ObjectiveTo systematically evaluate the methodological quality and measurement properties of traditional Chinese medicine （TCM） syndrome efficacy evaluation scales， and to provide evidence-based references for selecting high-quality assessment tools in TCM clinical practice. MethodsChina National Knowledge Infrastructure （CNKI）， Wanfang Data， VIP Database， Chinese Biomedical Literature Database （CBM）， PubMed， the Cochrane Library， Embase， and Web of Science were searched from inception to April 2， 2025， for studies evaluating the measurement properties of TCM syndrome efficacy evaluation scales. Data were extracted， and the methodological quality and measurement properties of the included scales were assessed according to the consensus-based standards for the selection of health measurement instruments （COSMIN）. Recommendation levels were formulated based on the grading of evidence. ResultsA total of 46 studies were included， involving 22 generic syndrome efficacy evaluation scales and 24 disease-specific syndrome efficacy evaluation scales. None of the scales reported cross-cultural validity or measurement error. According to the recommendation grades， 2 scales met Grade A recommendations and are suggested for clinical use； 38 scales were classified as Grade B， indicating potential applicability but requiring further validation； and 6 scales were classified as Grade C， suggesting the need for further refinement. ConclusionExisting TCM syndrome efficacy evaluation scales exhibit substantial variability in methodological quality， incomplete reporting of measurement properties， and insufficient attention to scale revision. Future efforts should emphasize standardized design in the development of TCM syndrome scales， strengthen validation procedures for key measurement properties， and prioritize dynamic revision of scales， thereby providing high-quality tools to support the precise evaluation of syndrome efficacy.

Objective To investigate the radon activity concentrations in subways of Nanning City and assess the average annual effective doses for subway staff and passengers due to radon exposure. Methods Sixty-three stations across the subway lines 2, 3, and 5 were selected as study sites. Radon activity concentrations were measured using the scintillation counting method with scintillation vials. Results The radon activity concentrations in subway lines 2, 3, and 5 were 7.9-24.4, 12.0-26.2, and 12.6-18.2 Bq/m³, respectively. The average radon activity concentrations for these three lines were (17.4 ± 4.6), (19.1 ± 4.1), and (14.6 ± 1.7) Bq/m³, respectively. Statistical analysis using SPSS 26.0 software revealed a significant difference in radon activity concentrations among these stations (P<0.01). Considering the data in previous research, the average radon activity concentration across all stations in the subway lines of Nanning City was determined to be 17.4 Bq/m³. The estimated average annual effective dose due to radon exposure was 0.131 mSv for subway staff and 0.033 mSv for passengers. Conclusion The radon activity concentrations in the subway lines of Nanning City were significantly lower than the national standard limit (400 Bq/m³). The annual effective doses from radon exposure for both subway staff and passengers were below the limits specified in the Basic Standards for Protection Against Ionizing Radiation and for the Safety of Radiation Sources (GB18871—2002). The health impact of radon and its progeny on subway staff and passengers in the subway lines of Nanning City was extremely low and can be considered negligible.

