1.Salidroside exerts cytoprotective effects on bone endothelial progenitor cells via the AMPK pathway in atherosclerotic mouse model
Fang JIA ; Mengfei WANG ; Sifan FEI ; Jiayi XU ; Tianhong YU ; Lin ZHU ; Min ZHOU
Acta Universitatis Medicinalis Anhui 2026;61(4):653-661
ObjectiveTo investigate the effects of salidroside (SAL) on the impaired bioactivity of endothelial progenitor cells (EPCs) in atherosclerotic (As) mice and the potential mechanisms regarding AMP-activated protein kinase (AMPK). MethodsAtherosclerosis was induced in 8-week-old male ApoE-/- mice with high-fat diet. Intragastric administration of SAL was given to one mice group to investigate the effects of SAL on aortic plaque burden, plasma NO level, the migration and angiogenic capabilities of bone marrow-derived EPCs (BM-EPCs). The proliferation, migration and vasculogenic properties of EPCs isolated from As mice were investigated in vitro. AMPK-sh-RNA or the AMPK inhibitor Compound C was used to investigate the role of AMPK/Akt/eNOS pathway in the regulatory effects of SAL. ResultsCompared with As group, NO level was significantly elevated in SAL group. The sizes of atherosclerotic plaques at the aortic root were reduced with smaller lipid cores in SAL group compared with As group. Moreover, the migration and angiogenesis capacity of EPCs markedly decreased in As mice, while SAL treatment reversed these impairments. Incubation with SAL at concentrations of 20, 40, and 80 μmol/L for 48 hours significantly promoted the proliferation, migration, and angiogenesis of EPCs. AMPK-sh-RNA transfection abrogated the 20 μmol/L SAL improvement in EPC biological activities. Western blot analysis further demonstrated that treatment with Compound C blocked the activation of AMPK/Akt/eNOS signaling pathway induced by SAL. ConclusionSAL upregulates the biological functions of EPCs through activating the AMPK/Akt/eNOS signaling pathway, thereby ameliorating EPC dysfunction during the pathological progression of atherosclerosis.
2.Advances of Metal-Organic Framework Stationary Phases for Gas Chromatographic Separations
Yan JIN ; Wen-Bo LI ; Yu-Chen ZHU ; Bin ZHAO ; Lei LI ; Dan ZHENG ; Fei FENG
Chinese Journal of Analytical Chemistry 2025;53(1):1-13
Metal-organic frameworks(MOFs)are porous materials composed of metal ions or metal clusters and organic ligands by coordination,which have the advantages of large specific surface area,good thermal stability and adjustable pore size,and have a promising application in gas chromatographic separation.In recent years,MOFs materials have been used as stationary phases for gas chromatography mainly including ZIF,MIL,UiO-66,HKUST-1,IRMOFs,etc.Based on the molecular sieve effect,van der Waals forces,hydrogen bonding and π-π interactions,the pore size,pore microenvironment,unsaturated metal site and special functional group of the MOFs stationary phase materials can be specifically designed and regulated.MOFs materials as stationary phases have unique separation performance for n-alkanes and their isomers,aromatic compounds and their isomers,alcohols/ketones/aldehydes and their isomers,and chiral compounds.The combination of organic polymers and novel nanomaterials with MOFs materials can improve the separation performance and stability of MOFs.Therefore,MOFs materials are expected to be the promising stationary phase that can be applied to gas separation in complex environments.In this article,the research advances of various stationary phases based on MOFs for gas chromatography in recent years were reviewed.The separation performance and separation mechanism of MOFs stationary phases for mixed gas samples were discussed,and the development trends in the future were prospected.
3.A Pneumatic Micro-valve with Sandwich Structure Based on Micro-electro-mechanical System
Shao-Jie MA ; Wen-Bo LI ; Yu-Chen ZHU ; Zhi-Rui LI ; Bin ZHAO ; Fei FENG
Chinese Journal of Analytical Chemistry 2025;53(5):758-764
In this study,an ON/OFF type micro-valve with a sandwich(glass-silicon-glass)structure was designed and fabricated based on the micro-electro-mechanical system(MEMS)technique.The deformable membrane of this micro-valve was prepared on the silicon on insulator(SOI)substrate and sealed using Si-Si bonding and anodic bonding methods.The micro-valve had high-temperature stability and was suitable for integration with other gas chromatography components.The deformable membrane with a thickness of 10 μm was processed on the top silicon of the SOI substrate.The flow control of the micro-valve could be achieved by changing the driving pressure applied to the deformable membrane to deform it.Compared with polymer membranes,the deformable membrane prepared on the top layer silicon of SOI had better temperature stability and could be released using the deep reactive ion etching technique after silicon-silicon bonding,avoiding deformation during the preparation process.In addition,due to the small gap between the membrane and the inlet/outlet holes,the dead volume of the microvalve was very small.The test results indicated that the micro-valve achieved flow control and ON/OFF functions with good repeatability.
4.A Monolithic Integrated Gas Chromatography Chip with Gas Chromatographic Column and Helium Discharge Ionization Detector
Yu-Chen ZHU ; Shao-Jie MA ; Wen-Bo LI ; Zhi-Rui LI ; Bin ZHAO ; Fei FENG
Chinese Journal of Analytical Chemistry 2025;53(7):1064-1071
A monolithic integrated gas chromatography chip,consisting of a micro gas chromatography column(μGCC)and a micro helium discharge ionization detector(μHDID)was proposed.The chip was fabricated using micro electromechanical system(MEMS)technique,and its sensitivity was improved from two aspects.On one hand,open tubular column was selected as the separation device,and the auxiliary helium channel width of μHDID was modulated based on the microchannel width of the μGCC to match the flow rates of μHDID and μGCC.On the other hand,the electrode structure inside the μHDID collection zone was optimized,a bias electrode group around the collection electrode was constructed,and the ion collection efficiency was improved.After coating HKUST-1 as the stationary phase,the monolithic integrated gas chromatography chip could achieve baseline separation and detection of light hydrocarbon gas mixture(methane,ethane,propane,andn-butane),with a detection limit for propane as low as 25 pg.The chip could carried out test under temperature-programmed conditions,with a resolution of 9.24 for ethane and propane.
5.Determination of Decabromodiphenyl Ether and Decabromodiphenyl Ethane in Sediments by High-Performance Liquid Chromatography Coupled with Inductively Coupled Plasma-Mass Spectrometry
Xiao-Fei WEI ; Jing WU ; Zhuo HAN ; Yu-Zhu ZHANG ; Zi-Juan PENG ; Peng-Hui LI ; Shan-Jun SONG
Chinese Journal of Analytical Chemistry 2025;53(9):1526-1535
Decabromodiphenyl ether(BDE-209)and decabromodiphenyl ethane(DBDPE)are widely used brominated flame retardants,which have been detected in the atmosphere,water,soil,and various organisms.In this study,a method based on high-performance liquid chromatography-inductively coupled plasma-mass spectrometry(HPLC-ICP-MS)was developed for determination of BDE-209 and DBDPE in sediment.Firstly,the target compounds in the sediments were extracted by accelerated solvent extraction(ASE),and the extraction solvent was hexane/dichloromethane(1∶1,V/V).The extract was concentrated by rotary evaporation and purified by a composite silica gel column(6 g neutral silica gel,8 g acidic silica gel,and 4 g anhydrous sodium sulfate),concentrated by nitrogen blowing,and then re-dissolved with 1 mL of toluene for instrumental determination.The chromatographic separation was carried out on a TC-C18(2)column(250 mm×4.6 mm)with isocratic elution using methanol-isopropanol-water(89∶6∶5,V/V)as the mobile phase,and the samples were separated within 20 min.Further,the Br element was quantified by ICP-MS to realize the detection of the target.The results showed that the method established in this study exhibited good linearity(R2>0.999)in the range of 100-10000 ng/mL,and the limits of quantification(LOQs)of the method were 2.0 ng/g for BDE-209 and 10.0 ng/g for DBDPE,with the relative standard deviations(RSDs,n=3)lower than 10%,and the recoveries were in the acceptable range(80.9%-120.7%).The matrix effect was effectively controlled within 10%.In addition,by analyzing the actual sediment samples from Guangxi,a background point,and Taizhou,Zhejiang,a typical contaminated area,it was found that neither BDE-209 nor DBDPE was detected in the sediment from Guangxi,while the concentrations of BDE-209 and DBDPE in the sediment from Zhejiang ranged from 1591.8 to 3362.9 ng/g,which further demonstrated the applicability and reliability of the method for analyzing actual environmental samples.This study provided a strong technical support for the accurate detection of POPs in the environment.
