In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

Background Polycyclic aromatic hydrocarbons (PAHs) readily adsorb onto the surface of fine particulate matter (PM_2.5) and are representative components of organic pollutants in the atmosphere. PAHs are known for their significant carcinogenic, teratogenic, and mutagenic toxicity, and long-term exposure to PAHs has adverse effects on human health. Objective To investigate the concentration, composition, and pollution sources of 16 priority PAHs in PM_{2. 5} of Yanta District, Xi'an, and to evaluate the associated health risks. Methods PM_2.5 samples were collected from March 2023 to February 2024. The concentrations of 16 PAHs (ΣPAHs) were determined by high performance liquid chromatography (HPLC). Diagnostic ratios (DR) and positive matrix factorization (PMF) were used to identify the sources of PAHs. Pearson correlation analysis was applied to examine the relationship between PAHs concentrations and meteorological factors. Furthermore, the toxicity of individual PAHs was converted into benzo[a]-pyrene (BaP) toxicity equivalents to calculate the toxicity of total PAHs. An incremental lifetime carcinogenic risk (ILCR) model was established to evaluate the health risks of PAHs inhalation across different demographic groups. Results The average concentration of ΣPAHs in PM_2.5 of Yanta District, Xi'an followed a seasonal descending order: winter (15.71 ng·m⁻³) > spring (5.55 ng·m⁻³) > autumn (4.34 ng·m⁻³) > summer (1.47 ng·m⁻³). The relative abundances of PAHs in PM_2.5 varied significantly by ring number, 4-ring PAHs accounted for the largest proportion, followed by 5-ring, 3-ring and 6-ring PAHs, while 2-ring PAHs were the least abundant. This ring distribution pattern remained consistent across seasons. The contribution rates of different emission sources to ΣPAHs concentration exhibited seasonal variations. Source apportionment revealed that industrial and traffic emissions were major contributors in spring; traffic emissions dominated in summer and autumn; and coal, natural gas, and biomass combustion were the predominant sources in winter. Correlation analysis showed that ΣPAHs concentration was highly positively correlated with atmospheric pressure and negatively correlated with temperature, but not significantly correlated with precipitation, wind speed, solar radiation, and relative humidity. The ILCR model indicated significant seasonal differences (winter > spring > autumn > summer) in inhalation health risks between adults and children, primarily due to variations in inhalation rates and body weight. Adults faced higher health risks than children across all seasons. Conclusion PAHs pollution in PM_2.5 of Yanta District, Xi 'an is primarily driven by traffic emissions and the combustion of coal, natural gas, and biomass. PAHs concentrations are significantly influenced by meteorological factors, particularly air pressure, and temperature. Inhalation exposure poses distinct health risks to adults in winter. To effectively reduce ΣPAHs concentrations and mitigate air pollution, emission controls on winter coal combustion should be prioritized.

The medical mask,which is used as an important tool of preventing the spread of respiratory diseases,can effectively block the transmission of biological aerosols.The detection for the filtration efficiency of bacteria in medical mask is particular importance.The Andersen sampler,is one kind of device that samples microbial aerosols,is widely used in the inspection for the filtration efficiency for bacteria in medical masks.It mainly consists of six impactors with different pore sizes.It simulates the deposition process of the most of particles at different positions in respiratory system through the bacterial particles in biological aerosols impact respectively the surface of petri dishes with agar under different pore sizes.This paper explored the development background,structure and sampling principle,operation and counting procedures of the Andersen sampler,as well as its application and importance in the inspection for the filtration efficiency for bacteria in medical mask.

As a cheap and effective antibiotic,sulfonamides are often used in animal husbandry.However,their residues in animal-derived foodstuffs will threaten human health.Consequently,a high-performance liquid chromatography(HPLC)method integrated with supramolecular solvent microextraction was successfully established for simultaneous quantification of sulfonamide residues sulfachlorpyridazine,sulfamethoxazole,sulfamethoxypyridazine and sulfadimethoxine in milk matrices.This approach exhibited prominent characteristics of operational simplicity,environmental sustainability,and high extraction efficiency.The supramolecular solvents prepared by tributyl octylphosphine tetrafluoroborate and tetrahydrofuran were employed as extraction solvents.The analytes underwent isolation and concentration via dispersive liquid-liquid microextraction(DLLME)prior to quantitative determination using high-performance liquid chromatography(HPLC).The composition and microscopic morphology of the supramolecular solvent were characterized through a series of analytical techniques,including phase diagram,Fourier transform infrared spectroscopy,scanning electron microscopy,and inverted fluorescence microscopy and so on.The density and pH value of supramolecular solvents were determined.The extraction conditions were optimized through the one-factor experiments.The experimental results demonstrated that under the optimal extraction conditions,the four kinds of sulfonamide antibiotics exhibited excellent linearity within respective detection range(R2 ≥ 0.9998)and the limits of detection(LOD)were 0.67-1.45 μg/L.Compared with literature methods,this approach offered some advantages such as simplicity of operation and less reagent consumption,and could be used for analysis and detection of sulfonamide antibiotic residues in milk samples.The present method provided technical support for food safety regulation and paved a new way for the application of supramolecular solvents in the field of extraction and separation.

