Minimally invasive surgery (MIS) for hallux valgus correction has become increasingly popular over the past decade as an alternative to traditional open osteotomy techniques. Following the limitations of first- and second-generation percutaneous techniques, third-generation MIS, characterized by percutaneous osteotomy with a Shannon burr and stable screw fixation, has shown improved reproducibility and clinical outcomes. This review summarizes the current concepts of third-generation and later MIS techniques for hallux valgus correction, focusing on the surgical principles, technical considerations, fixation strategies, and postoperative management. In addition, the clinical and radiographic outcomes of MIS are compared with conventional open osteotomies. The available evidence consistently shows that MIS provides comparable deformity correction, functional improvement, complication rates, and recurrence rates to those of open procedures, while offering advantages such as reduced early postoperative pain, smaller incisions, and faster recovery. Recent studies support expanding MIS indications to include severe hallux valgus deformities that can provide satisfactory correction and acceptable complication profiles when appropriate techniques and fixation methods are used. Despite the ongoing debates regarding the optimal osteotomy type, fixation strategy, and proximal correction in severe deformities, MIS has emerged as a safe and effective surgical option across a broad spectrum of hallux valgus severity. Continued refinement of the surgical techniques, broader application across a wide range of hallux valgus etiologies, and long-term outcome data will further define the role of MIS in hallux valgus surgery.

Purpose: Accumulating evidence has clarified that gut dysbiosis is involved in lung cancer development and progression. Although the relationship between tumors and gut microbiota has been extensively studied using clinical samples, no studies have examined the association between mutant epidermal growth factor receptor (EGFR)–induced lung carcinogenesis and dysbiosis in gut microbiota. Therefore, we investigated the gut microbiota profiles in stool samples from human lung-specific conditional EGFR-mutant transgenic mice during lung tumor carcinogenesis. Materials and Methods: Stool samples were collected before tamoxifen treatment (V1) and at each time point following mutant EGFR expression in lung tissue (V2) and lung tumor appearance (V3). Fecal 16S rRNA taxonomy was analyzed to assess microbial diversity, composition, and dynamic changes at each time point. Results: We found that microbiota richness and diversity were significantly elevated when tumors developed and grew in the lung. Phylogenetic analysis of the microbial community revealed that Lachnospiraceae, Ruminococcaceae, Porphyromonadaceae, Rhodospirillaceae, Odoribacteraceae, and Desulfovibrionaceae showed a significant increase at the V3 stage compared to the V1 stage at the family level. In contrast, Lactobacillaceae, Bacteroidaceae, Muribaculaceae, Coriobacteriaceae, and Rikenellaceae significantly decreased at the V3 stage compared to the V1 stage. Furthermore, Lactobacillus species, also known as short chain fatty acid-producing bacteria, were relatively abundant at the V1 stage but were depleted with the occurrence of lung tumors at the V3 stage. Conclusion Changes in gut microbiota, such as Lactobacillus species, may be a predictive factor for the emergence and progression of tumors in an animal model of lung adenocarcinoma induced by mutant EGFR.

Background and Objectives: Clinical characteristics and outcomes in acute heart failure (AHF) vary by phenotype. We assessed phenotype-specific features, treatment patterns, and outcomes in a nationwide Korean cohort. Methods: The Korean Heart Failure III registry prospectively enrolled 7,351 AHF admissions at 47 hospitals. Among 6,777 patients with available left ventricular ejection fraction (EF), phenotypes were defined as heart failure with reduced EF (HFrEF, ≤40%), mildly reduced EF (HFmrEF,41–49%), or preserved EF (HFpEF, ≥50%). The primary endpoint was a 12-month composite of all-cause death or heart transplantation, evaluated from index admission and, among hospital survivors, from discharge. We used inverse probability weighting (multinomial generalized boosted models with stabilized, trimmed weights) and weighted Cox proportional-hazards models to estimate hazard ratios (HRs). Results: Phenotype distribution was 58.9% HFrEF, 13.6% HFmrEF, and 27.5% HFpEF. Crude 12-month composite rates from index admission were 13.4% (HFrEF), 12.7% (HFmrEF), and 16.8% (HFpEF). After weighting, from index admission, HFmrEF (HR, 0.892; 95% confidence interval [CI], 0.731–1.088) and HFpEF (HR, 1.101; 95% CI, 0.939–1.291) did not differ from HFrEF; from discharge, HFpEF had modestly higher risk (HR, 1.207; 95% CI, 1.008–1.445) whereas HFmrEF did not (HR, 1.039; 95% CI, 0.844–1.279). Hyponatremia and chronic kidney disease were consistent adverse markers, while angiotensin-converting enzyme inhibitor/ angiotensin II receptor blocker use at discharge was protective. Conclusions Across the EF spectrum, phenotypes showed distinct profiles and risk. Postdischarge risk was modestly higher in HFpEF, supporting phenotype-tailored care and systematic discharge optimization in Korean patients with AHF.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Hemangiomas are rare, benign vascular neoplasms that are more common in patients with end-stage renal disease. Here, we describe 2 cases of hemangioma misdiagnosed as renal cell carcinoma before renal transplantation. The key finding in our case was the misdiagnosis of hemangiomas as renal cell carcinoma based on computed tomography and magnetic resonance imaging in patients with end-stage renal disease. Because living transplantation was planned for our patients, we performed rapid surgical resection of the heterogeneously enhancing renal masses to avoid delays in transplantation. Our case highlights the importance of rapid surgical resection of enhanced renal masses to confirm diagnosis, thereby avoiding delays in patients scheduled for renal transplantation.

