In order to increase the ability of oil-emulsion adjuvant to stimulate cellular immunity, chitosan hydrochloride with positive charge was selected to stabilize oil-in-water emulsion (CHE). In this paper, model antigen ovalbumin was selected to prepare vaccines with emulsion adjuvant, commercial adjuvant or no adjuvant. The emulsion was characterized by measuring the particle size, electric potential and antigen adsorption rate. BALB/c mice were immunized by intramuscular injection. Serum antibody levels, the numbers of IL-4-secreting cells in splenocytes, cytotoxic T lymphocyte (CTL) response, and the expression of central memory T cells were measured to evaluate the immunostimulatory effect. The results showed that chitosan hydrochloride can effectively stabilize the emulsion. The emulsion size is about 600 nm, and the antigen adsorption rate is more than 90%. After immunization, CHE could increase serum antibodies levels and increase IL-4 secretion. Expression of CTL surface activation molecules was also increased to stimulate CTL response further and to increase the CD44⁺CD62L⁺ in T cells proportion. CHE as adjuvant can stimulate humoral and cellular immunity more efficiently, and is expected to extend the duration of protection.
Animals ; Mice ; Chitosan ; Interleukin-4 ; Emulsions ; Immunization ; Adjuvants, Immunologic/pharmacology* ; Antigens ; Mice, Inbred BALB C

Anti-reflective nanocoatings that mimic the eyes of fruit flies are biodegradable materials with great market potential for a variety of optical devices that require anti-reflective properties. Microbial expression of retinin provides a new idea for the preparation of nanocoatings under mild conditions compared to physicochemical methods. However, the current expression level of retinin, the key to anti-reflective coating, is low and difficult to meet mass production. In this study, we analyzed and screened the best expression hosts for Drosophila-derived retinin protein, and optimized its expression. Chinese hamster ovary (CHO) cells were identified as the efficient expression host of retinin, and purified retinin protein was obtained. At the same time, the preparation method of lanolin nanoemulsion was explored, and the best anti-reflective ability of the nano-coating was determined when the ratio of specific concentration of retinin protein and wax emulsion was 16:4, the pH of the nano-coating formation system was 7.0, and the temperature was 30 ℃. The enhanced antireflective ability and reduced production cost of artificial antireflective nanocoatings by determining the composition of nanocoatings and optimizing the concentration, pH and temperature of system components may facilitate future application of artificial green degradable antireflective coatings.
Animals ; Cricetinae ; CHO Cells ; Emulsions ; Cricetulus ; Drosophila ; Eye Proteins ; Drosophila Proteins

The effective components of flavonoids in the "Pueraria lobata-Hovenia dulcis" drug pair have low bioavailability in vivo due to their unstable characteristics. This study used microemulsions with amphoteric carrier properties to solve this problem. The study drew pseudo-ternary phase diagrams through titration compatibility experiments of the oil phase with emulsifiers and co-emulsifiers and screened the prescription composition of blank microemulsions. The study used average particle size and PDI as evaluation indicators, and the central composite design-response surface method(CCD-RSM) was used to optimize the prescription; high-dosage drug-loaded microemulsions were obtained, and their physicochemical properties, appearance, and stability were evaluated. The results showed that when ethyl butyrate was used as the oil phase, polysorbate 80(tween 80) as the surfactant, and anhydrous ethanol as the cosurfactant, the maximum microemulsion area was obtained. When the difference in results was small, K_(m )of 1∶4 was chosen to ensure the safety of the prescription. The prescription composition optimized by the CCD-RSM was ethyl butyrate(16.28%), tween 80(9.59%), and anhydrous ethanol(38.34%). When the dosage reached 3% of the system mass, the total flavonoid microemulsion prepared had a clear and transparent appearance, with average particle size, PDI, and potential of(74.25±1.58)nm, 0.277±0.043, and(-0.08±0.07) mV, respectively. The microemulsion was spherical and evenly distributed under transmission electron microscopy. The centrifugal stability and temperature stability were good, and there was no layering or demulsification phenomenon, which significantly improved the in vitro dissolution of total flavonoids.
Polysorbates/chemistry* ; Flavonoids ; Pueraria ; Surface-Active Agents/chemistry* ; Ethanol ; Emulsions ; Particle Size ; Solubility

