Objective To construct and evaluate a prognostic model for clear cell renal cell carcinoma(ccRCC)based on preoperative lipid ratios, cM0(i+)staging, and other clinical characteristics, so as to provide a precise tool for clinical prognosis assessment. Methods A retrospective analysis was conducted on the clinical data of 215 ccRCC patients treated in our hospital during May 2014 and May 2023. Lipid ratios were calculated using preoperative lipid data, and patients were divided into cM0(i+)stage or cM0 stage according to postoperative circulating tumor cells(CTCs)test results. The optimal lipid ratio and cutoff value were selected using receiver operating characteristic(ROC)curves and the X-tile method. Patients were subdivided into three groups based on the level of the low-density lipoprotein cholesterol to non-low-density lipoprotein cholesterol ratio(LNLR)and cM0(i+)staging:Group A [LNLR＞1.68 and diagnosed with cM0(i+)], Group B [LNLR＞1.68 or diagnosed with cM0(i+)], and Group C(LNLR ≤1.68 and diagnosed with cM0). Kaplan-Meier survival analysis was used to plot survival curves for patients in different groups. The log-rank test was employed to compare differences in recurrence-free survival(RFS)among the subgroups. Multivariate Cox regression analysis was conducted to identify the independent risk factors influencing RFS, and a nomogram prediction model was constructed based on these results. The predictive performance of the model was validated using ROC curves, calibration curves, and decision curves. Results ROC curves were plotted for lipid markers, and LNLR was identified as the most predictive for RFS. Its optimal cutoff point was 1. 68. Patients in Group A experienced a significantly shorter postoperative RFS. Multivariate Cox regression analysis identified preoperative LNLR, cM0(i+)staging, pathological grade, and stage as independent risk factors for RFS. A nomogram model was constructed based on these risk factors. The area under the ROC curve(AUC)for 1-, 3-, and 5-year RFS was 0.896(95% CI:0.8121-0.9627), 0.890(95%CI:0.7879-0.9641), and 0.870(95%CI:0.7697-0.9526), indicating good discriminatory ability and predictive performance. Calibration plots demonstrated good agreement between predicted and actual outcomes. Clinical decision curve analysis showed high clinical net benefit. Conclusion Preoperative LNLR level is an independent risk factor for RFS in ccRCC patients. The prognostic prediction model based on LNLR, cM0(i+)staging, patient pathological grade, and staging demonstrates good predictive performance for RFS and holds potential clinical application value.

Lung transplantation is a definitive treatment for end-stage lung disease and can significantly improve patient prognosis. However, postoperative complications such as infection, rejection, ischemia-reperfusion injury and chronic lung allograft dysfunction intertwine to form a complex pathological network, posing persistent challenges to long-term patient survival. In 2025, research teams worldwide have made systematic progress in the field of basic lung transplantation research. By integrating cutting-edge technologies including single-cell multi-omics, spatial transcriptomics and novel animal models, significant breakthroughs have been achieved in the evolutionary dynamics of drug-resistant infections, molecular mechanisms of immune regulation, programmed cell death, optimization of donor lung protection strategies and early warning of chronic lung allograft dysfunction. This article systematically reviews the representative advances in basic lung transplantation research worldwide in 2025, and deeply analyzes the implications of mechanistic breakthroughs for optimizing diagnosis and treatment strategies, aiming to anchor the direction for innovative breakthroughs and clinical translation in basic lung transplantation research.

Objective To introduce the modeling method of pendulum-like modified rat abdominal heart heterotopic transplantation model and evaluate the quality of the model. Methods An operator without transplantation experience performed 15 consecutive models, recorded the time of each step, changes in body weight and modified Stanford scores, and calculated the surgical success rate, postoperative 1-week survival rate and technical success rate. Ultrasound examinations was performed in 1 week postoperatively. Results The times for donor heart acquisition, donor heart processing, recipient preparation and transplantation anastomosis were (14.3±1.4) min, (3.5±0.6) min, (13.6±2.1) min and (38.3±5.2) min respectively. The surgical success rate was 87% (13/15), and the survival rate 1 week after operative was 100% (13/13). The improved Stanford score indicated a technical success rate of 92% (12/13), and the postoperative 1-week ultrasound examination showed that grafts with Stanford scores ≥3 had detectable pulsation and blood flow signals. Conclusions The pendulum-like modified rat abdominal heart heterotopic transplantation improved model further optimizes the operational steps with a high success rate and stable quality, may be chosen as a modeling option for basic research in heart transplantation in the future.

Lung transplantation is currently the only recognized effective treatment for end-stage lung disease and has improved the quality of life for patients. However, lung transplantation still faces many challenges, including rejection, infection, post-transplant acute kidney injury, post-transplant diabetes mellitus, ischemia-reperfusion injury and donor shortage, etc. Chinese lung transplantation scholars made a series of important progress in the field of clinical research in 2024, focusing on the study and solution of the above problems, and providing new ideas for lung transplantation surgery. This article systematically reviews the clinical research and technological innovation in the field of lung transplantation in 2024, summarizes the achievements of clinical research in the field of lung transplantation in China in 2024, and aims to providing new directions and strategies for future research.

Lung transplantation is the optimal treatment for end-stage lung diseases and can significantly improve prognosis of the patients. However, postoperative complications such as infection, rejection, ischemia-reperfusion injury, and other challenges (like shortage of donor lungs) , limit the practical application of lung transplantation in clinical practice. Chinese research teams have been making continuous efforts and have achieved breakthroughs in basic research on lung transplantation by integrating emerging technologies and cutting-edge achievements from interdisciplinary fields, which has strongly propelled the development of this field. This article will comprehensively review the academic progress made by Chinese research teams in the field of lung transplantation in 2024, with a focus on the achievements of Chinese teams in basic research on lung transplantation. It aims to provide innovative ideas and strategies for key issues in the basic field of lung transplantation and to help China's lung transplantation cause reach a higher level.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Electroencephalogram (EEG) is a non-invasive, high temporal-resolution technique for monitoring brain activity. However, affected by the volume conduction effect, EEG has a low spatial resolution and is difficult to locate brain neuronal activity precisely. The surface Laplacian (SL) technique obtains the Laplacian EEG (LEEG) by estimating the second-order spatial derivative of the scalp potential. LEEG can reflect the radial current activity under the scalp, with positive values indicating current flow from the brain to the scalp (“source”) and negative values indicating current flow from the scalp to the brain (“sink”). It attenuates signals from volume conduction, effectively improving the spatial resolution of EEG, and is expected to contribute to breakthroughs in neural engineering. This paper provides a systematic overview of the principles and development of SL technology. Currently, there are two implementation paths for SL technology: current source density algorithms (CSD) and concentric ring electrodes (CRE). CSD performs the Laplace transform of the EEG signals acquired by conventional disc electrodes to indirectly estimate the LEEG. It can be mainly classified into local methods, global methods, and realistic Laplacian methods. The global method is the most commonly used approach in CSD, which can achieve more accurate estimation compared with the local method, and it does not require additional imaging equipment compared with the realistic Laplacian method. CRE employs new concentric ring electrodes instead of the traditional disc electrodes, and measures the LEEG directly by differential acquisition of the multi-ring signals. Depending on the structure, it can be divided into bipolar CRE, quasi-bipolar CRE, tripolar CRE, and multi-pole CRE. The tripolar CRE is widely used due to its optimal detection performance. While ensuring the quality of signal acquisition, the complexity of its preamplifier is relatively acceptable. Here, this paper introduces the study of the SL technique in resting rhythms, visual-related potentials, movement-related potentials, and sensorimotor rhythms. These studies demonstrate that SL technology can improve signal quality and enhance signal characteristics, confirming its potential applications in neuroscientific research, disease diagnosis, visual pathway detection, and brain-computer interfaces. CSD is frequently utilized in applications such as neuroscientific research and disease detection, where high-precision estimation of LEEG is required. And CRE tends to be used in brain-computer interfaces, that have stringent requirements for real-time data processing. Finally, this paper summarizes the strengths and weaknesses of SL technology and envisages its future development. SL technology boasts advantages such as reference independence, high spatial resolution, high temporal resolution, enhanced source connectivity analysis, and noise suppression. However, it also has shortcomings that can be further improved. Theoretically, simulation experiments should be conducted to investigate the theoretical characteristics of SL technology. For CSD methods, the algorithm needs to be optimized to improve the precision of LEEG estimation, reduce dependence on the number of channels, and decrease computational complexity and time consumption. For CRE methods, the electrodes need to be designed with appropriate structures and sizes, and the low-noise, high common-mode rejection ratio preamplifier should be developed. We hope that this paper can promote the in-depth research and wide application of SL technology.

This study investigated the disease characteristics and clinical traits of Nocardia infection,and analyzed the antibiotic resistance phenotypes,antibiotic resistance genes,and evolutionary characteristics of the strains,to provide a basis for Nocardia diag-nosis and treatment.A total of 31 Nocardia strains from a hospital in Hebei Province were collected from 2020 to 2023.The strains were identified through mass spectrometry and whole genome sequencing.Antibiotic susceptibility testing was conducted with the broth macrodilution method,and whole genome sequencing data were used to predict antibiotic resistance genes and comprehensively ana-lyze antibiotic resistance phenotypes.The 31 strains of Nocardia comprised 21 strains of Nocardia farcinica,3 strains of Nocardia ter-penica,three strains of Nocardia brasiliensis,two strains of Nocardia cyriacigeorgica,and two strains of Nocardia nova.The ceftriaxone susceptibility of 21 Nocardia farcinica strains was 85.7%,and all 31 strains were susceptible to imipenem,except for three strains of Nocardia brasiliensis.Rifampicin,aminoglycoside,and β-lactam resistance genes were found in Nocardia farcinica.Pathogenic tests should be carried out in a timely manner for suspected Nocardia infections.In clinical treatment of Nocardia infection,infected strains should be confirmed,and antibiotics should be used rationally according to the antibiotic susceptibility test results.