ObjectiveTo explore the therapeutic effect of Xuebijing injection （XBJ） on severe acute pancreatitis induced acute lung injury （SAP-ALI） by regulating formyl peptide receptors （FPRs）/nucleotide-binding oligomerization domain-like receptor 3 （NLRP3） inflammatory pathway. MethodsSixty rats were randomly divided into a sham group， a SAP-ALI model group， low-， medium-， and high-dose XBJ groups （4， 8， and 12 mL·kg^-1）， and a positive drug （BOC2， 0.2 mg·kg^-1） group. For the sham group， the pancreas of rats was only gently flipped after laparotomy， and then the abdomen was closed， while for the remaining five groups， SAP-ALI rat models were established by retrograde injection of 5% sodium taurocholate （Na-Tc） via the biliopancreatic duct. XBJ and BOC2 were administered via intraperitoneal injection once daily for 3 d prior to modeling and 0.5 h after modeling. Blood was collected from the abdominal aorta 6 h after the completion of modeling， and the expression of interleukin （IL）-1β， IL-6， and tumor necrosis factor-α （TNF-α） in plasma was measured by enzyme-linked immunosorbent assay （ELISA）. The amount of ascites was measured， and the dry-wet weight ratios of pancreatic and lung tissue were determined. Pancreatic and lung tissue was taken for hematoxylin-eosin （HE） staining to observe pathological changes and then scored. The protein expression levels of FPR1， FPR2， and NLRP3 in lung tissue were detected by the immunohistochemical method. Western blot was used to detect the expression of FPR1， FPR2， and NLRP3 in lung tissue. Real-time fluorescence quantitative polymerase chain reaction （Real-time PCR） was used to detect the mRNA expression of FPR1， FPR2， and NLRP3 in lung tissue. ResultsCompared with the sham group， the SAP-ALI model group showed significantly decreased dry-wet weight ratio of lung tissue （P<0.01）， serious pathological changes of lung tissue， a significantly increased pathological score （P<0.01）， and significantly increased protein and mRNA expression levels of FPR1， FPR2， and NLRP3 in lung tissue （P<0.01）. After BOC2 intervention， the above detection indicators were significantly reversed （P<0.01）. After treatment with XBJ， the groups of different XBJ doses achieved results consistent with BOC2 intervention. ConclusionXBJ can effectively improve the inflammatory response of the lungs in SAP-ALI rats and reduce damage. The mechanism may be related to inhibiting the expression of FPRs and NLRP3 in lung tissue， which thereby reduces IL-1β and simultaneously antagonize the release of inflammatory factors IL-6 and TNF-α.

Prescription optimization is a crucial aspect in the study of traditional Chinese medicine （TCM） compounds. In recent years， the introduction of mathematical methods， data mining techniques， and artificial neural networks has provided new tools for elucidating the compatibility rules of TCM compounds. The study of TCM compounds involves numerous variables， including the proportions of different herbs， the specific extraction parts of each ingredient， and the interactions among multiple components. These factors together create a complex nonlinear dose-effect relationship. In this context， it is essential to identify methods that suit the characteristics of TCM compounds and can leverage their advantages for effective application in new drug development. This paper provided a comprehensive review of the cutting-edge optimization experimental design methods applied in recent studies of TCM compound compatibilities. The key technical issues， such as the optimization of source material selection， dosage optimization of compatible herbs， and multi-objective optimization indicators， were discussed. Furthermore， the evaluation methods for component effects were summarized during the optimization process， so as to provide scientific and practical foundations for innovative research in TCM and the development of new drugs based on TCM compounds.

OBJECTIVE To explore the effect and potential mechanism of the compatibility of Astragali Radix-Puerariae Lobatae Radix on ferroptosis of liver cells in type 2 diabetes mellitus （T2DM） insulin resistance （IR） rats. METHODS Sixty male SD rats were randomly divided into control group （12 rats） and modeling group （48 rats）. The modeling group was fed with a high- fat diet for 4 consecutive weeks and then given a one-time tail vein injection of 1% streptozotocin to establish T2DM IR model. The model rats were randomly divided into model group， the compatibility of Astragali Radix-Puerariae Lobatae Radix group [QG group， 4.05 g/（kg·d）， intragastric administration]， ferroptosis inhibitor ferrostatin-1 group [Fer-1 group， 5 mg/kg by intraperitoneal injection， once every other day]， the compatibility of Astragali Radix-Puerariae Lobatae Radix+ferroptosis inducer erastin group [QG+erastin group， 4.05 g/（kg·d） by intragastric administration+erastin 10 mg/（kg·d）， intraperitoneal injection]. After 4 weeks of intervention， serum fasting blood glucose （FBG） and fasting insulin （FINS） were measured in each group of rats， and homeostasis model assessment of insulin resistance （HOMA-IR） and the natural logarithm of insulin action index（IAI） were calculated； the serum levels of total cholesterol （TC）， triglyceride （TG）， low-density lipoprotein cholesterol （LDL-C）， high-density lipoprotein cholesterol （HDL-C）， aspartate transaminase （AST） and alanine transaminase （ALT）， Fe2+ and Fe content， glutathione （GSH）， malondialdehyde （MDA） and superoxide dismutase （SOD） levels， NADP+/NADPH ratio and reactive oxygen species （ROS） were determined. The pathological morphology of its liver tissue was observed； the protein expressions of glutathione peroxidase 4 （GPX4）， ferritin heavy chain 1 （FTH1）， long-chain acyl-CoA synthetase 3 （ACSL3）， ACSL4， ferritin mitochondrial （FTMT）， and cystine/glutamate anti-porter （xCT） in the liver tissue of rats were detected. RESULTS Compared with control group， the liver cells in the model group of rats showed disordered arrangement， swelling， deepened nuclear staining， and more infiltration of inflammatory cells， as well as a large number of hepatocyte vacuoles and steatosis； FBG （after medication）， the levels of TC， TG， LDL-C， AST， ALT， FINS， MDA and ROS， HOMA-IR， Fe2+ and Fe content， NADP+/NADPH ratio and protein expression of ACSL4 were significantly increased or up-regulated， while the levels of HDL-C， GSH and SOD， IAI， protein expressions of GPX4， FTH1， ACSL3， FTMT and xCT were significantly reduced or down-regulated （P＜0.01）. Compared with the model group， both QG group and Fer-1 group showed varying degrees of improvement in pathological damage of liver tissue and the levels of the above indicators， the differences in the changes of most indicators were statistically significant （P＜0.01 or P＜0.05）. Compared with QG group， the improvement of the above indexes of QG+erastin group had been reversed significantly （P＜0.01）. CONCLUSIONS The compatibility decoction of Astragali Radix-Puerariae Lobatae Radix can reduce the level of FBG in T2DM IR rats， and alleviate IR degree， ion overload and pathological damage of liver tissue. The above effects are related to the inhibition of ferroptosis.

Nine compounds were isolated and purified from 90% ethanol extract of Alstonia mairei Lévl by using various chromatographic methods, including silica gel, SephadexLH-20, MCI Gel and ODS column chromatography, combined with semi-preparative liquid phase separation methods. Modern spectroscopic methods (1D and 2D NMR, UV, IR, MS, etc.) were used to identify the structures of the isolated compounds. They were identified as mairoside A (1), 3′,6-di-O-sinaloylsucrose (2), myristic acid (3), methyl myristate (4), ethyl myristate (5), 3,4,5-trimethoxycinnamic acid (6), 3,4,5-trimethoxybenzoic acid (7), vinoline (8), kaempferol-3-O-rutinoside (9), among which compound 1 is a new glycoside, compounds 4 and 5 are new natural products, and the nuclear magnetic data of compound 4 were reported for the first time.

This article systematically analyzes the historical evolution of the name， origin， quality evaluation， harvesting， processing and other aspects of Picrorhizae Rhizoma by referring to the medical books， prescription books， and other documents of the past dynasties， combined with relevant modern research materials， in order to provide a basis for the development and utilization of famous classical formulas containing this medicinal herb. The research results indicate that Picrorhizae Rhizoma was first recorded in New Revised Materia Medica from the Tang dynasty. Throughout history， Huhuanglian has been used as its official name， and there are also aliases such as Gehu Luze， Jiahuanglian and Hulian. The main source of past dynasties is the the rhizomes of Picrorhiza kurrooa and P. scrophulariiflora. In ancient times， Picrorhizae Rhizoma was mainly imported by foreign traders via Guangzhou and other regions， and also produced in China， mainly in Xizang. In ancient times， it was harvested and dried in early August of the lunar calendar， while in modern times， it is mostly harvested from July to September， with the best quality being those with thick and crispy rhizomes without impurities， and bitter taste. Throughout history， Picrorhizae Rhizoma was collected， washed， sliced， and dried before being used as a raw material for medicine， it has a bitter and cold taste， mainly used to treat bone steaming， hot flashes， infantile chancre fever， and dysentery. There is no significant difference in taste and efficacy between ancient and modern times. Based on the research results， it is recommended that the rhizomes of P. scrophulariiflora in the 2020 edition of Chinese Pharmacopoeia， or the rhizomes of P. kurrooa， can be used in famous classical formulas containing this medicinal herb， which can be processed according to the processing requirements marked by the original formula. For those without clear processing requirements， the dried raw products are used as medicine.

