OBJECTIVE: To explore the genetic etiology of 46 Chinese pedigrees affected with Hereditary multiple exostoses (HME) and provide genetic counseling and reproductive intervention. METHODS: Whole-exome sequencing and Sanger sequencing were carried out on 87 patients from the 46 pedigrees to analyze the variants of EXT1 and EXT2 genes. Pathogenicity of the variants was assessed based on the guidelines from the American College of Medical Genetics and Genomics and Association for Molecular Pathology (ACMG/AMP). Prenatal diagnosis and preimplantation genetic testing (PGT) were provided for couples with identified pathogenic mutations. This study was approved by the Medical Ethics Committee of the hospital (Ethics No.: LL-SC-SG-2014-010). RESULTS: In total 17 and 22 pathogenic variants were respectively identified in the EXT1 and EXT2 genes, among which 5 EXT1 and 12 EXT2 variants were unreported previously. Three patients with no family history were found to harbor de novo variants of the EXT1 gene. Twenty nine couples had opted for PGT or underwent prenatal diagnosis following natural conception, and 17 healthy babies were born. CONCLUSION This study has clarified the genetic etiology of 45 HME pedigrees and identified 17 novel variants, which has enriched the mutational spectrum of the EXT1 and EXT2 genes. Reproductive intervention through PGT and prenatal diagnosis have prevented the recurrence of HME in these families.
Humans ; Female ; Male ; Pedigree ; Exostoses, Multiple Hereditary/diagnosis* ; N-Acetylglucosaminyltransferases/genetics* ; Adult ; Exostosin 1 ; Asian People/genetics* ; Genetic Testing ; Exostosin 2 ; Mutation ; China ; Prenatal Diagnosis ; Pregnancy ; Genetic Counseling ; Preimplantation Diagnosis ; Exome Sequencing ; East Asian People

Chronic heart failure （CHF） refers to a clinical syndrome in which the function or structure of the heart is changed due to damage to the original myocardium， resulting in reduced pumping and/or filling functions of the heart. In recent years， the mechanisms， pathways， and targets of traditional Chinese medicine （TCM） in the treatment of CHF have been continuously confirmed， and the application of TCM theories in guiding the syndrome differentiation and precise treatment of CHF is currently a research hotspot. On the basis of the syndrome differentiation and treatment in TCM， Professor LI Candong innovatively proposed the thinking of five differentiation： Disease differentiation， syndrome differentiation， pathogenesis differentiation， symptom differentiation， and individual differentiation. This article explores the clinical diagnosis and treatment of CHF from this thinking， emphasizing comprehensive syndrome differentiation， objective analysis， dynamic assessment， and individualized treatment. In terms of diagnosis， the first is to identify the disease name， cause， location， severity， and type of CHF， determine the type and its evolution， and clarify the process of transmission and transformation between deficiency and excess. Secondly， it is necessary to distinguish the authenticity， severity， primary and secondary， urgency and complexity of CHF syndromes， providing scientific guidance for syndrome differentiation and treatment. Thirdly， according to the symptoms and the principles of deficiency and excess， the physician should identify the core pathogenesis of CHF from the perspectives of Qi， blood， Yin， Yang， deficiency， stasis， phlegm， water， and toxins. Fourthly， from the macro， meso and micro levels， the physician should carefully distinguish the presence or absence， severity， authenticity， and completeness of the symptoms to guide the diagnosis and treatment process of CHF. Finally， personalized medication for CHF should be promoted based on the patient's gender， age， constitution， and living habits. In terms of treatment， based on the thinking of five differentiation， we propose that the treatment of CHF should integrate the disease and syndrome， clarify the pathogenesis， and apply precise treatment. The treatment should be people-oriented， staged， and typed， and the medication should be adjusted according to symptoms. This diagnostic and therapeutic approach is based on the holistic concept and syndrome differentiation and treatment， and combines the three causes for appropriate treatment， providing new ideas and insights for the diagnosis and treatment of CHF.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

The chemical components of Carthami Flos were investigated by using macroporous resin, silica gel column chromatography, reversed-phase octadecylsilane(ODS) column chromatography, Sephadex LH-20, and semi-preparative high-performance liquid chromatography(HPLC). The planar structures of the compounds were established based on their physicochemical properties and ultraviolet-visible(UV-Vis), infrared(IR), high-resolution electrospray ionization mass spectrometry(HR-ESI-MS), and nuclear magnetic resonance(NMR) spectroscopic technology. The absolute configurations were determined by comparing the calculated and experimental electronic circular dichroism(ECD). Six flavonoid C-glycosides were isolated from the 30% ethanol elution fraction of macroporous resin obtained from the 95% ethanol extract of Carthami Flos, and identified as saffloquinoside F(1), 5-hydroxysaffloneoside(2), iso-5-hydroxysaffloneoside(3), isosafflomin C(4), safflomin C(5), and vicenin 2(6). Among these, the compounds 1 to 3 were new chalcone C-glycosides. The compounds 1, 2, 4, and 5 could significantly increase the viability of H9c2 cardiomyocytes damaged by oxygen-glucose deprivation/reoxygenation(OGD/R) at a concentration of 50 μmol·L~(-1), showing their good cardioprotective activity.
Glycosides/pharmacology* ; Flowers/chemistry* ; Drugs, Chinese Herbal/pharmacology* ; Carthamus tinctorius/chemistry* ; Chalcones/pharmacology* ; Animals