Objective:To explore the clinical efficacy of staged reconstruction with anterolateral thigh flap (ALTF) for wrist-forearm soft tissue defects of electrical burns.Methods:A retrospective observational study was conducted on 10 patients who had wrist-forearm soft tissue defects after electrical burns and were admitted in the Department of Burns, Zhengzhou First People's Hospital from January 2019 to December 2022. The patients were 6 males and 4 females, aged 8 to 64 years. All the patients were third-and-fourth degree electrical burns. Debridement was performed to remove the necrotic tissues around the wound in stage I surgery. Area of the wound after debridement ranged from 15 cm×11 cm to 31 cm×20 cm. According to the condition of wrist-forearm injury, the wounds with relatively mild injury were retained. Free ALTF was used to cover the wound surface. Size of the flaps ranged from 16 cm×12 cm to 32 cm×21 cm. The descending branch of lateral circumflex femoral artery and the accompanying veins carried by the flap were anastomosed end-to-end with the radial artery and vein or ulnar artery and vein in the recipient site, respectively. Conditions of other vessels were explored. The great saphenous veins in a length of 10-18 cm was used to bridge the occluded arteries. The donor sites were covered by medium thick skin grafts from trunk. After survival of the flap, stage Ⅱ surgery was carried out to debride the wound temporarily retained in stage I surgery and to thin the flap, then had all the wound covered with the thinned flap. Follow-ups were conducted at outpatient clinic, and via telephone and WeChat interviews. The limb salvage, flap survival, vascular compromise and other complications, as well as the donor site healing were observed. The wound coverage rate of the thinned flap. The appearance of flap, donor site scar hyperplasia, the patient satisfaction with the shape and function of the donor site at 6 months after the stage Ⅱ surgery were evaluated. Likert scale was employed to evaluate the patient satisfaction. The Michigan Hand Outcomes Questionnaire (MHQ) and Disabilities of the Arm, Shoulder and Hand (DASH) were used to evaluate the upper limb function in daily life of the patients.Results:The limb salvages in the 10 patients were all successful, and the flaps survived without any postoperative event of vascular compromise or other complication. One patient had mild cyanosis at the edges of flap after surgery and regressed at 7 days later. One flap had poor blood circulation and partial necrosis. The thinned flaps covered the wound completely after the stage-Ⅱ flap thinning surgery. The postoperative follow-up period was 6.0-7.0 months. All skin grafts in the donor sites survived well. The thinned flaps of stage Ⅱ surgery achieved 100% in wound coverage rate. At 6 months after surgery, the colour and texture of the flaps were about the same as those of the normal skin of the upper limb. There were linear scars in both of donor and recipient sites. Four patients were satisfactory to the postoperative appearance and function of the donor site and 6 patients were very satisfactory. MHQ scores were 49-82 (mean, 74) points; DASH scores were 27-45 (mean, 32) points.Conclusion:Reconstruction of the wounds in wrist-forearm soft tissue defects of electrical burns with ALTF in staged surgery, can improve the function and aesthetics of the wrist-forearm. It is a good method.