6.A Micro Gas Chromatographic Column with Large Surface Area Based on Anodization
Shao-Jie MA ; Wen-Bo LI ; Yu-Chen ZHU ; Bo-Xin CHEN ; Zhi-Rui LI ; Bin ZHAO ; Fei FENG
Chinese Journal of Analytical Chemistry 2025;53(10):1607-1614
A micro gas chromatographic column with mesoporous surface micro column array prepared by anodization method was proposed.A porous support layer with a characteristic pore size of about 30 nm inside the chromatographic column was prepared in situ using anodization method,and a uniform alumina stationary phase was deposited on the mesoporous support layer using atom layer deposition(ALD)technique.The existence of a mesoporous support layer increased surface area of the chromatographic column,thereby increasing the total amount of stationary phase loading and enhancing column capacity,which facilitated chromatographic separation.The test results showed that the porous support layer significantly reduced the longitudinal molecular diffusion and mass transfer resistance of the micro gas chromatographic column,and significantly increased the number of theoretical plates(n-nonane increased by 290.2%).Furthermore,column efficiency of the chromatographic column was less affected by flow rate,which was conducive to rapid separation of heavy hydrocarbon mixtures.
7.Analysis of reoperation causes in unilateral biportal endoscopy for treating lumbar degenerative diseases
Yuquan LIU ; Guangpeng LI ; Xiang LI ; Bin ZHU ; Weiyang ZUO ; Haining TAN ; Ning LIU ; Qi FEI ; Haibo SUN ; Tianqi FAN ; Yong YANG ; Lingjia YU
International Journal of Surgery 2025;52(2):108-113
Objective:To analyze the reoperation rate and causes during the early adoption phase of unilateral biportal endoscopy (UBE).Methods:The clinical data of 180 patients who underwent UBE performed by a single surgeon at Beijing Friendship Hospital, Capital Medical University from October 2021 to June 2023 were retrospectively analyzed. Clinical and imaging data of patients who underwent reoperation were collected to analyze the causes of reoperation, and the clinical efficacy of the reoperations was also followed up. Measurement data were expressed as mean ± standard deviation ( ± s), and t-test was used before and after treatment. Results:A total of 180 patients who underwent UBE were included in this study, of which 6 patients underwent reoperation, and the reoperation rate was 3.33%. Among them, 3 cases occurred in the first 90 surgeries and the other 3 occurred in the subsequent 90 surgeries. The causes of reoperation were as follows: recurrent lumbar disc herniation at the same segment postoperatively in 2 cases, insufficient decompression in 2 cases, disc herniation following isolated decompression in 1 case, and immediate postoperative perianal numbness in 1 case. The time between the initial surgery and reoperation ranged from 0 to 187 days, with an average of 63.3 days. The average follow-up time after reoperation was 18.3 months. The visual analogue scale (VAS) and Oswestry disability index (ODI) scores of the patients at the last follow-up were significantly improved compared with those before operation (VAS score of low back pain: 5.2 ± 1.7 before operation, 1.2 ± 0.8 at the last follow-up, P<0.001; VAS score of leg pain: 7.2 ± 1.5 before operation, 1.2 ± 1.2 at the last follow-up, P<0.001; ODI score: 67.3 ± 5.7 before operation, 20.2 ± 8.2 at the last follow-up, P<0.001). The postoperative modified MacNab scores were generally satisfactory (4 cases were rated as excellent, accounting for 66.7%; 2 cases were rated as good, accounting for 33.3%). Except for one patient who experienced dural injury during open revision surgery, there were no serious complications such as nerve damage. Conclusions:In the early stages of UBE surgery, recurrent lumbar disc herniation and inadequate decompression are the primary reasons for reoperation, typically occurring within the first three months postoperatively. Reoperation does not significantly increase the risk of nerve injury. Enhanced early postoperative follow-up is recommended. For symptomatic patients, a second surgery with thorough decompression can yield satisfactory treatment outcomes.
