Background Meteorological factors are among the key extrinsic triggers for the onset and exacerbation of cardiovascular and cerebrovascular diseases (CVD). Against the backdrop of sustained global warming, elucidating the impact of ambient temperature and atmospheric pressure on CVD, especially on pre-hospital CVD emergent events, has become imperative for evidence-based prevention and emergency preparedness. Objective To quantify the temporal trends of daily mean temperature and atmospheric pressure and their associations with pre-hospital CVD emergent events in Yantai, and to explore effect modification by demographic subgroups and geographic areas, thereby providing an empirical basis for the rational allocation of emergency medical resources. Methods Pre-hospital CVD emergency data from January 1, 2016 to December 31, 2022 were selected from the Yantai 120 Emergency Medical Command System. Synchronous meteorological factors and environmental pollutant data were obtained from the websites of the National Oceanic and Atmospheric Administration and the National Centers for Environmental Information of the United States. Time-series analysis combined with distributed lag non-linear model was used to analyze the association between daily temperature, atmospheric pressure, and pre-hospital CVD emergencies. Average annual percentage changes (AAPC) were calculated using Joinpoint (version 5.2.0.0) to reflect temporal trends. Spearman correlation analysis was employed to screen variables with low collinearity for inclusion in the multi-pollutant adjusted models. Results From 2016 to 2022, a total of 268275 pre-hospital CVD emergency cases were recorded in Yantai City, showing an increasing annual trend (AAPC=7.16%, P=0.002). Emergency volume, daily temperature, atmospheric pressure, and PM₁₀ displayed marked seasonal patterns, with summer bottoms and winter peaks for emergencies, daily temperature higher in summer and lower in winter, and the inverse for atmospheric pressure. Correlation analysis showed that both daily temperature and atmospheric pressure were positively correlated with O₃, with correlation coefficients of 0.745 and 0.723, respectively; negatively correlated with PM_2.5, with correlation coefficients of −0.246 and −0.235, respectively; and negatively correlated with PM₁₀, with correlation coefficients of −0.241 and −0.229, respectively (P < 0.05). A U-shaped correlation was revealed between daily temperature and pre-hospital CVD emergency risk. Using 24 °C as the reference, risk was elevated at both low and high daily temperatures, with the strongest cold effect at –11 ℃ (RR=1.53, 95%CI: 1.35, 1.73) and strongest heat effect at 30 ℃ (RR=1.06, 95%CI: 1.01, 1.11); cold effects were prolonged (lag0–14d) compared to heat effects. Atmospheric pressure exhibited a positive association with emergencies; using a median of 1012.2 hPa as the reference, the maximum risk occurred at 1037 hPa (RR=1.25, 95%CI: 1.03, 1.52), with a 0–5 d lag. In the subgroup analysis, the impact of low temperature was more pronounced among females (RR_{−9 ℃}=1.66), people over 60 years (RR_{−9 ℃}=1.91), and rural residents (RR_{−9 ℃}=1.76). High atmospheric pressure significantly increased the risk of pre-hospital CVD emergency among females (RR_{1035 hPa}=1.54), people under 18 years (RR_{1035 hPa}=3.62), and rural residents (RR_{1035 hPa}=1.46). The sensitivity analysis results indicated that, after excluding the impact of pandemic and the degrees of freedom for time variations, the effects of daily average temperature and atmospheric pressure on pre-hospital CVD emergency volume were consistent with the primary analysis findings. Conclusion Both non-optimal temperature and atmospheric pressure significantly increase the pre-hospital CVD emergency volume; therefore, emergency medical services should develop targeted response protocols, optimize resource allocation, and intensify public health education to mitigate the pre-hospital burden attributable to temperature and pressure fluctuations.

ObjectivePancreatic ductal adenocarcinoma (PDAC) exhibits a limited response to current treatments due to its dense fibrotic stroma and highly immunosuppressive tumor microenvironment. In recent years, advancements in cellular immunotherapy, particularly chimeric antigen receptor macrophage (CAR-M) therapy, have offered new hope for pancreatic cancer treatment. Although CAR-M therapy demonstrates dual potential in directly killing tumor cells and remodeling the immune microenvironment, it still faces challenges such as complex in vitro preparation processes and low in vivo targeting and delivery efficiency. Therefore, developing strategies for efficient and targeted in vivo delivery of CAR genes has become crucial for overcoming current therapeutic limitations. This study aims to develop an orally administrable nano-gene delivery system for the targeted delivery of CAR genes to pancreatic tumor sites. MethodsCore nano-gene particles (PNP/pCAR) were constructed by loading plasmid DNA encoding CAR (pCAR) with cationic polypeptides (PNP). Subsequently, PNP/pCAR was surface-modified with β-glucan to prepare the targeted nanoparticles (βGlus-PNP/pCAR). The loading efficiency of PNP for pCAR was quantitatively assessed by gel retardation assay. The particle size, Zeta potential, morphology, and storage stability of PNP/pCAR were characterized using a Malvern particle size analyzer and transmission electron microscopy. At the cellular level, RAW 264.7 macrophages were selected. The cytotoxicity of PNP/pCAR was evaluated using the CCK-8 assay. The cellular uptake efficiency and lysosomal escape ability of the nanoparticles were assessed via flow cytometry and confocal microscopy. Transfection efficiency was quantitatively evaluated by detecting the expression of the reporter gene GFP using flow cytometry. At the in vivo level, an orthotopic pancreatic cancer mouse model was established. Cy7-labeled βGlus-PNP/pCAR nanoparticles were administered orally, and the fluorescence distribution in mice was dynamically monitored at 1, 2, 4, 8, and 16 h post-administration using a small animal in vivo imaging system. Forty-eight hours after oral gavage, the mice were euthanized, and pancreatic tumor tissues were collected for further analysis of intratumoral fluorescence signals using the imaging system. Additionally, βGlus-PNP/pCAR-GFP nanoparticles loaded with the reporter gene (GFP) were administered orally. Forty-eight hours post-administration, pancreatic tumor tissues were harvested to prepare frozen sections, and GFP expression was observed and analyzed under a fluorescence microscope. ResultsThe PNP carrier exhibited a high loading capacity for pCAR. The successfully prepared PNP/pCAR nanoparticles were regular spheres with a hydrodynamic diameter of approximately (120±10) nm and a Zeta potential of about +(6±1) mV. They maintained good structural stability after incubation in PBS buffer for 7 d. Cell experiments demonstrated that PNP/pCAR exhibited no significant cytotoxicity in RAW 264.7 cells while being efficiently internalized and effectively escaping lysosomal degradation. The transfection positive rate of PNP/pCAR-GFP in RAW 264.7 cells reached (25±3)%, surpassing that of Lipofectamine 2000-loaded pCAR-GFP (Lipo/pCAR-GFP), which was (20±1)%.In vivo experiments revealed that, compared to unmodified PNP/pCAR, βGlus-PNP/pCAR exhibited strongerin situ pancreatic tumor targeting ability after oral administration. Furthermore, oral administration of βGlus-PNP/pCAR-GFP resulted in significant GFP protein expression detectable within pancreatic tumor tissues. ConclusionThis study successfully constructed and validated an orally administrable, pancreatic cancer-targeting polypeptide-based nano-gene delivery system. It provides an important technological foundation in delivery systems and experimental basis for the subsequent development of in situ CAR-M-based therapeutic strategies for pancreatic cancer.

