In view of the few studies on the influence of Armillaria spp. infection on the content of the chemical components in different parts of Polyporus umbellatus sclerotia, this study determined the biomass of P. umbellatus sclerotia and the contents of ergosterol, polyporusterone A, polyporusterone B and polysaccharide in the separated cavity wall of the sclerotia and the uninfected part of the sclerotia in different harvesting years under the conditions of A. gallica and A. mellea infection respectively. According to the difference of content and dynamic changes of the polysaccharide and the steroid substances, the superior Armillaria sp. was screened to obtain the best harvest years of P. umbellatus. Using HPLC and UV-VIS spectrophotometry methods, the contents of ergosterol, polyporusterone A, polyporusterone B and polysaccharide in P. umbellatus sclerotia infected by the two Armillaria spp. in different years were determined. In addition, the differentially expressed genes related to P. umbellatus polysaccharide synthesis were screened according to the transcriptomic data of different parts of P. umbellatus after A. mellea infection. With the increase of years, the biomass of sclerotia infected by different Armillaria spp. had significant differences, and there were significant differences in the four components of sclerotia. The four components of the separated cavity wall of the sclerotia were significantly higher than those of the uninfected part. The best harvest time was the third year after cultivation. Transcriptomic analysis showed that the infection of Armillaria spp. could significantly promote polysaccharide synthesis, which provided a basis for polysaccharide content determination at the molecular level. The study clarified the influence of different Armillaria spp. infection on the accumulation of chemical components of P. umbellatus sclerotia, laying a foundation for exploring the symbiosis mechanism and provided a scientific clue for screening superior Armillaria sp. and guiding the artificial cultivation of P. umbellatus sclerotia.

ObjectiveHepatocyte nuclear factor 4-alpha (HNF4A) is a critical transcription factor in the liver and pancreas. Dysfunctions of HNF4A lead to maturity onset diabetes of the young 1 (MODY1). Notably, MODY1 patients with HNF4A pathogenic mutations exhibit decreased responses to arginine and reduced plasma triglyceride levels, but the mechanisms remain unclear. This study aims to investigate the potential target genes transcriptionally regulated by HNF4A and explore its role in these metabolic pathways. MethodsA stable 293T cell line expressing the HNF1A reporter was overexpressed with HNF4A. RNA sequencing (RNA-seq) was performed to analyze transcriptional differences. Transcription factor binding site prediction was then conducted to identify HNF4A binding motifs in the promoter regions of relevant target genes. ResultsRNA-seq results revealed a significant upregulation of transmembrane 4 L six family member 5 (TM4SF5) mRNA in HNF4A-overexpressing cells. Transcription factor binding predictions suggested the presence of five potential HNF4A binding motifs in the TM4SF5 promoter. Finally, we confirmed that the DR1 site in the -57 to -48 region of the TM4SF5 promoter is the key binding motif for HNF4A. ConclusionThis study identified TM4SF5 as a target gene of HNF4A and determined the key binding motif involved in its regulation. Given the role of TM4SF5 as an arginine sensor in mTOR signaling activation and triglyceride secretion, which closely aligns with phenotypes observed in MODY1 patients, our findings provide novel insights into the possible mechanisms by which HNF4A regulates triglyceride secretion in the liver and arginine-stimulated insulin secretion in the pancreas.

Since the promulgation of the first Drug Administration Law of the People's Republic of China 40 years ago in 1984, China has undergone four main stages in the traditional Chinese medicine(TCM) regulation: the initial establishment of TCM regulation rules(1984-1997), the formation of a modern TCM regulatory system(1998-2014), the reform of the review and approval system for new TCM drugs(2015-2018), and the construction of a scientific regulation system for TCM(2019-2024). Over the past five years, a series of milestone achievements of TCM regulation in China have been achieved in the six aspects, including its strategic objectives and the establishment of a science-based regulatory system, the reform of the review and approval system for new TCM drugs, the optimization and improvement of the TCM standard system and its formation mechanism, comprehensive enhancement of regulatory capabilities for TCM safety, international harmonization of TCM regulation and its role in promoting innovation. Looking ahead, centered on advancing TCMRS to establish a sound regulatory framework tailored to the unique characteristics of TCM, TCM regulation will evolve into new reform patterns, advancing and extending across eight critical fronts, including the legal framework and policy architecture, the review and approval system for new TCM drugs, the quality standard and management system of TCM, the comprehensive quality & safety regulation and traceability system, the research and transformation system for TCMRS, AI-driven innovations in TCM regulation, the coordination between high-quality industrial development and high-level regulation, and the leadership in international cooperation and regulatory harmonization. In this way, a unique path for the development of modern TCM regulation with Chinese characteristics will be pioneered.
Humans ; China ; Drugs, Chinese Herbal/standards* ; History, 20th Century ; History, 21st Century ; Medicine, Chinese Traditional/trends*

