Objective: This study aimed to investigate the prevalence and characteristics of impacted teeth (ITs) in orthodontic patients at university dental hospitals in Korea. Methods: This study included 14,774 patients who visited the Department of Orthodontics at 10 university dental hospitals in Korea between 2020 and 2022 and underwent orthodontic diagnosis. The prevalence and characteristics of ITs were investigated using orthodontic diagnostic records, radiographs, and diagnostic casts. Results: The prevalence of ITs, excluding third molar impaction, in Korean orthodontic patients was 13.6% (n = 2,014).The prevalence of ITs in pediatric orthodontic patients was 24.5% (n = 1,614).Of these patients, 68.2% had one IT, 27.5% had two ITs, 24.3% had bilateral IT, and 75.7% had unilateral IT. The most frequent IT was the maxillary canine (50.1%), followed by the mandibular second molar (11.7%), and maxillary second premolar (9.6%). An abnormal eruption path (46.5%) was the most frequent etiology. Orthodontic traction after surgical exposure (70.6%) was the most frequent treatment option. Among the patients with ITs, 29.8% had other dental anomalies, such as tooth agenesis (8.7%), microdontia (8.0%), and supernumerary teeth (5.1%). Furthermore, 50.8% had complications such as cystic lesions (18.3%), transposition (17.7%), and root resorption (14.8%).Among the patients with maxillary canine impaction, 62.2% had labial maxillary canine impaction and 21.1% had palatal maxillary canine impaction. Conclusions The prevalence of ITs in Korean orthodontic patients at university dental hospitals was high, particularly in pediatric orthodontic patients.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Peyronie’s disease is an acquired condition characterized by penile deformities caused by fibrosis of the penile tunica albuginea, leading to symptoms such as penile pain, erectile dysfunction, and other associated issues. Despite extensive research, the pathophysiology of this condition remains poorly understood, and standardized diagnostic and treatment protocols are lacking. While clinical guidelines from several professional societies exist, they do not consistently account for factors such as patient ethnicity, geography, and socioeconomic status. Thus, the Korean Society for Sexual Medicine and Andrology (KSSMA) aimed to develop recommendations tailored to clinical practice in Korea. These recommendations summarize the latest evidence, including clinical practice guidelines from various international professional societies, and represent the consensus opinion of an expert group within the KSSMA. They encompass all aspects of Peyronie’s disease, including the definition, diagnosis, non-surgical interventions, and surgical treatment options.

Objective: The Daegu region experienced the first wave of the pandemic at the beginning of the coronavirus disease 2019 (COVID-19) outbreak in Korea. Other non-COVID-19-related treatments during a community outbreak, such as cardiovascular diseases, were expected to impact emergency departments. In acute myocardial infarctions, time is an important factor affecting the patient outcome. This study examined how community COVID-19 outbreak affected STsegment elevated myocardial infarction (STEMI) care in emergency departments. Methods: A retrospective analysis was performed on patients visiting five emergency departments in the Daegu area who were diagnosed with STEMI from February 18 to April 17 each year from 2018 to 2020. The demographic characteristics, prehospital variables, in-hospital time variables, and treatment results were collected. The cases were divided into the pre-COVID period and the COVID period for comparison. Results: The study included 254 patients (194 pre-COVID, 60 during COVID). The symptom-to-door time did not differ. Although the door-to-first doctor time was shortened (4 min vs. 2 min, P=0.01), the rate of coronary angiogram along with the door-to-angiogram time and the door-to-balloon time did not change. The length of stay in the emergency department was delayed during COVID-19 (median, 136 min vs. 404 min; P<0.01). The in-hospital length of stay and mortality were similar in both groups. Conclusion The time to treat STEMI was not delayed significantly during the first wave of the COVID-19 outbreak in the Daegu area compared with the pre-pandemic period. Mortality did not change. The length of stay was elongated significantly in the emergency department but not in the hospital.

Hydrops fetalis is a condition characterized by excessive fluid accumulation in the fetus, and is classified into immune and non-immune types depending on the underlying disease. Among cases of non-immune hydrops fetalis (NIHF), 15% to 20% are of cardiac origin, and genetic factors such as titin (TTN) gene mutations can contribute to cardiac dysfunction. We report the case of a preterm infant (29+2 weeks, 1,430 g) with hydrops fetalis who developed cardiac tamponade due to major pericardial effusion. Seven hours after birth, the heart rate suddenly decreased, and blood pressure could not be measured. Transthoracic echocardiography revealed substantial pericardial effusion and severely impaired cardiac function, and the preterm infant was diagnosed with pericardial tamponade. Emergency pericardiocentesis was performed, which led to hemodynamic stabilization. Genetic testing identified two heterozygous TTN mutations (c.13898A>T and c.27856G>T), with the latter presumed responsible for the observed cardiac dysfunction. The mother was found to carry the c.13898A>T mutation, but was asymptomatic. This case report highlights the importance of genetic testing in neonates with unexplained NIHF and cardiac complications. Identifying TTN gene mutations provides valuable insights into the underlying pathophysiology and guides clinical management.

Purpose: 11C-Methionine PET/CT is a promising method for detecting parathyroid lesions in patients with primary hyperparathyroidism (PHPT). We aimed to determine the diagnostic ability and correlation of digital 11C-Methionine PET/CT for parathyroid lesions in patients with PHPT, particularly in cases where standard imaging methods yielded inconclusive results. Methods: This retrospective analysis was conducted on patients diagnosed with PHPT who underwent digital 11C-Methionine PET/CT imaging because of ambiguous results on standard imaging work-up ( 99m Tc-MIBI parathyroid scan and/or neck ultrasonography). Quantitative 11C-Methionine PET/CT parameters, including maximum standardized uptake value (SUVmax), mean SUV (SUVmean), peak SUV (SUVpeak), parathyroid methionine volume (PMV), and whole methionine uptake(WMU: PMV multiplied by SUVmean) were calculated with various thresholds, and their correlations with biochemical andpathologic parameters were investigated. Results: This study included 22 consecutive patients (10 men and 12 women) with a median age of 64.0 years. The lesion detection rate and sensitivity of digital 11C-Methionine PET/CT were 81.8% (18/22) and 100.0% (18/18), respectively.Quantitative analysis revealed that serum PTH (r = 0.490, P = 0.039) and serum calcium (r = 0.583, P = 0.011) were signifi-cantly correlated with PMV50%. Conclusion Digital 11C-Methionine PET/CT offers good performance in the detection of parathyroid lesions in PHPT patients with inconclusive standard imaging work-up. The volume parameter of PMV50% significantly correlated biochemi-cal parameters and can serve as a complementary diagnostic tool.

Objective: This study aimed to investigate the prevalence and characteristics of impacted teeth (ITs) in orthodontic patients at university dental hospitals in Korea. Methods: This study included 14,774 patients who visited the Department of Orthodontics at 10 university dental hospitals in Korea between 2020 and 2022 and underwent orthodontic diagnosis. The prevalence and characteristics of ITs were investigated using orthodontic diagnostic records, radiographs, and diagnostic casts. Results: The prevalence of ITs, excluding third molar impaction, in Korean orthodontic patients was 13.6% (n = 2,014).The prevalence of ITs in pediatric orthodontic patients was 24.5% (n = 1,614).Of these patients, 68.2% had one IT, 27.5% had two ITs, 24.3% had bilateral IT, and 75.7% had unilateral IT. The most frequent IT was the maxillary canine (50.1%), followed by the mandibular second molar (11.7%), and maxillary second premolar (9.6%). An abnormal eruption path (46.5%) was the most frequent etiology. Orthodontic traction after surgical exposure (70.6%) was the most frequent treatment option. Among the patients with ITs, 29.8% had other dental anomalies, such as tooth agenesis (8.7%), microdontia (8.0%), and supernumerary teeth (5.1%). Furthermore, 50.8% had complications such as cystic lesions (18.3%), transposition (17.7%), and root resorption (14.8%).Among the patients with maxillary canine impaction, 62.2% had labial maxillary canine impaction and 21.1% had palatal maxillary canine impaction. Conclusions The prevalence of ITs in Korean orthodontic patients at university dental hospitals was high, particularly in pediatric orthodontic patients.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Peyronie’s disease is an acquired condition characterized by penile deformities caused by fibrosis of the penile tunica albuginea, leading to symptoms such as penile pain, erectile dysfunction, and other associated issues. Despite extensive research, the pathophysiology of this condition remains poorly understood, and standardized diagnostic and treatment protocols are lacking. While clinical guidelines from several professional societies exist, they do not consistently account for factors such as patient ethnicity, geography, and socioeconomic status. Thus, the Korean Society for Sexual Medicine and Andrology (KSSMA) aimed to develop recommendations tailored to clinical practice in Korea. These recommendations summarize the latest evidence, including clinical practice guidelines from various international professional societies, and represent the consensus opinion of an expert group within the KSSMA. They encompass all aspects of Peyronie’s disease, including the definition, diagnosis, non-surgical interventions, and surgical treatment options.

Background: The tibiofibular syndesmosis is essential for preserving the stability of the ankle. Acute syndesmotic injuries with evident or latent instability usually warrant surgical interventions. This cadaveric study examines and compares biomechanical characteristics between the following treatments for syndesmosis injuries: suture-button fixation plus syndesmotic repair and screw fixation. Methods: The lower extremities of 10 cadavers disarticulated at the knee joints were used, yielding 20 feet. Ten feet underwent surgery using the suture-button fixation with syndesmotic repair, while the remaining 10 feet underwent surgery using screw fixation. Before surgical treatment of syndesmosis injuries, each cadaveric lower limb underwent preliminary physiological cyclic loading, which was followed by a series of postfixation cyclic loading tests after the surgical procedure. Results: Our principal finding is that suture-button fixation with syndesmotic repair provided torsional strength comparable to that of screw fixation. The mean failure torque did not differ between the 2 groups, but the rotational stiffness was significantly lower in the suture-button fixation/augmentation group. Conclusions Suture-button fixation/augmentation facilitates flexible (physiological) syndesmosis movement and may be a useful alternative treatment for ankle syndesmosis injury.