Objective To compare the efficacy and safety of transurethral blue laser vaporization of the prostate, transurethral resection of the prostate (TURP) or plasmakinetic resection of the prostate in the treatment of benign prostatic hyperplasia (BPH). Methods The domestic and foreign clinical studies on transurethral blue laser vaporization of the prostate (observation group), TURP or plasmakinetic resection of the prostate (control group) in the treatment of BPH during Jan. 2015 and Mar. 2025 were retrieved. The data were extracted with Cochrane systematic review method. The operation time, decrease in hemoglobin, bladder irrigation time, catheter indwelling time, total complication rate, retrograde ejaculation rate and urinary incontinence rate of the two groups were compared with RevMan 5.3.0 statistical software. Results A total of 5 Chinese studies involving 491 patients (248 in the observation group and 243 in the control group) were included in the Meta-analysis. Compared with the control group, the observation group had shorter operation time [MD=-20.80, 95%CI:-26.88—-14.72, P＜0.00001], less decrease in hemoglobin [MD=-10.61, 95%CI: -20.21—-1.01, P=0.03], shorter bladder irrigation time [MD=-17.85, 95%CI: -32.62—-3.09, P=0.002], shorter catheter indwelling time [MD=-1.71, 95%CI: -2.81—- 0.62, P=0.002], lower total complication rate [OR=0.11, 95%CI: 0.06—0.21, P＜0.00001], lower retrograde ejaculation rate [OR=0.05, 95%CI: 0.02—0.16, P＜0.00001] and lower urinary incontinence rate [OR=0.24, 95%CI: 0.07—0.79, P=0.02]. There were no significant differences in other complications between the two groups (P＞0.05). The international erectile function score (IIEF-5) of the observation group was significantly higher than that of the control group [MD=1.87, 95%CI:1.16—2.57, P＜0.00001]. There were no significant differences in international prostate symptom score (IPSS), maximum urinary flow rate (Qmax) and post-voiding residual (PVR) between the two groups (P＞0.05). Conclusion All three surgical procedures can effectively improve the lower urinary tract symptoms of BPH patients. Compared with TURP or plasmakinetic resection of the prostate, transurethral blue laser vaporization of the prostate has obvious advantages in terms of perioperative recovery, reduction of total complications, urinary incontinence and retrograde ejaculation rates, and preservation of sexual function.

BACKGROUND:Based on the principle of vertical tooth movement,a personalized orthodontic appliance is created through digital design combined with 3D printing,so that the personalized orthodontic appliance forms a support system with the individual incisors.With the help of the absolute support of the micro-implant,the single tooth is precisely controlled in a three-dimensional direction.OBJECTIVE:To design personalized orthodontic appliances with 11,12,21,and 22 intrusion and extrusion based on biomechanical principles,and analyze the safety of the personalized orthodontic appliances in terms of their movement effect on the teeth by means of the three-dimensional finite element method.METHODS:Three-dimensional finite element models of alveolar bone-periodontium-maxillary incisors-personalized cantilever micro-implant-connecting plates-personalized brackets in the maxillary anterior region(teeth numbers 11,12,21,and 22)were established using Mimics,Geomagic Wrap,SolidWorks,and Ansys Workbench software,respectively.Personalized orthodontic appliances with low pressure movement and extended movement were set up at each tooth position.The stress level of each component of the personalized orthodontic appliances was analyzed,and the tooth displacement and periodontal stress distribution were calculated under loading of 300 g tensile or thrust force.RESULTS AND CONCLUSION:(1)The maximum equivalent force on the personalized intrusion mobile orthodontic appliance was 162.90 MPa,and the maximum equivalent force on the personalized extrusion mobile orthodontic appliance was 239.57 MPa.The maximum equivalent stress on both devices was located in the vertical portion of the personalized bracket loading attachment.The equivalent stresses on each part of the personalized orthodontic appliance were all within the yield strength,and they had good safety.(2)The initial displacement of the teeth under the action of the personalized orthodontic appliances showed a tendency towards overall intrusion or extrusion,with the displacement in the vertical direction far exceeding that in the horizontal and sagittal directions.The equivalent stress peak appeared at the root tip or neck of the periodontal membrane,and the equivalent stress concentration area appeared in the periodontal membrane of the root apical region.(3)The results show that the personalized orthodontic appliance allows 11,12,21,and 22 to approximate either intrusion movement or extrusion movement,initially confirming the effectiveness of the personalized vertical movement orthodontic appliance.

SPF chickens were immunized with HN-mRNA vaccine by intramuscular injection.He-magglutination inhibition(HI)test,lymphocyte proliferation test,RT-qPCR and pathological sec-tions were used to evaluate the humoral and cellular immunity and protection against challenge in-duced by the candidate HN-mRNA vaccine.The results showed that 2.5,5.0,and 7.5 μg HN-mR-NA induced HI antibody antibodies in a dose-dependent manner.Among them,the Hi antibody in-duced by 7.5 μg HN-mRNA was slightly higher than that of the weak toxic vaccine(La Sota strain).In addition,in response to the stimulation of inactivated NDV virus,the proliferation and activation of lymphocytes in 2.5,5.0 and 7.5 μg HN-mRNA immunization groups and commercial vaccine group were observed.To further evaluate the antiviral protection provided by HN mRNA immunization,the 105 ELD50 NDV strong strain NA-1 was used to attack the 7.5 μg HN-mRNA immunised group and the commercial weakened vaccine(La Sota strain)and PBS groups using na-sal and ocular drops.The results showed that the survival rate of 7.5 μg HN-mRNA immunization group and commercial vaccine group was 100％,and these vaccines could protect tissues and or-gans from the damage caused by virus infection.At the same time,7.5 μg HN-mRNA and commer-cial vaccine could shorten the time of virus shedding in vitro and the viral load in vivo.This study provides a foundational framework for the clinical application of NDV HN mRNA candidate vac-cines and offers insights for the development of novel mRNA vaccines for poultry.

Aim To investigate the effect of triptolide(TP)on corticosterone(CORT)-induced depression-like behaviors in mice and explore the antidepressant mechanism of TP based on the CREB/BDNF/TrkB sig-naling pathway.Methods Sixty 8-week-old male C57BL/6J mice were randomly divided into five groups:control group,CORT group,TP groups of low and high doses(10,30 μg·kg-1),and fluoxetine(FLU)group(10 mg·kg-1).Except for the control group,the other groups received subcutaneous injec-tions of CORT for three consecutive weeks to establish the model of depression.During the last two weeks of modeling,normal saline,TP and FLU were adminis-tered via intraperitoneal injection respectively.After the administration,depression-like behaviors in mice were assessed using forced swimming test,tail suspen-sion test,and sucrose preference test.Biochemical methods were used to measure the levels of SOD and MDA in the hippocampus and prefrontal cortex(PFC).Cell apoptosis was detected by TUNEL meth-od.Immunohistochemistry,immunofluorescence,and Western blotting were employed to detect the expres-sion of apoptosis/autophagy-related proteins,synaptic structure markers,and proteins related to the CREB/BDNF/TrkB signaling pathway.Results TP signifi-cantly ameliorated CORT-induced depression-like be-haviors in mice,mainly manifested by reduced immo-bility time in the tail suspension test and forced swim-ming test,and increased sucrose preference rate.TP alleviated CORT-induced oxidative stress by increasing SOD levels and reducing MDA production in brain tis-sue.Additionally,TP also inhibited apoptosis and ex-cessive autophagy of neurons in the hippocampus and prefrontal cortex,maintained synaptic plasticity,and significantly upregulated the expression of p-CREB,BDNF,and TrkB.Conclusions TP exhibits potential antidepressant effect in mice by upregulating the CREB/BDNF/TrkB signaling pathway,reducing oxida-tive stress,inhibiting excessive neuronal apoptosis and autophagy,and improving synaptic plasticity.

