ObjectiveTo evaluate the therapeutic effect and mechanism of tendon-management and patella-movement therapeutic manipulation in the treatment of patellofemoral arthritis based on imaging evaluation. MethodsTotally 126 patients with patellofemoral arthritis were recruited and divided into a treatment group and a control group according to a randomised numerical table. The control group received routine sodium hyaluronate injection once a week for a total of 5 times； the treatment group received tendon-management and patella-movement therapeutic manipulation three times a week for four weeks. We compared the Western Ontario and McMaster University osteoarthritis index score （WOMAC）， visual analogue scale （VAS）， imaging indicators including patellar external displacement distance， patellofemoral fit angle， lateral patellofemoral angle， and patellofemoral index， and overall effectiveness evaluation between the two groups before and one week after treatment. ResultsThe total effective rate of the treatment group （45/54， 83.33%） was significantly higher than that of the control group （36/54， 66.67%，P＜0.05）. One week after the end of treatment， the VAS scores and WOMAC scores of both groups were lower than those before treatment in the same group （P＜0.01）， and the patellofemoral index and patellofemoral fit angle of the treatment group decreased compared with that of the control group （P＜0.05）. Compared with the pre-treatment， the distance of patellar external displacement， patellofemoral index， and patellofemoral fit angle decreased in the treatment group 1 week after the end of treatment， and the patellofemoral fit angle decreased in the control group （P＜0.05）. ConclusionThe therapeutic manipulation of tendon-management and patella-movement can correct the degree of patellar external displacement， alleviate joint pain symptoms， improve joint function， and achieve the goal of treating patellofemoral arthritis.

Since the promulgation of the first Drug Administration Law of the People's Republic of China 40 years ago in 1984, China has undergone four main stages in the traditional Chinese medicine(TCM) regulation: the initial establishment of TCM regulation rules(1984-1997), the formation of a modern TCM regulatory system(1998-2014), the reform of the review and approval system for new TCM drugs(2015-2018), and the construction of a scientific regulation system for TCM(2019-2024). Over the past five years, a series of milestone achievements of TCM regulation in China have been achieved in the six aspects, including its strategic objectives and the establishment of a science-based regulatory system, the reform of the review and approval system for new TCM drugs, the optimization and improvement of the TCM standard system and its formation mechanism, comprehensive enhancement of regulatory capabilities for TCM safety, international harmonization of TCM regulation and its role in promoting innovation. Looking ahead, centered on advancing TCMRS to establish a sound regulatory framework tailored to the unique characteristics of TCM, TCM regulation will evolve into new reform patterns, advancing and extending across eight critical fronts, including the legal framework and policy architecture, the review and approval system for new TCM drugs, the quality standard and management system of TCM, the comprehensive quality & safety regulation and traceability system, the research and transformation system for TCMRS, AI-driven innovations in TCM regulation, the coordination between high-quality industrial development and high-level regulation, and the leadership in international cooperation and regulatory harmonization. In this way, a unique path for the development of modern TCM regulation with Chinese characteristics will be pioneered.
Humans ; China ; Drugs, Chinese Herbal/standards* ; History, 20th Century ; History, 21st Century ; Medicine, Chinese Traditional/trends*

OBJECTIVE: To explore the application value and clinical effect of 3D printing combined with customized bone plate in the treatment of acetabular fracture. METHODS: From June 2020 to June 2022, 11 patients with acetabular fractures underwent preoperative planning using 3D printing technology and were treated with customized bone plates including 8 males and 3 females, aged 25 to 66 years old. The fractures were classified according to Letournel-Judet:4 posterior wall fractures, 2 T-type fractures, 2 transverse posterior wall fractures, 2 double column fractures, and 1 anterior column with posterior semi-transverse fractures. The operative time, intraoperative blood loss, intraoperative fluoroscopy times, postoperative drainage volume, postoperative fracture healing time, and hip function score were recorded and analyzed. RESULTS: The operation time of 11 patients was 80 to 150 min, intraoperative blood volume was 150 to 700 ml, fluoroscopy frequency was 2 to 6, postoperative drainage flow was 60 to 195 ml, and the fracture healing time was 2.5 to 6.0 months. Fracture reduction was evaluated according to Matta score:anatomical reduction in 3 cases and satisfactory reduction in 8 cases. Eleven patients were followed up for 7 to 18 months. The hip Merle d'Aubigne function scores were excellent in 6 cases, good in 3 cases, fair in 1 case and poor in 1 case. Incision fat liquefaction occurred in 1 case and obturator nerve traction in 1 case. CONCLUSION The application of 3D printing technology combined with customized bone plates in the treatment of acetabular fracture is effective. In addition, the printed model can provide the operator with the results of the three-dimensional shape of the fracture, which is convenient for surgical reduction and effectively improves the efficiency of surgery.