OBJECTIVE: To explore clinical effects of bone setting manipulation combined with pry reduction and Kirschner needle internal fixation in treating SandersⅡ-Ⅲ calcaneal fracture. METHODS: Clinical data of 52 patients with types Sanders Ⅱand Ⅲ calcaneal fracture (foot) treated with bone-setting manipulation combined with pry reduction and Kirscher needle internal fixation from July 2017 to July 2019 were retrospectively analyzed, including 43 males and 9 females, aged from 31 to 72 years old with an average of (50.83±10.48) years old; 15 patients with Sanders typeⅡ and 37 patients with Sanders type Ⅲ. The changes of Bühler angle, Gissane angle, calcaneus width and calcaneus height before operation and 24 months after operation were compared, and Maryland foot function score was performed to evaluate clinical effects. RESULTS: All patients were followed up from 24 to 60 months with an average of (41.50±9.86)months. The fracture healed normally and the healing time was (11.00±0.95) weeks. Bühler angle, Gissane angle, calcaneal bone width and calcaneal bone height were increased from (16.37±8.36)°, (96.27±9.62)°, (46.82±4.67) mm, (38.41±3.58) mm before operation to (31.48±8.24)°, (111.62±8.69)°, (42.06±4.83) mm, (44.21±3.82) mm at 24 months after operation, and the difference were statistically significant (P<0.01). Postoperative Maryland score at 24 months was (93.04±8.83), 40 patients got excellent result, 7 good and 5 fair. CONCLUSION Orthopedic manipulation combined with percutaneous reduction and Kirschner wire internal fixation could significantly improve Bühler angle, Gissane angle, width, and height of Sanders typeⅡ and Ⅲ calcaneal fractures, and the curative effect is satisfactory.
Humans ; Male ; Female ; Calcaneus/surgery* ; Middle Aged ; Fracture Fixation, Internal/methods* ; Adult ; Aged ; Fractures, Bone/therapy* ; Retrospective Studies ; Bone Wires ; Manipulation, Orthopedic/methods*

OBJECTIVE: To investigate the early clinical efficacy of single-position O-arm navigation-assisted oblique lateral interbody fusion(OLIF) combined with minimally invasive percutaneous pedicle screw fixation(PPS) in the treatment of lumbar spondylolisthesis. METHODS: A retrospective analysis was conducted on 22 patients with lumbar spondylolisthesis who underwent OLIF-PPS surgery including 11 males and 11 females with a mean age of (64.6±1.5) years old ranging from 49 to 80 years old between April 2021 and June 2023. All patients presented with lumbosacral pain, lower limb radiating pain, numbness, and had poor responses to conservative treatment. Surgical time, intraoperative blood loss, hospital stay, and postoperative complications were recorded. Clinical outcomes were evaluated using the visual analogue scale(VAS) and Oswestry disability index(ODI) preoperatively at 3 days after operation and the final follow-up. Standing lumbar anteroposterior and lateral X-rays were performed to measure disc height(DH), slippage degree, vertebral reduction rate, pedicle screw accuracy, and cage subsidence. RESULTS: All surgeries were successfully completed with a mean follow-up of (27.1±2.2) months (range 18 to 36 months). The mean surgical time was (76.1±12.2) min (range 60 to 93 min), intraoperative blood loss was (86.3±32.2) ml (range 40 to 113 ml), and hospital stay was (7.1±1.2) days. Postoperative VAS significantly improved from (7.2±0.7) preoperatively to (2.3±0.5) at 3 days after operation and (1.7±0.2) at the final follow-up (P<0.05). ODI decreased from (68.5±7.2)% preoperatively to (30.3±3.1)% at 3 days after operation and (16.6±1.6)% at the final follow-up (P<0.05). DH increased from (8.5±1.7) mm preoperatively to (18.1±1.4) mm at 3 days after operation and (17.2±1.1) mm at the final follow-up (P<0.05). Slippage degree improved from (24.1±4.6)% preoperatively to (10.3±4.2)% at 3 days after operation and (10.1±3.2)% at the final follow-up (P<0.05). A total of 88 pedicle screws were implanted with an excellent rate of 98% (86/88). Complications included transient left hip flexion weakness (2 cases) and left anteromedial thigh pain (1 case), all resolved during follow-up. No incision hematoma, infection, screw loosening, or cage subsidence occurred. CONCLUSION Single-position O-arm navigation-assisted OLIF combined with PPS demonstrates satisfactory early clinical efficacy for lumbar spondylolisthesis, with advantages including minimal invasiveness, significant pain relief, effective vertebral reduction, and low complication rates.
Humans ; Male ; Female ; Spondylolisthesis/diagnostic imaging* ; Middle Aged ; Aged ; Spinal Fusion/methods* ; Lumbar Vertebrae/diagnostic imaging* ; Minimally Invasive Surgical Procedures/methods* ; Pedicle Screws ; Aged, 80 and over ; Retrospective Studies

Steroid-induced osteonecrosis of the femoral head (SONFH) is avascular necrosis of the femoral head caused by long-erm use of corticosteroids, and its pathogenesis is complex and affected by changes in the dynamic balance of the bone microenvironment. With the deepening of research, the role of bone microenvironment in the pathogenesis of SONFH has been gradually revealed. In the case of excessive use of glucocorticoids (GCs), the bone microenvironment changes significantly, causing imbalance in bone lipid metabolism, microcirculation disorders and disorders of immune regulation, which promotes the increase of the number and activity of osteoclasts, and interferes with the differentiation of osteoblasts and adipoblasts. Through the regulation of PI3K/AKT, OPG/RANKL/RANK, MAPK, JAK/STAT, Hedgehog and other signaling pathways, it eventually leads to osteocyte apoptosis, bone microvascular rupture and destruction of trabecular bone structure, which in turn leads to osteonecrosis, bone density reduction and bone microstructure destruction due to bone microcirculation ischemia, and finally leads to necrosis of the femoral head. This article reviews the role of bone microenvironment homeostasis in GCs-induced ONFH and the regulatory mechanism of bone microenvironment, which is helpful to reveal the pathogenesis of SONFH and provide a theoretical basis for exploring effective intervention strategies.
Humans ; Femur Head Necrosis/physiopathology* ; Animals ; Signal Transduction ; Bone and Bones/metabolism* ; Glucocorticoids/adverse effects* ; Cellular Microenvironment

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome