Electroencephalogram (EEG) is a non-invasive, high temporal-resolution technique for monitoring brain activity. However, affected by the volume conduction effect, EEG has a low spatial resolution and is difficult to locate brain neuronal activity precisely. The surface Laplacian (SL) technique obtains the Laplacian EEG (LEEG) by estimating the second-order spatial derivative of the scalp potential. LEEG can reflect the radial current activity under the scalp, with positive values indicating current flow from the brain to the scalp (“source”) and negative values indicating current flow from the scalp to the brain (“sink”). It attenuates signals from volume conduction, effectively improving the spatial resolution of EEG, and is expected to contribute to breakthroughs in neural engineering. This paper provides a systematic overview of the principles and development of SL technology. Currently, there are two implementation paths for SL technology: current source density algorithms (CSD) and concentric ring electrodes (CRE). CSD performs the Laplace transform of the EEG signals acquired by conventional disc electrodes to indirectly estimate the LEEG. It can be mainly classified into local methods, global methods, and realistic Laplacian methods. The global method is the most commonly used approach in CSD, which can achieve more accurate estimation compared with the local method, and it does not require additional imaging equipment compared with the realistic Laplacian method. CRE employs new concentric ring electrodes instead of the traditional disc electrodes, and measures the LEEG directly by differential acquisition of the multi-ring signals. Depending on the structure, it can be divided into bipolar CRE, quasi-bipolar CRE, tripolar CRE, and multi-pole CRE. The tripolar CRE is widely used due to its optimal detection performance. While ensuring the quality of signal acquisition, the complexity of its preamplifier is relatively acceptable. Here, this paper introduces the study of the SL technique in resting rhythms, visual-related potentials, movement-related potentials, and sensorimotor rhythms. These studies demonstrate that SL technology can improve signal quality and enhance signal characteristics, confirming its potential applications in neuroscientific research, disease diagnosis, visual pathway detection, and brain-computer interfaces. CSD is frequently utilized in applications such as neuroscientific research and disease detection, where high-precision estimation of LEEG is required. And CRE tends to be used in brain-computer interfaces, that have stringent requirements for real-time data processing. Finally, this paper summarizes the strengths and weaknesses of SL technology and envisages its future development. SL technology boasts advantages such as reference independence, high spatial resolution, high temporal resolution, enhanced source connectivity analysis, and noise suppression. However, it also has shortcomings that can be further improved. Theoretically, simulation experiments should be conducted to investigate the theoretical characteristics of SL technology. For CSD methods, the algorithm needs to be optimized to improve the precision of LEEG estimation, reduce dependence on the number of channels, and decrease computational complexity and time consumption. For CRE methods, the electrodes need to be designed with appropriate structures and sizes, and the low-noise, high common-mode rejection ratio preamplifier should be developed. We hope that this paper can promote the in-depth research and wide application of SL technology.

A molecularly imprinted electrochemical sensor for rapid detection of tenuazonic acid(TeA)was developed based on the Au-MoS2/MOF(Fe2+/Fe3+)high-efficiency catalytic cycle amplification strategy,using p-aminobenzoic acid(PABA)as the functional monomer,and TeA as the template molecule.The molecularly imprinted polymer(MIP)was prepared on the surface of Au-MoS2/MOF(Fe2+/Fe3+)modified electrode through electropolymerization.By introducing flower-like MoS2 nanoflakes(MoS2 NFs)as a co-catalyst into a mixed-valence structured Fe-MOF(Fe2+/Fe3+),the H2O2 electrochemical signal of the MIP/Au-MoS2/MOF(Fe2+/Fe3+)/GCE was significantly enhanced.Under optimal conditions,the sensor exhibited good selectivity and high sensitivity toward TeA.A linear relationship(R2=0.992)was observed between the electrochemical response and TeA concentration in the range of 0.001-10 μg/kg,with a detection limit of 0.3 ng/kg.The developed method was successfully applied to determination of TeA in fruit samples,with recoveries ranging from 90.8%to 110.8%,and relative standard deviations from 1.9%to 8.4%.

Postoperative infection of internal fixation of closed fractures the lower limbs in adults represents a devastating complication, characterized by diagnostic challenges, prolonged treatment duration and high disability rates. Current management of these infections faces multiple challenges, such as difficulties in early accurate diagnosis, and various controversies about the treatment plan, leading to poor overall diagnosis and treatment results. To address these issues, based on evidence-based medicine and principles with emphasis on scientific rigor, clinical applicability and innovation, the Trauma Branch of the Chinese Medical Association, Orthopedic Branch of the Chinese Medical Doctor Association, Orthopedics Branch of the Chinese Medical Association, and Trauma Orthopedics and Polytrauma Group of the Resuscitation and Emergency Committee of the Chinese Medical Doctor Association have collaboratively organized a panel of relevant experts to develop the Guideline for diagnosis and treatment of infection after internal fixation of closed lower limb fractures in adults ( version 2025). The guideline proposed 10 recommendations, aiming to provide a foundation for standardized diagnosis and treatment of postoperative infection in adults with closed lower limb fractures.

Sacroiliac complex injuries are commonly seen in high-energy pelvic fractures. The injuries make a big difference in treatment patterns due to the diverse injury types, posing considerable challenges in formulating optimal treatment strategies, and hence are persistent clinical difficulties in orthopedic trauma. The clinical management of sacroiliac complex injuries presents several key challenges such as a non-negligible rate of missed diagnoses in associated vascular and visceral injuries, absence of standardized protocols for surgical approaches and reduction-fixation strategies across different injury patterns, and ongoing controversies regarding surgical indications and optimal timing for patients combined with concomitant lumbosacral plexus injuries. Currently, no systematic clinical guidelines are available for the diagnosis and treatment of sacroiliac complex injuries both domestically and internationally. To this end, the Pelvic and Acetabular Surgery Group, Orthopedic Branch, China International Exchange and Promotive Association for Medical and Health Care and Orthopedic Physician Branch, Chinese Medical Doctor Association organized a panel of domestic experts in the field to develop the Clinical guideline for the diagnosis and treatment of sacroiliac complex injuries ( version 2025), based on evidence-based medicine and adhering to the principles of scientific rigor, clinical applicability, and innovation. These guidelines provided 11 recommendations covering diagnosis, therapeutic principles and techniques, management protocols for lumbosacral plexus injuries, outcome evaluation, and postoperative rehabilitation pathways, etc., aiming to standardize the clinical management of sacroiliac complex injuries.

BACKGROUND: Non-invasive computed tomography angiography (CTA)-based fractional flow reserve (CT-FFR) could become a gatekeeper to invasive coronary angiography. Deep learning (DL)-based CT-FFR has shown promise when compared to invasive FFR. To evaluate the performance of a DL-based CT-FFR technique, DeepVessel FFR (DVFFR). METHODS: This retrospective study was designed for iScheMia Assessment based on a Retrospective, single-center Trial of CT-FFR (SMART). Patients suspected of stable coronary artery disease (CAD) and undergoing both CTA and invasive FFR examinations were consecutively selected from the Beijing Anzhen Hospital between January 1, 2016 to December 30, 2018. FFR obtained during invasive coronary angiography was used as the reference standard. DVFFR was calculated blindly using a DL-based CT-FFR approach that utilized the complete tree structure of the coronary arteries. RESULTS: Three hundred and thirty nine patients (60.5 ±10.0 years and 209 men) and 414 vessels with direct invasive FFR were included in the analysis. At per-vessel level, sensitivity, specificity, accuracy, positive predictive value (PPV) and negative predictive value (NPV) of DVFFR were 94.7%, 88.6%, 90.8%, 82.7%, and 96.7%, respectively. The area under the receiver operating characteristics curve (AUC) was 0.95 for DVFFR and 0.56 for CTA-based assessment with a significant difference (P < 0.0001). At patient level, sensitivity, specificity, accuracy, PPV and NPV of DVFFR were 93.8%, 88.0%, 90.3%, 83.0%, and 95.8%, respectively. The computation for DVFFR was fast with the average time of 22.5 ± 1.9 s. CONCLUSIONS The results demonstrate that DVFFR was able to evaluate lesion hemodynamic significance accurately and effectively with improved diagnostic performance over CTA alone. Coronary artery disease (CAD) is a critical disease in which coronary artery luminal narrowing may result in myocardial ischemia. Early and effective assessment of myocardial ischemia is essential for optimal treatment planning so as to improve the quality of life and reduce medical costs.

