Objective: To design and establish a new method for flow cytometry-based detection of commonly observed highly expressed antigens on red blood cells, and to further evaluate the differences and distribution characteristics of antigen expression levels between ABO blood type homozygotes and heterozygotes in healthy individuals. Methods: Residual blood samples after donor blood type identification by Shanghai Blood Center in April 2024 were collected. Among them, samples of 19 homozygous and 19 heterozygous individuals of type A and type B were selected. Then the expression level of ABO antigen on red blood cells were detected using the new method established in this study and the traditional aldehyde fixed red blood cell method. Both methods were tested independently three times and the results were compared. Results: The mean values of the three detection results of the new method was (×10 /RBC): AA homozygous 3.3±0.5, AO heterozygous 2.8±0.3, BB homozygous 3.6±0.3, BO heterozygous 3.1±2.8. The mean values of the three detection results of the aldehyde fixation method were AA homozygous 5.9±0.9, AO heterozygous 5.0±1.4, BB homozygous 3.8±0.6, and BO heterozygous 3.3±0.4. The average antigen distribution of each genotype followed a normal distribution. Comparing the average antigen expression levels of homozygotes and heterozygotes, both methods showed that A/B homozygotes had higher antigen levels than heterozygotes, with AA being 1.17 to 1.18 times that of AO and BB being 1.15 to 1.16 times that of BO. Comparing the inter batch differences in the three test results of two methods, the new method showed no significant difference in the three test results for four genotypes (P>0.05). The aldehyde fixation method showed significant differences in the test results for all three genotypes (P<0.01) except for BB homozygotes (P>0.05). The reliability and reproducibility of the new method were better than those of the traditional aldehyde fixation method. Conclusion: The antigen expression level of ABO homozygotes is higher than that of heterozygotes, and the difference in antigen level between type A homozygotes and heterozygotes is slightly higher than that of type B. The new method is superior to traditional aldolization fixation methods.

Animal experiments are widely used in biomedical research for safety assessment, toxicological analysis, efficacy evaluation, and mechanism exploration. In recent years, the ethical review system has become more stringent, and awareness of animal welfare has continuously increased. To promote more efficient and cost-effective drug research and development, the United States passed the Food and Drug Administration (FDA) Modernization Act 2.0 in September 2022, which removed the federal mandate requiring animal testing in preclinical drug research. In April 2025, the FDA further proposed to adopt a series of "new alternative methods" in the research and development of drugs such as monoclonal antibodies, which included artificial intelligence computing models, organoid toxicity tests, and 3D micro-physiological systems, thereby gradually phasing out traditional animal experiment models. Among these cutting-edge technologies, 3D bioprinting models are a significant alternative and complement to animal models, owing to their high biomimetic properties, reproducibility, and scalability. This review provides a comprehensive overview of advancements and applications of 3D bioprinting technology in the fields of biomedical and pharmaceutical research. It starts by detailing the essential elements of 3D bioprinting, including the selection and functional design of biomaterials, along with an explanation of the principles and characteristics of various printing strategies, highlighting the advantages in constructing complex multicellular spatial structures, regulating microenvironments, and guiding cell fate. It then discusses the typical applications of 3D bioprinting in drug research and development,including high-throughput screening of drug efficacy by constructing disease models such as tumors, infectious diseases, and rare diseases, as well as conducting drug toxicology research by building organ-specific models such as those of liver and heart. Additionally,the review examines the role of 3D bioprinting in tissue engineering, discussing its contributions to the construction of functional tissues such as bone, cartilage, skin, and blood vessels, as well as the latest progress in regeneration and replacement. Furthermore, this review analyzes the complementary advantages of 3D bioprinting models and animal models in the research of disease progression, drug mechanisms, precision medicine, drug development, and tissue regeneration, and discusses the potential and challenges of their integration in improving model accuracy and physiological relevance. In conclusion, as a cutting-edge in vitro modeling and manufacturing technology, 3D bioprinting is gradually establishing a comprehensive application system covering disease modeling, drug screening, toxicity prediction, and tissue regeneration.

Animal experiments are widely used in biomedical research for safety assessment, toxicological analysis, efficacy evaluation, and mechanism exploration. In recent years, the ethical review system has become more stringent, and awareness of animal welfare has continuously increased. To promote more efficient and cost-effective drug research and development, the United States passed the Food and Drug Administration (FDA) Modernization Act 2.0 in September 2022, which removed the federal mandate requiring animal testing in preclinical drug research. In April 2025, the FDA further proposed to adopt a series of "new alternative methods" in the research and development of drugs such as monoclonal antibodies, which included artificial intelligence computing models, organoid toxicity tests, and 3D micro-physiological systems, thereby gradually phasing out traditional animal experiment models. Among these cutting-edge technologies, 3D bioprinting models are a significant alternative and complement to animal models, owing to their high biomimetic properties, reproducibility, and scalability. This review provides a comprehensive overview of advancements and applications of 3D bioprinting technology in the fields of biomedical and pharmaceutical research. It starts by detailing the essential elements of 3D bioprinting, including the selection and functional design of biomaterials, along with an explanation of the principles and characteristics of various printing strategies, highlighting the advantages in constructing complex multicellular spatial structures, regulating microenvironments, and guiding cell fate. It then discusses the typical applications of 3D bioprinting in drug research and development,including high-throughput screening of drug efficacy by constructing disease models such as tumors, infectious diseases, and rare diseases, as well as conducting drug toxicology research by building organ-specific models such as those of liver and heart. Additionally,the review examines the role of 3D bioprinting in tissue engineering, discussing its contributions to the construction of functional tissues such as bone, cartilage, skin, and blood vessels, as well as the latest progress in regeneration and replacement. Furthermore, this review analyzes the complementary advantages of 3D bioprinting models and animal models in the research of disease progression, drug mechanisms, precision medicine, drug development, and tissue regeneration, and discusses the potential and challenges of their integration in improving model accuracy and physiological relevance. In conclusion, as a cutting-edge in vitro modeling and manufacturing technology, 3D bioprinting is gradually establishing a comprehensive application system covering disease modeling, drug screening, toxicity prediction, and tissue regeneration.

Climate and land use changes may significantly impact the habitat distribution of Gastrodia elata, an endangered traditional medicinal plant. Accurately predicting its future potential suitable habitats is crucial for its conservation and sustainable development. This study integrates current distribution data of G. elata with 56 environmental variables and uses the MaxEnt model to predict changes in its suitable habitats under current climate conditions and four future climate scenarios(SSP1-2.6, SSP2-4.5, SSP3-7.0, and SSP5-8.5). The results show that October precipitation and December minimum temperature are key environmental factors influencing its distribution. Under the current climate, optimal habitats for G. elata are concentrated in montane forest areas in Sichuan, Yunnan, Guizhou, and Hubei, which meet the species' requirements for understory growth. Across all future scenarios, the suitable habitat of G. elata consistently shows a stable northward shift, with a steady increase in suitable areas, extending to the middle and lower reaches of the Yangtze River and the Huang-Huai region, and even expanding into Liaoning, Jilin, and southern Heilongjiang. Land use analysis, taking into account the protection of arable land and the utilization of forest resources, indicates that by 2100, under future climate conditions, arable land in medium-to high-suitability areas is expected to increase by 30%-124%. While the conversion of non-suitable forest land into suitable habitats is projected to increase by 5%-52%, the growth of medium-to high-suitability areas within forests is relatively modest, ranging from 1% to 24%. These findings highlight the need to balance agricultural expansion with forest resource conservation to ensure the long-term sustainability of G. elata and provide scientific guidance for future suitable habitat management.
Ecosystem ; China ; Climate Change ; Gastrodia/growth & development* ; Conservation of Natural Resources ; Plants, Medicinal/growth & development*

OBJECTIVE: To explore early curative effect of upper joint capsule reconstruction combined with biceps tendon transposition in treating irreparable rotator cuff tears. METHODS: From October 2019 to March 2021, 16 patients with irreparable rotator cuff tear were underwent arthroscopic autogenous semitendinosus tendon transplantation for upper articular capsule reconstruction combined with biceps tendon transposition, included 12 males and 4 females, aged from 53 to 72 years old with an average of (62.13±5.35) years old; 3 patients on the left side and 13 patients on the right side. All patients had preoperatively limited joint mobility, resting pain, and mobility pain, and had a history of failure to respond to conservative treatment for more than 8 months. The duration of preoperative symptoms ranged from 45 to 144 months with an average of (85.25±32.08) months. Visual analogue scale (VAS) of shoulder pain, University of California Los Angeles (UCLA) score, Constant-Murley score, active and passive motion of shoulder joint were compared before operation and 2 years after operation, complications were recorded. RESULTS: All 16 patients were followed up for 21 to 32 months with an average of (24.25±3.57) months. There were no complications such as incision infection, vascular and nerve injury, retear occurred. VAS, UCLA and Constant-Murley scores were improved from (5.75±1.18), (11.88±3.38) and (33.38±9.34) before operation to (1.13±0.89), (32.56±2.71), (89.06±6.25) at 2 years after operation (P<0.05). Anterior flexion, abduction, lateral external rotation and lateral internal rotation of shoulder joint were improved from (79.75±21.36) °, (62.06±10.49) °, (19.19±5.41) °, (3.04±0.21) °, respectively to (156.94±13.18) °, (116.19±12.59) °, (42.63±6.07) °, (8.16±0.64) ° at 2 years after operation. Anterior flexion, abduction, lateral lateral rotation and lateral internal rotation of shoulder joint were improved from (116.28±21.47) °, (107.12±9.67) °, (27.62±4.70) °, (4.21±0.41) °, respectively to (165.28±7.15) °, (153.34±4.69) °, (52.46±4.46) °, (9.68±0.68) ° at 2 years after operation, and the difference was statistically significant (P<0.05). CONCLUSION Arthroscopic autograft of semitendinosus tendon combined with transposition of biceps tendon could achieve satisfactory early clinical results in treating patients with irreparable rotator cuff tear, which is a reliable and effective surgical method.
Humans ; Male ; Female ; Middle Aged ; Aged ; Arthroscopy/methods* ; Rotator Cuff Injuries/physiopathology* ; Plastic Surgery Procedures/methods* ; Range of Motion, Articular ; Shoulder Joint/surgery* ; Tendon Transfer

OBJECTIVE: To explore clinical effect of autologous osteochondral transplantation (AOT) in the treatment of recurrent anterior dislocation of the shoulder joint with glenoid cartilage defect in rabbits by establishing a model of recurrent anterior dislocation of the shoulder joint with < 20% glenoid cartilage defect in rabbits. METHODS: Twenty-four male New Zealand white rabbits, aged 6-month-old, weighed (2.69±0.17) kg were selected. The labrum of shoulder joint of rabbits was artificially destroyed to establish a model of recurrent anterior dislocation of shoulder joint with cartilage defect. They were divided into AOT surgery group and simple suture group, with 12 rabbits in each group. AOT group were underwent AOT surgery, while simple suture group was treated with simple Bankart suture for recurrent shoulder joint dislocation. At 6 and 12 weeks after operation, 6 rabbits between two groups were sacrificed for sampling. The dietary conditions, activity conditions, mental states of rabbits and healing conditions of grafts in the specimens were observed and compared between two groups. HE staining was used to observe cell creep, cell morphology, inflammatory cell infiltration, fibrochondrocytes and their arrangement. Masson staining was used to observe the formation and arrangement of collagen fibers; Safrane-green staining was used to observe the regeneration of articular cartilage, subchondral bone and bone tissue. Bone mineral density (BMD), bone volume (BV) and trabecular thickness (Tb.Th) between two groups were measured by Micro-CT to evaluate the remodeling of shoulder glenoid bone defects by autologous osteochondral cartilage. RESULTS: After different surgical interventions were carried out in both groups of rabbits, at 6 weeks after the operation, the abduction, extension, internal rotation and external rotation of the shoulder joint on the operated side showed limited range of motion compared with the contralateral side, while adduction and forward flexion showed no obvious abnormalities compared with the contralateral side. At 12 weeks after operation, the range motion of tshoulder joints in both groups of rabbits had returned to the state before modeling. The effects of HE staining, Masson staining and safrane-green staining at 12 weeks after operation in both groups were stronger than the staining results at 6 weeks after operation. Moreover, the results of HE staining, Masson staining and safranin fixation green staining in AOT group at 6 and 12 weeks after operation were all higher than those in simple suture group. Micro-CT scan results at 6 and 12 weeks after operation showed that BMD (0.427±0.014), (0.466±0.032) g·cm-3, BV(116.171±3.527), (159.327±3.500) mm3, and Tb.Th (0.230±0.006), (0.285±0.009) mm in AOT group, which were higher than those of simple suture group in BMD(0.358±0.011), (0.384±0.096) g·cm-3, BV(72.657±3.903), (118.713±3.860) mm3, and Tb.Th(0.204±0.009), (0.243±0.007) mm;and the differences were statistically significant (P<0.05). CONCLUSION AOT procedure could effectively promote osteogenesis and fibrocartilage regeneration in the cartilage defect area of the shoulder glenoid <20%, which is conducive to reshaping the structure of the shoulder glenoid.
Animals ; Rabbits ; Male ; Transplantation, Autologous ; Cartilage, Articular/injuries* ; Shoulder Dislocation/physiopathology* ; Bone Transplantation ; Shoulder Joint/surgery*

PURPOSE: Assessing fluid responsiveness relying on central venous oxygen saturation (ScvO₂) yields varied outcomes across several studies. This study aimed to determine the ability of the change in ScvO₂ (ΔScvO₂) to detect fluid responsiveness in ventilated septic shock patients and potential influencing factors. METHODS: In this prospective, single-center study, all patients conducted from February 2023 to January 2024 received fluid challenge. Oxygen consumption was measured by indirect calorimetry, and fluid responsiveness was defined as an increase in cardiac index (CI) ≥ 10% measured by transthoracic echocardiography. Multivariate linear regression analysis was conducted to evaluate the impact of oxygen consumption, arterial oxygen saturation, CI, and hemoglobin on ScvO₂ and its change before and after fluid challenge. The Shapiro-Wilk test was used for the normality of continuous data. Data comparison between fluid responders and non-responders was conducted using a two-tailed Student t-test, Mann Whitney U test, and Chi-square test. Paired t-tests were used for normally distributed data, while the Wilcoxon signed-rank test was used for skewed data, to compare data before and after fluid challenge. RESULTS: Among 49 patients (31 men, aged (59 ± 18) years), 27 were responders. The patients had an acute physiology and chronic health evaluation II score of 24 ± 8, a sequential organ failure assessment score of 11 ± 4, and a blood lactate level of (3.2 ± 3.1) mmol/L at enrollment. After the fluid challenge, the ΔScvO₂ (mmHg) in the responders was greater than that in the non-responders (4 ± 6 vs. 1 ± 3, p = 0.019). Multivariate linear regression analysis suggested that CI was the only independent influencing factor of ScvO₂, with R² = 0.063, p = 0.008. After the fluid challenge, the change in CI became the only contributing factor to ΔScvO₂ (R² = 0.245, p < 0.001). ΔScvO₂ had a good discriminatory ability for the responders and non-responders with a threshold of 4.4% (area under the curve = 0.732, p = 0.006). CONCLUSION ΔScvO₂ served as a reliable surrogate marker for ΔCI and could be utilized to assess fluid responsiveness, given that the change in CI was the sole contributing factor to the ΔScvO₂. In stable hemoglobin conditions, the absolute value of ScvO₂ could serve as a monitoring indicator for adequate oxygen delivery independent of oxygen consumption.
Humans ; Shock, Septic/blood* ; Male ; Female ; Middle Aged ; Prospective Studies ; Oxygen Saturation ; Aged ; Fluid Therapy ; Oxygen/blood* ; Oxygen Consumption ; Adult

This article reports the clinical characteristics and treatment processes of three cases of mucormycosis occurring after hematopoietic stem cell transplantation in children, along with a review of relevant literature. All three patients presented with chest pain as the initial symptom, and metagenomic next-generation sequencing (mNGS) confirmed the mucycete infection early in all cases. Two patients recovered after treatment, while one succumbed to disseminated infection. mNGS has facilitated early diagnosis and treatment, reducing mortality rates. Additionally, surgical intervention is an important strategy for improving the prognosis of this condition.
Humans ; Hematopoietic Stem Cell Transplantation/adverse effects* ; Mucormycosis/etiology* ; Male ; High-Throughput Nucleotide Sequencing/methods* ; Child ; Female ; Metagenomics ; Child, Preschool

BACKGROUND: Hemorrhagic stroke (HS) is associated with significant disability and mortality. However, the relationship between meteorological factors and hemorrhagic stroke, as well as the potential moderating role of these factors, remains unclear. METHODS: Daily data on HS, air pollution, and meteorological conditions were collected from January 2015 to December 2021 in Ganzhou to analyze the relationship between meteorological factors and HS admissions. This analysis employed a time-stratified case-crossover design in conjunction with a distributional lag nonlinear model. Additionally, a bivariate response surface modelling was utilized to further investigate the interaction between meteorological factors and particulate matter. The study also stratified the analyses by gender and age. To investigate the potential impact of extreme weather conditions on HS, this study defined the 97.5th percentile as representing extremely high weather conditions, while the 2.5th percentile was classified as extremely low. RESULTS: In single-day lags, the risk of admissions for HS was significantly associated with extremely low temperature (lag 1-2 and lag 13-14), extremely low humidity (lag 1 and lag 9-12), and extremely high precipitation (lag 2-7). Females exhibited greater susceptibility to extremely low temperature than males within the single-day lag pattern in the subcomponent layer, with a maximum relative risk (RR) that was 7% higher. In the cumulative lag analysis, the risk of HS admissions was significantly associated with extremely high temperature (lag 0-8∼lag 0-14), extremely low humidity (lag 0-2∼lag 0-14), and extremely high precipitation (lag 0-4∼lag 0-14). Within the cumulative lag day structure of the subcomponent layer, both extremely low and extremely high temperature had a more pronounced effect on females and aged ≥65 years. The risk of HS admissions was positively associated with extremely high barometric pressure in the female subgroups (lag 0-1 and lag 0-2). The highest number of HS admissions occurred when high PM_2.5 concentrations coexisted with low precipitation. CONCLUSIONS Meteorological factors were significantly associated with the risk of hospital admissions for HS. Individuals who were female and aged ≥65 years were found to be more susceptible to these meteorological influences. Additionally, an interaction was observed between airborne particulate matter and meteorological factors. These findings contributed new evidence to the association between meteorological factors and HS.
China/epidemiology* ; Humans ; Female ; Male ; Aged ; Middle Aged ; Cross-Over Studies ; Hospitalization/statistics & numerical data* ; Adult ; Hemorrhagic Stroke/etiology* ; Meteorological Concepts ; Weather ; Particulate Matter/analysis* ; Air Pollution/adverse effects* ; Environmental Exposure/adverse effects* ; Aged, 80 and over ; Young Adult