Objective:To establish the diagnosis and treatment strategies of tirofiban induced extremely severe thrombocytopenia to provide reference for laboratory stuffs and clinicians in early accurate identification and appropriate intervention.Methods:This study is a single-center retrospective study. The clinical data of patients with acute coronary syndrome treated at Fuwai Central China Cardiovascular Hospital from June 1st, 2019, to December 31st, 2024, were collected. 12 cases of extremely severe thrombocytopenia following tirofiban treatment were selected based on inclusion and exclusion criteria. The cohort comprised 10 males and 2 females, with a mean age of (66.08±7.08) years old. Clinical parameters including tirofiban administration duration, platelet count fluctuations, concomitant medications, treatment strategies, and complications were collected. The clinical characteristics of the data were analyzed and diagnostic-therapeutic flowchart was summarized. Normality was assessed using the Shapiro-Wilk test, and intergroup comparisons were performed using the Paired t-test or Wilcoxon test, and a P<0.05 was considered statistically significant.Results:All 12 patients had generally normal baseline platelet counts [(166.50±35.27)×10 9/L], but developed severe thrombocytopenia [(4.00±2.98)×10 9/L] after tirofiban treatment(P<0.001). 10 patients had the lowest platelet count within 24 hours using tirofiban, and the lowest platelet count occurred at 37 hours and 42 hours in 2 patients. 11 patients discontinued antithrombotic therapy after thrombocytopenia, and 10 patients resumed antithrombotic therapy after their platelet counts recovered above 30×10 9/L. 3 patients received platelet transfusions, while 10 patients were treated with thrombopoietin agents in combination with high-dose glucocorticoid pulse therapy. The time from discontinuation of tirofiban to platelet recovery above 50×10 9/L was (2.75±1.06) days. Major complications included bleeding manifestations ( n=6) and allergic-like reactions ( n=3). Based on the above clinical diagnosis and treatment information, a diagnosis and treatment flow chart for extremely severe thrombocytopenia caused by tirofiban was developed. Conclusion:When using tirofiban in clinical practice, platelet count should be monitored as early as possible to promptly identify tirofiban-induced extremely severe thrombocytopenia. The antithrombotic regimen and platelet-increasing treatment should be dynamically adjusted based on the patient′s condition.

The medical mask,which is used as an important tool of preventing the spread of respiratory diseases,can effectively block the transmission of biological aerosols.The detection for the filtration efficiency of bacteria in medical mask is particular importance.The Andersen sampler,is one kind of device that samples microbial aerosols,is widely used in the inspection for the filtration efficiency for bacteria in medical masks.It mainly consists of six impactors with different pore sizes.It simulates the deposition process of the most of particles at different positions in respiratory system through the bacterial particles in biological aerosols impact respectively the surface of petri dishes with agar under different pore sizes.This paper explored the development background,structure and sampling principle,operation and counting procedures of the Andersen sampler,as well as its application and importance in the inspection for the filtration efficiency for bacteria in medical mask.

Objective:To analyze the MYH9 gene sequence of a patient with hereditary thrombocytopenia and diffuse large B-cell lymphoma and his family members,and to explore the relationship between MYH9 gene and tumors.Methods:Peripheral blood samples were collected from the patients and their family members for complete blood count analysis.The platelet morphology was observed under microscope.The MYH9 gene sequence was analyzed by Whole Exon Sequencing and Sanger Sequencing.Results:The mutation site c.279C＞A:p.(Asn93Lys)in exon 2 of the MYH9 gene were found in patient and his family members,both presenting as thrombocytopenia.The platelet count was significantly increased after the administration of Avatrombopag.Conclusion:A novel mutation of MYH9 was found in this study,and the case was sensitive to Avatrombopag,by exploring the relationship between the MYH9 gene and tumors,suggesting that the MYH9 gene may be associated with the development of diffuse large B-cell lymphoma.

BACKGROUND:Large deep burn wounds are often accompanied by scar hyperplasia after healing,requiring transplantation of medium-thickness skin for repair,and the medium-thickness skin slices taken generally reach below the papillary layer of the dermis.If not handled correctly,complications such as delayed healing,ulceration,and post-healing pain and itching in the donor area can easily occur.Therefore,the repair of wounds in the donor area should be emphasized.OBJECTIVE:To observe the safety and practicability of autologous scalp repair of skin donor area in patients with deep burns and scarring.METHODS:Sixty patients with deep burn and scar hyperplasia admitted to the Burn Department of Zhengzhou First People's Hospital from January 2021 to September 2023 were selected as the study subjects.They all needed medium-thickness skin transplantation and repair,and were divided into study group(n=30)and control group(n=30)according to random systematic sampling method.The skin was taken from the patient's own medium-thickness skin on the leg or back.In the study group,the skin donor area was repaired with self-blade thick scalp replantation,and in the control group,the skin donor area was repaired with absorbent dressing.The wound healing rate and the time to complete epithelialization of the wound were observed and compared in the two groups 6 days after surgery.The pain of dressing change at 3 and 6 days after surgery and scar hyperplasia in the skin donor area at 6 months after surgery were compared between two groups.RESULTS AND CONCLUSION:Compared with the control group,the time to complete epithelialization of the wound was significantly lower in the study group(P<0.05),and the wound healing rate was significantly higher in the study group(P<0.05),the pain score for dressing change at 3 and 6 days after surgery was significantly lower in the study group(P<0.05),and the scar hyperplasia rate,scar score and itch score were also significantly lower in the study group(P<0.05)at 6 months after surgery.In conclusion,autologous scalp repair of the medium-thickness skin donor area can accelerate wound healing and reduce scar hyperplasia.