Background: The tibiofibular syndesmosis is essential for preserving the stability of the ankle. Acute syndesmotic injuries with evident or latent instability usually warrant surgical interventions. This cadaveric study examines and compares biomechanical characteristics between the following treatments for syndesmosis injuries: suture-button fixation plus syndesmotic repair and screw fixation. Methods: The lower extremities of 10 cadavers disarticulated at the knee joints were used, yielding 20 feet. Ten feet underwent surgery using the suture-button fixation with syndesmotic repair, while the remaining 10 feet underwent surgery using screw fixation. Before surgical treatment of syndesmosis injuries, each cadaveric lower limb underwent preliminary physiological cyclic loading, which was followed by a series of postfixation cyclic loading tests after the surgical procedure. Results: Our principal finding is that suture-button fixation with syndesmotic repair provided torsional strength comparable to that of screw fixation. The mean failure torque did not differ between the 2 groups, but the rotational stiffness was significantly lower in the suture-button fixation/augmentation group. Conclusions Suture-button fixation/augmentation facilitates flexible (physiological) syndesmosis movement and may be a useful alternative treatment for ankle syndesmosis injury.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Background: Primary cutaneous CD30+ lymphoproliferative disorders (pcCD30-LPDs) are a diseases with various clinical and prognostic characteristics. Objective: Increasing our knowledge of the clinical characteristics of pcCD30-LPDs and identifying potential prognostic variables in an Asian population. Methods: Clinicopathological features and survival data of pcCD30-LPD cases obtained from 22 hospitals in South Korea were examined. Results: A total of 413 cases of pcCD30-LPDs (lymphomatoid papulosis [LYP], n=237; primary cutaneous anaplastic large cell lymphoma [C-ALCL], n=176) were included. Ninety percent of LYP patients and roughly 50% of C-ALCL patients presented with multiple skin lesions. Both LYP and C-ALCL affected the lower limbs most frequently. Multiplicity and advanced T stage of LYP lesions were associated with a chronic course longer than 6 months. Clinical morphology with patch lesions and elevated serum lactate dehydrogenase were significantly associated with LPDs during follow-up in LYP patients. Extracutaneous involvement of C-ALCL occurred in 13.2% of patients. Lesions larger than 5 cm and increased serum lactate dehydrogenase were associated with a poor prognosis in C-ALCL. The survival of patients with C-ALCL was unaffected by the anatomical locations of skin lesions or other pathological factors. Conclusion The multiplicity or size of skin lesions was associated with a chronic course of LYP and survival among patients with C-ALCL.

Background: Atopic dermatitis (AD) is a common skin disease with a wide range of symptoms. Due to the rapidly changing treatment landscape, regular updates to clinical guidelines are needed. Objective: This study aimed to update the guidelines for the treatment of AD to reflect recent therapeutic advances and evidence-based recommendations. Methods: The Patient characteristics, type of Intervention, Control, and Outcome framework was used to determine 48 questions related to AD management. Evidence was graded, recommendations were determined, and, after 2 voting rounds among the Korean Atopic Dermatitis Association (KADA) council members, consensus was achieved. Results: This guideline provides treatment guidance on advanced systemic treatment modalities for AD. In particular, the guideline offers up-to-date treatment recommendations for biologics and Janus-kinase inhibitors used in the treatment of patients with moderate to severe AD.It also provides guidance on other therapies for AD, along with tailored recommendations for children, adolescents, the elderly, and pregnant or breastfeeding women. Conclusion KADA’s updated AD treatment guidelines incorporate the latest evidence and expert opinion to provide a comprehensive approach to AD treatment. The guidelines will help clinicians optimize patient-specific therapies.