Purpose: This study aimed to report the results of Korean Antimicrobial Resistance Monitoring System (KARMS) for uncomplicated cystitis (UC) in 2023. Materials and Methods: KARMS was established for the surveillance of antimicrobial resistance in urinary tract infections with the cooperation of Korean nationwide medical centers. Data from patients with UC have been collected in the web-based KARMS database. Demographic data, uropathogen distribution, and antimicrobial susceptibility of representative pathogens were analyzed. Results: A total of 885 patients’ data were collected in KARMS database. The mean patient age was 56.39±18.26 years. The number of postmenopausal and recurrent cystitis were 530 (61.1%) and 102 (11.5%), respectively. Escherichia coli was the most frequently identified uropathogen (654/871, 75.1%). Regarding antimicrobial susceptibility, 94.9% were susceptible to fosfomycin, 90.5% to nitrofurantoin, 58.4% to ciprofloxacin, 83.6% to cefotaxime, and 100.0% to ertapenem. ESBL positivity was 13.7% (96/702), and significantly higher in tertiary hospital (23.1%, p<0.001), postmenopausal (15.9%, p=0.044), and recurrent cystitis (24.7%, p=0.001).Fluoroquinolone resistance was significantly higher in tertiary hospital (47.4%, p=0.001), postmenopausal (44.9%, p<0.001), and recurrent cystitis (59.8%, p<0.001). In addition, postmenopausal (odds ratio [OR] 1.96, 95% confidence interval [CI] 1.38–2.77, p<0.001) and recurrent cystitis (OR 2.37, 95% CI 1.44–3.92, p=0.001) were associated with increased fluoroquinolone resistance. Conclusions These data provide information on the distribution of uropathogen and the status of antimicrobial resistance in UC of South Korea. In addition, KARMS will be a useful reference in the future through the continuous surveillance system construction over the years.

Background: The tibiofibular syndesmosis is essential for preserving the stability of the ankle. Acute syndesmotic injuries with evident or latent instability usually warrant surgical interventions. This cadaveric study examines and compares biomechanical characteristics between the following treatments for syndesmosis injuries: suture-button fixation plus syndesmotic repair and screw fixation. Methods: The lower extremities of 10 cadavers disarticulated at the knee joints were used, yielding 20 feet. Ten feet underwent surgery using the suture-button fixation with syndesmotic repair, while the remaining 10 feet underwent surgery using screw fixation. Before surgical treatment of syndesmosis injuries, each cadaveric lower limb underwent preliminary physiological cyclic loading, which was followed by a series of postfixation cyclic loading tests after the surgical procedure. Results: Our principal finding is that suture-button fixation with syndesmotic repair provided torsional strength comparable to that of screw fixation. The mean failure torque did not differ between the 2 groups, but the rotational stiffness was significantly lower in the suture-button fixation/augmentation group. Conclusions Suture-button fixation/augmentation facilitates flexible (physiological) syndesmosis movement and may be a useful alternative treatment for ankle syndesmosis injury.

Background/Aims: Proprotein-converting enzyme subtilisin-kexin type 9 (PCSK9) inhibitors act more promptly and efficiently than statins and reduce the risk of cardiovascular events in patients with acute coronary syndrome (ACS). This study aimed to assess the short-term effects of perioperative administration of a single-dose PCSK9 inhibitor in patients with ACS. Methods: This study included 789 consecutive patients undergoing percutaneous coronary intervention (PCI) for ACS. The primary clinical endpoint was the occurrence of major adverse cardiovascular events (MACEs) within one month, including cardiac death, non-fatal myocardial infarction, unanticipated revascularization, stroke, stent thrombosis, and rehospitalization for ischemic causes or heart failure. Results: PCSK9 inhibitors were administered to 201 of 789 patients. MACEs occurred in eight patients (4.0%) in the treated group and 60 patients (10.2%) in the non-treated group for one month (hazard ratio 0.38, 95% confidence interval 0.18 to 0.80, p = 0.010). The benefit of PCSK9 inhibitors in terms of MACEs was greater in the subgroup of patients treated more than 1 hour before PCI than in the subgroup treated less than 1 hour before PCI or treated after PCI and in the non-treated group. Conclusions In patients undergoing PCI for ACS, the risk of MACEs was lower in those treated with perioperative single-dose PCSK9 inhibitors than in those in the untreated group. This benefit was especially noticeable in the subgroups treated > 1 hour before PCI than in those treated less than 1 hour before PCI or after PCI, regardless of the clinical presentation of ACS.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Background/Aims: Proprotein-converting enzyme subtilisin-kexin type 9 (PCSK9) inhibitors act more promptly and efficiently than statins and reduce the risk of cardiovascular events in patients with acute coronary syndrome (ACS). This study aimed to assess the short-term effects of perioperative administration of a single-dose PCSK9 inhibitor in patients with ACS. Methods: This study included 789 consecutive patients undergoing percutaneous coronary intervention (PCI) for ACS. The primary clinical endpoint was the occurrence of major adverse cardiovascular events (MACEs) within one month, including cardiac death, non-fatal myocardial infarction, unanticipated revascularization, stroke, stent thrombosis, and rehospitalization for ischemic causes or heart failure. Results: PCSK9 inhibitors were administered to 201 of 789 patients. MACEs occurred in eight patients (4.0%) in the treated group and 60 patients (10.2%) in the non-treated group for one month (hazard ratio 0.38, 95% confidence interval 0.18 to 0.80, p = 0.010). The benefit of PCSK9 inhibitors in terms of MACEs was greater in the subgroup of patients treated more than 1 hour before PCI than in the subgroup treated less than 1 hour before PCI or treated after PCI and in the non-treated group. Conclusions In patients undergoing PCI for ACS, the risk of MACEs was lower in those treated with perioperative single-dose PCSK9 inhibitors than in those in the untreated group. This benefit was especially noticeable in the subgroups treated > 1 hour before PCI than in those treated less than 1 hour before PCI or after PCI, regardless of the clinical presentation of ACS.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Background/Aims: Proprotein-converting enzyme subtilisin-kexin type 9 (PCSK9) inhibitors act more promptly and efficiently than statins and reduce the risk of cardiovascular events in patients with acute coronary syndrome (ACS). This study aimed to assess the short-term effects of perioperative administration of a single-dose PCSK9 inhibitor in patients with ACS. Methods: This study included 789 consecutive patients undergoing percutaneous coronary intervention (PCI) for ACS. The primary clinical endpoint was the occurrence of major adverse cardiovascular events (MACEs) within one month, including cardiac death, non-fatal myocardial infarction, unanticipated revascularization, stroke, stent thrombosis, and rehospitalization for ischemic causes or heart failure. Results: PCSK9 inhibitors were administered to 201 of 789 patients. MACEs occurred in eight patients (4.0%) in the treated group and 60 patients (10.2%) in the non-treated group for one month (hazard ratio 0.38, 95% confidence interval 0.18 to 0.80, p = 0.010). The benefit of PCSK9 inhibitors in terms of MACEs was greater in the subgroup of patients treated more than 1 hour before PCI than in the subgroup treated less than 1 hour before PCI or treated after PCI and in the non-treated group. Conclusions In patients undergoing PCI for ACS, the risk of MACEs was lower in those treated with perioperative single-dose PCSK9 inhibitors than in those in the untreated group. This benefit was especially noticeable in the subgroups treated > 1 hour before PCI than in those treated less than 1 hour before PCI or after PCI, regardless of the clinical presentation of ACS.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.