1.Mosquito monitoring and influence of meteorological factors on mosquito density around Beijing Capital International Airport, 2016-2022
Ran FENG ; Tie-zheng MA ; Si-jie ZHU ; Bo TIAN ; Fei QUAN ; Zhi-lin WU ; Xiao-tao LIU ; Fu-yuan ZHANG ; Song-jian ZHANG
Acta Parasitologica et Medica Entomologica Sinica 2026;33(1):40-48
Objective To understand mosquito density, species composition, and seasonal variations around the Beijing Capital International Airport(BCIA)and provide scientific evidence for mosquito-borne disease prevention and control. Methods Meteorological data were collected from 2016 to 2022, and mosquito density was monitored at seven surveillance sites around the BCIA from May to October each year using CO2-baited mosquito traps to analyze the relationship between mosquito density and meteorological factors. Results In total,68 518 female mosquitoes were captured, with a mosquito density of 10.20 per light · hour. The dominant species was Culex pipiens pallens(73.90%), followed by Aedes albopictus(9.71%)and Ae. vexans(9.29%);the mosquito density was highest in 2016(14.8 per light·hour)and lowest in 2022(4.46 per light·hour). Significant statistical differences were observed in mosquito density among different species(F=18.118, P<0.05). The density of Cx. pipiens pallens and other mosquito species showed a mutually exclusive trend; the peak of mosquito density varied based on years and habitats, with significant statistical differences in mosquito density among different habitats(F=8.504, P<0.05). The highest mosquito density was observed near the Wenyu River(21.50 per light·hour), whereas the lowest was recorded at the BCIA construction site(2.44 per light· hour). The monthly average temperature(r=0.595), monthly average highest temperature(r=0.575), and monthly average lowest temperature(r=0.624)showed moderate positive correlations, whereas the monthly average air pressure(r=-0.484)showed a moderate negative correlation. The monthly average minimum temperature was included in the regression model(F=25.575, P<0.000), and the equation Y=1.029X4-8.181 was used. The monthly average air pressure 2 months prior(b=-2.418, β=-1.619, P<0.05)and the monthly average relative humidity(b=-0.739, β=-1.201, P<0.05)significantly negatively predicted the mosquito density. Notably, the regression equation used was y=2526.170+(-2.418)X9+(-0.739)X13. The exposure-response analysis revealed that the density of mosquitoes was not linearly related to the average monthly air pressure, rainfall, and duration of sunshine. Conclusions The dominant mosquito species around the BCIA was Cx. pipiens pallens, Ae. albopictus, and Ae. vexans. During the control of Cx. pipiens pallens, the impact on other mosquito species must also be considered. Environmental management, breeding sites, and scientific use of pesticides should be prioritized based on the activity periods of mosquitoes. Further studies on mosquitoes and meteorological factors should be conducted to provide references and novel avenues for mosquito control.
