BACKGROUND:How to effectively promote bone regeneration and bone reconstruction after bone injury has always been a key issue in clinical bone repair research.The use of biological and degradable materials loaded with bioactive factors to treat bone defects has excellent application prospects in bone repair. OBJECTIVE:To investigate the effect of polylactic acid-glycolic acid copolymer(PLGA)composite scaffold modified by lysine-grafted graphene oxide nanoparticles(LGA-g-GO)on osteogenic differentiation and new bone formation. METHODS:PLGA was dissolved in dichloromethane and PLGA scaffold was prepared by solvent evaporation method.PLGA/GO composite scaffolds were prepared by dispersing graphene oxide uniformly in PLGA solution.LGA-g-GO nanoparticles were prepared by chemical grafting method,and the PLGA/LGA-g-GO composite scaffolds were constructed by blending LGA-g-GO nanoparticles at different mass ratios(1%,2%,and 3%)with PLGA.The micromorphology,hydrophilicity,and protein adsorption capacity of scaffolds of five groups were characterized.MC3T3 cells were inoculated on the surface of scaffolds of five groups to detect cell proliferation and osteogenic differentiation. RESULTS AND CONCLUSION:(1)The surface of PLGA scaffolds was smooth and flat under scanning electron microscope,while the surface of the other four scaffolds was rough.The surface roughness of the composite scaffolds increased with the increase of the addition of LGA-g-GO nanoparticles.The water contact angle of PLGA/LGA-g-GO(3%)composite scaffolds was lower than that of the other four groups(P<0.05).The protein adsorption capacity of PLGA/LGA-g-GO(1%,2%,and 3%)composite scaffolds was stronger than PLGA and PLGA/GO scaffolds(P<0.05).(2)CCK-8 assay showed that PLGA/LGA-g-GO(2%,3%)composite scaffold could promote the proliferation of MC3T3 cells.Alkaline phosphatase staining and alizarin red staining showed that the cell alkaline phosphatase activity in PLGA/LGA-g-GO(2%,3%)group was higher than that in the other three groups(P<0.05).The calcium deposition in the PLGA/GO and PLGA/LGA-g-GO(1%,2%,and 3%)groups was higher than that in the PLGA group(P<0.05).(3)In summary,PLGA/LGA-g-GO composite scaffold can promote the proliferation and osteogenic differentiation of osteoblasts,and is conducive to bone regeneration and bone reconstruction after bone injury.

Taxifolin (Tax) has been proved to be a medicinal edible substance with protective effects against alcoholic liver injury, however, its poor hydrophilicity and permeability have hindered the clinical application of Tax. In this study, we prepared taxifolin-phosphatidylcholine/sodium deoxycholate/PVP-K30 micells (Tax-MLs). Box-Behnken test was used to obtain the optimal preparation process, and Tax-MLs were characterised by transmission electron microscopy and fourier transform infrared spectroscopy. Physicochemical parameters such as proximate micelle concentration, equilibrium solubility and oil-water partition coefficient were determined, and the release pattern of Tax-MLs was investigated by in vitro digestion simulation. Alcoholic liver injury model to explore the in vivo efficacy of Tax-MLs. The results showed that the average particle size, polydispersity index (PDI) and zeta potential of Tax-MLs were 36.90 ± 4.57 nm, 0.194 ± 0.01 and -32.6 ± 0.35 mV, respectively, and the uniform size and distribution of Tax-MLs were observed by transmission electron microscopy. The formation of Tax-MLs was proved by differential scanning calorimetry and fourier transform infrared spectroscopy. In terms of physicochemical properties, the solubility of Tax-MLs in water increased by 92.02 times compared with Tax, and its oil-water partition coefficient in water increased from 0.43 to 1.14, which proved that Tax-MLs could improve its solubility and permeability. The in vivo pharmacodynamic results showed that compared with the Tax group, Tax-MLs low, medium and high dose groups showed a significant reduction in liver indices and serum levels of aspartate aminotransferase (AST) and alanine aminotransferase (ALT) (P < 0.05), and enhanced the activities of superoxide dismutase (SOD) and glutathione (GSH), and lowered the levels of malondialdehyde (MDA) more significantly in the hepatic tissues. Tax-MLs effectively improved drug solubility and permeability, and enhanced the protective effect against alcoholic liver injury. Animal experiments were conducted with approval from the Animal Ethics Committee of Changchun University of Traditional Chinese Medicine (approval number: 2023601).

With the completion of the "Human Genome Project" and the smooth progress of the "Herbal Genome Project", the research wave of RNAomics is gradually advancing, opening the research gateway for the modernization of traditional Chinese medicine (TCM) and initiating the post-genome era of medicinal plant RNA research. Therefore, this article proposes for the first time the concept of HerbRNomes, which involves constructing databases of medicinal plant, medicinal fungus, and medicinal animal RNA at different stages, from different origins, and in different organs. This research aims to explore the role of HerbRNA in self-genetic information transmission, functional regulation, as well as cross-species regulation functional mechanisms and key technologies. It also investigates application scenarios, providing a theoretical basis and research ideas for the resistance of TCM or medicinal plants to adversity and stress, molecular assistant breeding, and the development of small nucleic acid drugs. This article reviews recent research progress in elucidating the molecular mechanisms of the transmission and expression of genetic information, self-regulation and cross-species regulation of herbs at the RNA level, along with key technologies. It proposes a development strategy for small nucleic acid drugs based on HerbRNomes, providing theoretical support and guidance for the modernization of TCM based on HerbRNomes research.

AIM: To analyze the changes of retinal structure and function before and after panretinal photocoagulation(PRP)in patients with proliferative diabetic retinopathy(PDR).METHODS: Prospective study. Totally 98 cases(98 eyes)of PDR patients who underwent PRP in Eye Hospital of Wenzhou Medical University from January 2022 to May 2023 were included. Optical coherence tomography angiography(OCTA)was used to detect central retinal thickness(CRT), central macular thickness(CMT), subfoveal choroidal thickness(SFCT), foveal avascular zone(FAZ), deep vascular complex(DVC)blood flow density, superficial vascular complex(SVC)blood flow density before and at 1 wk, 1 and 3 mo after PRP. During the follow-up, 1 eye underwent vitrectomy, 2 eyes were lost to follow-up, and finally 95 eyes completed 1 a follow-up, with a loss rate of 3%. According to the visual prognosis at 1 a after treatment, the patients were divided into two groups: 73 eyes in good prognosis group and 22 eyes in poor prognosis group(including 9 eyes of visual disability and 13 eyes of visual regression). The changes in retinal structure and function before and after PRP treatment were compared between the two groups of patients, and the receiver operating characteristic(ROC)curve and decision curve were used to analyze the predictive value of retinal structure and function for PDR treatment.RESULTS: There were statistical significant differences in PDR staging, CRT, CMT, SFCT, DVC blood flow density, and SVC blood flow density between the two groups of patients before treatment(all P<0.05). At 1 wk, 1 and 3 mo after treatment, the FAZ area of both groups decreased compared to before treatment, while the blood flow density of DVC and SVC increased compared to before treatment(both P<0.05). However, there was no significant difference in the blood flow density of FAZ, DVC, and SVC between the two groups at 1 wk, 1 and 3 mo after treatment(all P>0.05). The CRT, CMT and SFCT of the two groups at 1 wk after treatment were higher than those before treatment(all P<0.05), but there were no significant differences between the two groups(all P>0.05). The CRT, CMT and SFCT at 1 and 3 mo after treatment were lower than those at 1 wk after treatment and before treatment in both groups. The CRT, CMT and SFCT in the poor prognosis group at 3 mo after treatment were higher than those at 1 mo after treatment, and were higher than those in the good prognosis group(all P<0.05). ROC analysis showed that, at 3 mo after laser treatment in PDR patients, the area under the curve of the CRT, CMT, and SFCT alone or in combination after treatment for 1 a was 0.788, 0.781, 0.783, and 0.902, respectively, and the combined prediction value was better(P<0.05). Decision curve analysis showed that the combined detection of CRT, CMT, and SFCT in PDR patients at 3 mo after treatment can improve the predictive value of visual prognosis.CONCLUSION: The optimal time for retinal structure and function recovery in PDR patients after PRP treatment is between 1 wk and 1 mo. OCTA measurement of CRT, CMT, and SFCT at 3 mo after treatment can predict the visual prognosis during the 1 a treatment period.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Methods: Seventy-five patients with atlas fracture were included from January 2015 to December 2020. Based on the anatomy of the fracture line, atlas fractures were divided into three types. Each type was divided into two subtypes according to the fracture displacement. Unweighted Cohen kappa coefficients were applied to evaluate the reliability and reproducibility. Results: According to the new classification, 17 cases of type A1, 12 of type A2, seven of type B1, 13 of type B2, 12 of type C1, and 14 of type C2 were identified. The K-values of the interobserver and intraobserver reliability were 0.846 and 0.912, respectively, for the new classification. The K-values of interobserver reliability for types A, B, and C were 0.843, 0.799, and 0.898, respectively. The K-values of intraobserver reliability for types A, B, and C were 0.888, 0.910, and 0.935, respectively. The mean K-values of the interobserver and intraobserver reliability for subtypes were 0.687 and 0.829, respectively. Conclusions The new classification of atlas fractures can cover nearly all atlas fractures. This system is the first to evaluate the severity of fractures based on the C1 articular facet and fracture displacement and strengthen the anatomy ring of the atlas. It is concise, easy to remember, reliable, and reproducible.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Methods: Seventy-five patients with atlas fracture were included from January 2015 to December 2020. Based on the anatomy of the fracture line, atlas fractures were divided into three types. Each type was divided into two subtypes according to the fracture displacement. Unweighted Cohen kappa coefficients were applied to evaluate the reliability and reproducibility. Results: According to the new classification, 17 cases of type A1, 12 of type A2, seven of type B1, 13 of type B2, 12 of type C1, and 14 of type C2 were identified. The K-values of the interobserver and intraobserver reliability were 0.846 and 0.912, respectively, for the new classification. The K-values of interobserver reliability for types A, B, and C were 0.843, 0.799, and 0.898, respectively. The K-values of intraobserver reliability for types A, B, and C were 0.888, 0.910, and 0.935, respectively. The mean K-values of the interobserver and intraobserver reliability for subtypes were 0.687 and 0.829, respectively. Conclusions The new classification of atlas fractures can cover nearly all atlas fractures. This system is the first to evaluate the severity of fractures based on the C1 articular facet and fracture displacement and strengthen the anatomy ring of the atlas. It is concise, easy to remember, reliable, and reproducible.