OBJECTIVES

To determine and group the anthropometric norms of the zygomaticomaxillary (ZM) fixation points as a basis for optimizing the design of maxillary L-plates, from a sample population aged 19 to 59, in a tertiary government hospital in Central Luzon, Philippines.

Design: Retrospective Review of CT scans

Setting: Tertiary Government Training Hospital

Participants: CT scan images of 110 surgical patients from the Department of ORL-HNS, obtained between January 2023 and December 2024 were measured

A total of 169 maxillae were analyzed, comprising 85 right and 84 left sides. The maxillary width (MW) of males (30.59 ± 2.86 mm) was found to be wider than the MW of females (29.68 ± 2.69 mm) by 0.91 mm. The zygomatic width (ZW) and its inclination angle (IA), on the other hand, were not significantly different. There were also no significant differences in the MW, ZW, and IA between the right and left sides; with the MW mean at 30.17 ± 2.81 mm and a range of 24.40 36.80 mm, the ZW mean at 20.22 ± 2.47 mm and a range of 15.40–28.30 mm, and the IA mean at 111.13 ± 11.29 degrees and a range of 78.50–131.70 degrees. To capture the range of maxillary sizes among patients, a quartile-based grouping was introduced. The MW, ZW, and IA of the L-plates were classified into small (27.80 mm, 18.30 mm, 104.15 degrees), medium (29.80 mm, 19.90 mm, 110.70 degrees), and large (32.35 mm, 22.05 mm, 120.20 degrees) sizes, respectively.

This study established reference values for the MW, ZW and IA to optimize the maxillary L-plate design for ZM fractures. The novel quartile-based grouping provided options for future L-plate measurements – potentially creating a better fit for patients, streamlining design in implant production, and improving the efficiency and outcomes of maxillofacial surgeons.

OBJECTIVES: To assess the biomechanical performance of a novel bridging plate for treating Rockwood III acromioclavicular joint dislocation. METHODS: A novel bridging plate structure was designed based on CT data from a patient with Rockwood type III acromioclavicular joint dislocation, and a finite element model of the bridging plate-acromioclavicular joint interaction was constructed. The stress and deformation characteristics and biomechanical compatibility of the plate under post-reduction, normal loading, and impact loading conditions were analyzed to evaluate its fixation mechanism and clinical advantages. RESULTS: The stiffness of the bridging system was 27.78 N/mm, close to that of acromioclavicular joint ligaments (26.05 N/mm) and meeting the requirements for flexible deformation. Under normal loading, the maximum stress in the bridging system was 88.29 MPa to sustain physiological activities; under impact loading, the maximum stress reached 480 MPa, and the cable underwent plastic deformation to dissipate energy and effectively buffer local stress concentrations, thereby reducing the risk of rigid bone fractures. The high-stress regions in the bone primarily occurred at the edges of the C1-C4 screw holes. The maximum bone stress was 0.762 MPa under normal loading and 5.963 MPa under impact loading, accounting for 2.86% and 1.66% of the corresponding bolt stresses, respectively. CONCLUSIONS The novel bridging plate is better adapted to biomechanical characteristics of the acromioclavicular joint compared to traditional internal fixation. This fixation system provides sufficient stability while allowing physiological micromotion to facilitate postoperative rehabilitation. Significant flexible deformation can occur at the connection between the fixation ring and the cable, and brittle materials should not be used in this region. The issue of stress concentration at the C1-C4 screw holes requires special attention in its clinical application.
Acromioclavicular Joint/surgery* ; Humans ; Bone Plates ; Biomechanical Phenomena ; Finite Element Analysis ; Joint Dislocations/surgery* ; Fracture Fixation, Internal/methods*