ObjectivePancreatic ductal adenocarcinoma (PDAC) exhibits a limited response to current treatments due to its dense fibrotic stroma and highly immunosuppressive tumor microenvironment. In recent years, advancements in cellular immunotherapy, particularly chimeric antigen receptor macrophage (CAR-M) therapy, have offered new hope for pancreatic cancer treatment. Although CAR-M therapy demonstrates dual potential in directly killing tumor cells and remodeling the immune microenvironment, it still faces challenges such as complex in vitro preparation processes and low in vivo targeting and delivery efficiency. Therefore, developing strategies for efficient and targeted in vivo delivery of CAR genes has become crucial for overcoming current therapeutic limitations. This study aims to develop an orally administrable nano-gene delivery system for the targeted delivery of CAR genes to pancreatic tumor sites. MethodsCore nano-gene particles (PNP/pCAR) were constructed by loading plasmid DNA encoding CAR (pCAR) with cationic polypeptides (PNP). Subsequently, PNP/pCAR was surface-modified with β-glucan to prepare the targeted nanoparticles (βGlus-PNP/pCAR). The loading efficiency of PNP for pCAR was quantitatively assessed by gel retardation assay. The particle size, Zeta potential, morphology, and storage stability of PNP/pCAR were characterized using a Malvern particle size analyzer and transmission electron microscopy. At the cellular level, RAW 264.7 macrophages were selected. The cytotoxicity of PNP/pCAR was evaluated using the CCK-8 assay. The cellular uptake efficiency and lysosomal escape ability of the nanoparticles were assessed via flow cytometry and confocal microscopy. Transfection efficiency was quantitatively evaluated by detecting the expression of the reporter gene GFP using flow cytometry. At the in vivo level, an orthotopic pancreatic cancer mouse model was established. Cy7-labeled βGlus-PNP/pCAR nanoparticles were administered orally, and the fluorescence distribution in mice was dynamically monitored at 1, 2, 4, 8, and 16 h post-administration using a small animal in vivo imaging system. Forty-eight hours after oral gavage, the mice were euthanized, and pancreatic tumor tissues were collected for further analysis of intratumoral fluorescence signals using the imaging system. Additionally, βGlus-PNP/pCAR-GFP nanoparticles loaded with the reporter gene (GFP) were administered orally. Forty-eight hours post-administration, pancreatic tumor tissues were harvested to prepare frozen sections, and GFP expression was observed and analyzed under a fluorescence microscope. ResultsThe PNP carrier exhibited a high loading capacity for pCAR. The successfully prepared PNP/pCAR nanoparticles were regular spheres with a hydrodynamic diameter of approximately (120±10) nm and a Zeta potential of about +(6±1) mV. They maintained good structural stability after incubation in PBS buffer for 7 d. Cell experiments demonstrated that PNP/pCAR exhibited no significant cytotoxicity in RAW 264.7 cells while being efficiently internalized and effectively escaping lysosomal degradation. The transfection positive rate of PNP/pCAR-GFP in RAW 264.7 cells reached (25±3)%, surpassing that of Lipofectamine 2000-loaded pCAR-GFP (Lipo/pCAR-GFP), which was (20±1)%.In vivo experiments revealed that, compared to unmodified PNP/pCAR, βGlus-PNP/pCAR exhibited strongerin situ pancreatic tumor targeting ability after oral administration. Furthermore, oral administration of βGlus-PNP/pCAR-GFP resulted in significant GFP protein expression detectable within pancreatic tumor tissues. ConclusionThis study successfully constructed and validated an orally administrable, pancreatic cancer-targeting polypeptide-based nano-gene delivery system. It provides an important technological foundation in delivery systems and experimental basis for the subsequent development of in situ CAR-M-based therapeutic strategies for pancreatic cancer.

Background: The hypotension prediction index (HPI) is an algorithm designed to predict hypotension. Some studies have reported that HPI-guided hemodynamic management strategies decrease intraoperative hypotension and complications; however, the effect of HPI on reducing perioperative complications is controversial. This meta-analysis aimed to assess the efficacy of the HPI in reducing major complications and intraoperative hypotension. Methods: We conducted this meta-analysis according to the PRISMA statement and Cochrane Handbook guidelines. A comprehensive literature review was conducted to identify studies focusing on the efficacy of HPI-guided management in reducing intraoperative hypotension and postoperative complications. The PubMed, Embase, Scopus, and Web of Science databases were searched, and the resulting data were combined to calculate the pooled mean differences or risk ratios (RRs) with 95% CIs of both randomized controlled trials (RCTs) and retrospective studies, as appropriate. Heterogeneity and potential publication bias were also assessed. Results: Nineteen articles (12 RCTs and 7 retrospective studies) with 2570 recruited patients were included in this meta-analysis. The critical evaluation of the study quality revealed a low risk of bias in the included RCTs. Among the non-randomized trials, one was rated 7, two were rated 8, and the remaining four were rated 9 on the Newcastle-Ottawa Scale, indicating high quality and a low risk of bias. HPI-guided management significantly reduced intraoperative hypotension and associated major complications (RR = 0.79, 95% CI [0.69–0.90], I2 = 0, P < 0.001). Blood loss and length of hospital stay were comparable between the groups. Conclusions HPI-guided management significantly reduced intraoperative hypotension and major complications.

