Objective To investigate the microbial contamination and its influencing factors of indoor air in public places in Xi'an City, to assess the health risk of employees, and to provide a scientific basis for improving the indoor environment of public places. Methods Total bacterial count and total fungal count in indoor air were monitored in hotels/inns, shopping malls/supermarkets, gyms, and waiting rooms in Xi'an from 2023 to 2024. The health risk assessment of employees was evaluated according to the Chinese Population Exposure Parameters Manual (Adult Volume). Results Overall, the standard-exceeding rate of total bacterial count in Xi'an was 3.85%, and the median values of total bacterial count and total fungal count were 350 CFU/m3 and 300 CFU/m3, respectively. The results of the generalized linear model showed that high indoor temperature and PM10 levels were associated with increased indoor bacterial concentrations (β>0, P<0.05), while high daily passenger flow, and high indoor relative humidity and PM₁₀ levels were associated with increased indoor fungal concentrations (β>0, P<0.05). The multivariate logistic regression showed that high levels of indoor bacterial and fungal concentrations were risk factors for respiratory discomfort among employees. The hazard quotient (HQ) values for all types of public places were less than 1, indicating that the health risk of microbial aerosol exposures for employees was relatively low. Conclusion The indoor microbial pollution in public places in Xi'an is relatively mild, but countermeasures still need to be taken to reduce indoor air microbial contamination.

ObjectiveTo investigate the role of DEAD-box helicase 3 X-linked （DDX3X） in immune-mediated liver injury （ILI）， and to clarify its mechanism by regulating endoplasmic reticulum stress （ERS）-dependent apoptotic pathway and its association with the clinical progression of hepatitis B. MethodsMice were given injection of concanavalin A （ConA） via the caudal vein to establish a model of ILI， PBS （control group） and different concentrations of ConA were injected into the tail vein of hepatocyte-specific DDX3X-knockout mice （DDX3X^ΔHep and DDX3X-flox mice （DDX3X^fl/fl）， respectively.. The log-rank survival analysis， measurement of the serum levels of aspartate aminotransferase （AST） and alanine aminotransferase （ALT）， and HE staining of liver tissue were performed to assess liver injury， and qRT-PCR and Western Blot were used to measure the mRNA and protein expression levels of glucose-regulated protein 78 （GRP78）， CCAAT/enhancer-binding protein homologous protein （CHOP）， and DDX3X in liver tissue. Intraperitoneal injection of 4-phenylbutyric acid （4-PBA， 100 mg/kg） was performed to inhibit ERS. Serum samples （n=30） and liver tissue samples （n=6） were collected from healthy controls， chronic hepatitis B （CHB） patients， and hepatitis B virus-associated liver failure （HBV-LF） patients； ELISA was used to measure the serum level of DDX3X， and qRT-PCR/Western Blot was used to analyze the expression of targets in liver tissue. A one-way analysis of variance was used for comparison of continuous data between multiple groups， and the least significant difference t-test was used for further comparison between two groups. ResultsCompared with the control group of mice， the expression of DDX3X in the liver of mice induced by ConA was significantly increased after liver injury （P<0.05）， and hepatocyte-specific DDX3X knockout increased the 72-hour survival rate of mice by 55% （compared with 20% in the DDX3X^fl/fl group）， with significant reductions in the serum levels of ALT and AST （P<0.000 1） and the expression levels of the ERS markers GRP78 and CHOP （P<0.05）. After ERS was inhibited by 4-PBA， there was alleviation of liver injury （with reductions in ALT and AST， P <0.001） and a reduction in DDX3X expression （P<0.01）. The analysis of clinical samples showed that the mRNA and protein expression levels of liver DDX3X in CHB patients and HBV-LF patients were significantly higher than those in healthy controls （all P<0.01）， and there was a significant increase in the serum level of DDX3X in HBV-LF patients （P<0.000 1）. ConclusionDDX3X exacerbates ILI by regulating the ERS-dependent apoptotic pathway （GRP78/CHOP）， and its expression is associated with the progression of hepatitis B. Therefore， it can be used as a potential therapeutic target.

According to traditional Chinese medicine （TCM） theory， impaired spleen transportation function disrupts nutrient distribution， causing metabolic accumulation of lipids that transform into pathogenic phlegm-dampness. These pathological factors disseminate through the San Jiao and obstruct meridian pathways， ultimately forming the pathogenesis described as "all disorders involve phlegm". Phlegm and dampness share common pathogenic origins but manifest distinct clinical manifestations. Dampness， as the precursor， may congeal into phlegm， while existing phlegm accumulation can further exacerbate dampness stagnation， thereby establishing a self-perpetuating pathological cycle. Modern medical research has confirmed that the essence of "phlegm-dampness" syndrome is closely associated with energy metabolism disorders， serving as a common pathological basis for metabolic syndrome， type 2 diabetes mellitus， atherosclerosis， and other major chronic diseases. As a crucial vehicle for medical experimental research， disease-syndrome combination animal models serve as an indispensable means to advance the modernization of TCM. Currently， based on classical theories such as "rich and greasy foods produce phlegm" and "physical coldness combined with cold consumption causes external pathogens to invade the skin and hair， thereby generating internal dampness"， researchers primarily employ two paradigms to construct animal models of phlegm-turbidity， dampness obstruction， and phlegm-dampness syndromes： the first involves simulating TCM etiological factors （through methods like dietary irregularities， imblanace between work and rest， and combined internal-external dampness exposure）， while the second combines disease with syndrome differentiation （inducing pathological changes through physical， chemical， or biological interventions）. Through comprehensive evaluation incorporating macroscopic observation and microscopic index detection， model animals undergo systematic biological and pathological assessment， with further syndrome type verification achieved via the "prescription-based syndrome detection" approach. However， existing models still exhibit significant deficiencies in both the standardization of modeling methodologies and the systematization of evaluation criteria. This paper reviews the strategies for constructing "phlegm-dampness" syndrome animal models and their corresponding evaluation indices， focusing on the pathological correlations among different modeling approaches. The aim is to provide methodological guidance for research on TCM syndromes related to "phlegm-dampness" syndrome and to support the development of TCM therapies for resolving phlegm and eliminating dampness. This study not only contributes to advancing the standardization of TCM syndrome research but also provides crucial technical support for the modernization of TCM.

Objective To design a custom 3D printed monoblock acetabular implant for reconstructing PaproskyⅢA acetabular bone defects and to analyze the stress distribution,displacement,and clinical reliability of the implant and surrounding bone using finite element analysis(FEA).Methods Bilateral hip computed tomography(CT)data of a patient with PaproskyⅢA acetabular bone defects were collected.Models were developed and analyzed using Mimics Medical 21.0,Geomagic Wrap 2021,Solidworks 2023,and ANSYS Workbench 2022 R1 softwares.The biomechanical performance of the custom 3D printed monoblock acetabular implant was simulated under a single-leg stance condition.Results The peak von Mises stress of the hip components was observed at the femoral stem,measuring 67.318 MPa.For the custom 3D printeded monoblock acetabular implant,the peak stress was located at the anterosuperior contact area between the implant and acetabular bone,measuring 6.935 MPa.The femoral stem exhibited a peak stress of 67.318 MPa at its junction with the femoral head.The liner's peak stress was 1.333 MPa near the fixation of screw 9 at the superior part of the acetabular cup.The screws showed a peak stress of 2.215 MPa at the junction with the implant.For the cortical bone,the peak stress was 9.844 MPa at the distal femur,while the cancellous bone exhibited a peak stress of 0.701 MPa at its distal connection with the femoral stem.The pelvic bone's peak stress was 8.002 MPa at the anterior transition zone between the normal acetabulum and the defect.The peak micromotion of the custom 3D printed monoblock acetabular implant at its posterosuperior area,measuring 0.114 mm.The femoral stem and head exhibited a peak micromotion of 0.132 mm at the contact interface with the acetabular liner.The micromotion range at the implant-acetabular bone interface was 0.098 mm to 0.131 mm.Conclusion Under a simulated single-leg stance condition,the stress distribution in all components and the acetabular bone surface remains below their respective yield strengths.The micromotion threshold between the acetabular cup and acetabular bone is within acceptable limits.Biomechanical analysis indicates that the patient can perform early weight-bearing rehabilitation postoperatively.However,walking or jogging rehabilitation should be approached with caution.

