Background: This study aimed to report the short- and midterm outcomes of arthroscopic rotator cuff repair (ARCR) and reverse shoulder arthroplasty (RSA) in weight-bearing shoulders. Methods: This retrospective multicenter study included 19 cases of ARCR and 10 cases of RSA performed in weight-bearing shoulders from 2009 to 2021. In the ARCR group, postoperative 6-month magnetic resonance imaging confirmed the tendon integrity. In the RSA group, scapular notching, acromial fracture, and implant failure were assessed using plain radiographs, and complications were recorded. In both groups, preoperative and postoperative range of motion and functional scores were documented, along with subjective satisfaction and arm use for weight-bearing on the shoulders. For patients followed up for > 5 years, a midterm analysis was performed. Results: The ARCR group included 8 men and 11 women (average age, 58.8 ± 8.0 years). Initially, Patte types 1, 2, and 3 were noted in 9, 8, and 2 patients, respectively, and 4 patients exhibited full-thickness subscapularis tears. Four patients showed supraspinatus retear, and 2 patients showed subscapularis retear. Retear of any rotator cuff was observed in 5 patients (26.3%). Twelve patients were followed up for > 5 years; 11 (91.7%) used their operated arm for weight-bearing and 9 (75.0%) were satisfied. The RSA group included 5 men and 5 women (average age, 74.3 ± 7.9 years). Procedures included RSAs for cuff tear arthropathy (n = 6), osteoarthritis (n = 3), and fracture nonunion (n = 1). No cases of dislocation, prosthesis loosening, or disassociation were observed throughout the follow-up. However, 1 patient required implant removal due to infection, and 4 patients showed stage 1 scapular notching. Five patients were followed up for > 5 years, all of whom expressed satisfaction and used their operated arms for weight-bearing, despite mean forward flexion (107.5° ± 12.6°) and American Shoulder and Elbow Surgeons score (61.5 ± 5.3) being less than reported patient acceptable symptomatic state (110° and 76, respectively). Conclusions Both ARCR and RSA showed promising outcomes in terms of weight-bearing on the operated arm and subjective satisfaction at short- and midterm follow-up. Therefore, neither of these surgeries should be considered contraindicated for patients with weight-bearing shoulder conditions.

Background: This study aimed to report the short- and midterm outcomes of arthroscopic rotator cuff repair (ARCR) and reverse shoulder arthroplasty (RSA) in weight-bearing shoulders. Methods: This retrospective multicenter study included 19 cases of ARCR and 10 cases of RSA performed in weight-bearing shoulders from 2009 to 2021. In the ARCR group, postoperative 6-month magnetic resonance imaging confirmed the tendon integrity. In the RSA group, scapular notching, acromial fracture, and implant failure were assessed using plain radiographs, and complications were recorded. In both groups, preoperative and postoperative range of motion and functional scores were documented, along with subjective satisfaction and arm use for weight-bearing on the shoulders. For patients followed up for > 5 years, a midterm analysis was performed. Results: The ARCR group included 8 men and 11 women (average age, 58.8 ± 8.0 years). Initially, Patte types 1, 2, and 3 were noted in 9, 8, and 2 patients, respectively, and 4 patients exhibited full-thickness subscapularis tears. Four patients showed supraspinatus retear, and 2 patients showed subscapularis retear. Retear of any rotator cuff was observed in 5 patients (26.3%). Twelve patients were followed up for > 5 years; 11 (91.7%) used their operated arm for weight-bearing and 9 (75.0%) were satisfied. The RSA group included 5 men and 5 women (average age, 74.3 ± 7.9 years). Procedures included RSAs for cuff tear arthropathy (n = 6), osteoarthritis (n = 3), and fracture nonunion (n = 1). No cases of dislocation, prosthesis loosening, or disassociation were observed throughout the follow-up. However, 1 patient required implant removal due to infection, and 4 patients showed stage 1 scapular notching. Five patients were followed up for > 5 years, all of whom expressed satisfaction and used their operated arms for weight-bearing, despite mean forward flexion (107.5° ± 12.6°) and American Shoulder and Elbow Surgeons score (61.5 ± 5.3) being less than reported patient acceptable symptomatic state (110° and 76, respectively). Conclusions Both ARCR and RSA showed promising outcomes in terms of weight-bearing on the operated arm and subjective satisfaction at short- and midterm follow-up. Therefore, neither of these surgeries should be considered contraindicated for patients with weight-bearing shoulder conditions.

Background: This study aimed to report the short- and midterm outcomes of arthroscopic rotator cuff repair (ARCR) and reverse shoulder arthroplasty (RSA) in weight-bearing shoulders. Methods: This retrospective multicenter study included 19 cases of ARCR and 10 cases of RSA performed in weight-bearing shoulders from 2009 to 2021. In the ARCR group, postoperative 6-month magnetic resonance imaging confirmed the tendon integrity. In the RSA group, scapular notching, acromial fracture, and implant failure were assessed using plain radiographs, and complications were recorded. In both groups, preoperative and postoperative range of motion and functional scores were documented, along with subjective satisfaction and arm use for weight-bearing on the shoulders. For patients followed up for > 5 years, a midterm analysis was performed. Results: The ARCR group included 8 men and 11 women (average age, 58.8 ± 8.0 years). Initially, Patte types 1, 2, and 3 were noted in 9, 8, and 2 patients, respectively, and 4 patients exhibited full-thickness subscapularis tears. Four patients showed supraspinatus retear, and 2 patients showed subscapularis retear. Retear of any rotator cuff was observed in 5 patients (26.3%). Twelve patients were followed up for > 5 years; 11 (91.7%) used their operated arm for weight-bearing and 9 (75.0%) were satisfied. The RSA group included 5 men and 5 women (average age, 74.3 ± 7.9 years). Procedures included RSAs for cuff tear arthropathy (n = 6), osteoarthritis (n = 3), and fracture nonunion (n = 1). No cases of dislocation, prosthesis loosening, or disassociation were observed throughout the follow-up. However, 1 patient required implant removal due to infection, and 4 patients showed stage 1 scapular notching. Five patients were followed up for > 5 years, all of whom expressed satisfaction and used their operated arms for weight-bearing, despite mean forward flexion (107.5° ± 12.6°) and American Shoulder and Elbow Surgeons score (61.5 ± 5.3) being less than reported patient acceptable symptomatic state (110° and 76, respectively). Conclusions Both ARCR and RSA showed promising outcomes in terms of weight-bearing on the operated arm and subjective satisfaction at short- and midterm follow-up. Therefore, neither of these surgeries should be considered contraindicated for patients with weight-bearing shoulder conditions.

Background: This study aimed to report the short- and midterm outcomes of arthroscopic rotator cuff repair (ARCR) and reverse shoulder arthroplasty (RSA) in weight-bearing shoulders. Methods: This retrospective multicenter study included 19 cases of ARCR and 10 cases of RSA performed in weight-bearing shoulders from 2009 to 2021. In the ARCR group, postoperative 6-month magnetic resonance imaging confirmed the tendon integrity. In the RSA group, scapular notching, acromial fracture, and implant failure were assessed using plain radiographs, and complications were recorded. In both groups, preoperative and postoperative range of motion and functional scores were documented, along with subjective satisfaction and arm use for weight-bearing on the shoulders. For patients followed up for > 5 years, a midterm analysis was performed. Results: The ARCR group included 8 men and 11 women (average age, 58.8 ± 8.0 years). Initially, Patte types 1, 2, and 3 were noted in 9, 8, and 2 patients, respectively, and 4 patients exhibited full-thickness subscapularis tears. Four patients showed supraspinatus retear, and 2 patients showed subscapularis retear. Retear of any rotator cuff was observed in 5 patients (26.3%). Twelve patients were followed up for > 5 years; 11 (91.7%) used their operated arm for weight-bearing and 9 (75.0%) were satisfied. The RSA group included 5 men and 5 women (average age, 74.3 ± 7.9 years). Procedures included RSAs for cuff tear arthropathy (n = 6), osteoarthritis (n = 3), and fracture nonunion (n = 1). No cases of dislocation, prosthesis loosening, or disassociation were observed throughout the follow-up. However, 1 patient required implant removal due to infection, and 4 patients showed stage 1 scapular notching. Five patients were followed up for > 5 years, all of whom expressed satisfaction and used their operated arms for weight-bearing, despite mean forward flexion (107.5° ± 12.6°) and American Shoulder and Elbow Surgeons score (61.5 ± 5.3) being less than reported patient acceptable symptomatic state (110° and 76, respectively). Conclusions Both ARCR and RSA showed promising outcomes in terms of weight-bearing on the operated arm and subjective satisfaction at short- and midterm follow-up. Therefore, neither of these surgeries should be considered contraindicated for patients with weight-bearing shoulder conditions.

Through the use of intraoral scanners, it is possible to obtain intraoral scan impressions and produce prostheses. This approach isalso being attempted not only in dentate patients but also in edentulous patients. However, obtaining scans of edentulous areas can be more challenging than scanning dental areas, and there may be limitations, especially in capturing the details of the mucosal tissues. On the other hand, when obtaining impressions with intraoral scanners, simultaneous recording of the occlusal relationship of the maxilla and mandible can reduce the number of patient visits and expedite the restoration process. In this case, we aimed to combine the advantages of direct intraoral scanning and indirect digital impressions obtained after traditional impression-taking by merging two types of scan files. Consequently, in patients with partially edentulous arches, we sought to provide effective in-terim prostheses through direct and indirect digital model impressions and report our findings accordingly.

Through the use of intraoral scanners, it is possible to obtain intraoral scan impressions and produce prostheses. This approach isalso being attempted not only in dentate patients but also in edentulous patients. However, obtaining scans of edentulous areas can be more challenging than scanning dental areas, and there may be limitations, especially in capturing the details of the mucosal tissues. On the other hand, when obtaining impressions with intraoral scanners, simultaneous recording of the occlusal relationship of the maxilla and mandible can reduce the number of patient visits and expedite the restoration process. In this case, we aimed to combine the advantages of direct intraoral scanning and indirect digital impressions obtained after traditional impression-taking by merging two types of scan files. Consequently, in patients with partially edentulous arches, we sought to provide effective in-terim prostheses through direct and indirect digital model impressions and report our findings accordingly.

Through the use of intraoral scanners, it is possible to obtain intraoral scan impressions and produce prostheses. This approach isalso being attempted not only in dentate patients but also in edentulous patients. However, obtaining scans of edentulous areas can be more challenging than scanning dental areas, and there may be limitations, especially in capturing the details of the mucosal tissues. On the other hand, when obtaining impressions with intraoral scanners, simultaneous recording of the occlusal relationship of the maxilla and mandible can reduce the number of patient visits and expedite the restoration process. In this case, we aimed to combine the advantages of direct intraoral scanning and indirect digital impressions obtained after traditional impression-taking by merging two types of scan files. Consequently, in patients with partially edentulous arches, we sought to provide effective in-terim prostheses through direct and indirect digital model impressions and report our findings accordingly.