With the continuous exploration of microemulsions as solvents for traditional Chinese medicine extraction, polyoxyethy-lene(35) castor oil(CrEL), a commonly used surfactant, is being utilized by researchers. However, the problem of detecting residues of this surfactant in microemulsion extracts has greatly hampered the further development of microemulsion solvents. Based on the chemical structures of the components in CrEL and the content determination method of castor oil in the 2020 edition of the Chinese Pharmacopoeia(Vol. Ⅳ), this study employed gas chromatography(GC) and single-factor experiments to optimize the preparation method of methyl ricinoleate from CrEL. The conversion coefficient between the two was validated, and the optimal sample preparation method was used to process microemulsion extracts of Zexie Decoction from three batches. The content of methyl ricinoleate generated was determined, and the content of CrEL in the microemulsion extracts of Zexie Decoction was calculated using the above conversion coefficient. The results showed that the optimal preparation method for CrEL was determined. Specifically, 10 mL of 1 mol·L~(-1) KOH-methanol solution was heated at 60 ℃ for 15 min in a water bath. Subsequently, 10 mL of boron trifluoride etherate-methanol(1∶3) solution was heated at 60 ℃ for 15 min in a water bath, followed by extraction with n-hexane twice. CrEL could stably produce 20.84% methyl ricinoleate. According to this conversion coefficient, the average mass concentration of CrEL in the three batches of Zexie Decoction microemulsion extracts was 11.94 mg·mL~(-1), which was not significantly different from the CrEL mass concentration of 11.57 mg·mL~(-1) during microemulsion formulation, indicating that the established content determination method of this study was highly accurate, sensitive, and repeatable. It can be used for subsequent research on microemulsion extracts of Zexie Decoction and provide a reference for quality control of other drug formulations containing CrEL.
Polyethylene Glycols/chemistry* ; Castor Oil ; Methanol ; Surface-Active Agents/chemistry* ; Solvents ; Water/chemistry* ; Emulsions/chemistry*

Salvianolic acid B(Sal B), tanshinone Ⅱ_A(TSN Ⅱ_A), and glycyrrhetinic acid(GA) lipid emulsion(GTS-LE) was prepared by the high-speed dispersion method combined with ultrasonic emulsification.The preparation process of the emulsion was optimized by single-factor method and D-optimal method with appearance, centrifugal stability, and particle size of the emulsion as evalua-tion indexes, followed by verification.In vitro release of Sal B, TSN Ⅱ_A, and GA in GTS-LE was performed by reverse dialysis.In vivo pharmacokinetic evaluation was carried out in mice.The acute liver injury model was induced by acetaminophen.The effect of oral GTS-LE on the acute liver injury was investigated by serum liver function indexes and pathological changes in liver tissues of mice.The results showed that under the optimal preparation process, the average particle size of GTS-LE was(145.4±9.25) nm and the Zeta potential was(-33.6±1.45) mV.The drug-loading efficiencies of Sal B, TSN Ⅱ_A, and GA in GTS-LE were above 95%, and the drug release in vitro conformed to the Higuchi equation.The pharmacokinetic results showed that the C_(max) of Sal B, TSN Ⅱ_A, and GA in GTS-LE was 3.128, 2.7, and 2.85 times that of the GTS-S group, and AUC_(0-t) of Sal B, TSN Ⅱ_A, and GA in GTS-LE was 3.09, 2.23, and 1.9 times that of the GTS-S group.After intragastric administration of GTS-LE, the activities of alanine aminotransferase and aspartate aminotransferase were significantly inhibited, the content of malondialdehyde was reduced, and the structure of hepatocytes recovered to normal.In conclusion, GTS-LE can delay the release of Sal B and promote the release of TSN Ⅱ_A and GA.The encapsulation of three drug components in the emulsion can improve the oral bioavailability to varying degrees and can effectively prevent the acute liver injury caused by acetaminophen.
Abietanes/therapeutic use* ; Acetaminophen/therapeutic use* ; Alanine Transaminase/metabolism* ; Animals ; Antipyretics/therapeutic use* ; Aspartate Aminotransferases/metabolism* ; Benzofurans/therapeutic use* ; Chemical and Drug Induced Liver Injury/prevention & control* ; Depsides/therapeutic use* ; Emulsions ; Glycyrrhetinic Acid/therapeutic use* ; Liver/drug effects* ; Malondialdehyde ; Mice

A new quercetin nanocrystals self-stabilized Pickering emulsion(QT-NSSPE) was prepared by high-pressure homogenization combined with probe ultrasonic method. The influences of oil fraction, quercetin(QT) concentration, and pH of water phase on the formation of QT-NSSPE were investigated. On this basis, the QT-NSSPE prepared under optimal conditions was evaluated in terms of microstructure, stability, and in vitro release and the droplet size and drug loading were 15.82 μm and 4.87 mg·mL~(-1), respectively. The shell structure formed by quercetin nanocrystals(QT-NC) on the emulsion droplet surface was observed under a scanning electron microscope(SEM). X-ray diffraction(XRD) showed that the crystallinity of adsorbed QT-NC decreased significantly as compared with the raw QT. There were not significant changes of QT-NSSPE properties after 30 days of storage at room temperature. The in vitro release experiment confirmed that QT-NSSPE has a higher accumulative release rate than the raw QT. All these results indicated that QT-NSSPE has a great stability and a satisfactory in vitro release behavior, which is a promising new oral delivery system for QT.
Emulsions/chemistry* ; Nanoparticles ; Particle Size ; Quercetin ; Water/chemistry*

This study aims to establish a method for determination of paeonol(Pae), eugenol(Eug), and piperine(Pip) content in receptor liquid and research on the permeability and pharmacokinetics of Huoxue Zhitong gel patch and microemulsion gel. The Franz diffusion experiment was conducted to assess the percutaneous permeability, and the microdialysis method was employed to assess pharmacokinetics of Huoxue Zhitong gel patch and microemulsion gel. The content of Pae, Eug, and Pip in receptor liquid in vitro and in vivo was determined by HPLC and UPLC-MS. The Q_n and J_(ss) of Pae, Eug, and Pip in the gel patch were significantly higher than those in the microemulsion gel, indicating that the drug release was faster in the gel patch. The C_(max), AUC_(0-760), and MRT of Pae, Eug, and Pip in the gel patch were higher than those in the microemulsion gel, indicating that the gel patch can promote the penetration and prolong the skin residence of the drug. The results of this study provide reference for improving the dosage form of Huoxue Zhitong patch.
Administration, Cutaneous ; Chromatography, Liquid ; Emulsions ; Permeability ; Skin/metabolism* ; Skin Absorption ; Tandem Mass Spectrometry

Moslae Herba is a commonly used aromatic Chinese medicinal with volatile oil as the main effective component and exhibits broad-spectrum antibacterial and antiviral effects. However, the irritation and instability of Moslae Herba volatile oil necessitate the preparation into a specific dosage form. In this study, the steam distillation method was employed to extract the Moslae Herba volatile oil. The content of thymol and carvacrol in Moslae Herba volatile oil was determined by HPLC as(0.111 9±0.001 0) and(0.235 4±0.004 7) mg·mL~(-1), respectively. Pseudo-ternary phase diagrams and surfactants compounding were applied in the selection of the optimal excipients(surfactant and cosurfactant). On this basis, a nanoemulsion was prepared from the Moslae Herba volatile oil and then loaded into pressure vessels to get sprays, whose stability and antibacterial activity were evaluated afterward. With clarity, viscosity, smell and body feeling as comprehensive indexes, the optimal formulation of the Moslae Herba volatile oil nanoemulsion was determined as follows: Moslae Herba volatile oil∶peppermint oil∶cremophor EL∶absolute ethanol∶distilled water 7.78∶1.58∶19.26∶6.15∶65.23. The as-prepared nanoemulsion was a light yellow transparent liquid, with Tyndall effect shown under the irradiation of parallel light. It has the pH of 5.50, conductivity of 125.9 μS·cm~(-1), average particle size of 15.45 nm, polydispersity index(PDI) of 0.156, and Zeta potential of-17.9 mV. Under a transmission electron microscope, the Moslae Herba volatile oil nanoemulsion was presented as regular spheres without adhesion and agglomeration. Stability test revealed that the Moslae Herba volatile oil nanoemulsion was stable at 4-55 ℃, which was free from demulsification and stratification within 30 days. After the centrifugation at 12 000 r·min~(-1) for 30 min, there was no stratification either. The nanoemulsion had good inhibitory effects on Escherichia coli, Staphylococcus aureus and resistant S. aureus strains, with the minimum inhibitory concentrations of 0.39, 3.12 and 1.56 mg·mL~(-1), respectively. The above results demonstrated that the nanoemulsion was prepared feasibly and showed stable physical and chemical properties and good antibacterial effects. This study provides a practicable technical solution for the development of anti-epidemic and anti-infection products from Moslae Herba volatile oil.
Anti-Bacterial Agents/pharmacology* ; Emulsions ; Methicillin-Resistant Staphylococcus aureus ; Microbial Sensitivity Tests ; Oils, Volatile ; Particle Size