Eightly-four novel thioheterocyclic nucleoside derivatives were designed, synthesized, and evaluated for antitumor activity in vitro and in vivo. Most of the compounds inhibited the growth of HCT116 and HeLa cancer cells in vitro, among them 33a and 36b exhibited potent activity against HCT116 cells (IC₅₀ = 0.27 and 0.49 μmol/L, respectively). Both compounds 33a and 36b inhibited cell metastasis, arrested the cell cycle in the G₂/M phase, and induced apoptosis in vitro. Mechanistic studies revealed that 33a and 36b increased ROS levels, led to DNA damage, ER stress, and mitochondrial dysfunction, and inhibited autophagy in HCT116 cells. Biological information analysis, RNA-sequencing, Gene Set Enrichment Analysis (GSEA), drug affinity responsive target stability (DARTS) assay, cellular thermal shift assay (CETSA), and SPR experiments identified that compounds 33a and 36b showed antitumor activity by suppressing the c-MYC pathway. c-MYC silencing assays indicated that c-MYC proteins participated in 33a-mediated anticancer activities in HCT116 cells. More importantly, compound 33a presented favorable pharmacokinetic properties in mice (T _1/2 = 6.8 h) and showed significant antitumor efficacy in vivo without obvious toxicity, showing promising potential for further clinical development.

OBJECTIVE: This study reports the first imported case of Lassa fever (LF) in China. Laboratory detection and molecular epidemiological analysis of the Lassa virus (LASV) from this case offer valuable insights for the prevention and control of LF. METHODS: Samples of cerebrospinal fluid (CSF), blood, urine, saliva, and environmental materials were collected from the patient and their close contacts for LASV nucleotide detection. Whole-genome sequencing was performed on positive samples to analyze the genetic characteristics of the virus. RESULTS: LASV was detected in the patient's CSF, blood, and urine, while all samples from close contacts and the environment tested negative. The virus belongs to the lineage IV strain and shares the highest homology with strains from Sierra Leone. The variability in the glycoprotein complex (GPC) among different strains ranged from 3.9% to 15.1%, higher than previously reported for the seven known lineages. Amino acid mutation analysis revealed multiple mutations within the GPC immunogenic epitopes, increasing strain diversity and potentially impacting immune response. CONCLUSION The case was confirmed through nucleotide detection, with no evidence of secondary transmission or viral spread. The LASV strain identified belongs to lineage IV, with broader GPC variability than previously reported. Mutations in the immune-related sites of GPC may affect immune responses, necessitating heightened vigilance regarding the virus.
Humans ; China/epidemiology* ; Genome, Viral ; Lassa Fever/virology* ; Lassa virus/classification* ; Molecular Epidemiology ; Phylogeny

OBJECTIVE: Recombination events are common and serve as the primary driving force of diverse human adenovirus (HAdV), particularly in children with acute respiratory tract infections (ARIs). Therefore, continual monitoring of these events is essential for effective viral surveillance and control. METHODS: Respiratory specimens were collected from children with ARIs between January 2022 and December 2023. The penton base, hexon, and fiber genes were amplified from HAdV-positive specimens and sequenced to determine the virus type. In cases with inconsistent typing results, genes were cloned into the pGEM-T vector to detect recombination events. Metagenomic next-generation sequencing (mNGS) was performed to characterize the recombinant HAdV genomes. RESULTS: Among 6,771 specimens, 277 (4.09%, 277/6,771) were positvie for HAdV, of which 157 (56.68%, 157/277) were successfully typed, with HAdV-B3 being the dominant type (91.08%, 143/157), and 14 (5.05%, 14/277) exhibited inconsistent typing results, six of which belonged to species B. The penton base genes of these six specimens were classified as HAdV-B7, whereas their hexon and fiber genes were classified as HAdV-B3, resulting in a recombinant genotype designated P7H3F3, which closely resembled HAdV-B114. Additionally, a partial gene encoding L1 52/55 kD was identified, which originated from HAdV-B16. CONCLUSION A novel recombinant, P7H3F3, was identified, containing sequences derived from HAdV-B3 and HAdV-B7, which is similar to HAdV-B114, along with additional sequences from HAdV-B16.
Humans ; Adenoviruses, Human/isolation & purification* ; Respiratory Tract Infections/epidemiology* ; Child, Preschool ; Child ; Recombination, Genetic ; Male ; Beijing/epidemiology* ; Infant ; Female ; Phylogeny ; Adenovirus Infections, Human/epidemiology* ; Acute Disease ; Genome, Viral