BACKGROUND:In orthodontic treatment,full-mouth treatment is usually used to treat single-root severely twisted teeth,and single-tooth treatment is less common.OBJECTIVE:To design a personalized orthodontic device based on biomechanical principles to address the rotation of teeth 11,12,13,21,22,and 23,and evaluate the device's impact on tooth movement using three-dimensional finite element method.METHODS:Based on the biomechanical principle of tooth rotation and movement,a personalized orthodontic device was made by digital design combined with three-dimensional printing,so that the personalized orthodontic device and the tooth formed an anchorage system.The absolute anchorage of the micro-implant was used to precisely control the single-root twisted tooth in the three-dimensional direction.The CBCT data of the maxillary alveolar bone and tooth tissue of a female volunteer were collected.The three-dimensional finite element models of the twisted tooth-periodontal ligament-maxillary bone-personalized orthodontic device were established using Mimics,Geomagic Wrap,SolidWorks,3-matic Research 15.0,and Ansys Workbench software.The equivalent stress distribution characteristics of the personalized orthodontic device,the movement trend of the tooth,and the equivalent stress distribution characteristics of the periodontal ligament were calculated under a thrust of 60 g.RESULTS AND CONCLUSION:(1)The maximum equivalent stress observed on the personalized orthodontic device was 47.71 MPa.(2)The initial tooth displacement under the device demonstrated a rotational trend.The peak equivalent stress in the periodontal ligament was concentrated at the neck,while lower stress was observed in the apex region.(3)The safety and feasibility of the personalized orthodontic device designed in this study for severely rotated single-rooted teeth were preliminarily verified through finite element analysis.

SPF chickens were immunized with HN-mRNA vaccine by intramuscular injection.He-magglutination inhibition(HI)test,lymphocyte proliferation test,RT-qPCR and pathological sec-tions were used to evaluate the humoral and cellular immunity and protection against challenge in-duced by the candidate HN-mRNA vaccine.The results showed that 2.5,5.0,and 7.5 μg HN-mR-NA induced HI antibody antibodies in a dose-dependent manner.Among them,the Hi antibody in-duced by 7.5 μg HN-mRNA was slightly higher than that of the weak toxic vaccine(La Sota strain).In addition,in response to the stimulation of inactivated NDV virus,the proliferation and activation of lymphocytes in 2.5,5.0 and 7.5 μg HN-mRNA immunization groups and commercial vaccine group were observed.To further evaluate the antiviral protection provided by HN mRNA immunization,the 105 ELD50 NDV strong strain NA-1 was used to attack the 7.5 μg HN-mRNA immunised group and the commercial weakened vaccine(La Sota strain)and PBS groups using na-sal and ocular drops.The results showed that the survival rate of 7.5 μg HN-mRNA immunization group and commercial vaccine group was 100％,and these vaccines could protect tissues and or-gans from the damage caused by virus infection.At the same time,7.5 μg HN-mRNA and commer-cial vaccine could shorten the time of virus shedding in vitro and the viral load in vivo.This study provides a foundational framework for the clinical application of NDV HN mRNA candidate vac-cines and offers insights for the development of novel mRNA vaccines for poultry.