OBJECTIVES: This study aims to analyze the biomechanics of three kinds of rigid internal fixation methods for condylar head fractures. METHODS: A three dimensional finite element model of the normal mandible was constructed. It was then used to prepare condylar head fracture finite element model and three kinds of rigid internal fixation finite element model (unilateral tension screw, bilateral tension screw, tension screw+titanium plate). The mechanical characteristics and changes of the mandible condyle under the same mechanical conditions were compared among the three different rigid internal fixation methods. RESULTS: The maximum equivalent stress and displacement of the non-free end of condyle under the rigid internal fixation method of unilateral tension screw were 71.03 MPa and 4.72 mm, respectively. The maximum equivalent stress and displacement of the free end of condyle were 78.45 MPa and 4.50 mm, respectively. The maximum stress of fracture suture was 3.27 MPa. The maximum equivalent stress and displacement of the non-free end of condyle under the rigid internal fixation method of bilateral tension screw were 70.52 MPa and 4.00 mm, respectively. The maximum equivalent stress and displacement of the free end of condyle were 72.49 MPa and 3.85 mm, respectively. The maximum stress of fracture suture was 2.33 MPa. The maximum equivalent stress and maximum displacement of the non-free end of condyle under the rigid internal fixation method of tension screw+titanium plate were 67.26 MPa and 2.66 mm, respectively. The maximum equivalent stress and maximum displacement of the free end of condyle were 69.66 MPa and 2.50 mm, respectively. The maximum stress of fracture suture was 2.18 MPa. CONCLUSIONS The tension screw+titanium plate rigid internal fixation method is the most conducive to biomechanical distribution for condylar head fractures.
Fracture Fixation, Internal/instrumentation* ; Mandibular Condyle/surgery* ; Biomechanical Phenomena ; Bone Screws ; Finite Element Analysis ; Humans ; Mandibular Fractures/surgery* ; Bone Plates ; Titanium ; Stress, Mechanical

OBJECTIVES: This study investigates independent risk factors for postoperative internal fixation device infection in patients with maxillofacial fractures and proposes an early warning model based on the synthetic minority over-sampling technique (SMOTE) algorithm. METHODS: A total of 1 104 patients who underwent surgical treatment for maxillofacial fractures at Oral and Maxillofacial Surgery Department, Affiliated Hospital of Nantong University from January 2021 to December 2024 were retrospectively analyzed. The patients were divided into two groups based on the presence of postoperative internal fixation device infection: the infection group (27 cases) and non-infection group (1 077 cases). Clinical data from both groups were collected and subjected to statistical analysis. Univariate and binary Logistic regression analysis were used to identify risk factors for postoperative internal fixation device infection in maxillofacial fractures. Subsequently, a Logistic regression model was established, and the dataset was improved based on the SMOTE algorithm to construct an early warning model with the improved dataset. The prediction performance of the models was compared and validated. RESULTS: Among the 1 104 patients who underwent surgical treatment for maxillofacial fractures, 27 cases of postoperative internal fixation device infections were identified, corresponding to an infection rate of 2.45% (27/1 104). Age, diabetes history, fracture severity, and oral hygiene status were all identified as risk factors for postoperative internal fixation device infections in maxillofacial fractures (all P<0.05). The prediction model based on the original data (P1). The prediction model based on the SMOTE algorithm (P2). Receiver operating characteristic (ROC) curve analysis shows that the area under curve (AUC) for the P2 model was 0.882, the P1 model was 0.861, indicating the superior predictive performance of the P2 model. The DeLong test results show that the difference in AUC between the two models was statistically significant (P<0.05). CONCLUSIONS Age, diabetes history, postoperative fracture severity, and oral hygiene status are all risk factors for infections associated with internal fixation devices after maxillofacial fracture surgery. The proposed early warning model demonstrated good predictive performance. Medical professionals can utilize this model to effectively intervene and anticipate infections related to internal fixation devices after maxillofacial fracture surgery.
Humans ; Algorithms ; Retrospective Studies ; Male ; Female ; Fracture Fixation, Internal/instrumentation* ; Risk Factors ; Middle Aged ; Adult ; Logistic Models ; Surgical Wound Infection/epidemiology* ; Aged ; Internal Fixators/adverse effects* ; Maxillofacial Injuries/surgery* ; Adolescent