Objectives: This study investigated the impacts of exercise on irisin and fibroblast growth factor 21 (FGF-21) expression, as well as triiodothyronine (T3) and free fatty acid (FFA) levels in elderly women. Methods: Thirty women aged 65 to 70 years (10 per group) were randomly assigned to aquatic exercise, land exercise, and control groups. The aquatic and land groups engaged in 3 exercise sessions per week (60 min/session) for 16 weeks. The intensity was progressively increased every 4 weeks. Results: Irisin and FGF-21 levels significantly increased in the aquatic exercise group. In the post-test, the aquatic exercise group had the highest irisin levels. Significant findings were observed for irisin and FGF-21 for the main effect between aquatic and band exercise groups (p<0.05 for both), the main effect between measurement times (p<0.01 and p<0.001, respectively), and the interaction effect (p<0.05 and p<0.001, respectively). The irisin level was significantly higher in the aquatic than in the land group 30 minutes after the last session (p<0.05). In both exercise groups, T3 levels were significantly higher 30 minutes after the final session (p<0.05) than before the program. The FFA level was significantly higher in the aquatic exercise group than the others. In the aquatic group, FFA levels were significantly higher 30 minutes after both the first (p<0.01) and the last (p<0.001) session compared to pre-program values. Conclusion Differences in exercise type and environment can promote fat metabolism by stimulating hormonal changes that induce brown fat activity and browning.

PURPOSE: Surface finishing of a zirconia restoration is essential after clinical adjustment. Herein, we investigated the effects of a surface finishing protocol for monolithic zirconia on final roughness and bacterial adherence. MATERIALS AND METHODS: Forty-eight disk-shaped monolithic zirconia specimens were fabricated and divided into four groups (n = 12) based on initial surface treatment, finishing, and polishing protocols: diamond bur+polishing bur (DP group), diamond bur+stone grinding bur+polishing bur (DSP group), no diamond bur+polishing bur (NP group), and no diamond bur+stone grinding bur+polishing bur (NSP group). Initial and final surface roughness was measured with a profilometer, and shown using scanning electron microscope. Bacterial adhesion was evaluated by quantifying Streptococcus mutans in the biofilm. Kruskal-Wallis and Mann-Whitney U tests were used to compare results among groups, and two-way analysis of variance was used to evaluate the effects of grinding burs on final roughness (α=.05). RESULTS: The DP group had the highest final Ra value, followed by the DSP, NP, and NSP groups. Use of the stone grinding bur as a coarse-finishing step significantly decreased final Ra values when a diamond bur was used (P < .001). Omission of the stone grinding bur increased biofilm formation on specimen surfaces. Combining a stone grinding bur with silicone polishing burs produced the smallest final biofilm values, regardless of the use of a diamond bur in initial surface treatment. CONCLUSION: Coarse finishing of monolithic zirconia with a stone grinding bur significantly decreased final Ra values and bacterial biofilm formation when surfaces had been roughened by a diamond bur.
Bacterial Adhesion ; Biofilms ; Dental Instruments ; Dental Polishing ; Diamond ; Silicon ; Silicones ; Streptococcus mutans

PURPOSE: The purpose of this study was to evaluate the effects of various protocols and systems for finishing and polishing monolithic zirconia on surface topography, phase transformation, and bacterial adhesion. MATERIALS AND METHODS: Three hundred monolithic zirconia specimens were fabricated and then treated with three finishing and polishing systems (Jota [JO], Meisinger [ME], and Edenta [ED]) using four surface treatment protocols: coarse finishing alone (C); coarse finishing and medium polishing (CM); coarse finishing and fine polishing (CF); and coarse finishing, medium polishing, and fine polishing (CMF). Surface roughness, crystal phase transformation, and bacterial adhesion were evaluated using atomic force microscopy, X-ray diffraction, and streptococcal biofilm formation assay, respectively. One-way and two-way analysis of variance with Tukey post hoc tests were used to analyze the results (α=.05). RESULTS: In this study, the surface treatment protocols and systems had significant effects on the resulting roughness. The CMF protocol produced the lowest roughness values, followed by CM and CF. Use of the JO system produced the lowest roughness values and the smallest biofilm mass, while the ME system produced the smallest partial transformation ratio. The ED group exhibited the highest roughness values, biofilm mass, and partial transformation ratio. CONCLUSION: Stepwise surface treatment of monolithic zirconia, combined with careful polishing system selection, is essential to obtaining optimal microstructural and biological surface results.
Bacterial Adhesion ; Biofilms ; Clinical Protocols ; Dental Polishing ; Microscopy, Atomic Force ; X-Ray Diffraction