This study explores the emulsifying material basis of Angelicae Sinensis Radix volatile oil (ASRVO) based on partial least squares (PLS) method and hydrophile-lipophile balance (HLB) value.The turbidity of ASRVO emulsion samples from Gansu,Yunnan,and Qinghai was determined and the chemical components in the emulsion were analyzed by GC-MS.The PLS model was established with the chemical components as the independent variable and the turbidity as the dependent variable and evaluated with indexes R~2X and R~2Y.The chemical components which were in positive correlation with the turbidity were selected and the HLB values were calculated to determine the emulsification material basis of ASRVO.The PLS models for the 81 emulsion samples had high R~2X and R~2Y values,which showed good fitting ability.Seven chemical components,2-methoxy-4-vinylphenol,trans-ligustilide,3-butylidene-1(3H)-isobenzofuranone,dodecane,1-methyl-4-(1-methylethylidene)-cyclohexene,trans-beta-ocimene,and decane,had positive correlation with turbidity.Particularly,the HLB value of 2-methoxy-4-vinylphenol was 4.4,which was the HLB range of surfactants to be emulsifiers and 2-methoxy-4-vinylphenol was positively correlated with turbidity of the ASRVO emulsion samples from the main producing area.Therefore,2-methoxy-4-vinylphenol was the emulsifying material basis of ASRVO.The selected emulsifying substances can lay a foundation for exploring the emulsification mechanism and demulsification solution of ASRVO.
China ; Emulsions ; Least-Squares Analysis ; Oils, Volatile ; Surface-Active Agents

This study was mainly based on the compatibility of Puerariae Lobatae Radix and Chuanxiong Rhizoma to prepare submicron emulsion and evaluated its physical and pharmaceutical properties. Firstly, pseudo-ternary phase diagrams were drawn by dripping method which took Chuanxiong oil as the oil phase and the area of microemulsion region as the index. On this basis, suitable emulsifier and co-emulsifier were screened for the preparation of Chuanxiong oil submicron emulsion. Then, the formula realizing the largest oil loading was selected. Finally, puerarin substituted part of emulsifier and co-emulsifier to lower their content, so as to form puerarin-Chuanxiong oil submicron emulsion featuring the combination of medicine and adjuvant. Its particle size, zeta potential, centrifugal stability and storage stability were determined, and the in vitro drug release behavior was investigated by dialysis bag method, based on which the quality of the as-prepared submicron emulsion was evaluated comprehensively. The proposed method was proved feasible for the preparation of Chuanxiong oil submicron emulsion, which adopted polyoxyethylene castor oil(EL-40) as the emulsifier and was free from co-emulsifier. The formula of the maximum oil loading was found as Chuanxiong oil∶EL-40∶water 3∶7∶90. Further, puera-rin successfully replaced up to 10% of the emulsifier in submicron emulsion. Eventually, the optimal drug-loading formula was determined as puerarin∶Chuanxiong oil∶EL-40∶water 7∶30∶63∶900. The quality evaluation results of the as-prepared submicron emulsion demonstrated that the average emulsion droplet size was 333.9 nm, the PDI 0.26, and the zeta potential-10.12 mV. The submicron emulsion had a good centrifugal stability and did not present any instable phenomena such as delamination and precipitation during its standing still for 50 days. The evaluation of in vitro drug release behavior indicated that the submicron emulsion was capable of releasing the drug completely. The puerarin-chuanxiong oil submicron emulsion prepared in this study possessed a stable quality and to some extent increased the solubility of puerarin along with a sustained-release effect. This study provided ideas for the clinical application of puerarin.
Emulsions ; Isoflavones ; Particle Size ; Solubility