INTRODUCTION: The aim of this study was to elucidate the epidemiology and distribution of hand fractures in Singapore. METHODS: A total of 701 hand fractures in 596 patients aged 21 years and above from a single centre were reviewed from 2010 to 2011. Details regarding the patient demographics, occupation, mechanism of injury, associated injuries and treatment were obtained. RESULTS: Hand fractures were particularly significant in patients between the ages of 21 and 40 years 58.9% of the total cases. The relative risk of hand fractures in males was 5.5 times greater than that in females. The majority of hand fractures occurred at the workplace (47.7%), with crush injury being the main mechanism of injury (33.6%). The most common locations of hand fracture were the little finger ray (31.2%) and distal phalanges (37.7%). There were 170 cases that underwent surgical fixation, which accounted for 24.3% of all fractures. Fixation rate was similar for both closed and open fractures but was significantly higher in the proximal and middle phalanges compared to the distal phalanx and metacarpal ( P < 0.001). With regards to surgical fixation methods, wires were commonly used in either tuft fractures (100.0%) or intra-articular fractures (69.9%), whereas plates and screws were commonly used in shaft fractures (65.5%). CONCLUSION The most significant population that sustained hand fractures in Singapore are young to middle-aged males who are skilled manual workers. The most commonly involved ray and location of hand fractures are the little finger ray and the distal phalanges, respectively, as they are in a relatively more exposed location.
Humans ; Singapore/epidemiology* ; Male ; Female ; Adult ; Middle Aged ; Fractures, Bone/surgery* ; Hand Injuries/surgery* ; Young Adult ; Aged ; Hand Bones/injuries* ; Retrospective Studies ; Fracture Fixation, Internal

This article aims to compare and analyze the biomechanical differences between wing-shaped titanium plates and traditional titanium plates in fixing acetabular anterior column and posterior hemi-transverse (ACPHT) fracture under multiple working conditions using the finite element method. Firstly, four sets of internal fixation models for acetabular ACPHT fractures were established, and the hip joint stress under standing, sitting, forward extension, and abduction conditions was calculated through analysis software. Then, the stress of screws and titanium plates, as well as the stress and displacement of the fracture end face, were analyzed. Research has found that when using wing-shaped titanium plates to fix acetabular ACPHT fractures, the peak stress of screws decreases under all working conditions, while the peak stress of wing-shaped titanium plates decreases under standing and sitting conditions and increases under forward and outward extension conditions. The relative displacement and mean stress of the fracture end face decrease under all working conditions, but the values are higher under forward and outward extension conditions. Wing-shaped titanium plates can reduce the probability of screw fatigue failure when fixing acetabular ACPHT fractures and can bear greater loads under forward and outward extension conditions, improving the mechanical stability of the pelvis. Moreover, the stress on the fracture end surface is more conducive to stimulating fracture healing and promoting bone tissue growth. However, premature forward and outward extension rehabilitation exercises should not be performed.
Titanium ; Bone Plates ; Humans ; Acetabulum/surgery* ; Fracture Fixation, Internal/methods* ; Biomechanical Phenomena ; Finite Element Analysis ; Bone Screws ; Fractures, Bone/surgery* ; Stress, Mechanical ; Working Conditions

OBJECTIVE: To explore the feasibility and effectiveness of suture anchor double-pulley technique combined with suture three-dimensional binding via bone tunnel technique for avulsion fractures of the inferior pole of the patella. METHODS: A clinical data of 38 patients with avulsion fractures of the inferior pole of the patella, who met the selective criteria and were admitted between September 2021 and April 2023, was retrospectively analyzed. The fractures were treated with suture anchor double-pulley technique combined with suture three-dimensional binding via bone tunnel technique in 18 cases (group A) and steel wire tension-band fixation in 20 cases (group B). There was no significant difference in terms of age, gender, cause of fracture, side of fracture, and disease duration between the two groups ( P>0.05). The length of incision, operation time, occurrence of complications, the range of motion of knee joint, and Böstman score of knee joint at last follow-up were recorded. The fracture healing was evaluated through X-ray films and the time of fracture healing was recorded. RESULTS: All incisions healed by first intention. The length of incision was significantly shorter in group A than in group B ( P<0.05). There was no significant difference in the operation time between the two groups ( P>0.05). All patients were followed up 12-24 months (mean, 16.1 months). X-ray films showed that all fractures healed and there was no significant difference in the healing time between the two groups ( P>0.05). At last follow-up, the range of motion and Böstman score of the knee joint in group A were significantly better than those in group B ( P<0.05). During follow-up, 1 patient (5.6%) in group A had one anchor mild prolapse and 3 patients (15.0%) occured internal fixation irritation in group B. But there was no significant difference in the incidence of complications between the two groups ( P>0.05). CONCLUSION For the avulsion fractures of the inferior pole of the patella, the suture anchor double-pulley technique combined with suture three-dimensional binding via bone tunnel technique has advantages of reliable fixation, small incision, avoidance of secondary operation to remove internal fixator, and fewer complications, with definite effectiveness.
Humans ; Male ; Female ; Patella/surgery* ; Suture Anchors ; Fracture Fixation, Internal/instrumentation* ; Adult ; Retrospective Studies ; Middle Aged ; Fractures, Avulsion/surgery* ; Treatment Outcome ; Young Adult ; Range of Motion, Articular ; Fracture Healing ; Adolescent ; Suture Techniques ; Knee Joint/physiopathology*

