ObjectiveTo observe the changes in the levels of different subtypes of epidermal growth factor receptor （ErbB）， namely ErbB1， ErbB2， ErbB3， and ErbB4， in the spinal dorsal horn of inflammatory pain model rats， and to explore their mechanism of mediating hyperalgesia as well as the intervention mechanism of electroacupuncture at "Zusanli （ST 36）" and "Kunlun （BL 60）". MethodsThe study was divided into five parts. In experiment 1， 14 Sprague Dawley （SD） rats were randomly divided into control and inflammatory pain group （7 rats each group） to observe the pain behavior and the protein expression of different ErbB receptor subtypes in the spinal dorsal horn. In experiment 2， 30 rats were randomly divided into control group 1， inflammatory pain group 1， and low-， medium-， and high-concentration TX1-85-1 groups， with 6 rats in each group， to observe the effect of inhibiting spinal ErbB3 on inflammatory pain. In experiment 3， 12 rats were randomly divided into control virus group and ErbB3 knockdown virus group， with 6 rats in each group， to observe the effect of knocking down ErbB3 in the spinal dorsal horn on inflammatory pain. In experiment 4， 44 rats were randomly divided into control group 2， inflammatory pain group 2， electroacupuncture group， and sham electroacupuncture group， with 11 rats in each group， to observe the effect of electroacupuncture. In experiment 5， 40 rats were randomly divided into control group 3， inflammatory pain group 3， electroacupuncture group 1， and electroacupuncture + NRG1 group， with 10 rats in each group， to observe the effect of activating ErbB3 on electroacupuncture. A rat model of inflammatory pain was established by subcutaneous injection of 100 μl of complete Freund's adjuvant into the sole of the unilateral hind foot of SD rats. Rats in the low-， medium-， and high-concentration TX1-85-1 groups were intrathecally injected with ErbB3 inhibitor TX1-85-1 on day 5 to day 7 after modeling. Rats in the ErbB3 knockdown virus group were injected with ErbB3 knockdown virus packaged with adenovirus vector-based short hairpin RNA （shRNA） into the spinal dorsal horn in situ 3 weeks before modeling. Rats in each electroacupuncture group received electroacupuncture at bilateral "Zusanli （ST 36）" and "Kunlun （BL 60）" from day 1 to day 7 after modeling， with dense-sparse waves at a frequency of 2 Hz/100 Hz and a current of 0.5-1.5 mA for 30 minutes once a day. Rats in the electroacupuncture + NRG1 group were intrathecally injected with ErbB3 ligand recombinant human neuregulin-1 （NRG1） after electroacupuncture intervention from day 5 to day 7 after modeling. The mechanical withdrawal threshold and thermal withdrawal latency of rats were measured on day 1， 3， 5， and 7 after modeling to evaluate behavior， and Western Blot was used to detect the protein and phosphorylation levels of each ErbB subtype in the spinal dorsal horn. ResultsCompared with the control group， rats in the inflammatory pain group showed decreased mechanical withdrawal threshold and thermal withdrawal latency of rats， and increased expression of phosphorylated ErbB3 （p-ErbB3） protein in the spinal dorsal horn on days 1， 3， 5， and 7 after modeling （P＜0.01）. On day 5 and day 7 after modeling， compared with the inflammatory pain group 1， the mecha-nical withdrawal threshold and thermal withdrawal latency of rats in the medium- and high-concentration TX1-85-1 groups increased， and the expression of p-ErbB3 protein decreased （P＜0.05）. On day 1， 3， 5， and 7 after modeling， compared with the control virus group， the mechanical withdrawal threshold and thermal withdrawal latency of rats in the ErbB3 knockdown virus group increased （P＜0.05）. On day 5 and day 7 after modeling， compared with the inflammatory pain group 2 and the sham electroacupuncture group， the mechanical withdrawal threshold and thermal withdrawal latency of rats in the electroacupuncture group increased， and the expression of p-ErbB3 protein decreased （P＜0.05）. On day 5 and day 7 after modeling， compared with the electroacupuncture + NRG1 group， the mechanical withdrawal threshold and thermal withdrawal latency of rats in the electroacupuncture group 1 increased （P＜0.05）. ConclusionThe p-ErbB3 in the spinal dorsal horn involved in hyperalgesia in rats with inflammatory pain， and electroacupuncture at "Zusanli （ST 36）" and "Kunlun （BL 60）" can alleviate inflammatory pain by inhibiting the expression of p-ErbB3 protein in the spinal dorsal horn of rats.

OBJECTIVE To investigate the effects of Mitoxantrone liposomes （Lipo-MIT） on the proliferation， migration and cancer stem cell （CSCs） stemness of ovarian cancer cells， as well as to explore its mechanism of action based on the phosphoinositide 3-kinase （PI3K）/protein kinase B （AKT） pathway. METHODS The effects of Lipo-MIT on cell proliferation， migration and the stemness characteristics of CSCs were investigated through in vitro experiments. A human ovarian cancer A2780 cells xenograft tumor model of nude mouse was established to explore the effects of Lipo-MIT at doses of 2 and 5 mg/kg on the safety of tumor-bearing mice， as well as in vivo tumor growth and the pathological characteristics of tumor tissues. The influence of Lipo-MIT on the expression levels of PI3K/AKT pathway-related proteins， epithelial-mesenchymal transition related proteins， and stemness related proteins in both cells and tumor tissues was also investigated. RESULTS The half maximal inhibitory concentrations of Lipo-MIT against A2780， SK-OV3， and OV-CAR5 cells were 0.72， 5.41， and 2.77 μmol/L， respectively. Compared with solvent control （0.1% dimethyl sulfoxide）， 0.5-2.5 μmol/L Lipo-MIT significantly reduced the cell colony formation rate， shortened the cell migration distance， decreased the number of migrated cells， down-regulated the protein expression of N-cadherin， up-regulated the protein expression of E-cadherin （P＜0.05）， and also decreased the stem cell sphere formation frequency and down-regulated the protein expression of aldehyde dehydrogenase 1A1 （ALDH1A1） （P＜0.05）. Additionally， 1.0 and 2.5 μmol/L Lipo-MIT significantly reduced the stem cell sphere formation probability and down-regulated the protein expression of sex determining region Y box protein 2 in cells （P＜0.05）. In vivo experimental results demonstrated that 2， 5 mg/kg Lipo-MIT had no significant effects on the body weight， food intake， water intake， and organ （heart， liver， spleen， lung， and kidney） indices of tumor-bearing nude mice （P＞0.05）， but could significantly improve the pathological changes of tumor tissues and remarkably inhibit the protein expressions of N-cadherin， CD133 and ALDH1A1（ only at 5 mg/kg Lipo-MIT）， up-regulate the expression of E- cadherin （only at 5 mg/kg Lipo-MIT） in tumor tissues （P＜0.05）. Lipo-MIT at different concentrations/doses significantly reduced the phosphorylation levels of PI3K and AKT proteins in cells/tumor tissues （P＜0.05）. CONCLUSIONS Lipo-MIT can inhibit the proliferation and migration of ovarian cancer cells and the stemness by suppressing the activity of the PI3K/AKT pathway.

ObjectiveTo develop a standardized living will manual suitable for promotion in China， combining existing literature and the current implementation status of living will both domestically and internationally as well as the characteristics of modern medicine. MethodsA pool of manual entries was constructed through hospital interviews and literature retrieval. A Delphi method expert correspondence was conducted to modify and supplement the manual entry settings. The results of the correspondence were statistically analyzed to verify the reliability and scientific validity of the manual and the correspondence. ResultsThis study constructed a pool of manual entries by conducting interviews in four hospitals in Beijing and retrieving and including 155 pieces of literature，and developed a preliminary version of the manual with a total of 40 entries in four sections， namely medicine， psychology， society， and farewell. The manual items were revised through two rounds of the Delphi method correspondence with a total of 88 experts. The expert response rates in the two rounds of the correspondence questionnaires were 100% and 90%， respectively； the expert authority coefficients were 0.84 and 0.865， respectively； and Kcndall W was 0.141 and 0.077， respectively. In terms of the reliability test， the Cronbach’s α coefficients of the two rounds of correspondence were 0.941 and 0.969， respectively， and the Guttman coefficients were 0.862 and 0.857， respectively. As for the validity test， the Pearson correlation coefficient for 39 entries was R>0.4 in the first round of correspondence， and for 41 entries was R>0.4 in the second round of correspondence； a total of 20 entries in the first round of correspondence had an I-CVI ≥ 0.780， and the scale’s S-CVI was 0.786； a total of 31 entries in the second round of correspondence had an I-CVI ≥ 0.780， and the scale’s S-CVI was 0.846. Meanwhile， this study developed a legal instrument section of the manual including personal information， effective time， modification and revocation， witnesses， and other contents by reviewing relevant laws and regulations both domestically and internationally. ConclusionThe standardized living will manual is comprehensive， reliable， and scientific， which makes it suitable for promotion and further improvement.

Objective To screen ferroptosis genes related to the prognosis of cervical cancer and to construct a prognosis model. Methods Ferroptosis genes were obtained from FerrDb database, and cervical cancer related data were obtained from The Genome-Wide Association Study Catalog database and The Cancer Genome Atlas database. Transcriptome-Wide Association Study, colocalization analysis and differential expression analysis were conducted to screen out candidate ferroptosis genes; Gene Ontology functional and Kyoto Encyclopedia of Genes and Genomes pathway enrichment analysis were conducted on candidate genes. Univariate Cox regression analysis was used to further screen out genes related to the prognosis of cervical cancer. Kaplan-Meier method was used to analyze the relationship between genes and the overall survival of patients. The expression levels of genes in pan-cancer were analyzed through the TIMER database. Two prognostic models were conducted, Model 1 included age and tumor stage, while Model 2 incorporated age, tumor stage, and prognostic genes. The predictive capabilities of the two models were compared. Results A total of 91 candidate genes related to ferroptosis were obtained. Univariate Cox regression analysis showed that 15 genes were associated with the prognosis of cervical cancer. CA9, SCD, TFRC, QSOX1 and CDO1 were risk factors affecting the prognosis of cervical cancer patients (P＜0.05), while PTPN6, ALOXE3, HELLS, IFNG, MIOX, ALOX12B, DUOX1, ALOX15, AQP3 and IDO1 were protective factors (P＜0.05). The mRNA expression levels of the 15 genes showed significant upregulation or downregulation in at least 7 types of cancers, among which TFRC was associated with the largest number of cancer types. Kaplan-Meier analysis showed that HELLS, DUOX1 and ALOXE3 were associated with poor prognosis in cervical cancer. The AUC of the model 1 for predicting 1-year and 3-year overall survival rates of cervical cancer patients was 0.455 and 0.478, and the AUC of Model 2 was 0.854 and 0.595. Model 2 (C-index = 0.727) had better predictive ability than Model 1 (C-index = 0.502). Conclusion The prognostic model composed of 15 prognostic-related genes selected based on bioinformatics has better predictive performance for the survival outcomes of cervical cancer patients, providing important reference value for the prognostic assessment of cervical cancer patients.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

ObjectiveTo investigate the influence of empagliflozin combined with donafenib or lenvatinib on the pharmacokinetic parameters of each drug， and to provide a reference for combined medication in clinical practice. MethodsA total of 48 healthy male Sprague-Dawley rats were divided into 8 groups： empagliflozin group 1 and 2， donafenib group， lenvatinib group， donafenib pretreatment+empagliflozin group， lenvatinib pretreatment + empagliflozin group， empagliflozin pretreatment+donafenib group， and empagliflozin pretreatment+lenvatinib group， with 6 rats in each group. The doses of empagliflozin， donafenib， and lenvatinib were 2.5 mg/kg， 40 mg/kg， and 1.2 mg/kg， respectively. The rats in the empagliflozin group， donafenib group， and lenvatinib group were given a blank solvent by gavage for 7 consecutive days， followed by a single dose of empagliflozin， donafenib， or lenvatinib on day 7 after the administration of the blank solvent； the rats in the pretreatment groups were given the pretreatment drug by gavage for 7 consecutive days， followed by a single dose of drug combination on day 7 after administration of the pretreatment drug. Blood samples were collected at different time points， and plasma was separated to measure the concentration of each drug. A validated ultra-performance liquid chromatography-tandem mass spectrometry method was used to measure the plasma concentrations of donafenib， lenvatinib， and empagliflozin， and a non-compartmental model was used to calculate the main pharmacokinetic parameters of each drug （area under the plasma concentration-time curve ［AUC］， time to peak ［T_max］， peak concentration ［C_max］， and half-life time ［t_1/2］）. The independent-samples t test was used for comparison of normally distributed continuous data between two groups， and the Mann-Whitney U test was used for comparison of non-normally distributed continuous data between two groups. ResultsCompared with the empagliflozin group， the donafenib pretreatment+empagliflozin group had significant increases in the AUC_0-t and AUC_0-∞ of empagliflozin （P=0.011 and 0.008）， while the lenvatinib pretreatment+empagliflozin group had no significant change in the AUC of empagliflozin， with a slightly shorter T_max （P=0.019）. Compared with the donafenib group， the empagliflozin pretreatment+donafenib group had significant increases in the AUC_0-t and AUC_0-∞ of donafenib （P=0.027 and 0.025）， as well as a significant increase in C_max （P=0.015） and significant reductions in CLz/F and Vz/F （P=0.005 and 0.004）； compared with the lenvatinib group， the empagliflozin pretreatment+lenvatinib group had a reduction in the t_1/2 of lenvatinib by approximately 5 hours （P=0.002）， with a trend of reduction in AUC_0-t （P0.05）. ConclusionEmpagliflozin combined with donafenib may alter the pharmacokinetic parameters of both drugs， leading to a significant increase in the exposure levels of both drugs， and efficacy and adverse reactions should be monitored during co-administration. There are no significant changes in the exposure levels of empagliflozin and lenvatinib during co-administration.