The prescription of Qidong Yixin oral liquid is derived from the experience of national medical master Ren Jixue in treating viral myocarditis （VMC）. It has the functions of tonifying Qi， nourishing the heart，calming the mind， and relieving palpitations. It is used to treat VMC and angina pectoris of coronary heart disease caused by deficiency of both Qi and Yin. However，the understanding of its efficacy evidence， advantageous aspects， dosage and administration， and medication safety remains insufficient in clinical practice. Therefore，the development of the Expert Consensus on the Clinical Application of Qidong Yixin Oral Liquid （hereinafter referred to as consensus） was initiated. Consensus strictly followed the process and methods of the expert consensus on the clinical application of Chinese patent medicines of the China Association of Chinese Medicine，successively completing multiple tasks such as the consensus project initiation，determination of clinical problems，evidence search and evaluation，formation of recommendation opinions and consensus suggestions，solicitation of opinions，peer review， submission for review and release， and so on. Consensus formed a total of 10 recommendation opinions and 12 consensus suggestions，clarifying the clinical positioning，efficacy advantages，syndrome differentiation，dosage and administration，combination therapy，timing of medication，adverse reactions，contraindications， and precautions of Qidong Yixin oral liquid，indicating that it has good clinical advantages and safety in the treatment of VMC and angina pectoris of coronary heart disease，providing norms and references for physicians to safely and rationally apply Qidong Yixin oral liquid. Consensus was reviewed and approved for release by the Standardization Office of the China Association of Chinese Medicine on December 23， 2024. Standard number：GSCACM-376-2024.

Objective To analyze the clinical characteristics and risk factors of noninfectious fever after endovascular repair of aortic dilatation diseases, and to explore management strategies. Methods A retrospective analysis was conducted on the clinical data of patients who underwent endovascular aortic repair for aortic dilatation diseases from January 2021 to October 2023. Based on inclusion and exclusion criteria, the enrolled patients were divided into a febrile group and an afebrile group according to the presence of postoperative fever. Clinical data, including demographics and surgical details, were compared between the two groups. Multivariate logistic regression analysis was performed on indicators with P≤0.05 in the univariate analysis, and receiver operating characteristic (ROC) curves were generated to analyze the predictive value of risk factors for postoperative noninfectious fever. Results A total of 305 patients were included in the final analysis. Postoperative noninfectious fever occurred in 75.08% (229/305) of the patients, with 98.25% of cases occurring within the first two postoperative days. The febrile group (n=229) had a median age of 65.0 (IQR: 53.0, 73.0) years with 83.4% males, while the afebrile group (n=76) had a median age of 71.0 (IQR: 65.0, 76.7) years with 84.2% males. Univariate analysis showed that the age, prevalence of coronary heart disease, preoperative statin use, and prevalence of aortic aneurysm were significantly lower in the febrile group compared to the afebrile group. Logistic regression analysis indicated that age, surgical site, disease type, preoperative elevated body temperature, and stent type were significantly associated with noninfectious fever, while preoperative statin use was negatively correlated. ROC curve analysis demonstrated that age, surgical site, preoperative elevated body temperature, and stent type had significant predictive value for postoperative noninfectious fever (P<0.01). Conclusion Noninfectious fever is highly prevalent following aortic repair. The relationship between fever and infection should be comprehensively evaluated based on risk factors and changes in the patient's condition to promote the rational use of antibiotics.