2.Analyses of community chronic disease management efficiency in Shanghai: a case study of hypertension and diabetes
Kun LUO ; Fei WU ; Wei WANG ; Qianwei ZHANG ; Zhaoyu CHANG ; Yuan XU ; Chaowei FU ; Fei YAN ; Minna CHENG
Shanghai Journal of Preventive Medicine 2026;38(5):355-360
ObjectiveTo analyze the output and efficiency of chronic disease management services for hypertension and diabetes in community health service institutions in Shanghai, to evaluate the allocation and efficiency of chronic disease management resources, and to provide references for improving the efficiency of chronic disease management in Shanghai’s communities. MethodsA total of 73 community health institutions from 15 districts of Shanghai were selected. Based on the chronic disease management resource data of community health institutions in 2019, 2021, and 2023, descriptive methods and the BCC model in Data Envelopment Analysis (DEA) were used to analyze the resource allocation, service output, and the efficiency of chronic disease management services in community health institutions in Shanghai. ResultsFrom 2019 to 2023, the indicators of resource allocation and service output of community health service institutions in Shanghai all showed upward trends. In terms of service efficiency, the average number of chronic disease patients managed by each health technician decreased from 237 to 231, and the number of patients served per 1 000 working hours decreased from 54 to 44. DEA efficiency analyses showed that the average overall efficiency increased from 0.867 in 2019 to 0.886 in 2021 and then decreased to 0.811 in 2023. The average technical efficiency decreased from 0.901 to 0.847, which was the main reason for the decline in overall efficiency. The average scale efficiency showed an initial increase followed by a decrease, rising from 0.961 in 2019 to 0.977 in 2021 and dropping back to 0.955 in 2023. The number of strong effective districts (overall efficiency=1.000) decreased from 6 in 2019 to 3 in 2023, and the efficiency differences between districts expanded. The range of overall efficiency widened from 0.622‒1.000 to 0.513‒1.000, indicating a decline in overall efficiency and an increase in inter-district heterogeneity. ConclusionFrom 2019 to 2023, the total volume of resource allocation and service output for chronic disease management in community health service institutions in Shanghai increased continuously. However, both the service output efficiency and the overall resource allocation efficiency declined, driven primarily by a decrease in technical efficiency, and accompanied by widening inter‑district disparities.
3.Source and carcinogenesis risk assessment of PM2.5-bound polycyclic aromatic hydrocarbons in Harbin, China
Zhen KANG ; Yang LIU ; Rao FU ; Xiaobo LIU ; Qianqi HONG ; Fei YAN
Journal of Public Health and Preventive Medicine 2026;37(4):6-10
Objective To analyze the pollution characteristics of PM2.5-bound polycyclic aromatic hydrocarbons (PAHs) during the non-heating period, heating period, and haze period in Harbin, and infer their possible sources, and to evaluate their impact on population carcinogenesis. Methods From 2020 to 2022, sampling points were set up in different districts of Harbin. PM2.5 samples were regularly collected every month to analyze the contents of 10 types of PM2.5-bound 4-6 rings PAHs. The pollution characteristics of PAHs were analyzed during different monitoring periods (non-heating period, heating period, and haze period). The excess carcinogenesis risks of PM2.5-bound PAHs were assessed according to the Technical Specifications for Health Risk Assessment of Ambient Air Pollution and the U. S. Environmental Protection Agency (US EPA) risk assessment method. The characteristic ratio method and the positive matrix factorization (PMF) model were used to infer the sources of PAHs. Results The median mass concentrations of ambient PM2.5-bound 4-6 rings PAHs (ΣPAHs) during the non-heating period, heating period, and haze period were 6.44 ng/m3, 37.85 ng/m3, and 106.79 ng/m3, respectively. During the heating season and haze period, the concentrations of benzo[a]anthracene, benzo[k]fluoranthene, pyrene and fluoranthene were relatively high. The excess carcinogenic risks for ASF>16, ASF2-16 and ASF<2 caused by exposure to PM2.5-bound 4-6rings PAHs during the heating season were 2.34×10-6, 1.82×10-6, and 0.88×10-6, respectively, while the excess carcinogenic risks for the whole population during the heating season and haze period were 5.05×10-6 and 1.75×10-6, respectively. The results of the two source methods showed that the main characteristic elements during the heating season were fluoranthene, pyrene, benzo[a]anthracene, benzo[b]fluoranthene, benzo[k]fluoranthene, and benzo[a]pyrene. According to the emission source standards, it was determined that the sources were mainly coal and biomass combustion, accompanied by traffic source emissions. Conclusion In Harbin, the PM2.5-bound 4-6 rings PAHs during the haze period is significantly higher than that during the heating period. The pollution is mainly from coal combustion emissions, accompanied by continuous traffic source pollution. The exposure to PAHs during the heating period poses a potential carcinogenic risk to the population.
4.Epidemiological characteristics and prevention strategies of gouty arthritis in Northwest China in 2023-2025
Ling FU ; Ning CUI ; Peijie XIA ; Nan ZHAO ; Aiqing PAN ; Xiaomin RAN ; Fei CHEN ; Kaiyue CAO
Journal of Public Health and Preventive Medicine 2026;37(4):56-60
Objective To explore the epidemiological characteristics of gouty arthritis in Northwest China from 2023 to 2025, and to formulate preventive intervention measures. Methods By retrospectively analyzing the case data of medical institutions in Northwest China from January 2023 to June 2025 (a total of 8 139 cases), the incidence trend and population distribution characteristics of gouty arthritis in this area were analyzed. Multivariate logistic regression analysis was performed to identify risk factors. Results From 2023 to 2025, the prevalence rate of gouty arthritis in adult residents in Northwest China was 3.74% (304/8 139). Among the sites affected by gouty arthritis, the metatarsophalangeal joint accounted for the highest proportion (P<0.05). From the perspective of age distribution, the prevalence rate was the highest in 40-59 years old group (5.90%), followed by 66-80 years old group (4.21%) and >80 years old group (2.75%). The incidence rate in 40-65 years old group was higher than that in the other age groups (P<0.05). High blood uric acid and creatinine, alcohol drinking, obesity, high purine diet, concurrent chronic kidney disease and metabolic syndrome were risk factors affecting gouty arthritis in Northwest China (P<0.05). Conclusion High blood uric acid level, high creatinine level, alcohol drinking, obesity, high purine diet, concurrent chronic kidney disease and metabolic syndrome are risk factors influencing gouty arthritis in Northwest China. Based on the above factors, this study proposes comprehensive prevention strategies from the individual, community and public health levels to provide a scientific basis for reducing the incidence rate of gouty arthritis.
5.Effect of action observation therapy based on mirror neuron system combined with low-frequency repetitive transcranial magnetic stimulation on post-stroke unilateral spatial neglect
Fei ZHANG ; Boxun FU ; Hui SHEN ; Jin CHEN
Chinese Journal of Rehabilitation Theory and Practice 2026;32(7):768-775
ObjectiveTo evaluate the effect of action observation therapy (AOT) combined with low-frequency repetitive transcranial magnetic stimulation (rTMS) on post-stroke unilateral spatial neglect. MethodsA total of 108 patients with post-stroke unilateral spatial neglect admitted to Suqian Integrated Traditional Chinese and Western Medicine Hospital from January, 2023 to March, 2024 were enrolled. The patients were randomly allocated to AOT group, rTMS group and combined group with 36 patients in each group. All the groups received conventional treatment. The AOT group additionally received AOT, the rTMS group additionally received rTMS, and the combined group received both AOT and rTMS, for four weeks. Before and after treatment, the patients were assessed using the Montreal Cognitive Assessment (MoCA), Fugl-Meyer Assessment (FMA), modified Barthel Index (MBI), Chinese Behavioural Inattention Test-conventional test (CBIT-C) and CBIT-behavioural test (CBIT-B). The latency and amplitude of the N20 potential on the affected side were also measured. ResultsThree patients dropped out from each group. After intervention, significant main effects of time (F > 77.096, P < 0.001) and group (F > 5.119, P < 0.01) and significant time-by-group interaction effects (F > 3.320, P < 0.05)were observed in the MoCA, FMA, MBI, and CBIT-C scores. For the CBIT-B score, the main effects of time (F = 367.430, P < 0.001) and group (F = 4.995, P = 0.008) were significant. After intervention, MoCA, FMA, MBI, CBIT-C and CBIT-B scores, and N20 amplitude and latency were better in the combined group than in the AOT and rTMS groups (P < 0.05). ConclusionThe combination of AOT and rTMS may further ameliorate cognitive function, motor function, activities of daily living, and the degree of spatial neglect in post-stroke patients with unilateral spatial neglect, potentially attributable to improved nerve conduction function.
6.Comparison on odor components before and after processing of Cervi Cornu Pantotrichum based on electronic nose, HS-GC-MS, and odor activity value.
Xiao-Yu YAO ; Ke SHEN ; Di WU ; Xiao-Fei SUN ; Chun-Qin MAO ; Li FU ; Xiao-Yan WANG ; Hui XIE ; Tu-Lin LU
China Journal of Chinese Materia Medica 2025;50(2):421-431
Processing for deodorization is widely used in the production of animal-derived Chinese medicinal materials. In this study, Heracles Neo ultra-fast gas-phase electronic nose combined with chemometrics was employed to analyze the overall odor difference of Cervi Cornu Pantotrichum(focusing on that derived from Cervus nippon Temminck in this study) before and after processing. The results showed that the electronic nose effectively distinguished between the medicinal materials and decoction pieces of Cervi Cornu Pantotrichum. HS-GC-MS was used to identify and quantify the volatile components in the medicinal materials and decoction pieces of Cervi Cornu Pantotrichum, and 35 and 37 volatile components were detected in the medicinal materials and decoction pieces, respectively. The medicinal materials and decoction pieces contained 28 common volatile components contributing to the odor of Cervi Cornu Pantotrichum. The odor activity value(OAV) of each volatile component was calculated based on the olfactory threshold and relative content. The results showed that there were 17 key odor substances such as isovaleraldehyde, 2-methylbutanal, isobutyraldehyde, hexanal, and methanethiol in the medicinal materials and decoction pieces of Cervi Cornu Pantotrichum. All of them had bad odor and were the main source of the odor of Cervi Cornu Pantotrichum. The results of principal component analysis(PCA) and orthogonal partial least squares-discriminant analysis(OPLS-DA) showed that there were significant differences in volatile components between the medicinal materials and decoction pieces of Cervi Cornu Pantotrichum. Based on the thresholds of P<0.05 and Variable Importance in Projection(VIP)>1, 21 differential volatile odor components were screened out. Among them, isopentanol, isovaleraldehyde, 2-methylbutanal, n-nonanal, and dimethylamine were the key differential odor compounds between the medicinal materials and decoction pieces of Cervi Cornu Pantotrichum. The odor compounds and their relative content reduced, and some flavor substances such as esters were produced after processing with wine, which was the main reason for the reduction of the odor after processing of Cervi Cornu Pantotrichum.
Odorants/analysis*
;
Electronic Nose
;
Gas Chromatography-Mass Spectrometry/methods*
;
Animals
;
Volatile Organic Compounds/analysis*
;
Deer
;
Drugs, Chinese Herbal/chemistry*
7.Phase changes and quantity-quality transfer of raw material, calcined decoction pieces, and standard decoction of Ostreae Concha (Ostrea rivularis).
Hong-Yi ZHANG ; Jing-Wei ZHOU ; Jia-Wen LIU ; Wen-Bo FEI ; Shi-Ru HUANG ; Yu-Mei CHEN ; Chong-Yang LI ; Fei-Fei LI ; Qiao-Ling MA ; Fu WANG ; Yuan HU ; You-Ping LIU ; Shi-Lin CHEN ; Lin CHEN ; Hong-Ping CHEN
China Journal of Chinese Materia Medica 2025;50(5):1209-1223
The phase changes and quantity-quality transfer of 17 batches of Ostreae Concha(Ostrea rivularis) during the raw material-calcined decoction pieces-standard decoction process were analyzed. The content of calcium carbonate(CaCO_3), the main component, was determined by chemical titration, and the extract yield and transfer rate were calculated. The CaCO_3 content in the raw material, calcined decoction pieces, and standard decoction was 94.39%-98.80%, 95.03%-99.22%, and 84.58%-90.47%, respectively. The process of raw material to calcined decoction pieces showed the yield range of 96.85% to 98.55% and the CaCO_3 transfer rate range of 96.92% to 99.27%. The process of calcined decoction pieces to standard decoction showed the extract yield range of 2.86% to 5.48% and the CaCO_3 transfer rate range of 2.59% to 5.13%. The results of X-ray fluorescence(XRF) assay showed that the raw material, calcined decoction pieces, and standard decoction mainly contained Ca, Na, Mg, Si, Br, Cl, Al, Fe, Cr, Mn, and K. The