ObjectiveThe widespread adoption of portable fundus cameras for primary care and community screening is hindered by limitations in current autofocus(AF) technologies. Image-based methods relying on sharpness evaluation require iterative searches, resulting in slow convergence, while projection-based techniques are susceptible to optical artifacts and calibration errors. To address these challenges, this study introduces a novel AF system based on direct wavefront sensing, designed to deliver simultaneous high speed, high precision, and operational robustness within the compact form factor essential for portable ophthalmic devices. MethodsOur approach fundamentally reimagines the AF process by directly measuring the ocular wavefront aberration. We developed a custom portable fundus camera integrating a miniaturized Shack-Hartmann wavefront sensor (SHWS) into the optical path. An 850 nm laser diode projects a point source onto the retina via oblique illumination to minimize corneal reflections. Light scattered from this spot carries the eye’s refractive error through the imaging optics and is directed to the SHWS, positioned at a plane optically conjugate to the primary color CMOS imaging sensor. A microlens array within the SHWS samples the incident wavefront, generating a pattern of focal spots on a CCD. Real-time centroid analysis of these spots provides a map of local wavefront slopes. These measurements are processed through a singular value decomposition (SVD) algorithm to fit a Zernike polynomial basis set, enabling real-time reconstruction of the wavefront phase. The defocus component (S) is extracted from the second-order Zernike coefficients, providing a direct, quantitative measure of the refractive error in diopters. This value serves as a precise error signal in a closed-loop control system, which commands a voice-coil actuated focusing lens to its null position in a single, deterministic step, eliminating the need for iterative search algorithms. ResultsComprehensive evaluation demonstrated the system’s high performance. Testing on a calibrated model eye (OEMI-7) established a highly linear relationship between the computed defocus S and the focusing lens position across a ±20 Diopter (D) compensation range, achievable within a 5 mm mechanical travel. The system achieved a focusing precision of 0.08 D, corresponding to an 18-fold improvement over a conventional projection spot-size method tested under identical conditions. The total focus acquisition time, encompassing wavefront measurement, computation, and lens actuation, averaged under 0.5 s. Clinical validation with 25 human volunteers (50 eyes, refractive range -15 D to +10 D) confirmed practical efficacy. The wavefront-sensing AF succeeded in 92% of attempts with a mean time of 0.5 s, substantially outperforming a projection-based benchmark which achieved only a 32% success rate with an average time of 4.25 s. The system provided instantaneous directional guidance and maintained stability during minor ocular movements. Objective assessment of image quality, via amplitude contrast of retinal vasculature, showed consistent and significant enhancement following AF correction across the entire tested diopter range. ConclusionThis work successfully implements and validates a direct wavefront-sensing autofocus paradigm for portable fundus cameras. By directly quantifying and compensating for the optical defocus aberration, this method bypasses the fundamental limitations of image-processing and projection-based techniques, enabling rapid, precise, and deterministic diopter compensation. The developed system delivers an exceptional combination of a wide operational range (±20 D), high accuracy (0.08 D), fast convergence (0.5 s), and a compact physical footprint. This technology provides a practical and high-performance focusing solution capable of enhancing the reliability, throughput, and diagnostic utility of portable retinal imaging in large-scale screening applications. Future efforts will be directed towards system cost optimization and performance adaptation for diverse ocular conditions.

OBJECTIVE To systematically review the status on pharmacist competency assessment tools both domestically and internationally， providing a theoretical basis for constructing scientific and applicable pharmacist competency assessment tools in China. METHODS Through literature review and comparative analysis， 15 representative domestic and international pharmacist competency assessment tools were systematically summarized， and their theoretical foundations， core dimensions， methodological characteristics and practical applications were compared and implications were given. RESULTS &CONCLUSIONS International research has established relatively mature evaluation systems. Represented by those developed from the United Kingdom， the United States， and the International Pharmaceutical Federation， these assessment tools demonstrate scientific structure， wide application， and dynamic and international applicability. While domestic research has progressed in sub-specialties such as clinical pharmacists， licensed pharmacists and pediatric pharmacists， it still faces challenges including insufficient standardization， inadequate validation， delayed updates， and limitations in practical application. The reasons for the disparities in assessment tools between China and other countries include differences in pharmaceutical care models， varying pharmacist training systems， cultural and social background factors， as well as differences in industry management and international influence. Based on this， the author suggests promoting the development and research of assessment tools for pharmacist job competency in China from four aspects： mechanism construction， system refinement， standardization development， and practical implementation.