ObjectiveTo explore the possible mechanisms of electroacupuncture at Fengchi （GB 20）， Waiguan （TE 5）， and Yanglingquan （GB 34） in treating chronic migraine from the perspective of nociceptive sensitization. MethodsForty SPF-grade SD rats were randomly divided into blank group， model group， electroacupuncture group， electroacupuncture + agonist group， and inhibitor group， with 8 rats in each group. Except for the blank group， rats were injected intraperitoneally with nitroglycerin to establish a chronic migraine rat model. After successful modeling， the electroacupuncture group received electroacupuncture at bilateral "Fengchi" （GB 20）， "Waiguan" （TE 5）， and "Yanglingquan" （GB 34） for 30 minutes each session. The electroacupuncture + agonist group received the same electroacupuncture treatment and additional injection of protein kinase C （PKC） agonist Phorbol 12-myristate 13-acetate （1.0 ng/μl， 25 μl） via the infraorbital foramen. The inhibitor group received PKC inhibitor Chelerythrine Chloride （1.0 ng/μl， 10 μl） via the infraorbital foramen. The blank group， model group， and inhibitor group underwent restraint for 30 minutes without other interventions. All groups were continuously intervened for 5 days. After the intervention， the nociceptive thresholds （mechanical and thermal pain） of the periorbital area and hind paw were measured. The expression levels of transient receptor potential vanillic acid subtype 1 （TRPV1）， phosphorylated TRPV1 （p-TRPV1）， PKC proteins， Trpv1， Pkc mRNA， and the average fluorescence intensity of transient receptor potential vanillic acid subtype 1 （TRPV1） and PKC in the trigeminal ganglion were detected using Western Blot， real-time fluorescence quantitative PCR， and immunofluorescence methods. ResultsCompared with the blank group， the mechanical and thermal pain thresholds of the periorbital area and hind paw were reduced in the model group， and the protein levels of TRPV1， PKC， p-TRPV1， as well as the mRNA expression of Trpv1 and Pkc， and the average fluorescence intensity of TRPV1 and PKC in the trigeminal ganglion significantly increased （P＜0.05 or P＜0.01）. Compared with the model group， the electroacupuncture group exhibited increased mechanical and thermal pain thresholds in the periorbital and hind paw areas， and decreased protein levels of TRPV1， PKC， p-TRPV1， mRNA expression of Trpv1 and Pkc， and average fluorescence intensity of TRPV1. In the electroacupuncture + agonist group， the average fluorescence intensity of TRPV1 in the trigeminal ganglion decreased. The inhibitor group exhibited increased mechanical pain thresholds in the periorbital area and thermal pain thresholds in the hind paw， along with decreased protein levels of TRPV1， PKC， p-TRPV1， and the average fluorescence intensity of TRPV1 and PKC （P＜0.05 or P＜0.01）. Compared with the electroacupuncture group， the electroacupuncture + agonist group showed an increase in the protein levels of TRPV1， PKC， p-TRPV1， and the mRNA expression of Trpv1 （P＜0.05 or P＜0.01）. ConclusionElectroacupuncture at the "Fengchi" （GB 20）， "Waiguan" （TE 5）， and "Yanglingquan" （GB 34） acupoints can increase the mechanical and thermal pain thresholds in chronic migraine rats and alleviate nociceptive sensitization. The mechanism may be related to the inhibition of PKC/TRPV1 pathway.

AIM:To observe the defocus state and myopia control in myopic children wearing single-vision, defocus, and orthokeratology lenses using multispectral refraction topography(MRT).METHODS: A total of 279 myopic patients aged 8-14 years old, with a spherical equivalent(SE)from -7.00 to -0.50 D, treated at the Chengdu Aier Eye Hospital from June 2022 to December 2023. Patients who volunteered for the study were assigned to three groups. A total of 94 cases were provided with single-vision spectacle lenses(SVL group), 90 cases received individualized ocular refraction customization(IORC group), and 95 cases received orthokeratology lenses(OK group). Simultaneously, the three groups were further categorized into low(-3.00 to -0.50 D), moderate(-6.00 to -3.25 D), and high myopia(-7.00 to -6.25 D)groups according to different SE. MRT was used to measure and compare the defocus changes of the retina in supperior, inferior, nasal, and temporal quadrants(RDV-S, RDV-I, RDV-N, RDV-T), and three angles of field of view, including 0-15°, 15°-30°, and 30°-45°(RDV-15, RDV-30, RDV-45)in the three groups(the data divide for the connected regions is grouped to the latter group). A one-way analysis of variance was used for intergroup comparisons. Univariate and multivariate linear regression analyses were used to analyze the factors related to changes in the axial length(AL)at 1 a after intervention.RESULTS:There were significant differences in 1-year SE and AL growth among patients in the SVL, IORC, and OK groups before and after intervention(P<0.001). The 1-year SE and the difference of AL growth in patients with low myopia was significantly different among SVL, IORC, and OK groups(P<0.001); however, there was no significant difference between the IORC and OK groups(P>0.05); there were significant differences in the SE and AL growth changes between the OK group and the IORC and SVL groups in moderate myopia(P<0.001); and there were significant differences between the OK group and the IORC and SVL groups in SE and AL growth of high myopia group after wearing lenses for 1 a(P<0.001), while there were no significant differences between the IORC and SVL groups(P>0.05). In addition, there were significant differences in the relative peripheral refractive errors(RPRE)of 4 quadrants and 3 eccentric regions among the three groups of patients in different degrees of myopia groups(P<0.001). Pair-wise comparison of the growth difference of eccentric D-RDV-15 in low myopia group after wearing lenses for 1 a showed significant differences between the SVL, IORC, and OK groups(P<0.001), but no significant differences between the IORC and OK groups(P>0.05). The angle of field of view D-RDV-30 in moderate myopia subgroups was statistically different between the SVL group and the IORC and OK groups after wearing lenses for 1 a(P<0.001), while the IORC and OK groups showed no significant differences(P>0.05); the angle of field of view D-RDV-15 in high myopia subgroups was statistically different between the OK group and the IORC and SVL groups after wearing lenses for 1 a(P<0.001), but there was no significant difference between the IORC and SVL groups(P>0.05). Univariate and multivariate linear regression model analysis showed that the changes in D-TRVD, D-RDV-45, D-RDV-N, and D-RDV-I correlated with the increase in the difference in 1 a AL.CONCLUSION: MRT can be used to guide the clinical control of myopia. Myopia development is related to the peripheral retinal defocus state, and the difference of defocus quantity in the inferior nasal side at 30°-45° eccentricity may be a factor regulating the rapid progression of myopia.