8.Study on secondary metabolites of Penicillium expansum GY618 and their tyrosinase inhibitory activities
Fei-yu YIN ; Sheng LIANG ; Qian-heng ZHU ; Feng-hua YUAN ; Hao HUANG ; Hui-ling WEN
Acta Pharmaceutica Sinica 2025;60(2):427-433
Twelve compounds were isolated from the rice fermentation extracts of
9.Perturbation response scanning of drug-target networks: Drug repurposing for multiple sclerosis.
Yitan LU ; Ziyun ZHOU ; Qi LI ; Bin YANG ; Xing XU ; Yu ZHU ; Mengjun XIE ; Yuwan QI ; Fei XIAO ; Wenying YAN ; Zhongjie LIANG ; Qifei CONG ; Guang HU
Journal of Pharmaceutical Analysis 2025;15(6):101295-101295
Combined with elastic network model (ENM), the perturbation response scanning (PRS) has emerged as a robust technique for pinpointing allosteric interactions within proteins. Here, we proposed the PRS analysis of drug-target networks (DTNs), which could provide a promising avenue in network medicine. We demonstrated the utility of the method by introducing a deep learning and network perturbation-based framework, for drug repurposing of multiple sclerosis (MS). First, the MS comorbidity network was constructed by performing a random walk with restart algorithm based on shared genes between MS and other diseases as seed nodes. Then, based on topological analysis and functional annotation, the neurotransmission module was identified as the "therapeutic module" of MS. Further, perturbation scores of drugs on the module were calculated by constructing the DTN and introducing the PRS analysis, giving a list of repurposable drugs for MS. Mechanism of action analysis both at pathway and structural levels screened dihydroergocristine as a candidate drug of MS by targeting a serotonin receptor of serotonin 2B receptor (HTR2B). Finally, we established a cuprizone-induced chronic mouse model to evaluate the alteration of HTR2B in mouse brain regions and observed that HTR2B was significantly reduced in the cuprizone-induced mouse cortex. These findings proved that the network perturbation modeling is a promising avenue for drug repurposing of MS. As a useful systematic method, our approach can also be used to discover the new molecular mechanism and provide effective candidate drugs for other complex diseases.
10.Increased Tertiary Lymphoid Structures are Associated with Exaggerated Lung Tissue Damage in Smokers with Pulmonary Tuberculosis.
Yue ZHANG ; Liang LI ; Zi Kang SHENG ; Ya Fei RAO ; Xiang ZHU ; Yu PANG ; Meng Qiu GAO ; Xiao Yan GAI ; Yong Chang SUN
Biomedical and Environmental Sciences 2025;38(7):810-818
OBJECTIVE:
Cigarette smoking exacerbates the progression of pulmonary tuberculosis (TB). The role of tertiary lymphoid structures (TLS) in chronic lung diseases has gained attention; however, it remains unclear whether smoking-exacerbated lung damage in TB is associated with TLS. This study aimed to analyze the characteristics of pulmonary TLS in smokers with TB and to explore the possible role of TLS in smoking-related lung injury in TB.
METHODS:
Lung tissues from 36 male patients (18 smokers and 18 non-smokers) who underwent surgical resection for pulmonary TB were included in this study. Pathological and immunohistological analyses were conducted to evaluate the quantity of TLS, and chest computed tomography (CT) was used to assess the severity of lung lesions. The correlation between the TLS quantity and TB lesion severity scores was analyzed. The immune cells and chemokines involved in TLS formation were also evaluated and compared between smokers and non-smokers.
RESULTS:
Smoker patients with TB had significantly higher TLS than non-smokers ( P < 0.001). The TLS quantity in both the lung parenchyma and peribronchial regions correlated with TB lesion severity on chest CT (parenchyma: r = 0.5767; peribronchial: r = 0.7373; both P < 0.001). Immunohistochemical analysis showed increased B cells, T cells, and C-X-C motif chemokine ligand 13 (CXCL13) expression in smoker patients with TB ( P < 0.001).
CONCLUSION
Smoker TB patients exhibited increased pulmonary TLS, which was associated with exacerbated lung lesions on chest CT, suggesting that cigarette smoking may exacerbate lung damage by promoting TLS formation.
Humans
;
Male
;
Tuberculosis, Pulmonary/immunology*
;
Middle Aged
;
Tertiary Lymphoid Structures/pathology*
;
Adult
;
Lung/pathology*
;
Smoking/adverse effects*
;
Smokers
;
Aged
;
Tomography, X-Ray Computed

Result Analysis
Print
Save
E-mail