Humans ; Female ; Male ; Middle Aged ; Acetabulum/surgery* ; Printing, Three-Dimensional ; Adult ; Aged ; Bone Plates ; Fractures, Bone/surgery* ; Fracture Fixation, Internal/methods*

OBJECTIVE: To analyze the positive rate and distribution of anti-M unexpected antibody in pediatric inpatients aged 0 to 14 years in central China. METHODS: A total of 30 049 pediatric inpatients admitted to the Second Xiangya Hospital of Central South University, Wuhan Children's Hospital and Children's Hospital Affiliated of Zhengzhou University from May 2020 to August 2022 were enrolled in this study, and relevant clinical data were collected. Blood samples from the patients were tested for blood typing and screened for unexpected antibodies. For samples that screened positive for unexpected antibodies, identification was conducted using the identification panel to determine the specificity of the antibodies. The distribution and differences of anti-M antibodies in pediatric patients of different sexes, ages, blood groups, disease types, with or without a history of blood transfusion, and across different regions were analyzed. RESULTS: Among 30 049 inpatients, the positive rate of unexpected antibodies was 0.91% (273/30 049), of which the positive rate of anti-M antibodies was 0.44% (131/30 049). The positive rate of anti-M antibodies in the neonates aged 0 to < 1 month was 0.10% (5/4 881), and all of them were IgG antibodies from their mothers; The positive rate of anti-M antibodies for the group aged from 1 month to < 1 year old was 0.23% (7/3 108), with no anti-M antibodies detected in patients aged 1-6 months; The positive rates of anti-M antibodies in the 1-4 years old group, 5-9 years old group, and 10-14 years old group were 0.87% (88/10 064), 0.38% (27/7 190), and 0.08% (4/4 806), respectively. The positive rate of anti-M antibodies in the 1-4 years old group was significantly higher than that of the other groups ( P <0.001), and there were also statistical differences in the positive rate between the 5-9 years old group and the 0-< 1 month and 10-14 years old groups ( P <0.001). The prevalences of anti-M antibodies in ABO blood group A, B, O and AB were 0.32% (30/9 482), 0.70% (58/8 293), 0.32% (31/9 595) and 0.45% (12/2 679), respectively. The prevalence of anti-M antibodies in patients with blood group B was significantly higher than that in patients with blood groups A and O ( P <0.05). The prevalences of anti-M antibodies in Hunan, Hubei and Henan was 0.18%, 0.32% and 0.71%, respectively. The prevalence of anti-M antibodies in Henan was significantly higher than that in Hunan and Hubei ( P <0.05), and the distribution showed obvious regional differences between the north and the south. There were no significant differences in the positive rate of anti-M antibodies between the children with different sexes, disease types, and with or without a history of blood transfusion (P >0.05). CONCLUSION This study reveals the distribution pattern of anti-M antibodies in pediatric inpatients aged 0-14 years in central China, which has reference value for the research on unexpected red blood cell antibodies in Chinese children.
Humans ; Child ; China ; Infant ; Child, Preschool ; Adolescent ; Female ; Male ; Inpatients ; Infant, Newborn ; Blood Grouping and Crossmatching ; Antibodies/blood*

OBJECTIVE: To establish a three-dimensional finite element model of a digital wire loop space maintainer for the mandible and primary tooth loss, in order to investigate the stress, deformation, and shear force experienced by patients with the loss of the second primary molar when wearing the wire loop space maintainer. METHODS: Cone beam computed tomography (CBCT) scans were performed on the patients to create a digital model of the mandible with the absence of the second primary molar using Mimics 21.0 software. A digital model integrating the crown's retention and the wire loop structure of the full crown and ring wire loop space maintainer was constructed using pediatric space maintainer design software, utilizing three different materials: cobalt-chromium alloy, polyether ether ketone (PEEK), and titanium alloy. In ANSYS Work Beach 2023 R2 software, vertical loads of 70 N, tilted 45° along the long axis of the tooth loads of 70 N, and a 10 N load on the surface of the wire loop were applied to the occlusal surfaces of models 46 and 84, simulating centric and lateral occlusions during chewing with the wire loop space maintainer in place. The stress states of the wire loop space maintainer and supporting teeth were analyzed. RESULTS: Under various loading conditions, the maximum principal stress of the ring wire loop space maintainer was significantly lower than that of the full crown. Stress contour maps indicated that the peak of the maximum principal stress occurred at the junction of the wire loop and crown structure, indicating that this area was more susceptible to fracture. The ring wire loop space maintainer made from PEEK material exhibited the lowest maximum shear stress on the internal organizational surfaces, with equivalent stresses of 23.18 MPa and 36.35 MPa for models 46 and 84, respectively. Stress contour maps demonstrated that the maximum stress on tooth 46 was located at its mesial, while the maximum stress on tooth 84 was situated near the root area on its distal, in contact with the wire loop space maintainer. CONCLUSION In cases of second primary molar loss, wearing the digital ring wire loop space maintainer can effectively distribute stress, and the ring wire loop space maintainer made from PEEK material reduces the stress experienced by supporting teeth to some extent, demonstrating its superiority in clinical application.
Finite Element Analysis ; Humans ; Tooth, Deciduous ; Cone-Beam Computed Tomography ; Space Maintenance, Orthodontic/methods* ; Imaging, Three-Dimensional ; Orthodontic Wires ; Dental Stress Analysis ; Mandible ; Stress, Mechanical

BACKGROUND: Non-invasive computed tomography angiography (CTA)-based fractional flow reserve (CT-FFR) could become a gatekeeper to invasive coronary angiography. Deep learning (DL)-based CT-FFR has shown promise when compared to invasive FFR. To evaluate the performance of a DL-based CT-FFR technique, DeepVessel FFR (DVFFR). METHODS: This retrospective study was designed for iScheMia Assessment based on a Retrospective, single-center Trial of CT-FFR (SMART). Patients suspected of stable coronary artery disease (CAD) and undergoing both CTA and invasive FFR examinations were consecutively selected from the Beijing Anzhen Hospital between January 1, 2016 to December 30, 2018. FFR obtained during invasive coronary angiography was used as the reference standard. DVFFR was calculated blindly using a DL-based CT-FFR approach that utilized the complete tree structure of the coronary arteries. RESULTS: Three hundred and thirty nine patients (60.5 ±10.0 years and 209 men) and 414 vessels with direct invasive FFR were included in the analysis. At per-vessel level, sensitivity, specificity, accuracy, positive predictive value (PPV) and negative predictive value (NPV) of DVFFR were 94.7%, 88.6%, 90.8%, 82.7%, and 96.7%, respectively. The area under the receiver operating characteristics curve (AUC) was 0.95 for DVFFR and 0.56 for CTA-based assessment with a significant difference (P < 0.0001). At patient level, sensitivity, specificity, accuracy, PPV and NPV of DVFFR were 93.8%, 88.0%, 90.3%, 83.0%, and 95.8%, respectively. The computation for DVFFR was fast with the average time of 22.5 ± 1.9 s. CONCLUSIONS The results demonstrate that DVFFR was able to evaluate lesion hemodynamic significance accurately and effectively with improved diagnostic performance over CTA alone. Coronary artery disease (CAD) is a critical disease in which coronary artery luminal narrowing may result in myocardial ischemia. Early and effective assessment of myocardial ischemia is essential for optimal treatment planning so as to improve the quality of life and reduce medical costs.