Objective To explore the application effect of a standardized management method based on failure mode and effect analysis （FMEA） in optimizing the whole-process quality control system of the intravenous admixture service （PIVAS）. Methods The quality control management system of the PIVAS was optimized by establishing six quality control groups led by the head nurse, with full participation of pharmacy, nursing, and logistical staff, ensuring comprehensive coverage and traceability of all quality control links. Each group conducted risk priority number （RPN） scoring for potential failure modes in their respective quality control processes, and targeted improvement measures were formulated based on the scoring results. The RPN values of failure modes and quality control-related evaluation indicators before and after implementation were compared to achieve closed-loop management. Results After one year of management, the RPN values of the six major failure modes significantly decreased compared to those before implementation （P<0.05）. The compounding error rate dropped to 0.13%, the dispensing error rate decreased to 0.95%, the compounding efficiency increased to 98%, the delivery time was shortened by 0.45 h per batch, the intervention rate for irrational prescriptions rose to 94.87%, satisfaction improved to 96.78%, and the participation rate of quality control personnel reached 95.36% （P<0.05）. Conclusion FMEA-based identification of potential failure modes in the whole-process quality control system of the IVAS, combined with risk quantification and targeted interventions, significantly reduced high-risk failure modes, improved compounding accuracy and efficiency, and ensured the safety of clinical intravenous medication and the effectiveness of healthcare quality management.

Objective To explore the application effect of a standardized management method based on failure mode and effect analysis （FMEA） in optimizing the whole-process quality control system of the intravenous admixture service （PIVAS）. Methods The quality control management system of the PIVAS was optimized by establishing six quality control groups led by the head nurse, with full participation of pharmacy, nursing, and logistical staff, ensuring comprehensive coverage and traceability of all quality control links. Each group conducted risk priority number （RPN） scoring for potential failure modes in their respective quality control processes, and targeted improvement measures were formulated based on the scoring results. The RPN values of failure modes and quality control-related evaluation indicators before and after implementation were compared to achieve closed-loop management. Results After one year of management, the RPN values of the six major failure modes significantly decreased compared to those before implementation （P<0.05）. The compounding error rate dropped to 0.13%, the dispensing error rate decreased to 0.95%, the compounding efficiency increased to 98%, the delivery time was shortened by 0.45 h per batch, the intervention rate for irrational prescriptions rose to 94.87%, satisfaction improved to 96.78%, and the participation rate of quality control personnel reached 95.36% （P<0.05）. Conclusion FMEA-based identification of potential failure modes in the whole-process quality control system of the IVAS, combined with risk quantification and targeted interventions, significantly reduced high-risk failure modes, improved compounding accuracy and efficiency, and ensured the safety of clinical intravenous medication and the effectiveness of healthcare quality management.

Work serves as a critical means of obtaining resources, facilitating personal growth, realizing self-worth, and engaging in social interactions. However, work-related diseases pose significant threats to workers’ health and productivity, and impose considerable economic burdens. This article categorized work-related diseases into six major types, including musculoskeletal disorders, mental and behavioral disorders, cardiovascular and metabolic diseases, digestive system diseases, reproductive system diseases, and non-specific respiratory diseases, and summarized their risk factors, assessment methods, policy regulation, and prevention and control measures. Current research in this field predominantly relies on cross-sectional studies, which present limitations in causal inference and potential risks of bias. Future studies should expand sample sizes, optimize research designs, and establish multidimensional evaluation systems to comprehensively assess the health and economic impacts of work-related diseases. It is recommended to enhance the translation of research findings into practice, thereby providing a scientific basis for the occupational health protection system and promoting the well-being and sustainable development of the working population.

Nuclear factor-kappa B （NF-κB） is an important intracellular transcription factor widely involved in the processes such as immune response， inflammatory response， cell proliferation， and apoptosis. The abnormal activation of the NF-κB signaling pathway plays a pivotal role in various liver diseases including chronic hepatitis， liver fibrosis， liver cirrhosis， and hepatocellular carcinoma. Extensive studies have shown that inhibiting NF-κB activity may effectively reduce inflammation and fibrosis and improve metabolic disorders. Several natural compounds， such as matrine and salvianolic acid B， have shown the potential in suppressing NF-κB activity， thereby exerting anti-inflammatory， anti-fibrotic， and anti-tumor effects. This article systematically reviews the critical role of the NF-κB signaling pathway in liver diseases and its potential as a therapeutic target， in order to highlight its potential as a therapeutic target for liver diseases and provide new directions for the treatment of liver diseases.