Following the release of the Technical Requirements on Quality Control and Standard Establishment of Traditional Chinese Medicine Formula Granules by the National Medical Products Administration in 2021, Chinese Pharmacopoeia Commission has promulgated 296 national drug standards so far, and most provinces have started the work of establishing provincial standards as supplements. The promulgation of standards fostered high-quality development of the industry. Since the implementation of national and provincial standards for more than three years, enterprises have gained deep understanding and hands-on experiences on the characteristics, technical requirements, production process, and quality control of traditional Chinese medicine(TCM) formula granules. Meanwhile, challenges have emerged restricting the high-quality development of this industry, including how to formulate quality control strategies for medicinal materials and decoction pieces, how to reduce manufacturing costs, and how to improve the pass rate and product stability under high standards. Based on the work experiences from standard management and process research, this article analyzed the distribution of sources, processing methods, dry extract rate ranges, process requirements for volatile oil-containing decoction pieces, control measures of safety indices, characteristics and trends of setting characteristic chromatograms or fingerprints, characteristics and trends of setting content ranges, and main differences between national standards and provincial standards. On the one hand, this article aims to present main characteristics for deeply understanding different indicators in standards and provide basic ideas for establishing quality and process control systems. On the other hand, from the perspective of industrial practice, suggestions are put forward on the important aspects that need to be focused on in the quality and process control of TCM formula granules.
Drugs, Chinese Herbal/chemistry* ; Quality Control ; Medicine, Chinese Traditional/standards* ; China ; Drug Industry/standards*

Traditional Chinese medicine(TCM) is the pillar for the development of motherland medicine, and animal medicine has a long history of application in China, characterized by wide resources, strong activity, definite efficacy, and great benefits. It has significant potential and important status in the consumption market of raw materials of TCM. In the context of global climate change, farming system alterations, and low renewability, the depletion of wild medicinal animal resources has accelerated. Accordingly, the conservation and sustainable utilization of wild resources of animal medicinal materials has become a problem that garners increasing attention and urgently needs to be solved. This paper summarizes the current situation of domestic and foreign medicinal animal breeding and research progress in industrial application in recent years and points out the issues related to standardized breeding, germplasm selection and breeding, and quality evaluation standards for medicinal animals. Furthermore, this paper discusses standardized breeding, quality standards, resource protection and utilization, and the search for alternative resources for rare and endangered medicinal animals. It proposes that researchers should systematically carry out in-depth basic research on animal medicine, improve the breeding scale and level of medicinal animals, employ modern technology to enhance the quality standards of medicinal materials, and strengthen the research and development of alternative resources. This approach aims to effectively address the relationship between protection and utilization and make a significant contribution to the sustainable development of medicinal animal resources and the animal-based Chinese medicinal material industry.
Animals ; Breeding ; China ; Medicine, Chinese Traditional ; Conservation of Natural Resources

Drug administration via hollow microneedles (HMN) have the advantages of painlessness, avoidance of first-pass effect, capability of sustained infusion, and no need for professional personnel operation. In addition, HMN can also be applied in the fields of body fluid extraction and biosensors, showing broad application prospects. However, traditional manufacturing technologies cannot meet the demand for low-cost mass production of HMN, limiting its widespread application. This paper reviews the main manufacturing technologies used for HMN in recent years, which include photolithography and etching, laser etching, sputtering and electroplating, micro-molding, three-dimensional (3D) printing and drawing lithography. It further analyzes the characteristics and limitations of existing manufacturing technologies and points out that the combination of various manufacturing technologies can improve production efficiency to a certain extent. In addition, this paper looks forward to the future trends of HMN manufacturing technology and proposes possible directions for its development. In conclusion, it is expected that this review can provide new ideas and references for follow-up research.
Printing, Three-Dimensional ; Needles ; Humans ; Drug Delivery Systems/methods* ; Equipment Design ; Microinjections/methods*