Background Work-related musculoskeletal disorders (WMSDs), as one of the major occupational health issues worldwide, have shown an increasing positive rate year by year. Due to the unique demands of work, operating room nurses exhibit a higher positive rate of WMSDs compared to other occupational groups, necessitating active attention and intervention. Objective To estimate the prevalence of WMSDs among operating room nurses in tertiary hospitals, explore the characteristics and latent categories of WMSDs, and analyze the influencing factors associated with the occurrence of WMSDs. Method Using a randomized cluster sampling method, operating room nurses from nine tertiary hospitals in Urumqi were selected as study participants between December 2023 and January 2024. Data were collected through a general information questionnaire, an ergonomic questionnaire for operating room nurses, and the Chinese Musculoskeletal Disorders Questionnaire. Latent class analysis was employed to examine the patterns of WMSDs among the nurses, while chi-square test and multinomial logistic regression were utilized to analyze the influencing factors of WMSDs. Result A total of 411 valid questionnaires were collected in this survey. The positive rate of WMSDs among operating room nurses in the tertiary hospitals of Urumqi over the past year was 91.9%. The positive rates, ordered from highest to lowest by body region, were neck (79.1%), shoulders (70.3%), and lower back (68.1%). The operating room nurses were categorized into three distinct groups by latent class analysis: multi-site pain group, neck-shoulder-back pain group, and neck and lower back pain group. The results of the multinomial logistic regression models revealed that gender, job strain level, ergonomic load level in the operating room, and exposure to cold or drafty working conditions or not were significant influencing factors for reporting WMSDs among operating room nurses. Specifically, having less than 5 years of work experience, low ergonomic load level, low job strain, and moderate job strain were identified as protective factors against WMSDs. Conversely, exposure to cold or drafty working environments and being female were identified as risk factors for WMSDs. The logistic regression models also indicated that compared to the neck-lower back pain group, the neck-shoulder-back pain group had a higher probability of reporting low job strain (OR=0.168, 95%CI: 0.029, 0.968) and being female (OR=4.847, 95%CI: 2.506, 9.378). In contrast, when comparing to the neck-lower back pain group, the multi-site pain group had a higher probability of reporting, low-level ergonomic workload (OR=0.079, 95%CI: 0.015, 0.412), low job strain (OR=0.019, 95%CI: 0.002, 0.145), moderate job strain (OR=0.080, 95%CI: 0.016, 0.401), high job strain (OR=0.132, 95%CI: 0.027, 0.647), less than 5 years of work experience (OR=0.173, 95%CI: 0.044, 0.683), being female (OR=2.424, 95%CI: 1.130, 5.200), and exposure to cold or drafty working environments (OR=3.277, 95%CI: 1.657, 6.481). Conclusion The positive rate WMSDs among operating room nurses in tertiary hospitals is notably high in Urumqi, with distinct co-occurrence characteristics observed within the population. To mitigate the risk of WMSDs, it is essential to implement targeted health education and prevention training programs tailored to different patterns of WMSDs. Additionally, improving working conditions, optimizing human resource allocation , and other proactive measures should be undertaken. These efforts will effectively reduce the incidence of WMSDs among operating room nurses and safeguard their occupational health.

BACKGROUND:Cervical disc herniation can cause pain in the neck and shoulder area,as well as radiating pain in the upper limbs.The incidence rate is increasing year by year and tends to affect younger individuals.Fully understanding the biomechanical characteristics of the cervical spine in adolescents is of great significance for preventing and delaying the onset of cervical disc herniation in this age group. OBJECTIVE:To reconstruct cervical spine models for both healthy adolescents and adolescent patients with cervical disc herniation utilizing finite element analysis techniques,to analyze the motion range of the C1-T1 cervical vertebrae as well as the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and the cartilage of the small joints. METHODS:A normal adolescent's cervical spine and an adolescent patient with cervical disc herniation were selected in this study.The continuous scan cervical spine CT raw image data were imported into Mimics 21.0 in DICOM format.The C1-T1 vertebrae were reconstructed separately.Subsequently,the established models were imported into the 3-Matic software for disc reconstruction.The perfected models were then imported into Hypermesh software for meshing of the vertebrae,nucleus pulposus,annulus fibrosus,and ligaments,creating valid geometric models.After assigning material properties,the final models were imported into ABAQUS software to observe the joint motion range of the C1-C7 cervical vertebrae segments under different conditions,and to analyze the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and small joint cartilage of each cervical spine segment. RESULTS AND CONCLUSION:(1)In six different conditions,the joint motion range of the C1 vertebra in the cervical spine models of both normal adolescent and adolescent patient with cervical disc herniation was higher than that of the other vertebrae.Additionally,the joint motion range of each cervical spine segment in normal adolescent was greater than that in adolescent patient with cervical disc herniation.(2)In the cervical spine model of normal adolescent,the maximum stress values in the annulus fibrosus and nucleus pulposus were found on the left side during C2-3 flexion conditions(0.43 MPa and 0.17 MPa,respectively).In the cervical spine model of adolescent patient with cervical disc herniation,the maximum stress values were found on the left side during C7-T1 flexion conditions(0.54 MPa and 0.18 MPa,respectively).(3)In the cervical spine model of normal adolescent,the maximum stress value on the endplate was found on the left side of the upper endplate of C3 during flexion conditions(1.46 MPa).In the model of adolescent patient with cervical disc herniation,the maximum stress value on the endplate was found on the left side of the lower endplate of C7 during flexion conditions(1.32 MPa).(4)In the cervical spine model of normal adolescent,the maximum stress value in the small joint cartilage was found in the C2-3 left rotation conditions(0.98 MPa).In adolescent patient with cervical disc herniation,the stress in the small joint cartilage significantly increased under different conditions,especially in C1-2,with the maximum stress found during left flexion(3.50 MPa).(5)It is concluded that compared to normal adolescent,adolescent patient with cervical disc herniation exhibits altered cervical curvature and a decrease in overall joint motion range in the cervical spine.In adolescent with cervical disc herniation,there is a significant increase in stress on the annulus fibrosus,nucleus pulposus,and endplates in the C7-T1 segment.The stress on the left articular cartilage of the C1-2 is notable.Abnormal cervical curvature may be the primary factor causing these stress changes.

Background: The transvenous approach to the treatment of cerebral arteriovenous malformation (AVM) is difficult and requires strict blood pressure and blood flow control; however, the cure rate is very high. Appropriate blood pressure control techniques can greatly benefit these patients.Case: A 55-year-old male patient was found to have an aneurysm complicated with a cerebral AVM (length: 2.0 cm, width: 1.6 cm, height: 1.2 cm). Aneurysm embolization was considered for the first-stage surgery and transvenous AVM embolization for the second-stage surgery. Rapid ventricular pacing (RVP) provided a stable blood flow environment for the surgery, which was completed successfully. Conclusion RVP can thus provide an ideal condition for the embolization of cerebral AVM through the transvenous approach and can be a viable surgical option.