BACKGROUND:In orthodontic treatment,full-mouth treatment is usually used to treat single-root severely twisted teeth,and single-tooth treatment is less common.OBJECTIVE:To design a personalized orthodontic device based on biomechanical principles to address the rotation of teeth 11,12,13,21,22,and 23,and evaluate the device's impact on tooth movement using three-dimensional finite element method.METHODS:Based on the biomechanical principle of tooth rotation and movement,a personalized orthodontic device was made by digital design combined with three-dimensional printing,so that the personalized orthodontic device and the tooth formed an anchorage system.The absolute anchorage of the micro-implant was used to precisely control the single-root twisted tooth in the three-dimensional direction.The CBCT data of the maxillary alveolar bone and tooth tissue of a female volunteer were collected.The three-dimensional finite element models of the twisted tooth-periodontal ligament-maxillary bone-personalized orthodontic device were established using Mimics,Geomagic Wrap,SolidWorks,3-matic Research 15.0,and Ansys Workbench software.The equivalent stress distribution characteristics of the personalized orthodontic device,the movement trend of the tooth,and the equivalent stress distribution characteristics of the periodontal ligament were calculated under a thrust of 60 g.RESULTS AND CONCLUSION:(1)The maximum equivalent stress observed on the personalized orthodontic device was 47.71 MPa.(2)The initial tooth displacement under the device demonstrated a rotational trend.The peak equivalent stress in the periodontal ligament was concentrated at the neck,while lower stress was observed in the apex region.(3)The safety and feasibility of the personalized orthodontic device designed in this study for severely rotated single-rooted teeth were preliminarily verified through finite element analysis.

BACKGROUND:Based on the principle of vertical tooth movement,a personalized orthodontic appliance is created through digital design combined with 3D printing,so that the personalized orthodontic appliance forms a support system with the individual incisors.With the help of the absolute support of the micro-implant,the single tooth is precisely controlled in a three-dimensional direction.OBJECTIVE:To design personalized orthodontic appliances with 11,12,21,and 22 intrusion and extrusion based on biomechanical principles,and analyze the safety of the personalized orthodontic appliances in terms of their movement effect on the teeth by means of the three-dimensional finite element method.METHODS:Three-dimensional finite element models of alveolar bone-periodontium-maxillary incisors-personalized cantilever micro-implant-connecting plates-personalized brackets in the maxillary anterior region(teeth numbers 11,12,21,and 22)were established using Mimics,Geomagic Wrap,SolidWorks,and Ansys Workbench software,respectively.Personalized orthodontic appliances with low pressure movement and extended movement were set up at each tooth position.The stress level of each component of the personalized orthodontic appliances was analyzed,and the tooth displacement and periodontal stress distribution were calculated under loading of 300 g tensile or thrust force.RESULTS AND CONCLUSION:(1)The maximum equivalent force on the personalized intrusion mobile orthodontic appliance was 162.90 MPa,and the maximum equivalent force on the personalized extrusion mobile orthodontic appliance was 239.57 MPa.The maximum equivalent stress on both devices was located in the vertical portion of the personalized bracket loading attachment.The equivalent stresses on each part of the personalized orthodontic appliance were all within the yield strength,and they had good safety.(2)The initial displacement of the teeth under the action of the personalized orthodontic appliances showed a tendency towards overall intrusion or extrusion,with the displacement in the vertical direction far exceeding that in the horizontal and sagittal directions.The equivalent stress peak appeared at the root tip or neck of the periodontal membrane,and the equivalent stress concentration area appeared in the periodontal membrane of the root apical region.(3)The results show that the personalized orthodontic appliance allows 11,12,21,and 22 to approximate either intrusion movement or extrusion movement,initially confirming the effectiveness of the personalized vertical movement orthodontic appliance.