Temporomandibular joint (TMJ) disc displacement is one of the most significant subtypes of temporomandibular joint disorders, but its etiology and mechanism are poorly understood. In this study, we elucidated the mechanisms by which destruction of inflamed collagen fibrils induces alterations in the mechanical properties and positioning of the TMJ disc. By constructing a rat model of TMJ arthritis, we observed anteriorly dislocated TMJ discs with aggravated deformity in vivo from five weeks to six months after a local injection of Freund's complete adjuvant. By mimicking inflammatory conditions with interleukin-1 beta in vitro, we observed enhanced expression of collagen-synthesis markers in primary TMJ disc cells cultured in a conventional two-dimensional environment. In contrast, three-dimensional (3D)-cultivated disc cell sheets demonstrated the disordered assembly of inflamed collagen fibrils, inappropriate arrangement, and decreased Young's modulus. Mechanistically, inflammation-related activation of the nuclear factor kappa-B (NF-κB) pathway occurs during the progression of TMJ arthritis. NF-κB inhibition reduced the collagen fibril destruction in the inflamed disc cell sheets in vitro, and early NF-κB blockade alleviated collagen degeneration and dislocation of the TMJ discs in vivo. Therefore, the NF-κB pathway participates in the collagen remodeling in inflamed TMJ discs, offering a potential therapeutic target for disc displacement.
Animals ; NF-kappa B/metabolism* ; Temporomandibular Joint Disorders/pathology* ; Temporomandibular Joint Disc/metabolism* ; Rats ; Rats, Sprague-Dawley ; Disease Models, Animal ; Male ; Collagen/metabolism* ; Cells, Cultured ; Joint Dislocations/pathology* ; Interleukin-1beta ; Arthritis, Experimental

Digital technologies have become an integral part of complete denture restoration. With advancement in computer-aided design and computer-aided manufacturing (CAD/CAM), tools such as intraoral scanning, facial scanning, 3D printing, and numerical control machining are reshaping the workflow of complete denture restoration. Unlike conventional methods that rely heavily on clinical experience and manual techniques, digital technologies offer greater precision, predictability, and efficacy. They also streamline the process by reducing the number of patient visits and improving overall comfort. Despite these improvements, the clinical application of digital complete denture restoration still faces challenges that require further standardization. The major issues include appropriate case selection, establishing consistent digital workflows, and evaluating long-term outcomes. To address these challenges and provide clinical guidance for practitioners, this expert consensus outlines the principles, advantages, and limitations of digital complete denture technology. The aim of this review was to offer practical recommendations on indications, clinical procedures and precautions, evaluation metrics, and outcome assessment to support digital restoration of complete denture in clinical practice.
Humans ; Denture, Complete ; Computer-Aided Design ; Denture Design/methods* ; Consensus ; Printing, Three-Dimensional

Dysregulated RNA splicing is a well-recognized characteristic of colorectal cancer (CRC); however, its intricacies remain obscure, partly due to challenges in profiling full-length transcript variants at the single-cell level. Here, we employ high-depth long-read scRNA-seq to define the full-length transcriptome of colorectal epithelial cells in 12 CRC patients, revealing extensive isoform diversities and splicing alterations. Cancer cells exhibited increased transcript complexity, with widespread 3'-UTR shortening and reduced intron retention. Distinct splicing regulation patterns were observed between intrinsic-consensus molecular subtypes (iCMS), with iCMS3 displaying even higher splicing factor activities and more pronounced 3'-UTR shortening. Furthermore, we revealed substantial shifts in isoform usage that result in alterations of protein sequences from the same gene with distinct carcinogenic effects during tumorigenesis of CRC. Allele-specific expression analysis revealed dominant mutant allele expression in key oncogenes and tumor suppressors. Moreover, mutated PPIG was linked to widespread splicing dysregulation, and functional validation experiments confirmed its critical role in modulating RNA splicing and tumor-associated processes. Our findings highlight the transcriptomic plasticity in CRC and suggest novel candidate targets for splicing-based therapeutic strategies.
Humans ; Colorectal Neoplasms/metabolism* ; RNA Isoforms/metabolism* ; Single-Cell Analysis ; RNA Splicing ; Gene Expression Regulation, Neoplastic ; RNA, Neoplasm/metabolism* ; Transcriptome