Objective To compare the effects of main artery clamping(MAC)and selective artery clamping(SAC)strategies on postoperative renal function in patients with chronic renal insufficiency undergoing robot-assisted partial nephrectomy.Methods A retrospective cohort study was conducted on 231 patients with preoperative chronic renal insufficiency[eGFR<90 mL/(min·1.73 m2)with renal injury markers or eGFR<60 mL/(min·1.73 m2)]who underwent robot-assisted partial nephrectomy in the Department of Urology of the First Affiliated Hospital of Army Medical University from February 2018 to February 2024.According to intraoperative renal artery clamping strategy,they were divided into a MAC group(n=129)and a SAC group(n=102).Preoperatively,individualized renal artery clamping strategies were developed using a machine learning-based multimodal holographic 3-D reconstruction technique.Serum creatinine(Scr)level was measured at 3 d and 3 months after surgery,and estimated glomerular filtration rate(eGFR)was calculated using the chronic kidney disease epidemiology collaboration equation(CKD-EPI)formula.Renal dynamic imaging with 99mTc-DTPA or 99mTc-MAG3 was used to assess the GFR of the affected kidney.Results At 3 d after surgery,the decrease in GFR of the affected kidney was significantly lower[(8.3±7.7)vs(16.0±10.2)mL/(min·1.73 m2),95%CI:-10.2～-5.2,P<0.001]in the SAC group than the MAC group.Scr increment analysis showed that the SAC group exhibited notably lower Scr increase[8.2(2.5,18.7)vs 15.5(5.8,28.3)μmol/L,95%CI:-12.3～-1.8,P=0.027],and milder eGFR decline[3.0(0.5,7.8)vs 7.5(2.0,14.3)mL/(min·1.73 m2),95%CI:-6.2～-0.8,P=0.015].And,in 3 months after surgery,the SAC group had lower Scr level[(89.2±23.1)vs(95.3±22.1)μmol/L,95%CI:-11.9～-0.3,P=0.042],and higher GFR of the affected kidney[(33.5±10.5)vs(26.1±10.9)mL/(min·1.73 m2),95%CI:4.6～10.2,P<0.001].Conclusion For patients with chronic renal insufficiency undergoing robot-assisted partial nephrectomy,SAC strategy is superior to MAC strategy in protecting postoperative renal function without increasing surgical risk.

Travelling wave structures for lossless ion manipulations(TW-SLIM)employ travelling wave electric fields to propel ions forward,enabling exceptionally long transmission paths and holding great potential for applications in material transportation and separation.In this study,different from previous studies focusing on the transport performance of macromolecules such as proteins in TW-SLIM,the transmission performance of small molecules(<200 amu)was investigated and analyzed in the turning TW-SLIM through the COMSOL simulation platform,to explore the influence of electrostatic field of protective electrode and radio frequency(RF)electric field on ion transport efficiency,and obtain the optimal value.Compared to macromolecules,small molecules required lower voltage amplitudes from guard electrodes but stricter requirements in terms of the peak-to-peak amplitude and frequency of RF voltage for lossless transmission.Using dimethyl methylphosphonate(DMMP)as a sample and testing it on the TW-SLIM experimental platform,when the protective voltage amplitude was 5 V and the peak-to-peak voltage of the radio-frequency electrode was 440 V at 1.5 MHz,the ion transmission efficiency reached 100%,achieving lossless transmission.The experimental results provided valuable references for application of TW-SLIM in separation and detection of small molecular substances,such as explosives and drugs.

In this study,indigo-dyed cotton and silk textiles were subjected to simulated aging treatments by ultraviolet light(UV)and hydrochloric acid solution(pH=2)according to the potential preservation environments of ancient textile cultural relics.Scanning electron microscope(SEM)was used for microstructural observation of the simulated textiles,and a combination method of ultra-high performance liquid chromatography-quadrupole time-of-flight mass spectrometry(UPLC-Q-TOF-MS)and portable Raman spectroscopy(P-RS)was developed for detection of indigo dye in cotton and silk textiles before and after aging.The results revealed that,in silk samples after UV aging and acid aging,the indigo dye along with isatin which was the indigo degradation product could be detected by UPLC-Q-TOF-MS,while in cotton samples after UV aging and acid aging,the signal of isatin was less prominent although the characteristic peaks of indigo were detectable.However,the characteristic signals of indigo in both UV-aged and acid aged textiles could be effectively detected by P-RS,which provided a quick and convenient method for detection of indigo dye in textiles.Compared with UV aging and acid aging,acid-aged samples exhibited a more robust signal response to indigo dye,offering a rapid and non-destructive method for indigo detection.The developed UPLC-Q-TOF-MS and P-RS methods could be used in efficient and rapid identification of indigo dye,which hold potential in the preservation and restoration of ancient textile cultural relics.