Melicope pteleifolia is a plant belonging to the Melicope genus of the Rutaceae family. Known for a bitter taste and cold nature, its stems and tender branches with leaves possess properties of clearing heat, detoxifying, dispelling wind, and removing dampness and can be used to treat sore throat, malaria, jaundice hepatitis, rheumatic bone pain, eczema, dermatitis, and sores and ulcers. In this study, 19 compounds were isolated from the chloroform and n-butanol extracts of M. pteleifolia leaves by using liquid chromatography-mass spectrometry(LC-MS) and proton nuclear magnetic resonance(~1H-NMR)-guided separation techniques. The compounds were identified as isoleptonol(1), leptaones B-E(2-5), friedelin(6), evodionol(7), ethyl p-hydroxybenzoate(8), litseachromolaevane A(9), quercetin-7,3',4'-trimethyl ether(10), kokusaginin(11), 8-(1-hydroxyethyl)-5,6,7-trimethoxy-2,2-dimethyl-2H-1-benzopyran(12), ethyl p-hydroxycinnamate(13), 3-hydroxy-9-methyl-6H-benzo\[c\]chromen-6-one(14), agrimonolide(15), 7-hydroxycoumarin(16), scopoletin(17), isoscutellarein(18), and agrimonolide 6-O-glucoside(19). Among these, the new compounds included one chromene and four meroterpenoid(1-5). The anti-inflammatory activities of the newly identified compounds 1-5 were screened in vitro, showing that the five compounds(1-5) exhibited inhibitory effects on nitric oxide(NO) production in BV2 cells induced by lipopolysaccharide(LPS)/interferon(IFN)-γ, with IC_(50) values ranging from 12.25 to 36.48 μmol·L~(-1).
Anti-Inflammatory Agents/isolation & purification* ; Mice ; Animals ; Rutaceae/chemistry* ; Drugs, Chinese Herbal/isolation & purification* ; Macrophages/immunology* ; Nitric Oxide/immunology*

Background/Aims: The purpose of this study was to develop a diagnostic model utilizing multimodal ultrasound parameters to aid in the detection of cervical lymph node metastasis in papillary thyroid cancer (PTC) patients. Methods: The study included 84 suspicious lymph nodes from 69 PTC patients, all of whom underwent fine needle aspiration with pathological results. Data from conventional grayscale ultrasound, shear wave elastography (SWE), and superb microvascular imaging were analyzed. Key ultrasound features were compared between benign and metastatic groups to create a diagnostic model using Fisher’s stepwise discriminant analysis. The model’s effectiveness was assessed with self-testing, cross-validation, and receiver operating characteristic curve analysis. Results: Four features, namely lymphatic hilum (X1), cortical hyperechogenicity (X2), vascular pattern (X4), and SWEmean (X7), were integral to the discriminant analysis, resulting in the equation: Y1 = -3.461 + 2.423X1 + 0.321X2 + 1.620X4 + 0.109X7, Y2 = -8.053 + 0.414X1 + 2.600X2 + 2.504X4 + 0.192X7. If Y1 < Y2, the LN would be diagnosed as metastatic lymph nodes. The model demonstrated an area under the curve of 0.833, with a sensitivity of 83.33% and specificity of 83.33%. Conclusions The multimodal ultrasound diagnostic model, established through Fisher’s stepwise discriminant analysis, proved effective in identifying metastatic lymph nodes in PTC patients.

OBJECTIVE: To compare the effects of piriformis muscle release versus preservation in total hip arthroplasty (THA) via supercapsular percutaneously-assisted total hip (SuperPATH) approach on muscle injury. METHODS: Forty-nine patients undergoing initial THA via SuperPATH approach between June 2022 and June 2023 were randomly divided into two groups, with 24 patients in trial group and 25 patients in control group. The trial group received piriformis muscle release intraoperatively, whereas the control group underwent muscle preservation. There was no significant difference in baseline data such as gender, age, body mass index, disease type, American Society of Anesthesiologists (ASA) grading, and preoperative muscle infiltration, muscle atrophy, muscle injury serological indicators, Harris score, etc. ( P>0.05). The incision length, operation time, intraoperative blood loss, total blood loss, hospital stay, preoperative and postoperative 1-day muscle injury serological indicators [including creatine kinase (CK) and lactic dehydrogenase (LDH)], and incidence of complications between two groups were recorded. Harris score was used to evaluate the recovery of hip joint function. MRI was used to evaluate the extent of hip muscle injuries (gluteus minimus, gluteus medius, piriformis, obturator internus, quadratus femoris), including tendon integrity, degree of muscle fat infiltration, and degree of muscle atrophy preoperative and 1 year postoperatively. RESULTS: The operation time, intraoperative blood loss, and total blood loss in the trial group were significantly shorter than those in the control group ( P<0.05). There was no significant difference in the incision length and length of hospital stay between the two groups ( P>0.05). Both groups showed a significant increase in serum CK and LDH levels on postoperative day 1 compared to preoperative levels ( P<0.05), but there was no significant difference between the two groups ( P>0.05). All patients were followed up, the follow-up time for the trial group and the control group was (14.8±2.8) and (15.1±3.0) months, respectively, with no significant difference ( t=-0.400, P=0.691). Incisions healed by first intention in both groups, with 1 case in the trial group and 2 cases in the control group experiencing venous thrombosis in the calf muscle space. There was no complication such as deep vein thrombosis, pulmonary embolism, hip dislocation, prosthesis loosening, or periprosthetic infection in the lower limbs. There was no significant difference in the incidence of complications between the two groups ( P>0.05). At 1 year after operation, both groups of patients showed a significant increase in Harris scores compared to preoperative levels ( P<0.05), but there was no significant difference between the two groups ( P>0.05). Compared with preoperative results, both groups showed significant fat infiltration in the piriformis and obturator muscles at 1 year after operation ( P<0.05), while there was no significant fat infiltration in the gluteus minimus, gluteus medius, and quadratus femoris muscles ( P>0.05). At 1 year after operation, except for the higher incidence of piriformis muscle fat infiltration in the control group compared to the trial group ( P<0.05), there was no significant difference in the incidence of other muscle infiltrations between the two groups ( P>0.05). At 1 year after operation, both groups of piriformis and obturator muscles showed significant muscle atrophy compared to preoperative levels ( P<0.05). The gluteus minimus and gluteus medius showed mild atrophy compared to preoperative levels, while the maximum transverse diameter of the quadriceps muscle slightly increased, but the differences were not significant ( P>0.05). There was no significant difference in the maximum cross-sectional diameter or cross-sectional area changes of each muscle between the two groups ( P>0.05). At 1 year after operation, the continuity of the gluteus medius and quadratus femoris muscles in both groups was intact. Both groups had some patients with incomplete continuity of the piriformis muscle, obturator internus, and gluteus minimus, but the difference was not significant ( P>0.05). CONCLUSION The SuperPATH approach THA may cause injury to the piriformis, gluteus minimus, and obturator internus. The piriformis muscle release does not increase muscle injury, but it can shorten the operation time and reduce bleeding.
Humans ; Arthroplasty, Replacement, Hip/adverse effects* ; Male ; Female ; Muscle, Skeletal/surgery* ; Middle Aged ; Aged ; Postoperative Complications/epidemiology* ; Adult ; Operative Time ; Muscular Atrophy ; Creatine Kinase/blood* ; Length of Stay ; Treatment Outcome

OBJECTIVE: To investigate the effects of bone density, plate bending degree and proximal screw type on the stress fracture of clavicle hook. METHODS: Three sows weighing between 45 and 50 kg were selected, from which a total of 40 rivs were collected. The 15 ribs of sows were divided into 3 groups according to bone density and bone hardness with 5 rivs in each group. And then the 3 groups were fixed with 6-hole collarbone hook plates and 3 locking screws. Measure the maximum torsion force when the ribs were fractured by force. The same size 15 rids were divided into 3 groups, named forward bending group, 0° group(the angle between the plate surface and the rib surface) and reverse bending group. All fixed with 6-hole collarbone hook plates and locking screws to measure the maximum torsion force of rib stress fracture. Then the same size 10 rids were divided into 2 groups, the normal screw group and the locking screw group with 5 ribs in each group. Both groups were fixed with 6-hole collarbone hook plates and screws. The normal screw group was a normal screw, fixed in proximal end, and two locking screws. The locking screw group was fixed by locking screws. Measure the maximum torsion force of the two groups when the ribs fracture by force. RESULTS: In the bone density experiment, the torque force of hard bone group (104.51±6.27) N was greater than the normal bone group (75.04±3.81) N(t=8.979, P<0.05). The force of normal bone group was greater than the osteoporosis group (49.99±2.12) N(t=12.832, P<0.05). In the bending collarbone hook experiment, the order of the torque force generated by each group as follow:the forward bending group (343.59±6.18) N greater than the 0° group (106.01±5.29) N(t=65.279, P<0.05) greater than the reverse bending group (95.82±4.12) N(t=3.398, P<0.05). The force of the normal screw group (98.68±0.70) N was greater than the locking screw group (50.20±0.95) N(t=91.484, P<0.05). The data comparisons of each group were statistically significant. CONCLUSION Bone density, plate bending degree and proximal screw type had an impact on stress fracture of clavicle hook plate. Higher bone density, forward bending of the steel plate, and ordinary screws in proximal end can reduce the rates of stress fractures of clavicle hooks.
Animals ; Bone Plates ; Clavicle/surgery* ; Swine ; Fractures, Stress/etiology* ; Female ; Risk Factors ; Fracture Fixation, Internal/instrumentation* ; Bone Screws ; Biomechanical Phenomena ; Bone Density

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome