Objective To explore the possibility and genetic identification method of constructing a hepatocyte-specific NLRP3 gene knockout mouse model by using Cre-LoxP system gene knockout technology.Methods Phase one:mice specifically expressing the albumin promoter-Cre(AlbCre)recombinase in hepatocytes were mated with NLRP3flox/flox mice,and the hepatocyte-specific NLRP3 gene knockout mice with the genotype of NLRP3flox/flox/AlbCre+/-(hepatocyte NLRP3 knockout group)and the control mice in the same litter with the genotype of NLRP3flox/flox/AlbCre-/-(control group in the same litter)were obtained after two generations of selection and mating.The second stage was the mass reproduction stage.Mating NLRP3flox/flox/AlbCre+/-target mice with NLRP3flox/flox mice could quickly obtain a large number of experimental target mice and control mice in the same litter.The DNA was extracted from the tails of mice after numbering,and the offspring genotype was identified by PCR.qPCR and Western blot were used to detect the mRNA and protein expression levels of NLRP3 gene in the liver tissue.HE staining was used to observe the morphological changes in liver tissues,and serum liver transaminases and inflammatory factors were detected.The changes in body weight,liver-to-body ratio and special circumstances during reproduction and development of mice in the two groups were observed.Results The offspring genotype of the target mice in the F2 generation was consistent with theoretical result of NLRP3flox/flox/AlbCre+/-.The mRNA and protein levels of NLRP3 in liver tissues of mice in the hepatocyte NLRP3 knockout group were significantly lower than those in the control group in the same litter(P<0.05).The mice in the hepatocyte NLRP3 knockout group was not affected in terms of growth,development and reproduction after the NLRP3 gene knockout.There were no statistically significant differences in the body weight,liver-to-body ratio,liver tissue morphology,serum liver transaminase or inflammatory factors between the hepatocyte NLRP3 knockout group and the control group in the same litter(P>0.05).Conclusion The Cre-LoxP gene knockout technology can be used to successfully construct a hepatocyte-specific NLRP3 gene knockout mouse model,providing an important technical support for the next step of studying the function of the NLRP3 gene in the liver at the animal level.

Objective To explore the possibility and genetic identification method of constructing a hepatocyte-specific NLRP3 gene knockout mouse model by using Cre-LoxP system gene knockout technology.Methods Phase one:mice specifically expressing the albumin promoter-Cre(AlbCre)recombinase in hepatocytes were mated with NLRP3flox/flox mice,and the hepatocyte-specific NLRP3 gene knockout mice with the genotype of NLRP3flox/flox/AlbCre+/-(hepatocyte NLRP3 knockout group)and the control mice in the same litter with the genotype of NLRP3flox/flox/AlbCre-/-(control group in the same litter)were obtained after two generations of selection and mating.The second stage was the mass reproduction stage.Mating NLRP3flox/flox/AlbCre+/-target mice with NLRP3flox/flox mice could quickly obtain a large number of experimental target mice and control mice in the same litter.The DNA was extracted from the tails of mice after numbering,and the offspring genotype was identified by PCR.qPCR and Western blot were used to detect the mRNA and protein expression levels of NLRP3 gene in the liver tissue.HE staining was used to observe the morphological changes in liver tissues,and serum liver transaminases and inflammatory factors were detected.The changes in body weight,liver-to-body ratio and special circumstances during reproduction and development of mice in the two groups were observed.Results The offspring genotype of the target mice in the F2 generation was consistent with theoretical result of NLRP3flox/flox/AlbCre+/-.The mRNA and protein levels of NLRP3 in liver tissues of mice in the hepatocyte NLRP3 knockout group were significantly lower than those in the control group in the same litter(P<0.05).The mice in the hepatocyte NLRP3 knockout group was not affected in terms of growth,development and reproduction after the NLRP3 gene knockout.There were no statistically significant differences in the body weight,liver-to-body ratio,liver tissue morphology,serum liver transaminase or inflammatory factors between the hepatocyte NLRP3 knockout group and the control group in the same litter(P>0.05).Conclusion The Cre-LoxP gene knockout technology can be used to successfully construct a hepatocyte-specific NLRP3 gene knockout mouse model,providing an important technical support for the next step of studying the function of the NLRP3 gene in the liver at the animal level.

Objective To explore the incidence and risk factors of perioperative ischemic stroke in non-cardiac and non-neurosurgical surgeries and its correlation with preoperative risk assessment of cerebrovascular events,so as to guide perioperative risk management.Methods A retrospective study was conducted on 40 patients aged≥18 years who underwent non-cardiac and non-neurosurgical surgeries and experienced perioperative ischemic stroke in the First Affiliated Hospital of Henan University of Science and Technology from January 2015 to January 2022,forming the stroke group.A control group of 160 patients without perioperative ischemic stroke was selected in a 1:4 case-control ratio,matched for gender,age,date of operation,and the surgeon.Clinical data and preoperative risk assessment of cerebrovascular events(including the single or combined application of head CT/MRI,transcranial Doppler ultrasound,carotid ultrasound,and neurological consultation)of the two groups of patients were collected and statistically analyzed.Multiple logistic regression analysis was used to identify risk factors associated with perioperative ischemic stroke.Results The incidence of perioperative ischemic stroke was 0.042%.Multiple logistic analysis results showed that hypertension(OR=7.858,95%CI 2.175-28.388,P=0.002),hyperlipidemia(OR=4.457,95%CI 1.320-15.049,P=0.016),renal insufficiency(OR=8.277,95%CI 1.480-46.282,P=0.016),and intraoperative hypotension(OR=3.862,95%CI 1.211-12.317,P=0.022)were independent risk factors for perioperative ischemic stroke in non-cardiac and non-neurological surgeries;preoperative cerebrovascular risk assessment(OR=0.130,95%CI 0.031-0.542,P=0.005)was a protective factor against it.Conclusions The incidence of perioperative ischemic stroke in non-cardiac and non-neurosurgical surgery is low but has a poor prognosis.Hypertension,hyperlipidemia,renal insufficiency,and postoperative hypotension are risk factors for perioperative ischemic stroke,while preoperative cerebrovascular event risk assessment is beneficial to reducing its incidence.

Patients with severe trauma require an extremely timely treatment and transfusion plays an irreplaceable role in the emergency treatment of such patients. An increasing number of evidence-based medicinal evidences and clinical practices suggest that patients with severe traumatic bleeding benefit from early transfusion of low-titer group O whole blood or hemostatic resuscitation with red blood cells, plasma and platelet of a balanced ratio. However, the current domestic mode of blood supply cannot fully meet the requirements of timely and effective blood transfusion for emergency treatment of patients with severe trauma in clinical practice. In order to solve the key problems in blood supply and blood transfusion strategies for emergency treatment of severe trauma, Branch of Clinical Transfusion Medicine of Chinese Medical Association, Group for Trauma Emergency Care and Multiple Injuries of Trauma Branch of Chinese Medical Association, Young Scholar Group of Disaster Medicine Branch of Chinese Medical Association organized domestic experts of blood transfusion medicine and trauma treatment to jointly formulate Chinese expert consensus on blood support mode and blood transfusion strategies for emergency treatment of severe trauma patients ( version 2024). Based on the evidence-based medical evidence and Delphi method of expert consultation and voting, 10 recommendations were put forward from two aspects of blood support mode and transfusion strategies, aiming to provide a reference for transfusion resuscitation in the emergency treatment of severe trauma and further improve the success rate of treatment of patients with severe trauma.

Five new terpenoids, including two vibsane-type diterpenoids (1, 2) and three iridoid allosides (3-5), together with eight known ones, were isolated from the leaves and twigs of Viburnum odoratissimum var.sessiliflorum. Their planar structures and relative configurations were determined by spectroscopic methods, especially 2D NMR techniques. The sugar moieties of the iridoids were confirmed as β-D-allose by GC analysis after acid hydrolysis and acetylation. The absolute configurations of neovibsanin Q (1) and dehydrovibsanol B (2) were determined by quantum chemical calculation of their theoretical electronic circular dichroism (ECD) spectra and Rh₂(OCOCF₃)₄-induced ECD analysis. The anti-inflammatory activities of compounds 1, 3, 4, and 5 were evaluated using an LPS-induced RAW264.7 cell model. Compounds 3suppressed the release of NO in a dose-dependent manner, with an IC₅₀ value of 55.64 μmol·L^-1. The cytotoxicities of compounds 1-5 on HCT-116 cells were assessed and the results showed that compounds 2 and 3 exhibited moderate inhibitory activities with IC₅₀ values of 13.8 and 12.3 μmol·L^-1, respectively.
Terpenes/pharmacology* ; Viburnum/chemistry* ; Molecular Structure ; Diterpenes/chemistry* ; Plant Leaves/chemistry*

Hip fractures are among the most common fractures in the elderly, presenting to be a leading cause of disability and mortality. Surgical treatment is currently the main treatment method for hip fractures. The incidence of perioperative malnutrition is increased after hip fractures in the elderly due to the comorbidities, decreased basal metabolic rate, accelerated protein breakdown, weakened anabolism and surgical stress. However, malnutrition not only increases the incidence of postoperative complications, but also leads to increased mortality, indicating an important role of perioperative nursing management of nutrition for the elderly patients with hip fractures. At present, there still lacks scientific guidance and application standards on perioperative nursing management of nutrition for the elderly patients with hip fractures. Therefore, the Orthopedic Nursing Committee of Chinese Nursing Association and the Editorial Board of Chinese Journal of Trauma organized relevant experts to formulate the Expert consensus on perioperative nursing management of nutrition for elderly patients with hip fractures ( version 2023) according to evidence-based medical evidences and their clinical experiences. Fourteen recommendations were made from aspects of nutrition screening, nutrition assessment, nutrition diagnosis, nutrition intervention and nutrition monitoring to provide guidance for perioperative nursing management of nutrition in elderly patients with hip fractures.