chemometric results showed an increase in the relative content of Cr, Fe, and Si from raw material to calcined decoction pieces and an increase in the relative content of Mg, Al, Br, K, Cl, and Na from calcined decoction pieces to standard decoction. X-ray diffraction(XRD) was employed to establish XRD characteristic patterns of the raw material, calcined decoction pieces, and standard decoction. The XRD results showed that the main phase of all three was calcite, and no transformation of crystalline form or generation of new phase was observed. Fourier transform infrared spectroscopy(FTIR) was employed to establish the FTIR characteristic spectra of the raw material, calcined decoction pieces, and standard decoction. The FTIR results showed that the raw material had internal vibrations of O-H, C-H, C=O, C-O, and CO■ groups. Due to the loss of organic matter components after calcination, no information about the vibrations of C-H, C=O, and C-O groups was observed in the spectra of calcined decoction pieces and standard decoction. In summary, this study elucidated the quantity-quality transfer and phase changes in the raw material-calcined decoction pieces-standard decoction process by determining the CaCO_3 content, calculating the extract yield and transfer rate, and comparing the element changes, FTIR characteristic spectra, and XRD characteristic pattern. The results were reasonable and reliable, laying a foundation for the subsequent process research and quality control of the formula granules of calcined Ostreae Concha(O. rivularis Gould), and providing ideas and methods for the quality control of the whole process of raw material-decoction pieces-standard decoction-formula granules of Ostreae Concha and other testacean traditional Chinese medicine.
Drugs, Chinese Herbal/isolation & purification*
;
Calcium Carbonate/analysis*
;
Quality Control
8.Effects of total extract of Anthriscus sylvestris on immune inflammation and thrombosis in rats with pulmonary arterial hypertension based on TGF-β1/Smad3 signaling pathway.
Ya-Juan ZHENG ; Pei-Pei YUAN ; Zhen-Kai ZHANG ; Yan-Ling LIU ; Sai-Fei LI ; Yuan RUAN ; Yi CHEN ; Yang FU ; Wei-Sheng FENG ; Xiao-Ke ZHENG
China Journal of Chinese Materia Medica 2025;50(9):2472-2483
This study aimed to explore the effects and mechanisms of total extracts from Anthriscus sylvestris on pulmonary hypertension in rats. Sixty male SD rats were divided into normal(NC) group, model(M) group, positive drug sildenafil(Y) group, low-dose A. sylvestris(ES-L) group, medium-dose A. sylvestris(ES-M) group, and high-dose A. sylvestris(ES-H) group. On day 1, rats were intraperitoneally injected with monocrotaline(60 mg·kg~(-1)) to induce pulmonary hypertension, and the rat model was established on day 28. From days 15 to 28, intragastric administration of the respective treatments was performed. After modeling and treatment, small animal echocardiography was used to detect the right heart function of the rats. Arterial blood gas was measured using a blood gas analyzer. Hematoxylin and eosin(HE) staining and Masson staining were performed to observe cardiopulmonary pathological damage. Flow cytometry was used to detect apoptosis in the lung and myocardial tissues and reactive oxygen species(ROS) levels. Western blot was applied to detect the expression levels of transforming growth factor-β1(TGF-β1), phosphorylated mothers against decapentaplegic homolog 3(p-Smad3), Smad3, tissue plasminogen activator(t-PA), and plasminogen activator inhibitor-1(PAI-1) in lung tissue. A blood routine analyzer was used to measure inflammatory immune cell levels in the blood. Enzyme-linked immunosorbent assay(ELISA) was used to detect the expression levels of P-selectin and thromboxane A2(TXA2) in plasma. The results showed that, compared with the NC group, right heart hypertrophy index, right ventricular free wall thickness, right heart internal diameter, partial carbon dioxide pressure(PaCO_2), apoptosis in cardiopulmonary tissue, and ROS levels were significantly increased in the M group. In contrast, the ratio of pulmonary blood flow acceleration time(PAT)/ejection time(PET), right cardiac output, change rate of right ventricular systolic area, systolic displacement of the tricuspid ring, oxygen partial pressure(PaO_2), and blood oxygen saturation(SaO_2) were significantly decreased in the M group. After administration of the total extract of A. sylvestris, right heart function and blood gas levels were significantly improved, while apoptosis in cardiopulmonary tissue and ROS levels significantly decreased. Further testing revealed that the total extract of A. sylvestris significantly decreased the levels of interleukin-1β(IL-1β), interleukin-6(IL-6), and PAI-1 proteins in lung tissue, while increasing the expression of t-PA. Additionally, the extract reduced the levels of inflammatory cells such as leukocytes, lymphocytes, granulocytes, and monocytes in the blood, as well as the levels of P-selectin and TXA2 in plasma. Metabolomics results showed that the total extract of A. sylvestris significantly affected metabolic pathways, including arginine biosynthesis, tyrosine metabolism, and taurine and hypotaurine metabolism. In conclusion, the total extract of A. sylvestris may exert an anti-pulmonary hypertension effect by inhibiting the TGF-β1/Smad3 signaling pathway, thereby alleviating immune-inflammatory responses and thrombosis.
Animals
;
Male
;
Smad3 Protein/metabolism*
;
Transforming Growth Factor beta1/metabolism*
;
Rats, Sprague-Dawley
;
Rats
;
Signal Transduction/drug effects*
;
Hypertension, Pulmonary/genetics*
;
Thrombosis/immunology*
;
Drugs, Chinese Herbal/administration & dosage*
;
Humans
;
Apoptosis/drug effects*
9.A preliminary study of risk factors for the stress fracture in treated with clavicle hook plate.
Peng-Fei NIE ; Yuan-Lin XU ; Yong-Fu LI ; Lun ZHANG ; Qian-Qian ZHOU ; Jian-Nyu LUO ; Jian GUO
China Journal of Orthopaedics and Traumatology 2025;38(1):61-65
OBJECTIVE:
To investigate the effects of bone density, plate bending degree and proximal screw type on the stress fracture of clavicle hook.
METHODS:
Three sows weighing between 45 and 50 kg were selected, from which a total of 40 rivs were collected. The 15 ribs of sows were divided into 3 groups according to bone density and bone hardness with 5 rivs in each group. And then the 3 groups were fixed with 6-hole collarbone hook plates and 3 locking screws. Measure the maximum torsion force when the ribs were fractured by force. The same size 15 rids were divided into 3 groups, named forward bending group, 0° group(the angle between the plate surface and the rib surface) and reverse bending group. All fixed with 6-hole collarbone hook plates and locking screws to measure the maximum torsion force of rib stress fracture. Then the same size 10 rids were divided into 2 groups, the normal screw group and the locking screw group with 5 ribs in each group. Both groups were fixed with 6-hole collarbone hook plates and screws. The normal screw group was a normal screw, fixed in proximal end, and two locking screws. The locking screw group was fixed by locking screws. Measure the maximum torsion force of the two groups when the ribs fracture by force.
RESULTS:
In the bone density experiment, the torque force of hard bone group (104.51±6.27) N was greater than the normal bone group (75.04±3.81) N(t=8.979, P<0.05). The force of normal bone group was greater than the osteoporosis group (49.99±2.12) N(t=12.832, P<0.05). In the bending collarbone hook experiment, the order of the torque force generated by each group as follow:the forward bending group (343.59±6.18) N greater than the 0° group (106.01±5.29) N(t=65.279, P<0.05) greater than the reverse bending group (95.82±4.12) N(t=3.398, P<0.05). The force of the normal screw group (98.68±0.70) N was greater than the locking screw group (50.20±0.95) N(t=91.484, P<0.05). The data comparisons of each group were statistically significant.
