden. Kidney dysfunction (nearly 100.0% for DKD-T1DM and DKD-T2DM), high fasting plasma glucose (70.8% for DKD-T1DM and 87.4% for DKD-T2DM), and non-optimal temperatures (low and high, 5.0% for DKD-T1DM and 5.1% for DKD-T2DM) were common risk factors for age-standardized DALYs in T1DM-DKD and T2DM-DKD. There were other specific risk factors for DKD-T2DM such as high body mass index (38.2%), high systolic blood pressure (10.2%), dietary risks (17.8%), low physical activity (6.2%), lead exposure (1.2%), and other environmental risks. CONCLUSIONS DKD markedly increased and varied significantly across regions, contributing to a substantial disease burden, especially in middle-SDI countries. The rise in DKD is primarily driven by population growth, aging, and key risk factors such as high fasting plasma glucose and kidney dysfunction, with projections suggesting continued escalation of the burden by 2030.
Humans ; Global Burden of Disease ; Risk Factors ; Male ; Female ; Disability-Adjusted Life Years ; Diabetic Nephropathies/epidemiology* ; Middle Aged ; Diabetes Mellitus, Type 2/epidemiology* ; Adult ; Diabetes Mellitus, Type 1/complications* ; Aged ; Adolescent ; Young Adult ; Quality-Adjusted Life Years

Hongsheng Dan, historically referred to as the "surgical sacred medicine", is at risk of losing its refining technology in contemporary times. This study aimed to preserve and innovate this traditional non-heritage refining technology. By utilizing the analytic hierarchy process(AHP) combined with the entropy weight method, this study established the hierarchical structure model of refining process of Hongsheng Dan and conducted a single factor experiment and an L_9(3~4) orthogonal experiment to optimize the refining method of Hongsheng Dan. Additionally, the study employed infrared thermal imaging to monitor temperature variations of Hongsheng Dan during the refining process. The optimized refining parameters for Hongsheng Dan were established as follows: a slow fire temperature of 175 ℃ with a duration of 30 minutes, a strong fire temperature of 270 ℃ with a duration of 60 minutes, and a tail fire temperature of 180 ℃ with a duration of 15 minutes. The stability and feasibility of this optimized process were confirmed through validation tests. The research focused on the material transformation of Hongsheng Dan, starting from the material changes during the refining process of Hongsheng Dan and the synthesis of mercuric oxide from nitric acid. The study investigated elemental transformations, physical phase changes, and alterations in thermal properties. 78.98% of the mercury in Hongsheng Dan and 80.21% of the mercury in mercuric oxide from nitric acid were retained. The diffraction peak intensity of the(011) crystal plane of Hongsheng Dan was highest at approximately 30.07°, indicating that the(011) crystal plane had a preferred crystalline orientation. Furthermore, the temperature range for the alteration in thermal properties during the refining process of Hongsheng Dan was found to be between 80 ℃ and 130 ℃. This research not only optimized the refining technology of Hongsheng Dan but also pioneered the application of infrared thermal imaging to study temperature changes throughout the refining process. By exploring the material transformation patterns of Hongsheng Dan and the synthesis of mercuric oxide from nitric acid, the study provided technical support for the preservation and innovation of Hongsheng Dan.
Drugs, Chinese Herbal/standards* ; Temperature

OBJECTIVE: To investigate the relationship between peripheral blood T-cell immunoglobulin mucin-3 (TIM-3) and iron overload in patients with myelodysplastic syndrome (MDS) undergoing red blood cell transfusion. METHODS: 120 MDS patients who received treatment at Wuhan Third Hospital from June 2020 to May 2022 were included and analyzed as research subjects, all of whom met the indications for red blood cell transfusion. Blood routine and biochemical indicators were tested before transfusion, and general clinical data of the patients were statistically analyzed. The iron metabolism status of the patients were evaluated. The clinical characteristics of patients with iron overload and the factors affecting iron overload were analyzed. And a correlation analysis was conducted between TIM-3 and other factors affecting iron overload. RESULTS: Among the 120 MDS patients included in this study, 82 cases (68.33%) were detected to have iron overload after red blood cell transfusion. The occurrence time of iron overload was 20-42 weeks, with an average time of 32.35±5.26 weeks, calculated from the first transfusion of red blood cells. The proportion of patients with high-risk and extremely high-risk according to the revised International Prognostic Scoring System (IPSS-R) and WHO classification-based Prognostic Scoring System (WPSS), the volume of blood transfusions, the proportion of transfusion-dependent patients, and the levels of serum hepcidin (Hepc), erythropoietin (EPO), and TIM-3 in patients with iron overload were higher than those in patients with normal iron metabolism, and the differences were statistically significant (P < 0.05). Logistic regression analysis showed that high-risk and extremely high-risk according to WPSS, blood transfusion volume, transfusion dependence, and upregulation of serum Hepc, EPO, and TIM-3 expression were factors affecting iron overload in MDS patients undergoing red blood cell transfusion (P < 0.05). Pearson correlation analysis showed that serum TIM-3 level in MDS patients were positively correlated with the other factors affecting iron overload (P < 0.05). CONCLUSION Serum TIM-3 is associated with iron overload in MDS patients undergoing red blood cell transfusion, and upregulation of serum TIM-3 expression increases the risk of iron overload after red blood cell transfusion.
Humans ; Myelodysplastic Syndromes/blood* ; Iron Overload/blood* ; Hepatitis A Virus Cellular Receptor 2/blood* ; Erythrocyte Transfusion ; Male ; Female ; Middle Aged ; Aged ; Iron

Metformin has been demonstrated to attenuate hyperglycaemia by modulating the gut microbiota. However, the mechanisms through which the microbiome mediates metformin monotherapy failure (MMF) are unclear. Herein, in a prospective clinical cohort study of newly diagnosed type 2 diabetes mellitus (T2DM) patients treated with metformin monotherapy, metagenomic sequencing of faecal samples revealed that Phocaeicola vulgatus abundance was approximately 12 times higher in nonresponders than in responders. P. vulgatus rapidly hydrolysed taurine-conjugated bile acids, leading to ceramide accumulation and reversing the improvements in glucose intolerance conferred by metformin in high-fat diet-fed mice. Interestingly, C22:0 ceramide bound to mitochondrial fission factor to induce mitochondrial fragmentation and impair hepatic oxidative phosphorylation in P. vulgatus-colonized hyperglycaemic mice, which could be exacerbated by metformin. This work suggests that metformin may be unsuitable for P. vulgatus-rich T2DM patients and that clinicians should be aware of metformin toxicity to mitochondria. Suppressing P. vulgatus growth with cefaclor or improving mitochondrial function using adenosylcobalamin may represent simple, safe, effective therapeutic strategies for addressing MMF.