Background: The objective of this study was to investigate sequential changes in range of motion (ROM) and histopathology of the joint capsule after remobilization in a rat adhesive capsulitis (AC) model using cast immobilization. Methods: Thirty-five 6-week-old Sprague-Dawley rats were immobilized with casting of the left shoulder. After 4 weeks, the rats were randomly divided into 7 groups (n = 5 per group) according to the duration of remobilization following cast removal: 0 (D0), 1 (W1), 2 (W2), 3 (W3), 4 (W4), 5 (W5), and 6 (W6) weeks. At each time point, 5 rats were euthanized for measurement of the glenohumeral abduction angle and evaluation of capsular thickness in the axillary recess. Results: Abduction angle was sequentially increased at each time point after remobilization with cast removal. Significant differences between immobilized and non-immobilized shoulders were observed at D0 (130.4° vs 161.3°), W1 (144.7° vs 160.7°), and W2 (142.3° vs 161.3°). Significant differences in capsular thickness of the axillary recess were observed between immobilized and non-immobilized shoulders at all time periods including D0 (98.0 μm vs. 12.9 μm), W1 (117.7 μm vs. 12.2 μm), W2 (115.7 μm vs.13.1 μm), W3 (54.1 μm vs. 14.9 μm), W4 (54.5 μm vs. 13.4 μm), W5 (23.8 μm vs. 13.5 μm), and W6 (19.8 μm vs. 12.4 μm). Significant differences in capsular fibrosis scores were observed between immobilized and non-immobilized shoulders at W1 (2.2 vs. 0.2) and W2 (2.2 vs. 0.0). Conclusions Our study showed that ROM increased sequentially after remobilization in a rat AC model using cast immobilization, and it was normalized at 6 weeks after cast removal. Capsular thickening decreased sequentially, but remained at 6 weeks after cast removal. These findings may provide useful information for further research into verifying potential therapeutic targets using a rat AC model with cast immobilization.

Background: This study aimed to report the short- and midterm outcomes of arthroscopic rotator cuff repair (ARCR) and reverse shoulder arthroplasty (RSA) in weight-bearing shoulders. Methods: This retrospective multicenter study included 19 cases of ARCR and 10 cases of RSA performed in weight-bearing shoulders from 2009 to 2021. In the ARCR group, postoperative 6-month magnetic resonance imaging confirmed the tendon integrity. In the RSA group, scapular notching, acromial fracture, and implant failure were assessed using plain radiographs, and complications were recorded. In both groups, preoperative and postoperative range of motion and functional scores were documented, along with subjective satisfaction and arm use for weight-bearing on the shoulders. For patients followed up for > 5 years, a midterm analysis was performed. Results: The ARCR group included 8 men and 11 women (average age, 58.8 ± 8.0 years). Initially, Patte types 1, 2, and 3 were noted in 9, 8, and 2 patients, respectively, and 4 patients exhibited full-thickness subscapularis tears. Four patients showed supraspinatus retear, and 2 patients showed subscapularis retear. Retear of any rotator cuff was observed in 5 patients (26.3%). Twelve patients were followed up for > 5 years; 11 (91.7%) used their operated arm for weight-bearing and 9 (75.0%) were satisfied. The RSA group included 5 men and 5 women (average age, 74.3 ± 7.9 years). Procedures included RSAs for cuff tear arthropathy (n = 6), osteoarthritis (n = 3), and fracture nonunion (n = 1). No cases of dislocation, prosthesis loosening, or disassociation were observed throughout the follow-up. However, 1 patient required implant removal due to infection, and 4 patients showed stage 1 scapular notching. Five patients were followed up for > 5 years, all of whom expressed satisfaction and used their operated arms for weight-bearing, despite mean forward flexion (107.5° ± 12.6°) and American Shoulder and Elbow Surgeons score (61.5 ± 5.3) being less than reported patient acceptable symptomatic state (110° and 76, respectively). Conclusions Both ARCR and RSA showed promising outcomes in terms of weight-bearing on the operated arm and subjective satisfaction at short- and midterm follow-up. Therefore, neither of these surgeries should be considered contraindicated for patients with weight-bearing shoulder conditions.

Background: This study aimed to report the short- and midterm outcomes of arthroscopic rotator cuff repair (ARCR) and reverse shoulder arthroplasty (RSA) in weight-bearing shoulders. Methods: This retrospective multicenter study included 19 cases of ARCR and 10 cases of RSA performed in weight-bearing shoulders from 2009 to 2021. In the ARCR group, postoperative 6-month magnetic resonance imaging confirmed the tendon integrity. In the RSA group, scapular notching, acromial fracture, and implant failure were assessed using plain radiographs, and complications were recorded. In both groups, preoperative and postoperative range of motion and functional scores were documented, along with subjective satisfaction and arm use for weight-bearing on the shoulders. For patients followed up for > 5 years, a midterm analysis was performed. Results: The ARCR group included 8 men and 11 women (average age, 58.8 ± 8.0 years). Initially, Patte types 1, 2, and 3 were noted in 9, 8, and 2 patients, respectively, and 4 patients exhibited full-thickness subscapularis tears. Four patients showed supraspinatus retear, and 2 patients showed subscapularis retear. Retear of any rotator cuff was observed in 5 patients (26.3%). Twelve patients were followed up for > 5 years; 11 (91.7%) used their operated arm for weight-bearing and 9 (75.0%) were satisfied. The RSA group included 5 men and 5 women (average age, 74.3 ± 7.9 years). Procedures included RSAs for cuff tear arthropathy (n = 6), osteoarthritis (n = 3), and fracture nonunion (n = 1). No cases of dislocation, prosthesis loosening, or disassociation were observed throughout the follow-up. However, 1 patient required implant removal due to infection, and 4 patients showed stage 1 scapular notching. Five patients were followed up for > 5 years, all of whom expressed satisfaction and used their operated arms for weight-bearing, despite mean forward flexion (107.5° ± 12.6°) and American Shoulder and Elbow Surgeons score (61.5 ± 5.3) being less than reported patient acceptable symptomatic state (110° and 76, respectively). Conclusions Both ARCR and RSA showed promising outcomes in terms of weight-bearing on the operated arm and subjective satisfaction at short- and midterm follow-up. Therefore, neither of these surgeries should be considered contraindicated for patients with weight-bearing shoulder conditions.

Background: This study aimed to report the short- and midterm outcomes of arthroscopic rotator cuff repair (ARCR) and reverse shoulder arthroplasty (RSA) in weight-bearing shoulders. Methods: This retrospective multicenter study included 19 cases of ARCR and 10 cases of RSA performed in weight-bearing shoulders from 2009 to 2021. In the ARCR group, postoperative 6-month magnetic resonance imaging confirmed the tendon integrity. In the RSA group, scapular notching, acromial fracture, and implant failure were assessed using plain radiographs, and complications were recorded. In both groups, preoperative and postoperative range of motion and functional scores were documented, along with subjective satisfaction and arm use for weight-bearing on the shoulders. For patients followed up for > 5 years, a midterm analysis was performed. Results: The ARCR group included 8 men and 11 women (average age, 58.8 ± 8.0 years). Initially, Patte types 1, 2, and 3 were noted in 9, 8, and 2 patients, respectively, and 4 patients exhibited full-thickness subscapularis tears. Four patients showed supraspinatus retear, and 2 patients showed subscapularis retear. Retear of any rotator cuff was observed in 5 patients (26.3%). Twelve patients were followed up for > 5 years; 11 (91.7%) used their operated arm for weight-bearing and 9 (75.0%) were satisfied. The RSA group included 5 men and 5 women (average age, 74.3 ± 7.9 years). Procedures included RSAs for cuff tear arthropathy (n = 6), osteoarthritis (n = 3), and fracture nonunion (n = 1). No cases of dislocation, prosthesis loosening, or disassociation were observed throughout the follow-up. However, 1 patient required implant removal due to infection, and 4 patients showed stage 1 scapular notching. Five patients were followed up for > 5 years, all of whom expressed satisfaction and used their operated arms for weight-bearing, despite mean forward flexion (107.5° ± 12.6°) and American Shoulder and Elbow Surgeons score (61.5 ± 5.3) being less than reported patient acceptable symptomatic state (110° and 76, respectively). Conclusions Both ARCR and RSA showed promising outcomes in terms of weight-bearing on the operated arm and subjective satisfaction at short- and midterm follow-up. Therefore, neither of these surgeries should be considered contraindicated for patients with weight-bearing shoulder conditions.