In the field of substance detection,ion dissociation techniques have become crucial for enhancing qualitative accuracy.By applying external energy to induce dissociation of ions in the substance being analyzed,the internal structural information can be obtained,thereby improving qualitative capabilities.Current research on ion dissociation techniques primarily focuses on tandem mass spectrometry,which typically requires a vacuum environment.However,research on ambient ion dissociation techniques is less developed,with some progress made in the field of tandem ion mobility spectrometry.Recently,the development of field-induced dissociation(FID)in this area has enabled ambient dissociation of various explosive and volatile alcohol ions.Nevertheless,the limitation imposed by the maximum breakdown field of air restricts the energy of the electric field,making it challenging to dissociate ions with high energy requirements,such as those of drugs.To address this issue,in this work,an ambient heat-induced dissociation(HID)technique based on high temperatures was proposed,in which an ambient ion heat-induced dissociation unit was developed and integrated into a home-made ion trap mass spectrometer.Experiments were conducted on four representative drug samples,e.g.methamphetamine,heroin,cocaine,and ketamine.The parent ions mass spectra,low vacuum collision-induced dissociation(CID)mass spectra and ambient HID mass spectra for each sample were obtained.By analyzing and comparing the fragmentation products from ambient and low vacuum dissociation,the feasibility of the ambient HID technique was verified.This technique provided a method for ion dissociation in single mass analyzers without tandem mass spectrometry capability and offered a new research direction for the future development of tandem ion mobility spectrometry.

Nano liquid chromatography-high resolution tandem mass spectrometry(LC-HRMS/MS)is widely used for body fluid peptidome analysis,yet the impact of replicate analyses remains overlooked.Using salivary peptidome,in this work,10 replicate analyses of the same sample were conducted.It was found that although m/z and molecular weight ranges were consistent across replicates,single runs identified only 348-576 unique peptides from 32-39 degraded proteins.Merging all replicates revealed 1237 peptides from 77 proteins,a 2.5 folds increase in peptides and 2 folds increase in proteins.Instrument stability was confirmed via intensity/retention time of 12 peptides.Merged peptides primarily derived from high-abundance proteins(e.g.,Statherin,PRP1/2).Analysis of 20 peptides showed that the some peptides were detected in single analysis but confidence varying(19%-99%),low-confidence peptides(<95%)exceeded 95%after replicate.signal intensity alone didn't determine confidence and peptides spanning the sequence region between the longest and the shortest detected fragments could be identified.The above findings suggested that single-run LC-MS peptidomics analysis carried inherent false negatives and uncertainties.However,by integrating the results of a single analysis with the mechanism of enzymatic hydrolysis for endogenous peptides,it was possible to make reasonable inferences and extrapolations regarding peptides derived from highly abundant degraded proteins.

Objective To compare the application effects of plankton multiplex polymerase chain reac-tion-capillary electrophoresis(PCR-CE),SYBR Green Ⅰ real-time quantitative PCR(qPCR)and microwave digestion-vacuum filtration-automated scanning electron microscopy(MD-VF-Auto SEM)in the diagnosis of drowning.Methods Lung,liver and kidney tissues from 212 drowned corpses and 30 non-drowned corpses were examined respectively by the three drowning-related plankton testing methods,and the detection rates of plankton in each tissue by three methods were compared.Results In drowned corpses,the total detection rates of PCR-CE,qPCR,and MD-VF-Auto SEM were 93.9%,96.2%,and 95.3%,respectively,with no statistically significant difference(P>0.05).The detection rate of lung tissue by MD-VF-Auto SEM(100%)was higher than those of PCR-CE and qPCR(P<0.05),and there was no significant difference in the detection rates of the three methods in liver or kidney tissues(P>0.05).In non-drowning corpses,a small number of diatoms(less than 10 cells/10 g)were detected by MD-VF-Auto SEM method,only in liver and kidney tissues,while the other two methods yielded negative results for all tissues.Conclusion All three methods have good efficacy in the examination of drowned corpses.The MD-VF-Auto SEM method directly observes diatom morpho-logical characteristics through scanning electron microscopy,and the qualitative and quantitative analy-ses are intuitive and accurate.It has great advantages in the examination of difficult degradation samples.The PCR-CE method and qPCR method have a low sample demand(0.5 g),are easy to operate and have short detection time(4-7 h).They are easy to be applied in the grassroots depart-ments and are suitable for the rapid determination of drowned corpses in routin cases.The combina-tion of the two DNA methods with the MD-VF-Auto SEM method can increase the detection rate of plankton,ensuring the reliability of examination results.This combined use is of significant importance in the application of drowning diagnosis.