Enzyme separation, purification, immobilization, and catalytic performance improvement have been the research hotspots and frontiers as well as the challenges in the field of biocatalysis. Thus, the development of novel methods for enzyme purification, immobilization, and improvement of their catalytic performance and storage are of great significance. Herein, ferritin was fused with the lichenase gene to achieve the purpose. The results showed that the fused gene was highly expressed in the cells of host strains, and that the resulted fusion proteins could self-aggregate into carrier-free active immobilized enzymes in vivo. Through low-speed centrifugation, the purity of the enzymes was up to > 90%, and the activity recovery was 61.1%. The activity of the enzymes after storage for 608 h was higher than the initial activity. After being used for 10 cycles, it still maintained 50.0% of the original activity. The insoluble active lichenase aggregates could spontaneously dissolve back into the buffer and formed the soluble polymeric lichenases with the diameter of about 12 nm. The specific activity of them was 12.09 times that of the free lichenase, while the catalytic efficiency was 7.11 times and the half-life at 50 ℃ was improved 11.09 folds. The results prove that the ferritin can be a versatile tag to trigger target enzyme self-aggregation and oligomerization in vivo, which can simplify the preparation of the target enzymes, improve their catalysis performance, and facilitate their storage.
Biocatalysis ; Enzymes, Immobilized/metabolism* ; Ferritins/metabolism* ; Glycoside Hydrolases/metabolism*

Catalase is widely used in the food, medical, and textile industries. It possesses exceptional properties including high catalytic efficiency, high specificity, and environmental friendliness. Free catalase cannot be recycled and reused in industry, resulting in a costly industrial biotransformation process if catalase is used as a core ingredient. Developing a simple, mild, cost-effective, and environmentally friendly approach to immobilize catalase is anticipated to improve its utilization efficiency and enzymatic performance. In this study, the catalase KatA derived from Bacillus subtilis 168 was expressed in Escherichia coli. Following separation and purification, the purified enzyme was prepared as an immobilized enzyme in the form of enzyme-inorganic hybrid nanoflowers, and the enzymatic properties were investigated. The results indicated that the purified KatA was obtained through a three-step procedure that included ethanol precipitation, DEAE anion exchange chromatography, and hydrophobic chromatography. Then, by optimizing the process parameters, a novel KatA/Ca₃(PO₄)₂ hybrid nanoflower was developed. The optimum reaction temperature of the free KatA was determined to be 35 ℃, the optimum reaction temperature of KatA/Ca₃(PO₄)₂ hybrid nanoflowers was 30-35 ℃, and the optimum reaction pH of both was 11.0. The free KatA and KatA/Ca₃(PO₄)₂ hybrid nanoflowers exhibited excellent stability at pH 4.0-11.0 and 25-50 ℃. The KatA/Ca₃(PO₄)₂ hybrid nanoflowers demonstrated increased storage stability than that of the free KatA, maintaining 82% of the original enzymatic activity after 14 d of storage at 4 ℃, whereas the free KatA has only 50% of the original enzymatic activity. In addition, after 5 catalytic reactions, the nanoflower still maintained 55% of its initial enzymatic activity, indicating that it has good operational stability. The K_m of the free KatA to the substrate hydrogen peroxide was (8.80±0.42) mmol/L, and the k_cat/K_m was (13 151.53± 299.19) L/(mmol·s). The K_m of the KatA/Ca₃(PO₄)₂ hybrid nanoflowers was (32.75±2.96) mmol/L, and the k_cat/K_m was (4 550.67±107.51) L/(mmol·s). Compared to the free KatA, the affinity of KatA/Ca₃(PO₄)₂ hybrid nanoflowers to the substrate hydrogen peroxide was decreased, and the catalytic efficiency was also decreased. In summary, this study developed KatA/Ca₃(PO₄)₂ hybrid nanoflowers using Ca²⁺ as a self-assembly inducer, which enhanced the enzymatic properties and will facilitate the environmentally friendly preparation and widespread application of immobilized catalase.
Catalase ; Nanostructures/chemistry* ; Hydrogen Peroxide/metabolism* ; Enzymes, Immobilized/chemistry* ; Catalysis