OBJECTIVE: To explore the serological and molecular genetic characteristics of a family with subtype B(A)06. METHODS: A neonatal hyperbilirubinemia patient who was treated at Henan Children's Hospital on June 15, 2023 due to "yellowing of the skin and gradual aggravation", and was found to have inconsistent ABO forward and reverse typing through blood type testing, was selected as the research subject. Six milliliters of peripheral blood were collected from the newborn and her family members (grandfather, grandmother, father, mother and aunt) respectively. ABO blood group identification was performed by the blood group serological method. Human genomic DNA was extracted using the nucleic acid extraction or purification reagent BT-01. ABO gene exons 2 to 7 were amplified by PCR. The PCR-specific products that were successfully amplified were sequenced by Sanger method. Taking ABO*A1.01 as the reference sequence, the ABO gene sequences of the newborn and her family members were analyzed to determine the ABO genotype. The procedures followed in this study were approved by the Ethics Committee of Henan Children's Hospital (Ethics No.: 2022-K-L036). RESULTS: The serological results of ABO blood group showed that the newborn, her grandfather, father and aunt were all incompatible with the forward and reverse typing. The blood group phenotype of the newborn was AwB or B(A), the blood group phenotype of the grandfather was A2B or B(A), the blood group phenotype of the father and aunt were A2B, and the blood group phenotype of the grandmother and mother were both O. The screening test results of hemolytic disease of the newborn showed that the free test detected IgG anti-A1 antibody, while the elution test, direct antiglobulin test and antibody screening results were all negative. The Sanger sequencing results showed that the newborn had variations of c.261delG, c.297A>G, c.526C>G, c.657C>T, c.703G>A, c.796C>A and c.930G>A. Her grandfather had variations of c.297A>G, C.526C>G, c.657C>T, c.703G>A, c.796C>A, c.803G>C and c.930G>A. Her grandmother had variations of c.106G>T, c.188G>A, c.189C>T, c.220C>T, c.261delG, c.297A>G, c.646T>A, c.681G>A, c.771C>T and c.829G>A. Her father and aunt had variations of c.106G>T, c.188G>A, c.189C>T, c.220C>T, c.261delG, c.297A>G, c.526C>G, c.646T>A, c.657C>T, c.681G>A, c.703G>A, c.771C>T, c.796C>A, c.829G>A and c.930G>A. Her mother had variations of c.106G>T, c.188G>A, c.189C>T, c.220C>T, c.261delG, c.297A>G, c.646T>A, c.681G>A, c.771C>T, and c.829G>A.The genotype of the newborn was ABO*BA.06/ABO*O.01.01, her grandfather was ABO*BA.06/ABO*B.01, her grandmother was ABO*O.01.02/ABO*O.01.02, her father and aunt were ABO*BA.06/ABO*O.01.02, and her mother was ABO*O.01.01/ABO*O.01.02. The ABO*BA.06 allele of the newborn, grandfather, father and aunt was caused by the c.803C>G variation in exon 7 based on the ABO*B.01 allele. The ABO*BA.06 allele can be stably inherited in this family. CONCLUSION The blood type of neonatal patients with B(A)06 subtype can be accurately determined by gene sequencing technology. If the forward typing is ≤ 3+ agglutination intensity in newborn ABO blood group identification, the reason should be carefully analyzed, and the molecular biology technology and family gene sequencing results should be used to jointly determine if necessary.
Humans ; ABO Blood-Group System/genetics* ; Female ; Pedigree ; Male ; Infant, Newborn ; Asian People/genetics* ; Genotype ; China ; Blood Grouping and Crossmatching ; Hyperbilirubinemia, Neonatal/blood* ; East Asian People

BACKGROUND:Due to the complex movement of the scapula,which is a six-degree-of-freedom activity in three-dimensional space,it is difficult to measure it accurately using traditional methods.The image and model matching technology based on dual-plane X-ray is a three-dimensional measurement method that has gradually developed and matured in recent years.Two high-speed cameras are used to project and shoot from orthogonal directions.Compared with a single perspective,this method has advantages in observation range and reduction of out-of-plane errors,and is suitable for the study of scapula kinematics.OBJECTIVE:X-ray biplane and image-model registration technology were used to explore the differences in scapular kinematics between normal individuals and patients with rotator cuff tears,providing a basis for the treatment and rehabilitation of rotator cuff tear patients.METHODS:From April 2023 to January 2024,10 patients with normal shoulders and 10 patients with rotator cuff tears who met the inclusion criteria were enrolled from Guanghua Hospital Affiliated to Shanghai University of Traditional Chinese Medicine.The subjects underwent a shoulder CT scan to create a 3D model and a local scapular coordinate system.X-ray biplane images were taken during shoulder abduction with two C-arm machines.The 2D and 3D images were registered to compare scapular kinematic differences between the two groups at 0°,15°,30°,45°,60°,75°,and 90° of abduction,including scapular rotation angle and displacement distance.RESULTS AND CONCLUSION:(1)During shoulder abduction,the scapula of both groups showed upward rotation,but the upward rotation of the rotator cuff tear group was greater than that of the control group,and the difference was significant when the abduction was 30°-90°(P＜0.01).At the same time,the scapula internal rotation of both groups gradually increased,but the rotator cuff tear group was significantly greater than the control group when the abduction was 45°-90°(P＜0.01).In addition,the anteroposterior tilt of the scapula of the two groups was significantly different when the abduction was 15°-90°(P＜0.01).The scapula posterior tilt of the control group gradually increased during abduction,while the scapula of the rotator cuff tear group tilted forward except for a slight posterior tilt at 15°-30° abduction.(2)In terms of displacement,the upward displacement of the rotator cuff tear group was less than that of the control group during abduction,and the difference was significant at 15°-90°(P＜0.05),but there was no significant difference in lateral and anterior-posterior displacement between the two groups(P＞0.05).(3)Rotator cuff tear can cause scapular dyskinesis,characterized by increased upward rotation,internal rotation,and abnormal forward tilt during shoulder abduction.Identifying and addressing scapular dyskinesis is crucial for treating rotator cuff tear.

BACKGROUND:Due to the complex movement of the scapula,which is a six-degree-of-freedom activity in three-dimensional space,it is difficult to measure it accurately using traditional methods.The image and model matching technology based on dual-plane X-ray is a three-dimensional measurement method that has gradually developed and matured in recent years.Two high-speed cameras are used to project and shoot from orthogonal directions.Compared with a single perspective,this method has advantages in observation range and reduction of out-of-plane errors,and is suitable for the study of scapula kinematics.OBJECTIVE:X-ray biplane and image-model registration technology were used to explore the differences in scapular kinematics between normal individuals and patients with rotator cuff tears,providing a basis for the treatment and rehabilitation of rotator cuff tear patients.METHODS:From April 2023 to January 2024,10 patients with normal shoulders and 10 patients with rotator cuff tears who met the inclusion criteria were enrolled from Guanghua Hospital Affiliated to Shanghai University of Traditional Chinese Medicine.The subjects underwent a shoulder CT scan to create a 3D model and a local scapular coordinate system.X-ray biplane images were taken during shoulder abduction with two C-arm machines.The 2D and 3D images were registered to compare scapular kinematic differences between the two groups at 0°,15°,30°,45°,60°,75°,and 90° of abduction,including scapular rotation angle and displacement distance.RESULTS AND CONCLUSION:(1)During shoulder abduction,the scapula of both groups showed upward rotation,but the upward rotation of the rotator cuff tear group was greater than that of the control group,and the difference was significant when the abduction was 30°-90°(P＜0.01).At the same time,the scapula internal rotation of both groups gradually increased,but the rotator cuff tear group was significantly greater than the control group when the abduction was 45°-90°(P＜0.01).In addition,the anteroposterior tilt of the scapula of the two groups was significantly different when the abduction was 15°-90°(P＜0.01).The scapula posterior tilt of the control group gradually increased during abduction,while the scapula of the rotator cuff tear group tilted forward except for a slight posterior tilt at 15°-30° abduction.(2)In terms of displacement,the upward displacement of the rotator cuff tear group was less than that of the control group during abduction,and the difference was significant at 15°-90°(P＜0.05),but there was no significant difference in lateral and anterior-posterior displacement between the two groups(P＞0.05).(3)Rotator cuff tear can cause scapular dyskinesis,characterized by increased upward rotation,internal rotation,and abnormal forward tilt during shoulder abduction.Identifying and addressing scapular dyskinesis is crucial for treating rotator cuff tear.

ObjectiveTo establish a geographical origin identification model for Foeniculi Fructus from Haiyuan， providing a new technical reference for the protection of Haiyuan's geo-authentic medicinal materials and its designation as a national geographical indication agricultural product. MethodsSamples of Foeniculi Fructus were collected from eight producing areas， including Minqin （Gansu）， Bozhou （Anhui）， Qingdao （Shandong）， Dezhou （Shandong）， Urumqi （Xinjiang）， Nujiang （Yunnan）， Gutuo （Inner Mongolia）， and Haiyuan （Ningxia）. Gas chromatography-ion mobility spectrometry （GC-IMS） was used to detect the volatile organic compounds （VOCs） in samples from these geographic origins. VOCs were qualitatively analyzed through dual matching with the National Institute of Standards and Technology （NIST） mass spectral database and the IMS drift time database. Using the Reporter module and Gallery Plot visualization tools within the LAV analytical platform， VOC fingerprint profiles characterizing geographic origins were constructed. A non-targeted analytical strategy was adopted， and 97 VOCs detected via GC-IMS were subjected to principal component analysis （PCA） and partial least squares discriminant analysis （PLS-DA） based on their differential distribution patterns to construct an origin identification model for Foeniculi Fructus from Haiyuan region. Key discriminative markers were screened using variable importance in projection （VIP） values greater than 1. ResultsA total of 97 VOCs were identified， including alcohols， aldehydes， ketones， esters， organic acids， terpenoids， ethers， alkenes， and benzenes. The PLS-DA model， based on VOCs data obtained by GC-IMS， effectively distinguished Foeniculi Fructus in Haiyuan region from those of other origins. During cross-validation， the model achieved a prediction parameter （Q²） of 0.976 and a goodness-of-fit parameter （R²） of 0.936， with no overfitting observed in permutation testing. Twelve key flavor markers with VIP > 1 were identified as characteristic indicators of Haiyuan origin. ConclusionA stable and highly predictive origin identification model for Foeniculi Fructus from Haiyuan was successfully established using GC-IMS technology， PLS-DA， and VIP-based marker screening. This model provides a novel technical strategy for accurately distinguishing Foeniculi Fructus in Haiyuan region from other regional varieties and offers new technical support for its protection as a geo-authentic medicinal material and a nationally designated geographical indication agricultural product in China.

ObjectiveTo establish a geographical origin identification model for Foeniculi Fructus from Haiyuan， providing a new technical reference for the protection of Haiyuan's geo-authentic medicinal materials and its designation as a national geographical indication agricultural product. MethodsSamples of Foeniculi Fructus were collected from eight producing areas， including Minqin （Gansu）， Bozhou （Anhui）， Qingdao （Shandong）， Dezhou （Shandong）， Urumqi （Xinjiang）， Nujiang （Yunnan）， Gutuo （Inner Mongolia）， and Haiyuan （Ningxia）. Gas chromatography-ion mobility spectrometry （GC-IMS） was used to detect the volatile organic compounds （VOCs） in samples from these geographic origins. VOCs were qualitatively analyzed through dual matching with the National Institute of Standards and Technology （NIST） mass spectral database and the IMS drift time database. Using the Reporter module and Gallery Plot visualization tools within the LAV analytical platform， VOC fingerprint profiles characterizing geographic origins were constructed. A non-targeted analytical strategy was adopted， and 97 VOCs detected via GC-IMS were subjected to principal component analysis （PCA） and partial least squares discriminant analysis （PLS-DA） based on their differential distribution patterns to construct an origin identification model for Foeniculi Fructus from Haiyuan region. Key discriminative markers were screened using variable importance in projection （VIP） values greater than 1. ResultsA total of 97 VOCs were identified， including alcohols， aldehydes， ketones， esters， organic acids， terpenoids， ethers， alkenes， and benzenes. The PLS-DA model， based on VOCs data obtained by GC-IMS， effectively distinguished Foeniculi Fructus in Haiyuan region from those of other origins. During cross-validation， the model achieved a prediction parameter （Q²） of 0.976 and a goodness-of-fit parameter （R²） of 0.936， with no overfitting observed in permutation testing. Twelve key flavor markers with VIP > 1 were identified as characteristic indicators of Haiyuan origin. ConclusionA stable and highly predictive origin identification model for Foeniculi Fructus from Haiyuan was successfully established using GC-IMS technology， PLS-DA， and VIP-based marker screening. This model provides a novel technical strategy for accurately distinguishing Foeniculi Fructus in Haiyuan region from other regional varieties and offers new technical support for its protection as a geo-authentic medicinal material and a nationally designated geographical indication agricultural product in China.

Traditional Chinese Medicine (TCM), as a treasure of the Chinese nation, plays a significant role in maintaining public health. In 2019, the Central Committee of the Communist Party of China and the State Council proposed for the first time the establishment of a TCM registration and evaluation evidence system that integrates TCM theory, "personal experience" and clinical trials (referred to as the "Three-in-One" System) to promote the inheritance and innovation of TCM. Subsequently, the National Medical Products Administration issued several guiding principles to advance the improvement and implementation of this system. Owing to the complexity of its implementation, there are still differing understandings within the TCM industry regarding the positioning of the "Three-in-One" Registration and Evaluation Evidence System, as well as the connotation and value orientation of the "personal experience." To address this, Academician WANG Qi, President of the TCM Association, China International Exchange and Promotion Association for Medical and Healthcare and TCM master, led a group of academicians, TCM masters, TCM pharmacology experts and clinical TCM experts to convene a "Seminar on Promoting the Implementation of the ′Three-in-One′ Registration and Evaluation Evidence System for Chinese Medicinals." Through extensive discussions, an expert consensus was formed, clarifying the different roles of the TCM theory, "personal experience" and clinical trials within the system. It was further emphasized that the "personal experience" is the core of this system, and its data should be derived from clinical practice scenarios. In the future, the improvement of this system will require collaborative efforts across multiple fields to promote the high-quality development of the Chinese medicinal industry.

BACKGROUND: As an essential part of health services, rehabilitation is of great significance to improve the health and quality of life of the whole population. Accelerating aging calls for a significant expansion of rehabilitation services in China, but rehabilitation needs remain unclear. We conducted the study to explore the rehabilitation needs in China and project the trend of rehabilitation needs from 2020 to 2034. METHODS: The data of health conditions that might potentially benefit from rehabilitation were obtained from Global Burden of Disease (GBD) study. Estimated annual percentage changes (EAPCs) were calculated to quantify the trends of the age-standardized rates. Projections of rehabilitation needs were made until 2034 using Bayesian age-period-cohort analysis (BAPC). RESULTS: Approximately 460 million persons (33.3% of the total population) need rehabilitation in China, contributing to 63 million years lived with disabilities (YLDs) in 2019. The number of prevalent cases that need rehabilitation increased from around 268 (95% uncertainty interval [UI]: 257-282) million in 1990 to almost 460 (95% UI: 443-479) million in 2019, representing an increase of 71.3%. The highest contribution to the need for rehabilitation was musculoskeletal disorders with about 322 (95% UI: 302-343) million persons in seven aggregate disease and injury categories, and hearing loss with over 95 (95% UI: 84-107) million people among 25 health conditions. Based on the projection results, there will be almost 636 million people (45% of the total population) needing rehabilitation services in China by 2034, representing an increase of 38.3%. The rehabilitation needs of neoplasms, cardiovascular diseases, and neurological disorders are expected to increase significantly from 2019 to 2034, with increases of 102.3%, 88.8% and 73.2%, respectively. CONCLUSIONS The need for rehabilitation in China substantially increased over the last 30 years. It is predicted that over two in five people will require rehabilitation by 2034, thus suggesting the need to develop rehabilitation services that meet individuals' rehabilitation needs.
Humans ; China/epidemiology* ; Global Burden of Disease ; Female ; Male ; Musculoskeletal Diseases/epidemiology* ; Rehabilitation/trends* ; Quality of Life ; Middle Aged ; Aged ; Bayes Theorem

This study aims to comprehensively analyze the material basis of toad visceral oil(hereafter referred to as toad oil), and explore the pharmacological effect of toad oil on atopic dermatitis(AD). Ultra-high performance liquid chromatography-linear ion trap/orbitrap high-resolution mass spectrometry(UHPLC-LTQ-Orbitrap-MS) and gas chromatography-mass spectrometry(GC-MS) were employed to comprehensively identify the chemical components in toad oil. The animal model of AD was prepared by the hapten stimulation method. The modeled animals were respectively administrated with positive drug(0.1% hydrocortisone butyrate cream) and low-and high-doses(1%, 10%) of toad oil by gavage. The effect of toad oil on AD was evaluated with the AD score, ear swelling rate, spleen index, and pathological section results as indicators. A total of 99 components were identified by UHPLC-LTQ-Orbitrap-MS, including 14 bufadienolides, 7 fatty acids, 6 alkaloids, 10 ketones, 18 amides, and other compounds. After methylation of toad oil samples, a total of 20 compounds were identified by GC-MS. Compared with the model group, the low-and high-dose toad oil groups showed declined AD score, ear swelling rate, and spleen index, alleviated skin lesions, and reduced infiltrating mast cells. This study comprehensively analyzes the chemical composition and clarifies the material basis of toad oil. Meanwhile, this study proves that toad oil has a good therapeutic effect on AD and is a reserve resource of traditional Chinese medicine for external use in the treatment of AD.
Animals ; Dermatitis, Atopic/immunology* ; Disease Models, Animal ; Mice ; Male ; Gas Chromatography-Mass Spectrometry ; Humans ; Bufonidae ; Oils/administration & dosage* ; Chromatography, High Pressure Liquid ; Female ; Mice, Inbred BALB C