CONCLUSION
Bone density, plate bending degree and proximal screw type had an impact on stress fracture of clavicle hook plate. Higher bone density, forward bending of the steel plate, and ordinary screws in proximal end can reduce the rates of stress fractures of clavicle hooks.
Animals
;
Bone Plates
;
Clavicle/surgery*
;
Swine
;
Fractures, Stress/etiology*
;
Female
;
Risk Factors
;
Fracture Fixation, Internal/instrumentation*
;
Bone Screws
;
Biomechanical Phenomena
;
Bone Density
10.Comparison of the efficacy of unilateral nailing combined with bone cement reinforcement and bilateral nailing in the treatment of osteoporotic thoracolumbar fractures.
Yu-Liang LOU ; Guo-Ying CHEN ; Can-Feng WANG ; Hui FEI ; Guan-Rong SUN ; Ren-Fu QUAN ; Wei LI ; Feng HONG
China Journal of Orthopaedics and Traumatology 2025;38(2):134-149
OBJECTIVE:
To compare the efficacy of percutaneous pedicle screw combined with unilateral nail placement combined with bone cement strengthening and bilateral nail placement in the treatment of osteoporotic thoracic and lumbar fractures.
METHODS:
A retrospective case-control study was used to analyze the clinical data of 78 patients with osteoporotic thoracic and lumbar fractures admitted from October 2017 to May 2019. According to the surgical method, it was divided into percutaneous pedicle screw combined with unilateral nail placement combined with unilateral bone cement strengthening group(bone cement group) and percutaneous pedicle screw combined with bilateral nail placement(screw group). In the bone cement group, 40 patients included 16 males and 24 females, with a mean age of (62.1±8.1) years old. In the screw group, 38 patients included 18 males and 20 females with a mean age of (65.1±9.3) years old. The operation time, intraoperative blood loss, length of hospital stay and postoperative complications were compared between two groups. The kyphosis Cobb angle, anterior edge height ratio, central height ratio and pain visual analogue score(VAS) were compared.
RESULTS:
All patients were followed up for 25 to 36 months. The operation time (70.1±17.3) min of the cement group was shorter than that of the screw group (78.6±18.2) min(P<0.05). There were no significant differences in intraoperative blood loss and length of hospital stay(P>0.05). The VAS in the cement group 1 year 1.5±0.5 and the latest follow-up 0.5±0.3 after operation were lower than 1 year 1.8±0.3 and the latest follow-up 0.8±0.4 in the screw group(P<0.05). The kyphosis Cobb angle, anterior edge height ratio, central height ratio in bone cement group, 1 year (6.2±1.2)°, (86.6±3.5)%, (91.1±2.5)%, the last follow-up (6.4±0.7)°, (85.5±3.3)%, (90.5±6.3)% were better than that of the screw group 1 year (6.8±1.4)°, (83.1±2.4)%, (89.9±3.4)% and the latest follow-up (7.1±1.1)°, (82.6±4.1)%, (87.6±5.9)%(P<0.05). There were 3 cases of bone cement leakage in the cement group, all of which had no clinical symptoms;and 2 cases of pedicle screws were extracted in the screw group, and the screws were removed at the last follow-up.
CONCLUSION
Percutaneous pedicle screw combined with unilateral nail placement combined with bone cement strengthening and bilateral nail placement in the treatment of osteoporotic thoracic and lumbar compression fractures in the elderly can achieve satisfactory efficacy and effectively relieve the pain of patients, but the former internal fixation system is more stable, and the long-term follow-up can effectively maintain the height of the anterior middle column and the correction of kyphosis deformity, and the incidence of chronic low back pain is lower.
Humans
;
Male
;
Female
;
Aged
;
Bone Cements
;
Middle Aged
;
Thoracic Vertebrae/surgery*
;
Lumbar Vertebrae/surgery*
;
Retrospective Studies
;
Spinal Fractures/surgery*
;
Osteoporotic Fractures/surgery*
;
Case-Control Studies
;
Bone Nails
;
Pedicle Screws


Result Analysis
Print
Save
E-mail