Objective: To explore a simple and feasible method for the isolation and purification of hepatocytes, hepatic stellate cells (HSC), and lymphocytes from mice. Methods: The cell suspension was obtained from male C57bl/6 mice by hepatic perfusion through the portal vein digestion method and then isolated and purified by discontinuous Percoll gradient centrifugation. Trypan blue exclusion was used to determine cell viability. Glycogen staining, cytokeratin 18, and transmission electron microscopy were used to identify hepatic cells. Immunofluorescence was used to detect α-smooth muscle actin combined with desmin in HSCs. Flow cytometry was used to analyze lymphocyte subsets in the liver. Results: After isolation and purification, about 2.7×10(7) hepatocytes, 5.7×10(5) HSCS, and 4.6×106 hepatic mononuclear cells were obtained from the liver of mice with a body weight of about 22g. The cell survival rate in each group was > 95%. Hepatocytes were apparent in glycogen deposited purple-red granules and cytokeratin 18. Electron microscopy showed that there were abundant organelles in hepatocytes and tight junctions between cells. HSC had expressed α-smooth muscle actin and desmin. Flow cytometry showed hepatic mononuclear cells, including lymphocyte subsets such as CD4, CD8, NKs, and NKTs. Conclusion: The hepatic perfusion through the portal vein digestion method can isolate multiple primary cells from the liver of mice at once and has the features of simplicity and efficiency.
Male ; Mice ; Animals ; Keratin-18 ; Actins ; Desmin ; Liver ; Hepatocytes ; Hepatic Stellate Cells

Diagnosis, Differential ; Hemangioma/surgery* ; Humans

OBJECTIVE: To establish the fixation model of anterior cervical transpedicular system (ACTPS) after subtotal resection of two segments of lower cervical spine(C₃-C₇) in order to provide a finite element modeling method for anterior cervical reconstruction. METHODS: The CT data of the cervical segment (C₁-T₁) of a 30-year-old adult healthy male volunteer was collected. Used Mimics 10.0, Rapidform XOR3, HyperMesh 10.0, CATIA5V19 and ANSYS 14.0 to establish the three-dimensional nonlinear complete model of lower cervical spine(C₃-C₇) as the intact group. The number of units and nodes of the complete model were recorded. After the effectiveness of the complete model was verified, the C₅ and C₆ vertebral subtotal resection was performed, and the ACTPS model was established as the ACTPS group. The axial force of 75 N and moment couple of 1N·m was loaded on the upper surface of C₃ in intact group and ACTPS group, the range of motion(ROM)and stress distribution in states of flexion extension, lateral flexion, rotation was compared between two groups. RESULTS: There were 85 832 elements and 23 612 nodes in the complete model of lower cervical spine(C₃-C₇) which was established in this experiment. The stress distribution of ACTPS internal fixation model was relatively uniform. Comparing with the intact group, the overall range of motion in ACTPS group was decreased in flexion extension, lateral flexion and rotation directions, and the corresponding compensation of adjacent C_3,4 segment was increased slightly. CONCLUSION The stress distribution of ACTPS fixation system is uniform, there is no stress concentration area at the joint of screw and titanium plate, and the fracture risk of internal fixation is low. It is suitable for stability reconstruction after anterior decompression of two or more cervical segments.
Adult ; Biomechanical Phenomena ; Bone Screws ; Cervical Vertebrae/surgery* ; Finite Element Analysis ; Humans ; Male ; Range of Motion, Articular ; Spinal Fusion

OBJECTIVE: To compare accuracy of anterior cervical pedicle screws between assist of rapid prototyping 3D guide plate and free-hand insertion, and evaluate the safety of two methods. METHODS: Eight adult cervical cadaver specimens after formaldehyde immersion, including 4 males and 4 females, aged 32 to 65(40.3±5.6) years old. After X-ray examination to exclude bone damage and deformity, 4 of them (3D guide plate group) randomly selected were for CT scan to obtain DICOM format data, and the data was imported into Mimics software for model, designed the ideal entry point and nail path for anterior cervicaltranspedicular screw (ATPS). After obtaining the personalized guide plate of the nail channel, it was exported as STL data, and the individual guide plate was printed by rapid prototyping and 3D printing technology. In turn, with the assistance of 3D guide plates, one-to-one personalized ATPS screws were placed on the four lower cervical cadaver specimens. Another 4 (free-hand group) lower cervical cadaver specimens were implanted with ATPS screws using free-hand technique. All specimens were performed CT thin-layer scanning and three-dimensional reconstruction after operation. The Tomasino method was used to evaluate the safety of the screws on the CT cross-sectional and sagittal images, to determine whether there was a cortical puncture of the lower and inner edges of the pedicle. According to the CT rating results, gradeⅠandⅡwere safe, and grade Ⅲ- Ⅴ were dangerous.And the accuracy of screws was recorded and analyzed between two groups. RESULTS: Two screws were inserted in each segment from C CONCLUSION The 3D printing rapid prototyping guide plate assisted insertion of the anterior cervical pedicle screw can significantly improve the accuracy and safety, and provide a theoretical basis for further clinical application.
Adult ; Aged ; Bone Plates ; Cervical Vertebrae/surgery* ; Cross-Sectional Studies ; Female ; Humans ; Male ; Middle Aged ; Pedicle Screws ; Printing, Three-Dimensional