Aim To investigate the effect of triptolide(TP)on corticosterone(CORT)-induced depression-like behaviors in mice and explore the antidepressant mechanism of TP based on the CREB/BDNF/TrkB sig-naling pathway.Methods Sixty 8-week-old male C57BL/6J mice were randomly divided into five groups:control group,CORT group,TP groups of low and high doses(10,30 μg·kg-1),and fluoxetine(FLU)group(10 mg·kg-1).Except for the control group,the other groups received subcutaneous injec-tions of CORT for three consecutive weeks to establish the model of depression.During the last two weeks of modeling,normal saline,TP and FLU were adminis-tered via intraperitoneal injection respectively.After the administration,depression-like behaviors in mice were assessed using forced swimming test,tail suspen-sion test,and sucrose preference test.Biochemical methods were used to measure the levels of SOD and MDA in the hippocampus and prefrontal cortex(PFC).Cell apoptosis was detected by TUNEL meth-od.Immunohistochemistry,immunofluorescence,and Western blotting were employed to detect the expres-sion of apoptosis/autophagy-related proteins,synaptic structure markers,and proteins related to the CREB/BDNF/TrkB signaling pathway.Results TP signifi-cantly ameliorated CORT-induced depression-like be-haviors in mice,mainly manifested by reduced immo-bility time in the tail suspension test and forced swim-ming test,and increased sucrose preference rate.TP alleviated CORT-induced oxidative stress by increasing SOD levels and reducing MDA production in brain tis-sue.Additionally,TP also inhibited apoptosis and ex-cessive autophagy of neurons in the hippocampus and prefrontal cortex,maintained synaptic plasticity,and significantly upregulated the expression of p-CREB,BDNF,and TrkB.Conclusions TP exhibits potential antidepressant effect in mice by upregulating the CREB/BDNF/TrkB signaling pathway,reducing oxida-tive stress,inhibiting excessive neuronal apoptosis and autophagy,and improving synaptic plasticity.

AIM: To investigate the effects of insulin-like growth factor 1(IGF-1)on the secretion of transforming growth factor β2(TGF-β2), matrix metalloproteinase 2(MMP-2)and hypoxia-inducible factor 1α(HIF-1α)in human scleral fibroblasts(HSF)and their mechanism.METHODS: The cells were cultured with IGF-1 and PI3K/AKT pathway inhibitor LY294002, respectively. CCK-8 method was used to detect cell viability and determine the optimal concentration and time of drug action. Cell migration activity was observed by cell scratch method. To determine the effects of IGF-1 on HSF cells and the regulatory role of PI3K/AKT pathway, HSF cells were divided into control group(without drugs), IGF-1(80 μg/L)group, IGF-1+LY294002(80 μg/L+5 mmol/L)group, and LY294002(5 mmol/L)group, and were cultured for 24 h; the protein expression levels of TGF-β2, MMP-2, HIF-1α, PI3K and AKT were detected by Western blot; the fluorescence expression of TGF-β2, MMP-2 and HIF-1α was detected by cellular immunofluorescence.RESULTS: The results of CCK-8 showed that the cell viability of the 80 μg/L IGF-1 group cultured with different concentrations of IGF-1 was the highest(all P<0.05), and the cell viability of the 80 μg/L IGF-1 group at 24 h was the highest under different culture times. Therefore, the concentration of IGF-1 was selected as 80 μg/L for 24 h. The viability of cells cultured with different concentrations of LY294002 gradually decreased from 6 h(all P<0.05). According to the IC50 value, therefore, the concentration of LY294002 was selected as 5 mmol/L for 24 h. The cell scratch results showed that compared with the control group, the cell mobility of 40 μg/L and 80 μg/L IGF-1 groups was increased(all P<0.05). Compared with the control group, cell mobility in the 2.5 and 5 mmol/L LY294002 groups was decreased(all P<0.05). Western blot results showed that compared with the control group, the protein expressions of TGF-β2, MMP-2, HIF-1α, PI3K and AKT in the IGF-1 group were increased, while those in the LY294002 group were decreased(all P<0.05). Compared with the IGF-1 group, the expression levels of TGF-β2, MMP-2, HIF-1α, PI3K and AKT in the IGF-1+LY294002 group were decreased(all P<0.05). The results of cell immunofluorescence showed that compared with the control group, the fluorescence expressions of TGF-β2, MMP-2 and HIF-1α in the IGF-1 group were increased, while those in the LY294002 group were decreased(all P<0.05). Compared with the IGF-1 group, the fluorescence expressions of TGF-β2, MMP-2 and HIF-1α in the IGF-1+LY294002 group were significantly decreased(all P<0.05).CONCLUSION: IGF-1 promoted the proliferation and migration of human HSF. IGF-1 may up-regulate the expression of TGF-β2, MMP-2 and HIF-1α in HSF through the PI3K/AKT signaling pathway, and participate in the occurrence and development of myopia.