D-allulose-3-epimerase (DPEase) is the key enzyme for isomerization of D-fructose to D-allulose. In order to improve its thermal stability, short amphiphilic peptides (SAP) were fused to the N-terminal of DPEase. SDS-PAGE analysis showed that the heterologously expressed DPEase folded correctly in Bacillus subtilis, and the protein size was 33 kDa. After incubation at 40 °C for 48 h, the residual enzyme activity of SAP1-DSDPEase was 58%. To make the recombinant B. subtilis strain reusable, cells were immobilized with a composite carrier of sodium alginate (SA) and titanium dioxide (TiO2). The results showed that 2% SA, 2% CaCl2, 0.03% glutaraldehyde solution and a ratio of TiO2 to SA of 1:4 were optimal for immobilization. Under these conditions, up to 82% of the activity of immobilized cells could be retained. Compared with free cells, the optimal reaction temperature of immobilized cells remained unchanged at 80 °C but the thermal stability improved. After 10 consecutive cycles, the mechanical strength remained unchanged, while 58% of the enzyme activity could be retained, with a conversion rate of 28.8% achieved. This study demonstrated a simple approach for using SAPs to improve the thermal stability of recombinant enzymes. Moreover, addition of TiO2 into SA during immobilization was demonstrated to increase the mechanical strength and reduce cell leakage.
Bacillus subtilis/metabolism* ; Carbohydrate Epimerases/genetics* ; Enzyme Stability ; Enzymes, Immobilized/metabolism* ; Fructose ; Hydrogen-Ion Concentration ; Racemases and Epimerases ; Temperature

A stable Zr-based metal-organic framework (MOF, UiO-66-NH2) synthesized via micro-water solvothermal method was used to immobilize amidase by using the glutaraldehyde crosslinking method. The effect of immoblization conditions on enzyme immoblization efficiency was studied. An activity recovery rate of 86.4% and an enzyme loading of 115.3 mg/g were achieved under the optimal conditions: glutaraldehyde concentration of 1.0%, cross-linking time of 180 min, and the weight ratio of MOF to enzyme of 8:1. The optimal temperature and optimal pH of the immobilized amidase were determined to be 40 °C and 9.0, respectively, and the Km, Vmax and kcat of the immoblized amidase were 58.32 mmol/L, 16.23 μmol/(min·mg), and 1 670 s⁻¹, respectively. The immobilized enzyme was used for (S)-4-fluorophenylglycine synthesis and the optimal reaction conditions were 300 mmol/L of N-phenylacetyl-4-fluorophenylglycine, 10 g/L of immobilized enzyme loading, and reacting for 180 min at pH 9.0 and 40 °C. A conversion rate of 49.9% was achieved under the optimal conditions, and the conversion rate can be increased to 99.9% under the conditions of enantiomeric excess. The immobilized enzyme can be repeatedly used, 95.8% of its original activity can be retained after 20 cycles.
Amidohydrolases ; Enzyme Stability ; Enzymes, Immobilized/metabolism* ; Glycine/analogs & derivatives* ; Hydrogen-Ion Concentration ; Metal-Organic Frameworks ; Temperature

Peptide cyclization, a pivotal approach to modifying linear precursors of proteins and pepticles, has been used to enhance their biological activities and serum stabilities. Recently, sortase A (SrtA) from Staphyloccus aureus becomes a promising new technology for efficiently incorporating site specific modifications into proteins, conjugating the cell surface and cyclizing the linear peptides. In this study, we constructed two recombinant expression systems, one with chitin binding domain and the other with six-histidine tag and chitin binding domain on the N-terminal of SrtA, separately. The results of enzymatic kinetics indicate that the two recombinant tags do not impair the transpeptidase activity of SrtA compared with the standard reaction reported under the same reaction condition. The two synthesized peptides with N-ternimal three glycines and C-terminal penta-amino acid motif, LPETG, were cyclized using immobilized and recycled SrtA. The SrtA-based cyclization promises to represent a simple method for easy and efficient enzymatic synthesis of large cyclic peptides.
Aminoacyltransferases ; metabolism ; Bacterial Proteins ; metabolism ; Cyclization ; Cysteine Endopeptidases ; metabolism ; Enzymes, Immobilized ; metabolism ; Kinetics ; Peptides ; metabolism ; Peptides, Cyclic ; biosynthesis ; Staphylococcus aureus ; enzymology

In this study, we constructed a yeast consortium surface-display expression system by using Flo1 as an anchor protein. Endoglucanase II (EGII) and cellobiohydrolase II (CBHII) from Trichoderma reesei, and β3-glucosidase 1 (BGLI) from Aspergillus aculeatus were immobilized on Saccharomyces cerevisiae Y5. We constructed the cellulose-displaying expression yeast consortium (Y5/fEGII:Y5/fCBHII:Y5/fBGLI = 1:1:1) and investigated the enzymatic ability and ethanol fermentation. The displayed cellulolytic enzymes was stabile during the 96-h fermentation. The yeast consortium produced 0.77 g/L ethanol from 10 g/L phosphoric acid swollen cellulose (PASC) within 96 h. The yield (in grams of ethanol produced per gram of carbohydrate consumed) was 0.35 g/g, which correspond to 68.6% of the theoretical yield.
Aspergillus ; enzymology ; Cellulase ; genetics ; Cellulose ; metabolism ; Cellulose 1,4-beta-Cellobiosidase ; genetics ; Enzymes, Immobilized ; genetics ; Ethanol ; metabolism ; Fermentation ; Glucosidases ; genetics ; Mannose-Binding Lectins ; metabolism ; Protein Binding ; Saccharomyces cerevisiae ; genetics ; metabolism ; Saccharomyces cerevisiae Proteins ; metabolism ; Trichoderma ; enzymology