OBJECTIVE: To explore effectiveness of TiRobot-assisted screw implantation in the treatment of coracoid process fractures of the scapula. METHODS: A retrospective analysis was conducted on the clinical data from 24 patients with coracoid process fractures of the scapula admitted between September 2019 and January 2024 and met selection criteria. Among them, 12 patients underwent TiRobot-assisted screw implantation (robot group) and 12 underwent manual screw implantation (control group) during internal fixation. There was no significant difference ( P>0.05) in baseline data such as gender, age, body mass index, disease duration, cause of injury, coracoid process fracture classification, and proportion of patients with associated injuries between the two groups. The incision length, operation time, intraoperative blood loss, hospital stay, accuracy of screw placement, coracoid process fracture healing time, and complications were recorded and compared, as well as pain visual analogue scale (VAS) score, and Constant-Murley score at last follow-up. RESULTS: The intraoperative blood loss and incision length in the robot group were significantly lower than those in the control group ( P<0.05); however, there was no significant difference in operation time and hospital stay between the two groups ( P>0.05). All patients were followed up 8-27 months (mean, 17.5 months), and the difference in follow-up time between the two groups was not significant ( P>0.05). At last follow-up, the VAS score for shoulder pain in the robot group was signifncatly lower compared to the control group, and the Constant-Murley score was significantly higher ( P<0.05). In the robot group, 16 screws were implanted intraoperatively, while 13 screws were implanted in the control group. Radiographic re-evaluation showed that the excellent and good rate of screw implantation was higher in the robot group (93.8%, 15/16) than in the control group (61.5%, 8/13), but the difference in the precision of screw implantation between the two groups was not significant ( P>0.05). Four patients in the robot group and 1 in the control group achieved double screws fixation; however, the difference in achieving double screws fixation between the two groups was not significant ( P>0.05). All fractures healed in both groups with 1 case of malunion in the control group. There was no significant difference in healing time between the two groups ( P>0.05). During follow-up, 1 patient in the control group experienced screw loosening and displacement. There was no significant difference in the incidence of screw loosening and fracture malunion between the two groups ( P>0.05). CONCLUSION Compared with manual screw implantation, TiRobot-assisted minimally invasive treatment of coracoid process fractures of the scapula can reduce intraoperative blood loss, shorten incision length, alleviate pain, and obtain better promote shoulder joint functional recovery.
Humans ; Male ; Female ; Retrospective Studies ; Fracture Fixation, Internal/instrumentation* ; Minimally Invasive Surgical Procedures/instrumentation* ; Adult ; Middle Aged ; Fractures, Bone/surgery* ; Bone Screws ; Coracoid Process/surgery* ; Robotic Surgical Procedures/methods* ; Scapula/surgery* ; Treatment Outcome ; Operative Time ; Young Adult ; Length of Stay ; Blood Loss, Surgical

