Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

OBJECTIVE: To evaluate the safety and effectiveness of robot-assisted percutaneous coronary intervention (R-PCI) compared to traditional manual percutaneous coronary intervention (M-PCI). METHODS: This prospective, multicenter, randomized controlled, non-inferior clinical trial enrolled patients with coronary heart disease who met the inclusion criteria and had indications for elective percutaneous coronary intervention. Participants were randomly assigned to either the R-PCI group or the M-PCI group. Primary endpoints were clinical and technical success rates. Clinical success was defined as visually estimated residual post-percutaneous coronary intervention stenosis < 30% with no 30-day major adverse cardiac events. Technical success in the R-PCI group was defined as successful completion of percutaneous coronary intervention using the ETcath200 robot-assisted system, without conversion to M-PCI in the event of a guidewire or balloon/stent catheter that was unable to cross the vessel or was poorly supported by the catheter. Secondary endpoints included total procedure time, percutaneous coronary intervention procedure time, fluoroscopy time, contrast volume, operator radiation exposure, air kerma, and dose-area product. RESULTS: The trial enrolled 152 patients (R-PCI: 73 patients, M-PCI: 79 patients). Lesions were predominantly B2/C type (73.6%). Both groups achieved 100% clinical success rate. No major adverse cardiac events occurred during the 30-day follow-up. The R-PCI group had a technical success rate of 100%. The R-PCI group had longer total procedure and fluoroscopy times, but lower operator radiation exposure. The percutaneous coronary intervention procedure time, contrast volume, air kerma, and dose-area product were similar between the two groups. CONCLUSIONS For certain complex lesions, performing percutaneous coronary intervention using the ETcath200 robot-assisted system is safe and effective and does not result in conversion to M-PCI.

Objective To explore the application value of low-flow rate and-contrast injection scheme for pulmonary artery computed tomography angiography(CTA)in the elderly patients.Methods Sixty elderly patients undergoing pulmonary artery CTA in some hospital from April 2020 to January 2023 were selected and divided into a control group(30 cases)and an experimental group(30 cases)according to the contrast agent injection schemes.A conventional contrast injection scheme was used for the control group,and an optimized contrast injection scheme with low flow rate and low contrast dose was designed for the experimental group.The two gorups were observed and subjectively scored in terms of the degree of pulmonary artery enhancement,the display of pulmonary artery trunks and branches and the sharpness of image vessel edges,and objectively evaluated for the degree of contrast sclerosis artifacts in the superior vena cava and the enhancement CT values of the pulmonary artery trunks and the left and the right pulmonary veins.The extravasation of the contrast agent was recorded for the patients in the 2 groups.SPSS 25.0 software was used for statistical analysis.Results The two groups had no significant differences in score pulmonary artery CTA image quality(P＞0.05);the experimental group had the socre of contrast sclerosis artifacts in the superior vena cava statistically lower than that of the control group(P＜0.05).The two groups had no obvious differences in the CT values of the pulmonary artery trunks and the left and the right pulmonary veins(P＞0.05).There were no patients with the extravasation of the contrast agent found in the experimental group,while there one case with severe extravasation and 4 cases with mild or moderate extravasation in the control group.Conclusion Low-flow rate and-contrast injection scheme for pulmonary artery CTA of the elderly patients contributes to avoiding contrast agent extrava-sation while ensuring image quality,enhancing patient experience and safety.[Chinese Medical Equipment Journal,2024,45(10):66-70]

Objective To investigate the nutritional status of children with cystic fibrosis(CF)and understand the correlation between malnutrition and clinical characteristics as well as lung function.Methods A retrospective analysis was performed on clinical data of CF children admitted from January 2016 to June 2023.Clinical characteristics of CF children with different nutritional statuses were compared,and the correlation between malnutrition and lung function was analyzed.Results A total of 52 CF children were included,comprising 25 boys(48％)and 27 girls(52％),aged between 7 months and 17 years.Respiratory symptoms were the predominant clinical manifestations(96％,50/52).The prevalence of malnutrition was 65％(34/52),with moderate/severe malnutrition being the most common(65％,22/34).The malnutrition group had a longer duration of illness,higher proportion of digestive system symptoms,and lower levels of serum albumin(P＜0.05).Pulmonary function parameters,including forced expiratory volume in one second as a percentage of the predicted value,ratio of forced expiratory volume in one second to forced vital capacity,forced expiratory flow at 25％of forced vital capacity exhaled,forced expiratory flow at 50％of forced vital capacity exhaled,forced expiratory flow at 75％of forced vital capacity exhaled,and maximum mid-expiratory flow as a percentage of the predicted value,were lower in the malnutrition group compared to the normal nutrition group(P＜0.05).Correlation analysis showed body mass index Z-score was positively correlated with the above six pulmonary function parameters(P＜0.05).Conclusions The prevalence of malnutrition is high in CF children and is associated with decreased lung function.CF children with higher body mass index have better lung function.Therefore,screening and evaluation of nutritional status as well as appropriate nutritional intervention should be emphasized in CF children.[Chinese Journal of Contemporary Pediatrics,2024,26(3):275-281]

OBJECTIVE To evaluate the cost-effectiveness of trastuzumab biosimilars （Hanquyou） versus original drug （Hesaiting） in the treatment of recurrent/metastatic human epidermal growth factor receptor-2 （HER-2） positive breast cancer. METHODS A partitional survival model was constructed based on the NCT03084237 trial data. The simulation period was 3 weeks， and the simulation time was 10 years. Using costs and quality-adjusted life year （QALY） as the output indicator， the cost- utility analysis method was used to evaluate the cost-effectiveness of the two schemes mentioned above. Univariate and probabilistic sensitivity analyses were performed to verify the robustness of the basic analysis. RESULTS The costs of the trastuzumab biosimilars group and original drug group were 111 516.72 yuan and 111 122.30 yuan respectively， with health utility values of 1.52 QALYs and 1.36 QALYs， and ICER of 2 465.12 yuan/QALY， which were less than 3 times China’s per capita gross domestic product （GDP） in 2023 as the threshold for willingness-to-pay （WTP） （268 200 yuan/QALY）. Univariate sensitivity analysis showed that the cost of the trastuzumab biosimilars and original drug had a great impact on the ICER. The probabilistic sensitivity analysis showed that the probability of trastuzumab biosimilars being cost-effective was 100% at WTP threshold of 14 902 yuan/QALY. CONCLUSIONS When WTP threshold is 3 times China’s GDP in 2023 （268 200 yuan/QALY）， compared with original drug， trastuzumab biosimilars have good cost-effectiveness in the treatment of recurrent/metastatic HER-2 positive breast cancer.