Conducting polymers have stable long-chain structure and good electrical conductivity. They have been used in various types of biosensors because of their excellent characteristics of the immobilization and electrical signal transmission. In recent years, researchers mainly study on improving its micro-nano structures and its signal conductivity to enhance its effect on the enzyme immobilization and signal conductive properties. This paper reviews firstly the application of conducting polymer on enzyme-immobilized glucose biosensor and the new technologies and methods in this field. This paper also points out the future application of conducting polymers in enzyme immobilization and biosensor preparation areas.
Biosensing Techniques ; methods ; trends ; Blood Glucose ; metabolism ; Electric Conductivity ; Enzymes, Immobilized ; Glucose Oxidase ; metabolism ; Nanostructures ; Polymers ; chemistry

Fe (III) modified collagen fibers were used to immobilize catalase through the cross-linking of glutaraldehyde. The loading amount of catalase on the supporting matrix was 16.7 mg/g, and 35% enzymatic activity was remained. A series of experiments were conducted on free and immobilized catalase in order to investigate their optimal pH and temperature, and the thermal, storage and operation stability. Results suggest that the free and immobilized catalase prefer similar pH and temperature condition, which were pH 7.0 and 25 degrees C. It should be noted that the thermal stability of catalase was considerably improved after immobilization owing to the fact that the enzyme kept 30% of relative activity after incubation at 75 degrees C for 5 h. On the contrary, the free catalase was completely inactive. As for the storage stability, the immobilized catalase kept 88% of relative activity after stored at room temperature for 12 days while the free one was completely inactive under the same conditions. Moreover, the immobilized catalase preserved 57% of relative activity after being reused 26 times, exhibiting excellent operation stability. Consequently, this investigation suggests that collagen fiber can be used as excellent supporting matrix for the immobilization of catalase, and it is potential to be used for the immobilization of similar enzymes.
Catalase ; chemistry ; metabolism ; Collagen ; chemistry ; metabolism ; Enzymes, Immobilized ; chemistry ; metabolism ; Ferric Compounds ; chemistry

This paper reports the progress of biodiesel production with enzymatic catalysis in Beijing University of Chemical Technology, one of the leaders in biodiesel R & D in China, which includes screening of high-yield lipase production strains, optimization and scale-up of the lipase fermentation process, lipase immobilization, bioreactor development and scale-up, biodiesel separation and purification and the by-product glycerol utilization. Firstly, lipase fermentation was carried out at industrial scale with the 5 m3 stirred tank bioreactor, and the enzyme activity as high as 8 000 IU/mL was achieved by the species Candida sp. 99-125. Then, the lipase was purified and immobilized on textile membranes. Furthermore, biodiesel production was performed in the 5 m3 stirred tank bioreactor with an enzyme dosage as low as 0.42%, and biodiesel that met the German biodiesel standard was produced. And in the meantime, the byproduct glycerol was used for the production of 1,3-propanediol to partly offset the production cost of biodiesel, and 76.1 g/L 1,3-propanediol was obtained in 30 L fermentor with the species Klebsiella pneumoniae.
Biofuels ; Bioreactors ; Biotechnology ; economics ; methods ; Candida ; enzymology ; Catalysis ; China ; Enzymes, Immobilized ; metabolism ; Esterification ; Fermentation ; Lipase ; metabolism ; Plant Oils ; chemistry

The lipase labeled with the fluorescein isothiocyanat (FITC) was immobilized on the derivatives of the polyethylene glycol. The article discussed the effect of factors on the characters of lipase and analyzed the relationships among the activity of lipase, conformation, and fluorescence spectrum while the activity and the fluorescence spectrum of immobilized lipase were determined. The results demonstrated that polyethylene glycol 400-diacrylate could form appropriate network to improve the activity of enzyme. Adding ligand induced the lipase's catalytic conformation to increase the activity twice more than before. The active centre of lipase could be released by the extraction of ligand thus increasing the activity. After immobilization, the stability of labeled lipase improved greatly: immobilized lipases retained more than 70% and 60% of initial activity under conditions of 90 degrees C and strong acid or alkali, respectively. After immersing immobilized lipases into guanidine hydrochloride or urea for 15 days, the lipases retained upwards of 70% activity. The fluorescence spectrum could obviously reflect the changes of the activity and conformation of lipase. The fluorescence intensity was the minimum in the optimal pH and temperature. In the denaturing agent it declined as time passed. These results indicated that the unfolded processes of immobilized lipases are different under different conditions.
Dextrans ; chemistry ; Enzyme Stability ; Enzymes, Immobilized ; chemistry ; metabolism ; Fluorescein-5-isothiocyanate ; analogs & derivatives ; chemistry ; Fluorescent Dyes ; chemistry ; Lipase ; chemistry ; metabolism ; Polyethylene Glycols ; chemistry ; Protein Unfolding ; drug effects