OBJECTIVE: To compare the short-term effectiveness between Gamma 3 intramedullary nails and Gamma 3 U-Blade system in the treatment of osteoporotic intertrochanteric fractures in the elderly. METHODS: A retrospective analysis was conducted on the clinical data of 124 elderly patients with osteoporotic intertrochanteric fractures, who were admitted between February 2020 and February 2023 and met the selection criteria. The fractures were fixed with Gamma 3 intramedullary nails in 65 patients (control group) and Gamma 3 U-Blade systems in 59 patients (UB group). The differences between the two groups were not significant in age, gender, body mass index, American Society of Anesthesiologists (ASA) classification, bone mineral density, time from injury to operation, fracture classification, and affected side ( P>0.05). The operation time, intraoperative blood loss, hospital stay, and fracture healing time were recorded; the tip-apex distance, fracture reduction quality, and lag screw position were evaluated on X-ray films at immediate after operation; the lag screw sliding distance and change value of neck-shaft angle were measured on X-ray films at last follow-up. Harris hip score at 1 year after operation and the occurrence of internal fixation-related complications were compared between the two groups. RESULTS: The operation time, intraoperative blood loss, and hospital stay in the UB group increased compared to the control group, but the differences were not significant ( P>0.05). All patients in both groups were followed up 12-24 months (mean, 17.1 months). At 12 months after operation, there was no significant difference in the Harris hip score between the two groups ( P<0.05). Radiological examination showed that there was no significant difference between the two groups ( P>0.05) in terms of tip-apex distance, fracture reduction quality, and lag screw position. Fractures healed in both groups, and there was no significant difference in healing time ( P>0.05). At last follow-up, the change value of neck-shaft angle and lag screw sliding distance in the UB group were significantly lower than those in the control group ( P<0.05). During follow-up, no related complications occurred in the UB group, while 6 cases (9.2%) in the control group experienced complications, and the difference in the incidence was significant ( P<0.05). CONCLUSION For the osteoporotic intertrochanteric fractures in the elderly, the Gamma 3 U-Blade system fixation can achieve good short-term effectiveness, with better imaging results compared to Gamma 3 intramedullary nails fixation.
Humans ; Retrospective Studies ; Hip Fractures/surgery* ; Male ; Female ; Aged ; Fracture Fixation, Intramedullary/methods* ; Osteoporotic Fractures/surgery* ; Bone Nails ; Bone Screws ; Aged, 80 and over ; Treatment Outcome ; Fracture Healing ; Operative Time ; Length of Stay

OBJECTIVE: To investigate the feasibility and effectiveness of the novel bone hook combined with finger-guided technique in the treatment of irreducible intertrochanteric femoral fractures in elderly. METHODS: Between January 2021 and August 2023, 23 elderly patients with irreducible intertrochanteric femoral fractures were treated with the novel bone hook combined with finger-guided technique. There were 10 males and 13 females; the age ranged from 68 to 93 years (mean, 76.2 years). The time from injury to operation ranged from 36 to 76 hours (mean, 51.2 hours). According to the classification standard proposed by TONG Dake et alin 2021, there were 10 cases of typeⅠA, 1 case of typeⅠB, 6 cases of type ⅡA, 4 cases of type ⅡB, and 2 cases of type ⅡC. The operation time, intraoperative blood loss, intraoperative fluoroscopy frequences, and quality of fracture reduction were recorded. The fracture healing time and occurrence of postoperative complications were observed during follow-up. At last follow-up, the Harris scoring system was used to evaluate the hip joint function. RESULTS: The operation time was 42-95 minutes (mean, 52.1 minutes). The intraoperative blood loss was 40-420 mL (mean, 126.5 mL). Intraoperative fluoroscopy was performed 14-34 times (mean, 20.7 times). According to the criteria proposed by Chang et al, the quality of fracture reduction was rated as good in 20 cases and acceptable in 3 cases. All patients were followed up 6-20 months (mean, 10.2 months). X-ray film showed that all fractures healed with the healing time of 3.0-5.5 months (mean, 4.0 months). At last follow-up, the Harris score of the hip joint ranged from 82 to 97 points (mean, 90.4 points). Among them, 14 cases were rated as excellent and 9 cases as good. No complication such as coxa vara, cutting of the cephalomedullary nail, nail withdrawal, or nail breakage occurred during follow-up. CONCLUSION The treatment of elderly patients with irreducible intertrochanteric femoral fractures by using the novel bone hook combined with finger-guided technique can achieve high-quality fracture reduction and fixation, and has a good effectiveness.
Humans ; Male ; Female ; Aged ; Aged, 80 and over ; Hip Fractures/diagnostic imaging* ; Fracture Fixation, Internal/instrumentation* ; Fracture Healing ; Treatment Outcome ; Operative Time ; Fracture Fixation, Intramedullary/instrumentation* ; Bone Nails ; Postoperative Complications/epidemiology* ; Feasibility Studies ; Fingers