Background: This study aimed to report the short- and midterm outcomes of arthroscopic rotator cuff repair (ARCR) and reverse shoulder arthroplasty (RSA) in weight-bearing shoulders. Methods: This retrospective multicenter study included 19 cases of ARCR and 10 cases of RSA performed in weight-bearing shoulders from 2009 to 2021. In the ARCR group, postoperative 6-month magnetic resonance imaging confirmed the tendon integrity. In the RSA group, scapular notching, acromial fracture, and implant failure were assessed using plain radiographs, and complications were recorded. In both groups, preoperative and postoperative range of motion and functional scores were documented, along with subjective satisfaction and arm use for weight-bearing on the shoulders. For patients followed up for > 5 years, a midterm analysis was performed. Results: The ARCR group included 8 men and 11 women (average age, 58.8 ± 8.0 years). Initially, Patte types 1, 2, and 3 were noted in 9, 8, and 2 patients, respectively, and 4 patients exhibited full-thickness subscapularis tears. Four patients showed supraspinatus retear, and 2 patients showed subscapularis retear. Retear of any rotator cuff was observed in 5 patients (26.3%). Twelve patients were followed up for > 5 years; 11 (91.7%) used their operated arm for weight-bearing and 9 (75.0%) were satisfied. The RSA group included 5 men and 5 women (average age, 74.3 ± 7.9 years). Procedures included RSAs for cuff tear arthropathy (n = 6), osteoarthritis (n = 3), and fracture nonunion (n = 1). No cases of dislocation, prosthesis loosening, or disassociation were observed throughout the follow-up. However, 1 patient required implant removal due to infection, and 4 patients showed stage 1 scapular notching. Five patients were followed up for > 5 years, all of whom expressed satisfaction and used their operated arms for weight-bearing, despite mean forward flexion (107.5° ± 12.6°) and American Shoulder and Elbow Surgeons score (61.5 ± 5.3) being less than reported patient acceptable symptomatic state (110° and 76, respectively). Conclusions Both ARCR and RSA showed promising outcomes in terms of weight-bearing on the operated arm and subjective satisfaction at short- and midterm follow-up. Therefore, neither of these surgeries should be considered contraindicated for patients with weight-bearing shoulder conditions.

Objective: Primary frozen shoulder causes significant pain and progressively restricts shoulder movements. Diagnosis is made clinically based on patient history and physical examination. Management is mainly non-invasive owing to its self-limiting clinical course. However, clinical practice guidelines for frozen shoulder have not yet been developed in Korea. The developed guidelines aim to provide evidence-based recommendations for the diagnosis and treatment of frozen shoulder. Methods: A guideline development committee reviewed the literature from four databases (PubMed, Embase, Cochrane Library, and KMbase). Using the Population, Intervention, Comparator, and Outcome (PICO) framework, the committee formulated two backgrounds and 16 key questions to address common clinical concerns. Recommendations were made using the Grading of Recommendations, Assessment, Development, and Evaluation framework. Results: Diabetes, thyroid disease, and dyslipidemia significantly increase the risk of developing a frozen shoulder. Although frozen shoulder is often self-limiting, some patients may experience long-term functional disabilities. Ultrasound and magnetic resonance imaging should be used as adjunctive tools alongside clinical diagnosis, and rather than as independent diagnostic methods. Noninvasive approaches, such as medications, physical modalities, exercises, electrical stimulation, and manual therapy, may reduce pain and improve shoulder function. Other noninvasive interventions have limited evidence, and their application should be based on clinical judgment. Intra-articular steroid injections are recommended for treatment, and physiotherapy or hydrodilation with steroid injections can also be beneficial. Conclusion These guidelines provide evidence-based recommendations for diagnosing and treating primary frozen shoulder.

Objectives: This study investigated the impacts of exercise on irisin and fibroblast growth factor 21 (FGF-21) expression, as well as triiodothyronine (T3) and free fatty acid (FFA) levels in elderly women. Methods: Thirty women aged 65 to 70 years (10 per group) were randomly assigned to aquatic exercise, land exercise, and control groups. The aquatic and land groups engaged in 3 exercise sessions per week (60 min/session) for 16 weeks. The intensity was progressively increased every 4 weeks. Results: Irisin and FGF-21 levels significantly increased in the aquatic exercise group. In the post-test, the aquatic exercise group had the highest irisin levels. Significant findings were observed for irisin and FGF-21 for the main effect between aquatic and band exercise groups (p<0.05 for both), the main effect between measurement times (p<0.01 and p<0.001, respectively), and the interaction effect (p<0.05 and p<0.001, respectively). The irisin level was significantly higher in the aquatic than in the land group 30 minutes after the last session (p<0.05). In both exercise groups, T3 levels were significantly higher 30 minutes after the final session (p<0.05) than before the program. The FFA level was significantly higher in the aquatic exercise group than the others. In the aquatic group, FFA levels were significantly higher 30 minutes after both the first (p<0.01) and the last (p<0.001) session compared to pre-program values. Conclusion Differences in exercise type and environment can promote fat metabolism by stimulating hormonal changes that induce brown fat activity and browning.

PURPOSE: This study aimed to evaluate the effect of pretreatment of three different universal adhesives (Single Bond Universal [SBU], All-Bond Universal [ABU], and Prime&Bond universal [PBU]) on the bonding durability of an adhesive (Panavia F 2.0, PF) and a conventional (Duo-Link, DL) resin cements to air-abraded zirconia. MATERIALS AND METHODS: Rectangular-shaped zirconia specimens were prepared. The chemical composition and surface energy parameters of the materials were studied by Fourier transform infrared spectroscopy and contact angle measurement, respectively. To evaluate resin bonding to the zirconia, all the bonding specimens were immersed in water for 24 h and the specimens to be aged were additionally thermocycled 10000 times before the shear bond strength (SBS) test. RESULTS: The materials showed different surface energy parameters, including the degree of hydrophilicity/hydrophobicity. While the DL/CON (no pretreatment) showed the lowest SBS and a significant decrease in the value after thermocycling (P < .001), the PF/CON obtained a higher SBS value than the DL/CON (P < .001) and no decrease even after thermocycling (P = .839). When the universal adhesives were used with DL, their SBS values were higher than the CON (P < .05), but the trend was adhesive-specific. In conjunction with PF, the PF/SBU produced the highest SBS followed by the PF/ABU (P = .002), showing no significant decrease after thermocycling (P > .05). The initial SBS of the PF/PBU was similar to the PF/CON (P = .999), but the value decreased after thermocycling (P < .001). CONCLUSION The universal adhesive pretreatment did not necessarily show a synergistic effect on the bonding performance of an adhesive resin cement, whereas the pretreatment was beneficial to bond strength and durability of a conventional resin cement.

Background: The application of artificial intelligence and large language models in the medical field requires an evaluation of their accuracy in providing medical information. This study aimed to assess the performance of Chat Generative Pre-trained Transformer (ChatGPT) models 3.5 and 4 in solving orthopedic board-style questions. Methods: A total of 160 text-only questions from the Orthopedic Surgery Department at Seoul National University Hospital, conforming to the format of the Korean Orthopedic Association board certification examinations, were input into the ChatGPT 3.5 and ChatGPT 4 programs. The questions were divided into 11 subcategories. The accuracy rates of the initial answers provided by Chat GPT 3.5 and ChatGPT 4 were analyzed. In addition, inconsistency rates of answers were evaluated by regenerating the responses. Results: ChatGPT 3.5 answered 37.5% of the questions correctly, while ChatGPT 4 showed an accuracy rate of 60.0% (p < 0.001). ChatGPT 4 demonstrated superior performance across most subcategories, except for the tumor-related questions. The rates of inconsistency in answers were 47.5% for ChatGPT 3.5 and 9.4% for ChatGPT 4. Conclusions ChatGPT 4 showed the ability to pass orthopedic board-style examinations, outperforming ChatGPT 3.5 in accuracy rate. However, inconsistencies in response generation and instances of incorrect answers with misleading explanations require caution when applying ChatGPT in clinical settings or for educational purposes.

Background: Patient-reported satisfaction following total knee arthroplasty (TKA) can be affected by various factors. This study aimed to assess patient satisfaction rates and identify factors related to patients, surgery, and postoperative knee motion associated with satisfaction in posterior-stabilized TKA among Asian patients. Methods: A retrospective cross-sectional study was conducted in patients with primary osteoarthritis who underwent TKA and had a follow-up period of over 2 years. Patient satisfaction was measured using a 5-point Likert scale, and the patients were divided into satisfied and dissatisfied groups. The factors potentially affecting satisfaction were collected, including demographics, comorbidities, surgical options, and knee motion. Univariate and multivariate regression analyses were performed. Results: Of the 858 patients included, 784 (91.4%) were satisfied and 74 (8.6%) were dissatisfied. Fixed-bearing implants and higher postoperative knee flexion angles were associated with satisfaction (odds ratio [OR], 2.366; p = 0.001 and OR, 1.045; p < 0.001, respectively), whereas cerebrovascular disease was related to dissatisfaction (OR, 0.403; p = 0.005). The regression model demonstrated moderate predictability (R2 = 0.112). Conclusions Fixed-bearing implants and higher postoperative knee flexion angles were associated with patient satisfaction following TKA, whereas cerebrovascular disease was associated with dissatisfaction. The identification of these factors could help improve surgical outcomes and patient satisfaction following TKA.