ObjectiveThe widespread adoption of portable fundus cameras for primary care and community screening is hindered by limitations in current autofocus(AF) technologies. Image-based methods relying on sharpness evaluation require iterative searches, resulting in slow convergence, while projection-based techniques are susceptible to optical artifacts and calibration errors. To address these challenges, this study introduces a novel AF system based on direct wavefront sensing, designed to deliver simultaneous high speed, high precision, and operational robustness within the compact form factor essential for portable ophthalmic devices. MethodsOur approach fundamentally reimagines the AF process by directly measuring the ocular wavefront aberration. We developed a custom portable fundus camera integrating a miniaturized Shack-Hartmann wavefront sensor (SHWS) into the optical path. An 850 nm laser diode projects a point source onto the retina via oblique illumination to minimize corneal reflections. Light scattered from this spot carries the eye’s refractive error through the imaging optics and is directed to the SHWS, positioned at a plane optically conjugate to the primary color CMOS imaging sensor. A microlens array within the SHWS samples the incident wavefront, generating a pattern of focal spots on a CCD. Real-time centroid analysis of these spots provides a map of local wavefront slopes. These measurements are processed through a singular value decomposition (SVD) algorithm to fit a Zernike polynomial basis set, enabling real-time reconstruction of the wavefront phase. The defocus component (S) is extracted from the second-order Zernike coefficients, providing a direct, quantitative measure of the refractive error in diopters. This value serves as a precise error signal in a closed-loop control system, which commands a voice-coil actuated focusing lens to its null position in a single, deterministic step, eliminating the need for iterative search algorithms. ResultsComprehensive evaluation demonstrated the system’s high performance. Testing on a calibrated model eye (OEMI-7) established a highly linear relationship between the computed defocus S and the focusing lens position across a ±20 Diopter (D) compensation range, achievable within a 5 mm mechanical travel. The system achieved a focusing precision of 0.08 D, corresponding to an 18-fold improvement over a conventional projection spot-size method tested under identical conditions. The total focus acquisition time, encompassing wavefront measurement, computation, and lens actuation, averaged under 0.5 s. Clinical validation with 25 human volunteers (50 eyes, refractive range -15 D to +10 D) confirmed practical efficacy. The wavefront-sensing AF succeeded in 92% of attempts with a mean time of 0.5 s, substantially outperforming a projection-based benchmark which achieved only a 32% success rate with an average time of 4.25 s. The system provided instantaneous directional guidance and maintained stability during minor ocular movements. Objective assessment of image quality, via amplitude contrast of retinal vasculature, showed consistent and significant enhancement following AF correction across the entire tested diopter range. ConclusionThis work successfully implements and validates a direct wavefront-sensing autofocus paradigm for portable fundus cameras. By directly quantifying and compensating for the optical defocus aberration, this method bypasses the fundamental limitations of image-processing and projection-based techniques, enabling rapid, precise, and deterministic diopter compensation. The developed system delivers an exceptional combination of a wide operational range (±20 D), high accuracy (0.08 D), fast convergence (0.5 s), and a compact physical footprint. This technology provides a practical and high-performance focusing solution capable of enhancing the reliability, throughput, and diagnostic utility of portable retinal imaging in large-scale screening applications. Future efforts will be directed towards system cost optimization and performance adaptation for diverse ocular conditions.

Bile-processed Coptidis Rhizoma（B-pCR）， first documented in Shengji Zonglu， is a unique processed products of Coptidis Rhizoma（CR） characterized by "mutual enhancement processing" and "enhancing the cold property of cold-natured herbs". Pig bile can enhance the bitter and cold properties of CR， yielding potent effects in purging excess fire from the liver and gallbladder. The processing increases the dissolution of alkaloids such as berberine， coptisine， and palmatine， while introducing bile acids from pig bile， including taurine-type and glycine-type cholic acids. This enhances its pharmacological effects， such as antipyretic activity， regulation of glucose and lipid metabolism disorders， and intestinal absorption. Traditional processing techniques and quality standards for B-pCR are outlined in the Shanghai Traditional Chinese Medicine（TCM） Decoction Pieces Processing Standard and the Gansu TCM Processing Standard. However， incomplete specifications for critical process parameters and quality criteria significantly impact its production and clinical application. A review of research over the past two decades on the processing history， process optimization， quality evaluation， material basis， and changes in pharmacological effects and properties of B-pCR reveals that the pretreatment method and dosage of pig bile， and processing temperature are key factors influencing its quality. Furthermore， current quality standards lack specific indicators. Additionally， the enhancement of the cold property and medicinal efficacy direction of B-pCR is not only associated with changes in alkaloid groups but also depend on the synergistic effects of bile acids. This review can provide insights for improving the quality evaluation system of B-pCR.

[摘 要] 目的：探讨复发/转移性鼻咽癌（NPC）接受含PD-1单抗免疫治疗的临床特征和预后影响因素。方法：回顾性分析2019年3月至2024年7月期间南部战区总医院确诊的95例NPC患者的临床资料和外周血生化及免疫学指标。预后分析采用Kaplan-Meier曲线，组间比较使用Log-rank检验，采用Cox比例风险模型进行单因素和多因素分析。结果：95例患者中男性81例，女性14例，中位年龄49.72岁（16~74岁），Ⅳ期91例（95.79%），所有患者均采用免疫治疗，联合或不联合化疗方案治疗，中位无进展生存期（mPFS）为10.5个月，客观缓解率（ORR）70.53%，疾病控制率（DCR）89.47%，接受含铂治疗方案患者PFS相对更长，且差异有统计学意义。紫杉醇 + 顺铂 + 氟尿嘧啶（TPF）对比吉西他滨 + 顺铂（GP）和紫杉醇 + 顺铂（TP）显示出更长的PFS，但差异无统计学意义。不同PD-1单抗治疗组间的PFS未显示出有统计学意义的差异。单因素及多因素Cox回归分析结果显示，肿瘤复发状态、初始血浆EBV感染状态、治疗周期数、基线外周血SII是复发/转移性NPC患者接受PD-1抑制剂治疗疗效预测的独立相关因素（均P < 0.05），并且非复发患者、初始血浆EBV DNA阳性、接受 ≥ 4治疗周期、基线外周血SII < 772.81的患者接受PD-1抑制剂治疗预后相对更好。结论：在接受PD-1抑制剂治疗的复发/转移性NPC患者中，非复发患者、初始血浆EBV DNA阳性、≥ 4治疗周期且外周血SII < 772.81者PFS相对更长，可早期识别免疫治疗效果不佳患者并精准干预。

Objective To construct large medical model named by "Huaxi HongYi"and explore its application effectiveness in assisting medical record generation. Methods By the way of a full-chain medical large model construction paradigm of "data annotation - model training - scenario incubation", through strategies such as multimodal data fusion, domain adaptation training, and localization of hardware adaptation, "Huaxi HongYi" with 72 billion parameters was constructed. Combined with technologies such as speech recognition, knowledge graphs, and reinforcement learning, an application system for assisting in the generation of medical records was developed. Results Taking the assisted generation of discharge records as an example, in the pilot department, after using the application system, the average completion times of writing a medical records shortened (21 min vs. 5 min) with efficiency increased by 3.2 time, the accuracy rate of the model output reached 92.4%. Conclusion It is feasible for medical institutions to build independently controllable medical large models and incubate various applications based on these models, providing a reference pathway for artificial intelligence development in similar institutions.

BACKGROUND: While emotional distress, encompassing anxiety and depression, has been associated with negative clinical outcomes, its impact across various clinical departments and general hospitals has been less explored. Previous studies with limited sample sizes have examined the effectiveness of specific treatments (e.g., antidepressants) rather than a systemic management strategy for outcome improvement in non-psychiatric inpatients. To enhance the understanding of the importance of addressing mental health care needs among non-psychiatric patients in general hospitals, this study retrospectively investigated the impacts of emotional distress and the effects of early detection and management of depression and anxiety on hospital length of stay (LOS) and rate of long LOS (LLOS, i.e., LOS >30 days) in a large sample of non-psychiatric inpatients. METHODS: This retrospective cohort study included 487,871 inpatients from 20 non-psychiatric departments of a general hospital. They were divided, according to whether they underwent a novel strategy to manage emotional distress which deployed the Huaxi Emotional Distress Index (HEI) for brief screening with grading psychological services (BS-GPS), into BS-GPS ( n = 178,883) and non-BS-GPS ( n = 308,988) cohorts. The LOS and rate of LLOS between the BS-GPS and non-BS-GPS cohorts and between subcohorts with and without clinically significant anxiety and/or depression (CSAD, i.e., HEI score ≥11 on admission to the hospital) in the BS-GPS cohort were compared using univariable analyses, multilevel analyses, and/or propensity score-matched analyses, respectively. RESULTS: The detection rate of CSAD in the BS-GPS cohort varied from 2.64% (95% confidence interval [CI]: 2.49%-2.81%) to 20.50% (95% CI: 19.43%-21.62%) across the 20 departments, with a average rate of 5.36%. Significant differences were observed in both the LOS and LLOS rates between the subcohorts with CSAD (12.7 days, 535/9590) and without CSAD (9.5 days, 3800/169,293) and between the BS-GPS (9.6 days, 4335/178,883) and non-BS-GPS (10.8 days, 11,483/308,988) cohorts. These differences remained significant after controlling for confounders using propensity score-matched comparisons. A multilevel analysis indicated that BS-GPS was negatively associated with both LOS and LLOS after controlling for sociodemographics and the departments of patient discharge and remained negatively associated with LLOS after controlling additionally for the year of patient discharge. CONCLUSION Emotional distress significantly prolonged the LOS and increased the LLOS of non-psychiatric inpatients across most departments and general hospitals. These impacts were moderated by the implementation of BS-GPS. Thus, BS-GPS has the potential as an effective, resource-saving strategy for enhancing mental health care and optimizing medical resources in general hospitals.
Humans ; Retrospective Studies ; Male ; Length of Stay/statistics & numerical data* ; Female ; Middle Aged ; Adult ; Psychological Distress ; Inpatients/psychology* ; Aged ; Anxiety/diagnosis* ; Depression/diagnosis*

Alzheimer's disease (AD), a prototypical neurodegenerative disorder, encompasses multifaceted pathological processes. As pivotal cellular structures within the central nervous system, ion channels play critical roles in regulating neuronal excitability, synaptic transmission, and neurotransmitter release. Extensive research has revealed significant alterations in the expression and function of ion channels in AD, implicating an important role of ion channels in the pathogenesis of abnormal Aβ deposition, neuroinflammation, oxidative stress, and disruptions in calcium homeostasis and neural network functionality. This review systematically summarizes the crucial roles and underlying mechanisms of ion channels in the onset and progression of AD, highlighting how these channel abnormalities contribute to AD pathophysiology. We also discuss the therapeutic potential of ion channel modulation in AD treatment, emphasizing the importance of addressing multifactorial nature and heterogeneity of AD. The development of multi-target drugs and precision therapies is proposed as a future direction of scientific research.
Alzheimer Disease/therapy* ; Humans ; Ion Channels/physiology* ; Oxidative Stress ; Animals ; Amyloid beta-Peptides/metabolism* ; Synaptic Transmission ; Calcium/metabolism*

Osteoporosis(OP) is a senile bone disease characterized by an imbalance between bone remodeling and bone formation. Targeting pathogenesis of kidney deficiency, spleen deficiency, and blood stasis, Bushen Jianpi Huoxue Decoction has a significant effect on the treatment of OP by tonifying kidney, invigorating spleen, and activating blood circulation. MicroRNA(miRNA) and the anti-apoptotic protein B-cell lymphoma-2-like protein 1(BCL2L1) are closely related to bone cell metabolism. Therefore, in this study, the binding of miR-140-5p to BCL2L1 was detected by dual luciferase assay and polymerase chain reaction(PCR). After silencing or overexpressing miR-140-5p, the apoptosis, autophagy, and osteogenic function of human fetal osteoblast cell line 1.19(HFOB1.19) were observed by flow cytometry and Western blot. Bushen Jianpi Huoxue Decoction-containing serum was prepared by intragastric administration of Bushen Jianpi Huoxue Decoction in rats. Different concentrations of Bushen Jianpi Huoxue Decoction-containing serum were used to treat HFOB1.19 with or without miR-140-5p mimic. The expression of osteogenic proteins in each group was observed, and the role of miR-140-5p/BCL2L1 in apoptosis and autophagy of HFOB1.19 was studied, along with the effect of Bushen Jianpi Huoxue Decoction on these processes. As indicated by the dual luciferase assay, miR-140-5p bound to BCL2L1. Flow cytometry and Western blot showed that miR-140-5p promoted apoptosis and inhibited autophagy in HFOB1.19. After intervention with high, medium, and low doses of Bushen Jianpi Huoxue Decoction-medicated serum, compared with the miR-140-5p NC group, the expression of osteocalcin(OCN), osteopontin(OPN), Runt-related transcription factor 2(RUNX2), and transforming growth factor beta 1(TGF-β1) decreased in the miR-140-5p mimic group, while the expression of bone morphogenetic protein 2(BMP2) showed no significant difference under high-dose intervention. Therefore, miR-140-5p/BCL2L1 can promote apoptosis and inhibit autophagy in HFOB1.19. Bushen Jianpi Huoxue Decoction can affect the osteogenic effect of miR-140-5p through BMP2.
MicroRNAs/metabolism* ; Autophagy/drug effects* ; Apoptosis/drug effects* ; Humans ; Drugs, Chinese Herbal/administration & dosage* ; Animals ; Cell Line ; bcl-X Protein/metabolism* ; Osteoblasts/metabolism* ; Rats ; Osteoporosis/physiopathology* ; Male ; Rats, Sprague-Dawley ; Osteogenesis/drug effects*

Continuous manufacturing, as an innovative pharmaceutical production model, offers advantages such as high production efficiency and ease of control compared to traditional batch production, aligning with the future trend of drug production moving toward greater efficiency and intelligence. However, the development of continuous manufacturing technology in wet granulation has been slow. On one hand, this is closely related to its high technical complexity, substantial equipment investment costs, and stringent process control requirements. On the other hand, the long-term use of the traditional batch production model has created strong path dependence, and the lack of mature standardized processes further increases the difficulty of technological transformation. To promote the deep integration of wet granulation technology with continuous manufacturing, this review systematically outlines the current application of wet granulation in continuous manufacturing. It focuses on the development of key technologies such as online detection, process modeling, and process scale-up, with the aim of providing a reference for process innovation and application in wet granulation.
Drug Compounding/instrumentation* ; Technology, Pharmaceutical/methods* ; Drugs, Chinese Herbal/chemistry* ; Models, Theoretical

OBJECTIVE: To investigate the accuracy and safety of pedicle screw placement using 3D-printed auxiliary guides in scoliosis correction surgery for adolescents. METHODS: A retrospective analysis was conducted on the clinical data of 51 patients who underwent posterior scoliosis correction surgery from January 2020 to March 2023. Among them, there were 35 cases of adolescent idiopathic scoliosis and 16 cases of congenital scoliosis. The patients were divided into two groups based on the auxiliary tool used:the 3D-printed auxiliary guide screw placement group (3D printing group) and the free-hand screw placement group (free-hand group, without auxiliary tools). The 3D printing group included 32 patients (12 males and 20 females) with an average age of (12.59±2.60) years;the free-hand group included 19 patients (7 males and 12 females) with an average age of (14.58±3.53) years. The two groups were compared in terms of screw placement accuracy and safety, spinal correction rate, intraoperative blood loss, number of intraoperative fluoroscopies, operation time, hospital stay, and preoperative and last follow-up scores of the Scoliosis Research Society-22 (SRS-22) questionnaire. RESULTS: A total of 707 pedicle screws were placed in the two groups, with 441 screws in the 3D printing group and 266 screws in the free-hand group. All patients in both groups successfully completed the surgery. There was a statistically significant difference in operation time between the two groups (P<0.05). The screw placement accuracy rate of the 3D printing group was 95.46% (421/441), among which the Grade A placement rate was 89.34% (394/441);the screw placement accuracy rate of the free-hand group was 86.47% (230/266), with a Grade A placement rate of 73.31% (195/266). There were statistically significant differences in the accuracy of Grade A, B, and C screw placements between the two groups (P<0.05), while no statistically significant differences were observed in intraoperative blood loss, number of fluoroscopies, correction rate, or hospital stay (P>0.05). In the SRS-22 questionnaire scores, the scores of functional status and activity ability, self-image, mental status, and pain of patients in each group at the last follow-up were significantly improved compared with those before surgery (P<0.05), but there were no statistically significant differences in all scores between the two groups (P>0.05). CONCLUSION In scoliosis correction surgery, compared with traditional free-hand screw placement, the use of 3D-printed auxiliary guides for screw placement significantly improves the accuracy and safety of screw placement and shortens the operation time.
Humans ; Male ; Scoliosis/surgery* ; Female ; Adolescent ; Printing, Three-Dimensional ; Retrospective Studies ; Pedicle Screws ; Child