OBJECTIVE: To evaluate the efficacy and safety of Shexiang Tongxin Dropping Pill (STDP) in treating stable angina patients with phlegm-heat and blood-stasis syndrome by exercise duration and metabolic equivalents. METHODS: This multicenter, randomized, double-blind, placebo-controlled clinical trial enrolled stable angina patients with phlegm-heat and blood-stasis syndrome from 22 hospitals. They were randomized 1:1 to STDP (35 mg/pill, 6 pills per day) or placebo for 56 days. The primary outcome was the exercise duration and metabolic equivalents (METs) assessed by the standard Bruce exercise treadmill test after 56 days of treatment. The secondary outcomes included the total angina symptom score, Chinese medicine (CM) symptom scores, Seattle Angina Questionnaire (SAQ) scores, changes in ST-T on electrocardiogram and adverse events (AEs). RESULTS: This trial enrolled 309 patients, including 155 and 154 in the STDP and placebo groups, respectively. STDP significantly prolonged exercise duration with an increase of 51.0 s, compared to a decrease of 12.0 s with placebo (change rate: -11.1% vs. 3.2%, P<0.01). The increase in METs was significantly greater in the STDP group than in the placebo group (change: -0.4 vs. 0.0, change rate: -5.0% vs. 0.0%, P<0.01). The improvement of total angina symptom scores (25.0% vs. 0.0%), CM symptom scores (38.7% vs. 11.8%), reduction of nitroglycerin consumption (100.0% vs. 11.3%), and all domains of SAQ, were significantly greater with STDP than placebo (all P<0.01). The changes in Q-T intervals at 28 and 56 days from baseline were similar between the two groups (both P>0.05). Twenty-five participants (16.3%) with STDP and 16 (10.5%) with placebo experienced AEs (P=0.131), with no serious AEs observed. CONCLUSION STDP could improve exercise tolerance in patients with stable angina and phlegm-heat and blood stasis syndrome, with a favorable safety profile. (Registration No. ChiCTR-IPR-15006020).
Humans ; Double-Blind Method ; Drugs, Chinese Herbal/adverse effects* ; Male ; Female ; Middle Aged ; Angina, Stable/physiopathology* ; Aged ; Syndrome ; Treatment Outcome ; Placebos ; Tablets

Diabetic cardiomyopathy (DCM) is a medical condition characterized by cardiac remodeling and dysfunction in individuals with diabetes mellitus. Sarcoplasmic reticulum (SR) and mitochondrial Ca²⁺ overload in cardiomyocytes have been recognized as biological hallmarks in DCM; however, the specific factors underlying these abnormalities remain largely unknown. In this study, we aimed to investigate the role of a cardiac-specific long noncoding RNA, D830005E20Rik (Trdn-as), in DCM. Our results revealed the remarkably upregulation of Trdn-as in the hearts of the DCM mice and cardiomyocytes treated with high glucose (HG). Knocking down Trdn-as in cardiac tissues significantly improved cardiac dysfunction and remodeling in the DCM mice. Conversely, Trdn-as overexpression resulted in cardiac damage resembling that observed in the DCM mice. At the cellular level, Trdn-as induced Ca²⁺ overload in the SR and mitochondria, leading to mitochondrial dysfunction. RNA-seq and bioinformatics analyses identified calsequestrin 2 (Casq2), a primary calcium-binding protein in the junctional SR, as a potential target of Trdn-as. Further investigations revealed that Trdn-as facilitated the recruitment of METTL14 to the Casq2 mRNA, thereby enhancing the m⁶A modification of Casq2. This modification increased the stability of Casq2 mRNA and subsequently led to increased protein expression. When Casq2 was knocked down, the promoting effects of Trdn-as on Ca²⁺ overload and mitochondrial damage were mitigated. These findings provide valuable insights into the pathogenesis of DCM and suggest Trdn-as as a potential therapeutic target for this condition.
Animals ; Diabetic Cardiomyopathies/pathology* ; RNA, Long Noncoding/genetics* ; Myocytes, Cardiac/metabolism* ; Mice ; Calsequestrin/genetics* ; Calcium/metabolism* ; Male ; Sarcoplasmic Reticulum/metabolism* ; Methyltransferases/metabolism* ; Mice, Inbred C57BL ; Mitochondria, Heart/metabolism* ; Disease Models, Animal ; Mitochondria/metabolism*

OBJECTIVE: Gastric cancer (GC) is one of the most common malignancies seen in clinic and requires novel treatment options. Morin is a natural flavonoid extracted from the flower stalk of a highly valuable medicinal plant Prunella vulgaris L., which exhibits an anti-cancer effect in multiple types of tumors. However, the therapeutic effect and underlying mechanism of morin in treating GC remains elusive. The study aims to explore the therapeutic effect and underlying molecular mechanisms of morin in GC. METHODS: For in vitro experiments, the proliferation inhibition of morin was measured by cell counting kit-8 assay and colony formation assay in human GC cell line MKN45, human gastric adenocarcinoma cell line AGS, and human gastric epithelial cell line GES-1; for apoptosis analysis, microscopic photography, Western blotting, ubiquitination analysis, quantitative polymerase chain reaction analysis, flow cytometry, and RNA interference technology were employed. For in vivo studies, immunohistochemistry, biomedical analysis, and Western blotting were used to assess the efficacy and safety of morin in a xenograft mouse model of GC. RESULTS: Morin significantly inhibited the proliferation of GC cells MKN45 and AGS in a dose- and time-dependent manner, but did not inhibit human gastric epithelial cells GES-1. Only the caspase inhibitor Z-VAD-FMK was able to significantly reverse the inhibition of proliferation by morin in both GC cells, suggesting that apoptosis was the main type of cell death during the treatment. Morin induced intrinsic apoptosis in a dose-dependent manner in GC cells, which mainly relied on B cell leukemia/lymphoma 2 (BCL-2) associated agonist of cell death (BAD) but not phorbol-12-myristate-13-acetate-induced protein 1. The upregulation of BAD by morin was due to blocking the ubiquitination degradation of BAD, rather than the transcription regulation and the phosphorylation of BAD. Furthermore, the combination of morin and BCL-2 inhibitor navitoclax (also known as ABT-737) produced a synergistic inhibitory effect in GC cells through amplifying apoptotic signals. In addition, morin treatment significantly suppressed the growth of GC in vivo by upregulating BAD and the subsequent activation of its downstream apoptosis pathway. CONCLUSION Morin suppressed GC by inducing apoptosis, which was mainly due to blocking the ubiquitination-based degradation of the pro-apoptotic protein BAD. The combination of morin and the BCL-2 inhibitor ABT-737 synergistically amplified apoptotic signals in GC cells, which may overcome the drug resistance of the BCL-2 inhibitor. These findings indicated that morin was a potent and promising agent for GC treatment. Please cite this article as: Wang Y, Sun XY, Ma FQ, Ren MM, Zhao RH, Qin MM, Zhu XH, Xu Y, Cao ND, Chen YY, Dong TG, Pan YF, Zhao AG. Morin inhibits ubiquitination degradation of BCL-2 associated agonist of cell death and synergizes with BCL-2 inhibitor in gastric cancer cells. J Integr Med. 2025; 23(3): 320-332.
Humans ; Flavonoids/therapeutic use* ; Stomach Neoplasms/pathology* ; Animals ; Proto-Oncogene Proteins c-bcl-2/metabolism* ; Cell Line, Tumor ; Apoptosis/drug effects* ; Cell Proliferation/drug effects* ; Ubiquitination/drug effects* ; Mice ; Drug Synergism ; Mice, Inbred BALB C ; Mice, Nude ; Xenograft Model Antitumor Assays ; Flavones