OBJECTIVE: To explore the effectiveness and feasibility of two osteotomy guides in medial open wedge high tibial osteotomy (MOWHTO). METHODS: Clinical data of 103 patients who underwent routine MOWHTO surgery between January 2020 and December 2022 were collected for retrospective analysis. The patients were divided into two groups based on the method of osteotomy guide plate. The control group of 51 patients received traditional osteotomy guide plate technique, including 17 males and 34 females, aged from 48 to 68 years old with an average of(57.93±4.82) years old, with a disease duration ranged from 1 to 8 years with an average of (4.89±1.49) years. The observation group of 52 patients received personalized osteotomy guide plate technique, including 23 males and 29 females, aged from 48 to 69 with an average of (58.22±5.10) years, with a disease duration ranged from 1 to 9 years with an average of(5.10±1.55) years. The perioperative indicators, complications, and knee joint recovery rate were statistically analyzed for both groups, as well as the preoperative and postoperative coagulation function, fibrinogen (FIB), D-dimer (D-D), gait parameters (step frequency, step length, step speed), biomechanical indicators, weight bearing line (WBL), medial proximal tibial angle (MPTA), joint line conergence angle (JLCA), and anterior cruciate ligament (ACL) function (body width, tibial anterior displacement). RESULTS: All patients were followed up for 6 months. The intraoperative blood loss, operation time, and number of fluoroscopic views in the observation group were (358.58±93.76) ml, (84.42±8.17) min, and (2.00±0.44) times, respectively, which were all less than those in the control group (465.55±105.38) ml, (96.53±10.51) min, and (6.31±0.58) times (P<0.05). Three days after surgery, the FIB and D-D levels in the observation group were (4.21±0.48) g·L^-1 and (204.47±35.59) μg·L^-1, respectively, which were both lower than those in the control group (5.56±0.57) g·L^-1 and (311.12±42.23) μg·L^-1 (P<0.05). Three months after surgery, the step frequency, step length, and step speed in the observation group were (1.89±0.23) steps·s^-1, (0.57±0.15) m, and (0.99±0.11) m·s^-1, respectively, which were all higher than those in the control group (1.80±0.18) steps·s^-1, (0.50±0.14) m, and (0.95±0.09) m·s^-1 (P<0.05). Three months after surgery, the WBL and MPTA in the observation group were (45.53±4.41)% and (87.03±8.15)°, respectively, which were both higher than those in the control group (38.38±4.36)% and (83.68±8.50)°, and the JLCA was (2.36±0.24)°, which was lower than that in the control group (2.61±0.33)° (P<0.05). The ACL body width during internal fixation removal was (5.60±0.51) mm, which was greater than that in the control group (5.08±0.56) mm, and the tibial migration was (5.70±0.42) mm, which was less than that in the control group (6.33±0.48) mm (P<0.05). There was no significant difference in the incidence of complications between the two groups (P>0.05). Six months after surgery, there was no significant difference in the recovery rate of knee joint between the two groups (P>0.05). CONCLUSION The application of personalized osteotomy guide technique in MOWHTO can help improve knee biomechanics and ACL function, and has less effect on coagulation function and no increase in complications.
Humans ; Male ; Female ; Osteotomy/methods* ; Middle Aged ; Tibia/physiopathology* ; Aged ; Biomechanical Phenomena ; Retrospective Studies ; Osteoarthritis, Knee/physiopathology*

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome